当前位置：文档库 › 华擎主板B95M-DGS

华擎主板B95M-DGS

B95M-DGS

Version 1.0

Published May 2014

No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:

Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for

any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or fitness for a particular purpose.

In no event shall ASRock, its directors, officers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of profits, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see https://www.wendangku.net/doc/0f229031.html,/hazardouswaste/ perchlorate”

ASRock Website: https://www.wendangku.net/doc/0f229031.html,

Contents

Chapter 1 Introduction 1 1.1 Package Contents 1 1.2 Specifications 2 1.3 Motherboard Layout 5 1.4 I/O Panel 7 Chapter 2 Installation 8 2.1 Installing the CPU 9 2.2 Installing the CPU Fan and Heatsink 12 2.3 Installing Memory Modules (DIMM) 13 2.4 Expansion Slots (PCI Express Slots) 15 2.5 Jumpers Setup 16 2.6 Onboard Headers and Connectors 17 Chapter 3 Software and Utilities Operation 22 3.1 Installing Drivers 22 3.2 A-Tuning 23 3.3 Intel? Rapid Start Technology 29 3.4 Intel? Smart Connect Technology 34 3.5 ASRock Cloud 39 3.6 ASRock APP Shop 49 3.6.1 UI Overview 49 3.6.2 Apps 50 3.6.3 BIOS & Drivers 53

3.6.4 Setting 54 3.7 Start8 55 Chapter 4 UEFI SETUP UTILITY 58

4.1 Introduction 58 4.1.1 UEFI Menu Bar 58 4.1.2 Navigation Keys 59 4.2 Main Screen 60 4.3 OC Tweaker Screen 61 4.4 Advanced Screen 69 4.4.1 CPU Configuration 70 4.4.2 Chipset Configuration 72 4.4.3 Storage Configuration 74 4.4.4 Intel? Rapid Start Technology 75 4.4.5 Intel? Smart Connect Technology 76 4.4.6 Super IO Configuration 77 4.4.7 ACPI Configuration 78 4.4.8 USB Configuration 80 4.4.9 Trusted Computing 82 4.5 Tools 83 4.6 Hardware Health Event Monitoring Screen 86 4.7 Boot Screen 87 4.8 Security Screen 90 4.9 Exit Screen 91

B95M-DGS

1E n g l i s h

English

1.2 Specifications

Platform? Micro ATX Form Factor

? Solid Capacitor design

? High Density Glass Fabric PCB

CPU? Supports New 4th and 4th Generation Intel? Core TM i7/i5/i3/

Xeon?/Pentium?/Celeron? Processors (Socket 1150)

? Supports Intel? Turbo Boost 2.0 Technology

Chipset? Intel? B85

Memory? Dual Channel DDR3 Memory Technology

? 2 x DDR3 DIMM Slots

? Supports DDR3 1600/1333/1066 non-ECC, un-buffered

memory

? Max. capacity of system memory: 16GB (see CAUTION)

? Supports Intel? Extreme Memory Profile (XMP) 1.3 / 1.2 Expansion

Slot

? 1 x PCI Express 3.0 x16 Slot (PCIE1: x16 mode)

? 1 x PCI Express 2.0 x1 Slot

Graphics? Intel? HD Graphics Built-in Visuals and the VGA outputs can

be supported only with processors which are GPU integrated.

? Supports Intel? HD Graphics Built-in Visuals : Intel? Quick

Sync Video with AVC, MVC (S3D) and MPEG-2 Full

HW Encode1, Intel? InTru TM 3D, Intel? Clear Video HD

Technology, Intel? Insider TM, Intel? HD Graphics 4400/4600

? Pixel Shader 5.0, DirectX 11.1

? Max. shared memory 1792MB

? Dual graphics output: support DVI-D and D-Sub by

independent display controllers

? Supports DVI-D with max. resolution up to 1920x1200 @

60Hz

? Supports D-Sub with max. resolution up to 1920x1200 @

60Hz

? Supports HDCP with DVI-D Port

? Supports Full HD 1080p Blu-ray (BD) playback with DVI-D

Port

B95M-DGS

3E n g l i s h

Audio? 5.1 CH HD Audio (Realtek ALC662 Audio Codec)

? Supports Surge Protection (ASRock Full Spike Protection)

? ELNA Audio Caps

LAN? PCIE x1 Gigabit LAN 10/100/1000 Mb/s

? Realtek RTL8111GR

? Supports Wake-On-WAN

? Supports Wake-On-LAN

? Supports Lightning/ESD Protection (ASRock Full Spike

Protection)

? Supports LAN Cable Detection

? Supports Energy Efficient Ethernet 802.3az

? Supports PXE

Rear Panel I/O ? 1 x PS/2 Mouse/Keyboard Port

? 1 x D-Sub Port

? 1 x DVI-D Port

? 4 x USB 2.0 Ports (Supports ESD Protection (ASRock Full Spike Protection))

? 2 x USB 3.0 Ports (Supports ESD Protection (ASRock Full Spike Protection))

? 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)

? HD Audio Jacks: Line in / Front Speaker / Microphone

Storage? 4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and

Hot Plug

Connector? 1 x Print Port Header

? 1 x COM Port Header

? 1 x Chassis Intrusion Header

? 1 x TPM Header

? 1 x CPU Fan Connector (4-pin)

? 1 x Chassis Fan Connector (4-pin)

? 1 x Power Fan Connector (3-pin)

? 1 x 24 pin ATX Power Connector

? 1 x 4 pin 12V Power Connector

? 1 x Front Panel Audio Connector

English

? 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD

Protection (ASRock Full Spike Protection))

? 1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports ESD

Protection (ASRock Full Spike Protection))

BIOS

Feature

? 32Mb AMI UEFI Legal BIOS with multilingual GUI support

? ACPI 1.1 Compliant wake up events

? SMBIOS 2.3.1 support

? CPU, DRAM, PCH 1.05V, PCH 1.5V Voltage multi-adjust-

ment

Hardware

Monitor

? CPU/Chassis temperature sensing

? CPU/Chassis/Power Fan Tachometer

? CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by

CPU temperature)

? CPU/Chassis Fan multi-speed control

? CASE OPEN detection

? Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore

OS? Microsoft? Windows? 8.1 32-bit / 8.1 64-bit / 8 32-bit / 8 64-

bit / 7 32-bit / 7 64-bit

Certifica-

tions

? FCC, CE, WHQL

? ErP/EuP ready (ErP/EuP ready power supply is required)

Please realize that there is a certain risk involved with overclocking, including adjust-

ing the setting in the BIOS, applying Untied Overclocking Technology, or using third-

party overclocking tools. Overclocking may affect your system’s stability, or even cause

damage to the components and devices of your system. It should be done at your own

risk and expense. We are not responsible for possible damage caused by overclocking.

* For detailed product information, please visit our website:https://www.wendangku.net/doc/0f229031.html,

Due to limitation, the actual memory size may be less than 4GB for the reservation

for system usage under Windows? 32-bit operating systems. Windows? 64-bit operat-

ing systems do not have such limitations. You can use ASRock XFast RAM to utilize

the memory that Windows? cannot use.

B95M-DGS

5E n g l i s h

1.3 Motherboard Layout

English

No.Description

1CPU Fan Connector (CPU_FAN1)

2ATX 12V Power Connector (ATX12V1)

3Power Fan Connector (PWR_FAN1)

4 2 x 240-pin DDR3 DIMM Slots (DDR3_A1, DDR3_B1)

5ATX Power Connector (ATXPWR1)

6SATA3 Connector (SATA3_3)

7SATA3 Connector (SATA3_2)

8SATA3 Connector (SATA3_0)

9SATA3 Connector (SATA3_1)

10USB 3.0 Header (USB3_2_3)

11Clear CMOS Jumper (CLRCMOS1)

12System Panel Header (PANEL1)

13TPM Header (TPMS1)

14USB 2.0 Header (USB6_7)

15Chassis Speaker Header (SPEAKER1)

16USB 2.0 Header (USB4_5)

17Chassis Fan Connector (CHA_FAN1)

18Print Port Header (LPT1)

19COM Port Header (COM1)

20Chassis Intrusion Header (CI1)

21Front Panel Audio Header (HD_AUDIO1)

B95M-DGS

E n g l i s h

1.4 I/O Panel

No.Description No.Description 1USB 2.0 Ports (USB01)6USB 2.0 Ports (USB23)2LAN RJ-45 Port*7USB 3.0 Ports (USB3_01)3Line In (Light Blue)8D-Sub Port 4Front Speaker (Lime)9DVI-D Port

Microphone (Pink)

PS/2 Mouse/Keyboard Port

983101

English

This is a Micro ATX form factor motherboard. Before you install the motherboard,

study the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

? Make sure to unplug the power cord before installing or removing the motherboard

components. Failure to do so may cause physical injuries and damages to motherboard

components.

? In order to avoid damage from static electricity to the motherboard’s components,

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

? Hold components by the edges and do not touch the ICs.

? Whenever you uninstall any components, place them on a grounded anti-static pad or

in the bag that comes with the components.

? When placing screws to secure the motherboard to the chassis, please do not over-

tighten the screws! Doing so may damage the motherboard.

Chapter 2 Installation

B95M-DGS

E n g l i s h

2.1 Installing the CPU

1. Before you insert the 1150-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.

2. Unplug all power cables before installing the CPU.

English

B95M-DGS

11E n g l i s h

Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.

English

2.2 Installing the CPU Fan and Heatsink

B95M-DGS

E n g l i s h

2.3 Installing Memory Modules (DIMM)

This motherboard provides two 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual Channel Memory Technology.

The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR3 DIMM pairs.

2. It is unable to activate Dual Channel Memory Technology with only one memory module installed.

3. It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot; otherwise, this motherboard and DIMM may be damaged.

English

B95M-DGS

E n g l i s h

2.4 Expansion Slots (PCI Express Slots)

There are 2 PCI Express slots on the motherboard.

PCIe slots:

PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards. PCIE2 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width graphics cards.

Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

English

2.5 Jumpers Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on

the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper

is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”

when a jumper cap is placed on these 2 pins.

Clear CMOS Jumper

(CLRCMOS1)

(see p.5, No. 11)

CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system

parameters to default setup, please turn off the computer and unplug the power

cord from the power supply. After waiting for 15 seconds, use a jumper cap to

short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear

the CMOS right after you update the BIOS. If you need to clear the CMOS when

you just finish updating the BIOS, you must boot up the system first, and then shut

it down before you do the clear-CMOS action. Please be noted that the password,

date, time, and user default profile will be cleared only if the CMOS battery is

removed.

Clear CMOS

Default

If you clear the CMOS, the case open may be detected. Please adjust the BIOS option

“Clear Status” to clear the record of previous chassis intrusion status.