Intensi-fi?
DRAFT-802.11n PRODUCT FAMILY
Intensi-fi Reference Designs
?First IEEE 802.11n draft-compliant Wi-Fi ?
solution
?BCM4321—MAC/baseband controller for draft-802.11n and
802.11a/b/g devices (PCI/PCI Express ?
/CardBus)
?BCM2055—2x2 dual-band single-chip radio—3x3 and 4x4antenna options for increased range and performance
?All CMOS implementation of the world's most advanced system architecture for draft-802.11n networks
?Fully backward-compatible with IEEE 802.11a/b/g legacy devices
?Allows cost-effective system design using low-cost PCB and single-sided assembly
?
High-performance features across the Intensi-fi? product line ?High-performance whole house wireless coverage ?OneDriver?
?SecureEasySetup??SmartRadio? ?WPA?/WPA2?
?Cisco ? Compatible Extensions (CCX4)
?Full-rate Advanced Encryption Standard (AES)engine in hardware
?WMM? for quality of service
?Reference Designs
?BCM94321CB2—CardBus reference design ?BCM94321MP—Mini PCI reference design
?BCM94321MC—PCI Express Mini Card reference design ?BCM94704NR—AP/Router reference design
?BCM94705NR—GbE AP/Router reference design
?Two spatially multiplexed streams support data rates up to 270 Mbps.?Increased rate/range performance enhances user satisfaction while reducing product support calls.
?Self-calibrating architecture allows high-yield board manufacturing.
?2x2 antenna structure maintains form factor compatibility with high-volume IEEE 802.11a/g industrial designs.
?Low-cost CMOS implementation for MAC, baseband, and radio allows integration with Broadcom's cable/DSL/set-top/VoIP chipsets.
?OneDriver: Single driver across platforms simplifies driver update process and improves customer satisfaction.?Designs meet Pb-free/RoHS worldwide requirements.
?
SecureEasySetup for simple Wi-Fi setup and security configuration.
?Wireless client cards for desktop and notebook PCs (PCI, PCI
Express, Mini Card, Mini PCI, and CardBus form factors)
?High-performance draft-802.11n router solutions with the BCM4704 SoC and BCM4705 SoC
?Home multimedia entertainment wireless networks ?Consumer Wi-Fi devices and other embedded applications
requiring high-performance throughput and range
F E A T U R E S
S Y S T E M /C H I P B E N E F I T S
A P P L I C A T I O N S
O V E R V I E W
Phone: 949-450-8700Fax: 949-926-5203
E-mail:info@https://www.wendangku.net/doc/0f1427832.html, Web:https://www.wendangku.net/doc/0f1427832.html,
BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013Irvine, California 92619-7013
? 2007 by BROADCOM CORPORATION. All rights reserved.Intensi-fi-PB01-R
03/12/07
BCM4321 and BCM2055 AP/Router Block Diagram
Intensi-fi Specifications
Interface/System bus support PCI/CardBus/PCI Express
Standard IEEE 802.11g, 802.11b, 802.11a, Intensi-fi draft-802.11n Data rate (Mbps)
54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, 1
20 MHz BW: 130, 117, 104, 78, 52, 39, 26, 1340 MHz BW: 270, 243, 216, 162, 108, 81, 54, 27Modulation
PSK/CCK, DQPSK, DBPSK, OFDM Network architectures Infrastructure and ad hoc
Operating frequencies 2.4 GHz—2.5GHz, 4.9GHz—5.85GHz
Operating channels 2.4 GHz: 11 for North America, 13 for Europe, and 14 for Japan 5 GHz: 12 for North America, 19 for Europe, and 4 for Japan RF output power 2x2: 2.4GHz 16dBm ±1.5dB, 5 GHz 14.5dBm ±1.5 dB
Antenna connectors Two or more antennas for simultaneous transmission and reception Power requirements 1.8V (3.3V for reference designs)Power consumption Average standby <130mW
264 – 300 MHz MIPS32 Core with MMU
PCI 2.3 Host
Magnetics 10/100 WAN RJ-45
Quad Magnetics 10/100 LAN RJ-45
Flash Memory
DDR/SDR SDRAM
BCM4704BCM4321
x1
CardBus/Mini PCI/PCI Express
2.5V Reg
1.8V Reg
SPROM I/F 4 Kb OTP
Security
I n t e r n a l B u s
JTAG
PCI Express
PCI V2.3
Intensi-fi
Draft – 802.11n PHY/AFE
BCM2055 RF Radio
Intensi-fi Draft – 802.11n
MAC
USB 1.1 Host
LED GPIO
USB 1.1 Host or Device
Modem/ Audio/ GPIO
UART
10/100 MAC 10/100 MAC
EBI Host
SDRAM I/F
AP/Router
BCM5325E/F