变压器常用术语_英语

最全的电气& 机械专用名词中英对译

变压器常用术语

TECHNICAL TERMS COMMONLY USED FOR TRANSFORMER

PART 1产品名称及类型

1.1电力变压器Power transformer

1.2芯式变压器core type transformer

内铁式变压器core-form transformer 1.3壳式变压器shell-form transformer

外铁式变压器shell-form transformer 1.4 密封式变压器sealed transformer

1.5 有载调压电力变压器power transformer with OLTC

1.6 无载调压电力变压器power transformer with off-circuit tap-changer

1.7 配电变压器distribution transformer

1.8 自耦变压器auto-transformer

1.9 联络变压器interconnecting transformer 1.10升压变压器step-up transformer

1.11降压变压器step-down transformer

1.12 增压变压器booster transformer

串联变压器

1.13 发电机变压器generator transformer 1.14 变电所变压器substation transformer 1.15 交流变压器converter transformer 1.16 分裂变压器split-winding type transformer

1.17 厂用变压器power plant transformer 1.18 变电站电力变压器electric substation transformer

1.19 单相变压器single-phase transformer 1.20 三相变压器three-phase transformer 1.21 多相变压器polyphase transformer 1.22 单相变压器组成的三相组three-phase banks with separate single-phase transformer 1.23 三相接地变压器three-phase earthing transformer

1.24 三线圈变压器three-winding transformer

1.25 两线圈变压器two-winding transformer

1.26 双线圈变压器double-winding transformer 1.27 多线圈变压器multi-winding transformer

1.28 油浸式变压器oil-immersed type transformer

1.29 浸难燃油变压器noninflammable medium impregnated transformer

1.30 干式变压器dry type transformer

1.31 树脂浇注式变压器resin-casting type transformer

1.32 H级绝缘变压器transformer with H class insulation

1.33 气体绝缘变压器gas insulated transformer

1.34 电炉变压器furnace transformer

1.35 整流变压器rectifier transformer

1.36 列车牵引变压器traction transformer, locomotive transformer

1.37 矿用变压器mining transformer

1.38 防爆变压器explosion-proof transformer flame-proof transformer

1.39 隔离变压器isolation transformer

1.40 试验变压器testing transformer

1.41 串级式试验变压器cascade testing transformer

1.42 串联变压器series transformer

1.43 增压变压器booster transformer

1.44 灯丝变压器filament transformer

1.45 电焊变压器welding transformer

1.46 钎焊变压器brazing transformer

1.47 船用变压器marine transformer

1.48 起动自耦变压器starting autotransformer

1.49 起动变压器starting transformer

1.50 移动变压器movable substation

1.51 移动式movable type

1.52 成套变电站complete substation

1.53 全自动保护单相变压器complete self-protected single-phase transformer(CSP) 1.54 互感器instrument transformer

1.55 测量用互感器measurement current/voltage TR

1.56 保护用互感器protective current/voltage transformer

1.57 电流互感器current transformer（CT）1.58 电压互感器voltage transformer

potential transformer(PT)

1.59 全绝缘电流互感器fully insulated current transformer

1.60 母线式电流互感器bus-type current transformer

1.61 绕线式电流互感器wound primary type current transformer

1.62 瓷箱式电流互感器porcelain type current transformer

1.63 套管用电流互感器bushing-type current transformer

1.64 电容式电流互感器capacitor type current transformer

1.65 支持式电流互感器support-type current transformer

1.66 倒立式电流互感器reverse type current transformer

1.67 塑料浇注式电流互感器cast resin current transformer

1.68 钳式电流互感器split-core type current transformer

1.69 速饱和电流互感器rapid-saturable current transformer

1.70 串级式电流互感器cascade-type current transformer

1.71 剩余电流互感器residual current transformer

1.72 电容式电压互感器capacitor type voltage transformer

1.73 接地电压互感器earthed voltage transformer

1.74 不接地电压互感器unearthed voltage transformer

1.75 组合式互感器combined instrument transformer

1.76 剩余电压互感器residual voltage transformer

1.77 移圈调压器moving-coil voltage transformer

1.78 动线圈moving winding

1.79 自耦调压器autoformer regulator

1.80 接触调压器variac

1.81 感应调压器induction voltage regulator 1.82 磁饱和调压器magnetic saturation voltage regulator 1.83 电抗器reactor

1.84 并联电抗器shunt reactor

1.85 串联电抗器series reactor

1.86 饱和电抗器saturable reactor

1.87 铁心电抗器iron core reactor

1.88 空心电抗器air core reactor

1.89 水泥电抗器concrete(cement) reactor 1.90 三相中性点接地电抗器three-phase neutral reactor

1.92 单相中性点接地电抗器single-phase neutral earthing reactor

1.93 起动电抗器starting reactor

1.94 平衡电抗器smoothing /interphase reactor

1.95 调幅电抗器modulation reactor

1.96 消弧电抗器arc-suppression reactor 1.97 消弧线圈arc-suppression coil

1.98 阻波器，阻波线圈wave trap coil

1.99 镇流器ballast

1.100 密闭式sealed type

1.101 包封式enclosed type

1.102 户外式outdoor type

1.103 户内式indoor type

1.104 柱上式pole mounting type

1.105 移动式movable type

1.106 列车式trailer mounted type

1.107 自冷natural cooling (ONAN)

1.108 风冷forced-air cooling (ONAF)

1.109 强油风冷forced-oil forced-air cooling(ONAF)

1.110 强油水冷forced-oil forced-water cooling (ONWF)

1.111 强油导向冷却forced-directed oil cooling (OFAN)

1.112 强油导向风冷却forced-directed forced-air oil cooling(ODAF)

1.113 恒磁通调压constant flux voltage variation(CFVV)

1.114 变磁通调压variable flux voltage variation(VFVV)

1.115 混合调压combined voltage variation(CbVV)

PART2 基础词汇

2.1 千瓦kilowatt(kw)

2.2 兆瓦megawatt(MW)

2.3 京瓦gigawatt(GW)

2.4 千伏kilovolt(kV)

2.5 兆伏megavolt(MV)

2.6 京电子伏giga-electron-volt(GEV)

2.7 千伏安KVA

2.8 兆伏安MV A

2.9 京伏安GV A

2.10 千乏kilovar(kV Ar)

2.11 兆乏megavar(MV Ar)

2.12 京乏gigavar(GV Ar)

2.13 产品代号symbol of product

2.14 产品型号type of product

2.15 额定电压rated voltage

2.16 额定容量rated power

2.17 额定电流rated current

2.18 连接组标号connection symbol, symbol of connection

2.19 阻抗电压impedance voltage

2.20 额定频率rated frequency

2.21 空载损耗no-load loss

2.22 涡流损耗eddy-current loss

2.23 磁滞损耗hysteresis loss

2.24 空载电流no-load current

2.25 激磁电流exciting current

2.26 负载损耗load loss

2.27 附加损耗additional losses, supplementary load loss

2.28 杂散损耗stray losses

2.29 总损耗total losses

2.30 损耗比loss ratio

2.31 冷却方式type of cooling

2.32 介质损耗dielectric loss

2.33 介损角正切值loss tangent

2.34 电压组合voltage combination

2.35 电抗电压reactance voltage

2.36 额定电压比rated voltage ratio

2.37 电阻电压resistance voltage

2.38 电压调整率voltage regulation

2.39 相位差phase displacement

2.40 相位差校验phase displacement verification

2.41 零序阻抗zero-sequence impedance 2.42 短路阻抗short-circuit impedance

2.43 磁通密度flux density

2.44 电流密度current density 2.45 安匝数number of ampere-turns

2.46 轴向漏磁通axial leakage flux

2.47 径向漏磁通radial leakage flux

2.48 循环电流circulating current

2.49 热点hot spot

2.50 最热点hottest spot

2.51 局部过热local overheat

2.52 有功输出active output

2.53 满容量分接fully-power tapping

2.54 额定级电压rated step voltage

2.55 最大额定电压maximum rated voltage 2.56 最大额定电流maximum rated through-current

2.57 绕组额定电压rated voltage of a winding

2.58 额定短时电流rated short time current 2.59 额定短时热电流rated short thermal current

2.60 额定连续热电流rated continuous current

2.61 额定动稳定电流rated dynamic current 2.62 一次电流/电压primary current/voltage 2.63 二次电流/电压secondary current/voltage

2.64 实际电流比actual transformation ratio of a current transformer

2.65 实际电压比actual transformation ratio of a voltage transformer

2.66 二次极限感应电动势secondary limiting e.m.f.

2.67 互感器的二次回顾路secondary circuit of CT and PT

2.68 定额rating

2.69 铁心噪声noise of core

2.70 背境噪声background noise

2.71 噪声水平noise level

2.72 声级sound level

2.73 声功率级sound power level

2.74 声级试验sound level test

2.75 声级测量sound level measurement 2.76水平加速度horizontal acceleration

2.77 垂直加速度vertical acceleration

2.78 地震seism, earthquake

2.79 地震烈度earthquake intensity

2.80 工频power-frequency

2.81 中频medium frequency

2.82 高频high frequency

2.83 振荡频率oscillating frequency

2.84 谐振频率resonance frequency

2.85 自振频率natural frequency of vibration 2.86 频率响应frequency response

2.87 谐波测量harmonics measurement

2.88 绝缘水平insulation level

2.89 绝缘强度insulation strength, dielectric strength

2.90 主绝缘main insulation

2.91 纵绝缘longitudinal insulation

2.92 内绝缘internal insulation

2.93 外绝缘external insulation

2.94 绝缘配合insulation co-ordination

2.95 全绝缘uniform insulation

2.96 半绝缘non-uniform insulation

2.97 降纸绝缘reduced insulation

2.98 中心点neutral point

2.99 中心点端子neutral terminal

2.100 正常绝缘normal insulation

2.101 介电常数dielectric constant

2.102 油纸绝缘系统oil-paper insulation system Chopped

2.103 绝缘电阻insulation resistance

2.104 绝缘电阻吸收比absorption ratio of insulation resistance

2.105 绝缘击穿insulation breakdown

2.106 碳化carbonization

2.107 爬电距离creepage distance

2.108 沿面放电creeping discharge

2.109 放电discharge

2.110 局部放电partial discharge

2.111 局部放电测量measurement of partial discharge

2.112 超声定位ultrasonic location, ultrasonic orientation

2.113 破坏性放电disruptive discharge

2.114 局部放电起始电压partial discharge inception voltage

2.115 局部放电终止电压partial discharge extinction voltage

2.116 过电压overvoltage

2.117 短时过电压short time overvoltage 2.118 瞬时过电压transient overvoltage

2.119 操作过电压switching overvoltage 2.120 大气过电压atmospheric overvoltage 2.121 额定耐受电压rated withstand voltage 2.122 工频耐受电压power-frequency withstand voltage

2.123 感应耐压试验induced overvoltage withstand test

2.124 温升试验temperature-rise test

2.125 温升temperature rise

2.126 突发短路试验short-circuit test

2.127 动热稳定thermo-dynamic stability 2.128 冲击耐压试验impulse voltage withstand test

2.129 雷电冲击耐受电压lightning impulse withstand voltage

2.130 操作冲击耐受电压switching impulse withstand voltage

2.131 雷电冲击lightning impulse

2.132 全波雷电冲击full wave lightning impulse

2.133 截波雷电冲击chopped wave lightning impulse

2.134 操作冲击switching impulse

2.135 操作冲击波switch surge, switch impulse

2.136 伏秒特性voltage-time characteristics 2.137 截断时间time to chopping

2.138 波前时间time to crest

2.139 视在波前时间virtual front time

2.140 半峰值时间time to half value crest 2.141 峰值peak value, crest value

2.142 有效值root-mean-square value

2.143 标么值per unit value

2.144 标称值nominal value

2.145 电级electrode

2.146 电位梯度potential gradient

2.147 等电位，等位equipotential

2.148 屏蔽shielding

2.149 静电屏蔽electrostatic shielding

2.150 磁屏蔽magnetic shielding

2.151 静电屏electrostatic screen

2.152 静电板electrostatic plate

2.153 静电环electrostatic ring

2.154 电磁感应electro-magnetic induction

2.155 电磁单元electro-magnetic unit

2.156 有效面effective surface

2.157 标准大气条件standard atmospheric condition

2.158 视在电荷apparent charge

2.159 体积电阻volume resistance

2.160 导电率admittance

2.161 电导conductance, conductivity

2.162 电晕放电corona discharge

2.163 闪络flashover

2.164 避雷器surge arrestor

2.165 避雷器的残压residual voltage of an arrestor

2.166 绝缘材料耐温等级temperature class of insulation

2.167 互感器额定负荷rated burden of an instrument transformer

2.168 准确级次accuracy class

2.169 真值true value

2.170 允差tolerance

2.171 比值误差校验ratio error verification 2.172 电流误差current error

2.173 电压误差voltage error

2.174 互感器相角差phase displacement of instrument transformer

2.175 复合误差composite error

2.176 瞬时特性transient characteristic

2.177 瞬时误差transient error

2.178 额定仪表保安电流rated instrument security current

2.179 二次极限感应电势secondary limiting

e.m.f

2.180 保安因子security factor

2.181 额定准确限值的一次电流rated accuracy limit primary current

2.182 误差补偿error compensation

2.183 额定电压因子rated voltage factor 2.184 准确限值因子accuracy limit factor 2.185 开断电流switched current

2.186 笛卡尔坐标，直角坐标Cartesian coordinate

2.187 极坐标polar coordinate

2.188 横坐标abscissa

2.189 纵坐标ordinate

2.190 X-轴X-axis 2.191 复数complex number

2.192 实数部分real component

2.193 虚数部分imaginary component

2.194 正数positive number

2.195 负数negative number

2.196 小数decimal

2.197 四舍五入round off

2.198 分数fraction

2.199 分子numerator

2.200 分母denominator

2.201 假分数improper fraction

2.202 钝角obtuse angle

2.203 锐角acute angle

2.204 补角supplementary angle

2.205 余角complement angle

2.206 平行parallel

2.207 垂直perpendicular

2.208 乘方involution

2.209 开方evolution, extraction of root

2.210 n的5次方5th power of n

2.211 幂exponent, exponential

2.212 微分，差动differential, differentiate 2.213 积分，集成integral, integrate

2.214 成正比proportional to….

2.215 成反比inversely proportional to…2.216 概率probability

2.217 归纳法inductive method

2.218 外推法extrapolation method

2.219 插入法interpolation method

2.220 最大似然法maximum likelihood method

2.221 图解法graphic method

2.222 有限元法finite element method

2.223 模拟法simulation method

2.224 方波回应step response

2.225 迭加电荷superimposed charge

2.226 杂散电容stray capacitance

2.227 无损探伤non-distractive flaw detection

2.228 红外线扫描infrared scanning

2.229 计算机辅助设计computer aided design(CAD)

2.230 计算机辅助制造computer aided manufacturing(CAM)

2.231 计算机辅助试验computer aided

test(CAT)

2.232 最大maximum 最小minimum

2.233 近似于approximate（approx）

2.234 每分钟转数revolution per minute(rpm)

2.235 速度speed, velocity

2.236 加速度acceleration

2.237 重力加速度gravitational acceleration 2.238 引力traction

2.239 数量quality

2.240 件数pieces

2.241 部门department(dept)

2.242 缩写abbreviation

2.243 以下简称为hereinafter referred as xxx

2.244 常用单位units commonly used

2.245 包括缩写including abbreviations

2.246 米meter 分米decimeter 厘米centimeter 毫米millimeter

2.247 公里kilometer 英里mile 海里knot 2.248 码yard 英寸inch

2.249 磅pound(1b) 磅/平方英寸pound per square inch(ppsi)

2.250 英尺foot

2.251 英制热量单位British thermal unit (BTU)

2.252 马力horsepower

2.253 压强intensity of pressure

2.254 帕斯卡Pascal(Pa)

2.255 千帕kpa 兆帕Mpa

2.256 粘度viscosity

2.257 帕斯卡秒pascal.second

2.258 泊poise 厘泊centipoises

2.259 焦耳joule(J) 千瓦时kilowatt-hour(kwh)

2.260 特斯拉tesla(T) 高斯gaue(Gs)

2.261 奥斯特oersted(0e) 库仑coulomb(C) 2.262 微微库Pico-coulomb(PC)

2.263 牛顿Newton(N) 达因dyne

2.264 摄氏度Celsius, centigrade(℃)

2.265 开尔文Kelvin 法拉farad(F)

2.266 皮可法拉pico-farad(pF)

2.267 升literl(L) 加仑gallon

2.268 立方分米cubic decimeter

立方厘米cubic centimeter 2.269 桶barrel 石油petroleum

2.270 标准国际单位制standard international unit

2.271 厘米-克秒单位制CGS unit

2.272 环境设备ambience apparatus

2.273 校验calibration

2.274 兼容性compatibility

2.275 扩散系数diffusion coefficient

2.276 故障fault

2.277 公顷hectare

PART3 典型产品结构

3.1 芯式，内铁式core type

3.2 壳式，外铁式shell type

3.3 铁心core

3.4 磁路magnetic circuit

3.5 线圈winding, coil

3.6 高压线圈HV winding

3.7 中压线圈MV winding

3.8 低压线圈LV winding

3.9 调压线圈tapped winding, regulating winding

3.10 高压引线high-voltage leads

3.11 中压引线mid-voltage leads

3.12 低压引线low-voltage leads

3.13 夹件clamping frame

3.14 上部夹件upper clamping

3.15 下部夹件lower clamping

3.16 线圈压紧螺栓winding compressing bolt

3.17 线圈压紧装置winding compressing device

3.18 线圈端部绝缘end insulation of winding

3.19 器身定位装置positioning device for active-part

3.20 定位装置fixing device

3.21 铁心垫脚foot-plate of core

3.22 垫脚foot-pad

3.23 分接引线tapping leads, tap leads

3.24 引线支架supporting frame for leads 3.25 无励磁分接开关non-excitation tap-changer

3.26 无载分接开关off-circuit tap-changer 3.27 分接选择器tap selector

3.28 有载分接开关on-load

tap-changer(OLTC) on-circuit tap-changer 3.29 切换开关diverter switch

3.30 选择开关selector switch

3.31 转换选择器change-over selector

3.32 粗选择器coarse tap selector

3.33 触头组set of contacts

3.34 过度触头transition contacts

3.35 过度阻抗transition impedance

3.36 有载开关操纵机构operating mechanism of OLTC

3.37 驱动机构driving mechanism

3.38 电动机构motor drive

3.39 垂直转动轴vertical driving shaft

水平转动轴horizontal driving shaft 3.40 伞尺轮盒bevel gear box

3.41 防雨罩drip-proof cap

3.42 联轴节coupling

3.43 最大分接maximum tapping

最小分接minimum tapping

3.44 额定分接rated tapping, principal tapping

3.45 固定分接位置数number of inherent tapping positions

工作分接位置数number of service tapping positions

3.46 主分接principal tap, main tap

正分接plus tapping

负分接minus tapping

3.47 分接变换操作tap-changer operation 3.48 分接位置指示器tap position indicator 3.49 线圈分接电压tapping voltage of a winding

3.50 线圈分接电流tapping current of a winding

3.51 线圈分接容量tapping power of a winding

3.52 分接范围tapping range

3.53 分接量tapping quantities

3.54 分接因子tapping factor

3.55 分接工作能力tapping duty

3.56 分接线tapping step

3.57 分接线tapping connection

3.58 分接引线tapping lead

3.59 小车支架及滚轮bogie frame and wheel 3.60 油箱tank

3.61 箱底tank bottom

3.62 箱盖tank cover

3.63 箱沿tank rim

3.64 垫脚垫块supporting block for foot-pad 3.65 联管接头tube connector

3.66 联接法兰connecting flange

3.67 加强筋，加强板stiffener

3.68 油箱垂直加强铁vertical stiffening channel of tank wall

3.69 油箱活门oil sampling valve

3.70 放油活门oil drainningvalve

3.71 冷却器cooler

3.72 集中安装concentrated installation

3.73 集中安装强油循环风冷器concentrated installation of forced-oil circulating air cooler

3.74 冷却器进口inlet of cooler

冷却器出口outlet of cooler

3.75 潜油泵oil-submerged pump

3.76 油流继电器oil flow relay

3.77 净油器oil filter

3.78 虹吸净油器oil siphon filter

3.79 散热器radiator

3.80 片式散热器panel type radiator

3.81 管式散热器tubular radiator

3.82 放油塞oil draining plug

3.83 放气塞air exhausting plug

3.84 蝶阀radiator valve butterfly valve 3.85 风扇支架supporting frame for fan motors

3.86 风扇及电机fan and motor

3.87 风扇接线盒connecting box for fan motors

3.88 储油柜conservator

3.89 油位计oil-level indicator

3.90 气体继电器gas relay, buchholz realy 3.91 皮托继电器pitot relay

3.92 储油柜联管elbow joint for conservator 3.93 有载开关用储油柜conservator for OLTC

3.94 有载开关用气体继电器gas relay for OLTC

3.95 联管tube connector

3.96 吸湿器dehydrating breather

3.97 铭牌rating plate

3.98 温度计thermometer

3.98 指示仪表柜cabinet panel for indicating instruments

3.99 风扇控制柜cabinet panel for fan motor control

3.100 压力释放阀pressure-relief valve

3.101 安全气道explosion-proof pope

3.102 膨胀器expander

3.103 主排气导管main gas-conduit

3.104 分支导气管branching gas-conduit 3.105 滤油界面tube connector for oil-filter 3.106 温度计座thermometer socket

3.107 储油柜支架supporting frame for conservator

3.108 高压套管HV bushing

3.109 高压套管均压球equipotential shielding for HV bushing

3.110 高压零相套管HV neutral bushing, HV bushing phase0

3.111 中压套管MV bushing

3.112 中压零相套管MV neutral bushing, MV bushing phase0

3.113 低压套管LV bushing

3.114 接地套管earthing bushing

3.115 极性polarity

3.116 极化polarization

3.117 高压套管储油柜conservator for HV bushing

3.118 相间隔板interphase insulating barrier 3.119 吊攀lifting lug

3.120 安装轨道installation rail

3.121 相序标志牌designation mark of phase sequence

3.122 接地螺栓earthing bolt

3.123 视察窗inspection hole

3.124 手孔handhole

3.125 人孔manhole

3.126 MR有载开关MR OLTC

3.127 ABB 有载开关ABB OLTC

3.128 伊林有载开关ELIN OLTC

3.129 F&套管F&G bushing

PART4 铁心结构

4.1 多框式铁心multi-frame type core

4.2 三相三柱铁心three-phase three-limb core

4.3 三相五柱铁心three-phase five-limb core

4.4 卷铁心wound core

4.5 冷轧晶粒取向硅钢片cold-rolled grain-oriented silicon sheet steel

4.6 晶粒crystalline grain

4.7 高导磁硅钢片HI-B silicon sheet steel 4.8 铁心片core lamination

4.9 一迭铁心a lamination stock

4.10 铁心迭积图lamination drawing, lamination diagram

4.11 迭片lamination

4.12 迭片系数lamination factor

4.13 空间利用系数space factor

4.14 层间绝缘layer insulation

4.15 斜接缝mitring

4.16 45°斜接缝45°mitred joint

4.17 斜接缝的交错排列方式over-lay arrangement for mitred joints of lamination 4.18 重迭overlap

4.19 铁心油通oil-duct of core

4.20 铁心气道air ventilating duct of core 4.21 阶梯接缝stepped lay joint

4.22 对接铁心butt jointed core

4.23 渐开线铁心evolute core, involute core 4.24 空气隙air gap

4.25 铁心拉板tensile plate of core limb, core drawplate

4.26 铁心柱core limb, core lge

4.27 轭，铁轭yoke

4.28 上轭upper yoke

下轭lower yoke

旁轭side yoke, return yoke

4.29 环氧绑扎带epoxy-bonded bandage 4.30 轭拉带yoke tensile belt

4.31 铁轭拉带banded band of core yoke 4.32 上轭顶梁top jointing beam of upper yoke

4.33 侧梁side beam

4.34 夹件clamping frame

4.35 铁心夹件core clamps, coreframe

4.36 铁轭夹件yoke clamping, yoke clamps 4.37 上夹件upper yoke clamping, upper yoke clamps

4.38 下夹件lower yoke clampings, lower yoke clamps

4.39 夹件腹板web of yoke clamping

4.40 夹件肢板limb of yoke clamping

4.41 夹件加强stiffening plate of clamping 4.42 压线圈的压钉winding compressing bolt

4.43 压钉螺母nut for compressing bolt

4.44 弹簧压钉compressing bolt with spring 4.45 油缸压钉compressing bolt with hydraulic damper

4.46 线圈支撑架winding supporter

4.47 线圈支撑架winding supporting plate 4.48 垫脚foot pad

4.49 定位孔positioning hole

4.50 带螺母的定位柱positioning stud

4.51 拉螺杆tensile rod

4.52 夹件夹紧螺杆yoke clamping bolt

4.53 铁心接地片core earthing strip

4.54 铁心地屏earthing screen of code

4.55 旁轭地屏earthing screen of side yoke 4.56 接地屏蔽earthing shield

4.57 铁心窗高core window height

4.58 中心距M center line distance M

4.59 铁心中间距center distance between lombs

4.60 木垫块wood padding block

4.61 迭片系数lamination factor

4.62 铁心的级stage of lamination stacks 4.63 心柱外接圆circumscribed circle of core leg

4.64 铁心端面core surface perpendicular to lamination

4.65 木棒wood bar, wood rod

4.66 定位板positioning plate

PART5 线圈结构

5.1 圆筒式线圈cylindrical winding

5.2 层式线圈layer winding

5.3 饼式线圈disk winding

5.4 单层圆筒式线圈single layer cylindrical winding

5.5 双层圆筒式线圈double layer cylindrical winding

5.6 多层圆筒式线圈multi-layer cylindrical winding 5.7 大型层式线圈large size long layer winding

5.8 分段圆筒式线圈sectional layer winding 5.9 分段多层圆筒线圈sectional multi-layer winding

5.10 连续式线圈continuous winding

5.11 半连续式线圈semi-continuous winding

5.12 纠结式线圈interleaved winding

5.13 纠结饼式线圈interleaved disc winding 5.14 纠结—连续式线圈interleaved-continuous winding

5.15 部分纠结式线圈partial-interleaved winding

5.16 插花纠结式线圈sandwich-interleaved winding

5.17 内屏连续式线圈innershield-continuous winding

5.18 插入电容式线圈capacitor shield winding

5.19 高串联电容线圈high series capacitance winding

5.20 双饼式线圈twin-disk winding

5.21 交错式线圈sandwich winding, staggered winding

5.22 螺旋式线圈helical winding, helix winding

5.23 半螺旋式线圈semi-helical winding 5.24 单列螺旋式线圈single-row helical winding

5.25 双列螺旋式线圈double-row helical winding

5.26 三列螺旋式线圈three-row helical winding

5.27 短螺旋式线圈short helical winding 5.28 螺旋式线圈引出端的固定terminal fixing for helical winding

5.29 分裂式线圈split winding

5.30 分段式线圈sectional winding

5.31 箔式线圈foil winding

5.32 全绝缘线圈uniformly insulated winding

5.33 分级绝缘线圈gradedly insulated winding, winding with non-uniform insulation 5.34 第三线圈tertiary winding

5.35 高压线圈high-voltage winding

5.36 中压线圈mid-voltage winding, intermediate voltage winding

5.37 低压线圈low-voltage winding

5.38 调压线圈regulating winding, tapped winding

5.39 辅助线圈auxiliary winding

5.40 平衡线圈balance winding

5.41 稳定线圈stabilizing winding

5.42 公共线圈common winding

5.43 串联线圈series winding

5.44 连耦线圈coupling winding

5.45 励磁线圈exciting winding, energizing winding

5.46 一次线圈primary winding

5.47 二次线圈secondary winding

5.48 左绕left-wound

5.49 右绕right-wound

5.50 星形联结star connection

5.51 三角形联结delta connection

5.52 曲折形联结zigzag connection

5.53 T形联结scott connection

5.54 开口三角形联结open-delta connection 5.55 开口线圈open winding

5.57 线段winding disk, winding section

5.58 线层winding layer

5.59 匝绝缘turn insulation

5.60 层绝缘layer insulation

5.61 段绝缘insulation between disks, section insulation

5.62 端绝缘end insulation

5.63 顶部端环top support ring

5.64 分接头tapping terminal

5.65 分接区tapping zone

5.66 段间横垫块radial spacer between disks 5.67 燕尾垫块chock

5.68 燕尾撑条dovetail strip

5.69 垫块的厚度spacer thickness

5.70 垫块的宽度spacer width

5.71 撑条stick, duct strip

5.72 轴向撑条axial strip

5.73 油道oil-duct, oil passage

5.74 径向油道radial oil-duct

5.75 段间油道oil-duct between disks

5.76 段间过度联线transfer connection between disks

5.77 段间换位联线transposed connection between disks

5.78 S弯S-bend

5.79 线圈起始端initial terminal of winding 5.80 线圈终端final terminal of winding

5.81 轴向深度axial depth

5.82 径向深度radial depth

5.83 绝缘纸筒insulating cylinder

5.84 匝间绝缘turn insulation

5.85 绝缘角环insulating angled ring (collar ring)

5.86 线匝间垫条insulating filling strips between turns

5.87 分数匝fractional turn

5.88 整数匝integer turn

5.89 近似一圈approximate roll

5.90 并绕导线parallel wound conductors 5.91 多股导线multi-strand conductors

5.92 电磁线electro-magnetic conductor

5.93 组合导线composite conductor

5.94 换位导线transposed conductor, transposed cable

5.95 纸包线paper wrapped conductor

5.96 纸包导线covered conductor

5.97 漆包线enameled conductor

5.98 圆线round wire

5.99 硬拉铜导线hard drawn copper conductor

5.100 退火导线annealed conductor

5.101 玻璃丝包线glass-fiber covered conductor

5.102 纸槽paper channel

5.103 绑线binding wire

5.104 绑绳binding rope

5.105 静电板electrostatic plate

5.106 静电环electrostatic ring

5.107 端部电容环capacitive layer end ring 5.108 端部电容屏capacitive layer end screen

5.109 屏蔽环shielding ring

5.110 屏蔽线shielding conductor

5.111 屏蔽角环shroud petal

5.112 绝缘包扎insulation wrapping

5.113 线圈总高度overall height of winding

5.114 铜线高度copper height of winding 5.115 线圈调整trimming of winding

5.116 线圈浸漆varnish impregnation of winding

5.117 线圈的换位transposition of winding 5.118 标准换位standard transposition

5.119 分组换位transposition by groups

5.120 线圈展开图planiform drawing of winding

5.121 线圈的干燥与压缩drying and compressing of winding

5.122 绝缘的压缩收缩率shrinkage of insulation under compression

5.123 无氧铜导线deoxygenized copper conductor

5.124 铝合金导线aluminum-alloy conductor

PART6 油箱结构及附件

6.1 钟罩式油箱bell type tank

6.2 上节油箱upper part of tank

6.3 下节油箱bottom part of tank

6.4 箱壁tank wall

6.5 带磁屏箱壁tank wall with magnetic shield

6.6 箱底tank bottom

6.7 箱盖tank cover

6.8 箱沿tank rim

6.9 箱沿护框pad frame for tank rim gasket 6.10 边缘垫片rim

6.11 加强筋,加强板stiffener

6.12 联管头tube connecting flange

6.13 放油活门draining valve

6.14 油样活门oil sampling valve

6.15 油样活塞oil sampling plug

6.16 闸阀gate valve

6.17 蝶阀butterfly valve

6.18 球阀ball valve

6.19 压力释放阀pressure relief valve

6.20 安全气道explosion-proof pipe

6.21 真空接头connecting flange for evacuation

6.22 滤油接头connecting flange for oil filter

6.23 水银温度计pocket for mercury thermometer 6.24 铭牌底板base plate of rating plate

6.25 手孔handhole

6.26 人孔manhole

6.27 升高座ascending flanged base turret 6.28 吊攀lifting lug

6.29 千斤顶支座jacking lug

6.30 定位钉positioning pin

6.31 盖板cover plate

6.32 临时盖板temporary cover plate

6.33 带隔膜储油柜conservator with rubber diaphragm

6.34 带胶囊储油柜conservator with rubber bladder

6.35 沉淀盒precipitation well

6.36 导气管air exhausting pipe

6.37 导油管oil conduit

6.38 吊环lifting eyebolt

6.39 有围栏的梯子ladder with balustrade 6.40 适形油箱form-fit tank

6.41 呼吸器breather

6.42 气体继电器gas relay, buchholz relay 6.43 皮托继电器pitot relay

6.44 流动继电器flow relay

6.45 风冷却器air cooler

6.46 水冷却器water cooler

6.47 冷却器托架bracket for cooler

6.48 冷却器拉杆tensile rod for cooler

6.49 潜油泵oil-submerged pump

6.50 流量flow quantity

6.51 扬程lift

6.52 控制箱control box

6.53 控制盘control panel

6.54 端子箱terminal box

6.55 端子排terminal block

6.56 风扇接线盒connecting box for fan-motors

6.57 金属软管metallic hose

6.58 封闭母线联结法兰joint flange for enclosed bus-bar

6.59 管式油位指示器tubular oil-level indicator

6.60 磁铁式油位指示器magnetic type oil-level indicator

PART7 铁心制造

7.1 产品制造manufacturing of products

7.2 硅钢片纵剪silicon steel sheet slitting 7.3 硅钢片横剪silicon steel sheet cutting to length

7.4 多刀滚剪机multi-disk-cutter slitting machine

7.5 纵剪slitting

横剪cut-to-length

7.6 纵剪生产线slitting line

7.7 横剪生产线cut-to-length line

7.8 开卷机decoiler

7.9 毛刺burr

7.10 铁心片预迭pre-stacking of core lamination

7.11 铁心迭装core assembly

7.12 铁心迭片core lamination

7.13 选片pre-selection of lamination

7.14 迭片lamination stacking

7.15 两片一迭stacked by two-sheet

7.16 打（敲）齐knock to even

7.17 迭装流转台core assembly tilting platform

7.18 不迭上轭core stacking without upper yoke

7.19 打铁心用垫块knock block

7.20 铁心料盘lamination stocking tray

7.21 卷铁心机core winding machine

7.22 铁心退火core annealing

7.23 铁心中间试验interprocess core test 7.24 片的角度偏差angular misalignment of lamination

7.25 宽度偏差width deviation

7.26 长度偏差length deviation

7.27 铁心的垂直度verticality of core

7.28 铁心起立tilt the core into vertical position

7.29 迭片的定位挡板positioning stopper for core assembly

7.30 硅钢片的涂漆varnish coating of silicon steel sheet

7.31 片间绝缘试验lamination insulation test

7.32 半导体粘带semi-conductive adhesive tape

7.33 半干环氧粘带semi-cured epoxy adhesive tape 7.34 粘带的固化cure of adhesive tape

7.35 夹紧铁心工具clamping tools for core 7.36 铁心柱的夹紧装置tightening device for core leg

7.37 铁心翻转台tilting platform of core 7.38 螺旋千斤顶screw jack

7.39 水平尺level gauge, level instrument 7.40 专用套筒搬手special socket spanner 7.41 迭片的工艺孔punching hole on the lamination for manufacturing purpose

7.42 迭板导棒guiding bar for core assembly 7.43 力短搬手torque spanner, torque wrench

7.44 角度测量平台angular measuring platform

7.45 切口防锈漆antirust coating for cutting edges

7.46 铁心的油道撑条strips for core oil-ducts

7.47 撑条粘结sticking of strips

7.48 级间衬纸insulating paper between core stages

7.48 冲孔模hole punching die

7.49 缺口模notch punching die

7.50 皮裙leather apron

7.51 防护袖protective sleeve

7.52 护臂shoulder guard

7.53 护腿shin guard

PART8 线圈制造

8.1 绕线机，卷线机winding machine

8.2 卧式绕线机horizontal winding machine 8.3 立式绕线机vertical winding machine 8.4 绕盘架bracket for conductor drums, bracket for wire drums

8.5 导线盘conductor drum, wire drum

8.6 导线拉紧装置conductor tensile device, wire tensile device

8.7 导线复绕机conductor rewind machine 8.8 导线矫直机conductor straightening machine

8.9 可调节绕线模adjustable winding drum 8.10 装配式绕线模fabricated winding drum 8.11 钢板筒绕线模steel-plate rolled winding drum

8.12 模子直径former diameter

8.13 线圈外径OD (outside diameter) of winding

8.14 线圈内径ID (inside diameter) of winding

8.15 半径radius

8.16 木撑条wood supporting strips

8.17 绝缘撑条insulating strips

8.18 撑条号number of the strip, number of chock line

8.19 正段线饼normally wound disks

8.20 反段线饼reversely wound disks

8.21 临时段线饼temporarily wound disks 8.22 S型弯crossover

8.23 匝数器winding-turn recorder

8.24 线圈的导线winding conductor

8.25 线圈内部的导线焊接welding of conductors within the winding

8.26 碰焊butt welding

8.27 焊接导线用的碰焊机butt welder for conductor joint

8.28 铜焊brazing welding

8.29 铜电焊electric brazing

8.30 脚控点焊机foot-operated spot welder 8.31 附加绝缘additional insulation

8.32 出头固定winding terminal fixing

8.33 出头锁紧winding terminal fastening 8.34 打圈出头terminal end out by looping 8.35 拿弯工具bending tool

8.36 线圈夹具clamping tool for winding 8.37 线圈翻转架tilting frame for winding 8.38 扁嘴钳flat nosed pliers

8.39 克丝钳wire-cutting pliers

8.40 钳锤plummet

8.41 恒压干燥drying under constant compression

8.42 线圈压板winding compression plates 8.43 拉紧螺杆tensile screw rod

8.44 弹簧压梁spring compression

8.45 木垫块wood padding block

8.46 铝垫块aluminum padding block

8.47 线圈的稳定处理isostatic treatment of winding

8.48 股间绝缘试验insulation test between strands

8.49 导线包纸insulation wrapping of conductor

8.50 纸带盘paper tape reels

8.51 包纸机wrapping machine

8.52 立式包纸机vertical paper wrapping machine

8.53 卧式包纸机horizontal paper wrapping machine

8.54 恒湿箱humidistat

8.55 裁纸机paper slitting machine

8.56 螺旋柱形弹簧helical spring

8.57 碟形弹簧，盘形弹簧Belleville spring washer

8.58 皱纹纸带crepe paper tape

8.59 金属编织带metal wire woven tape

8.60 线圈干燥后的整理trimming of winding after drying

8.61 卧式真空干燥罐side-loading vacuum drying autoclave

8.62 立式真空干燥罐top-loading vacuum drying autoclave

8.63 线圈油压机hydraulic press for winding

8.64 多根撑条铣切机muli-strip milling cutter

8.65 线圈的传递及保管conveyance and storage of winding

PART 9 油箱制造

9.1 钢板表面预处理steel plate surface pre-processing

9.2 划线layout

9.3 园形样板circular template

9.4 剪切shearing

9.5 刨边edge shaping

9.6 气割gas cutting

9.7 自动气割automatic gas cutting

9.8 等离子切割plasma cutting

9.9 切割机cutting machine

9.10 多用切割机universal cutting machine 9.11 气焊把welding torch, welding blowpipe

9.12 割咀cutting nozzle

9.13 焊咀welding nozzle

9.14 焊条welding rod

9.15 焊剂welding paste, welding flux

9.16 焊接桌welding bench

9.17 焊接用保护镜welding goggles

9.18 瓶推车cylinder trpolley

9.19 折板机bending press, bending braks 9.20 液压折板机hydraulic bending press, hydraulic bending brake

9.21 交流电弧焊alternation arc welding 9.22 自动电焊automatic electric arc welding

9.23 埋弧自动焊automatic submerged-arc welding

9.24 CO保护焊CO protected welding

9.25 氩弧焊argon protected welding

9.26 惰性气体供应inert-gas supply, shielding-gas supply

9.27 惰性气体焊枪inert-gas torch for inert-gas welding

9.28 乙炔焊acetylene

9.29 乙炔瓶acetylene cylinder

9.30 乙炔气界面gas connection, acetylene connection

9.31 瓦斯控制gas control, acetylene control 9.32 瓦斯管gas hose

9.33 氧气瓶oxygen cylinder

9.34 氧气界面oxygen connection

9.35 氧气管oxygen hose

9.36 氧化oxidation

9.37 高压压力表high-pressure manometer 9.38 低压压力表low-pressure manometer 9.39 水箱water hank

9.40 原子氢焊atomic hydrogen arc welding 9.41 电焊工arc welder, welder

9.42 容器焊工boilermaker

9.43 电焊面罩arc welding helmet

9.44 五把手套five-fingered welding glove 9.45 焊把臂electrode arm

9.46 焊条把electrode holder

9.47 电焊条压力缸electrode-pressure cylinder

9.48 电焊条filler rod

9.49 填充物filler

9.50 角焊fillet

9.51 测厚仪fillet gauge, Aml.guage, weld gauge

9.52 型材冷弯机cold bending machine for profiles 9.53 弯管机pipe bending machine

9.54 钢管压弯模bending die for steel tube 9.55 双动冲床double-action punching machine

9.56 龙门冲床double column punching machine

9.57 单点液压矫正机single pole correction press

9.58 移动式摇臂钻床movable radial drilling machine

9.59 深喉冲床deep-throat punching machine

9.60 夹件焊装翻转架revolving fixture for core clamping fabrication

9.61 焊接变位架welding transposition fixture

9.62 小转台small turntable

9.63 螺杆桩焊机stud welder

9.64 点焊机spot welder

9.65 缝焊机seam welder

9.66 多点焊机multi-point spot welder

9.67 端面车床surface lathe

9.68 油箱试漏leakage test for tank

9.69 油箱强度试验strength test for tank 9.70 真空强度试验vacuum test for tank 9.71 煤油着色试漏coloured kerosene leakage test

9.72 荧光试漏fluorescent leakage test

9.73 超声探伤ultrasonic flaw detection

9.74 磁力探伤magnetic flaw detection

9.75 清除焊药皮clear away welding flux 9.76 清除焊渣飞溅clear away welding splashes

9.77 清渣锤chippung hammer

9.78 焊渣箱scrap box

9.79 除锈clear away rust

9.80 钢板预处理pre-cleaning for steel plate 9.81 型钢预处理pre-cleaning for shape steel

9.82 喷砂处理shot blast cleaning

9.83 喷漆lacquer

9.84 涂漆surface painting

9.85 油箱内壁涂漆inner surface painting of tank

9.86 防锈底漆antirust primer

9.87 环氧铁红底漆iron red epoxy primer 9.88 淋漆,喷漆lacquer showering

9.89 溶剂，稀释剂thinner

9.90 硝基漆nitrocellulose lacquer/alkyd base lacquer

9.91 瓦楞箱壁油箱corrugated wall tank PART 10 变压器装配

10.1 空调室air-conditioning room

10.2 真空吸尘器vacuum cleaner

10.3 器身active part/internal part/core and winding assembly

10.4 绝缘装配insulation assembly

10.5 器身装配active part assembly, internal part assembly

10.6 器身放入油箱entanking of active part 10.7 附件安装mounting of accessories 10.8 总装配final assembly

10.9 自动升降装配架automatic assembly scaffold

10.10 皱纹纸crepe paper

10.11 丹尼森微皱纹纸Dennison micro-crepe paper

10.12 绝缘纸insulating paper

10.13 绝缘纸板insulating pressboard

10.14 魏德曼绝缘纸板Weidmann insulating pressboard

10.15 层压板laminated board

10.16 绝缘纸筒insulating cylinder

10.17 成形绝缘件insulating mould parts 10.18 绝缘角环insulating angle ring

10.19 分瓣角环split angel ring

10.20 软角环petal collar

10.21 绝缘件insulation pieces

10.22 绝缘纸筒杀紧器tightening device for winding cylinder

10.23 斜纹布带twill cotton tape

10.24 平纹布带plain cotton tape

10.25 线圈吊具winding hoisting tool

10.26 双爪线圈吊具two-leg winding hoisting tool

10.27 线圈围屏的安装assembly of insulating screen for windings

10.28 线圈围屏winding screen

10.29 围屏拉带fastening belt of screen 10.30 插板刀lamination inserting knife 10.31 拆除上轭dismantle of upper yoke 10.32 插板reinsertion of upper yoke

10.33 轭片Ⅱ形夹Ⅱ-shaped clips for upper yoke

10.34 引线附加绝缘additional insulation of lead

10.35 引线夹leads clamping

10.36 引线支架supporting frame for leads 10.37 静电屏蔽electrostatic shield

10.38 磁屏蔽magnetic shield

10.39 磁分路magnetic shunt

10.40 直角支撑件angle support

10.41 软电缆flexible cable

10.42 引线的绝缘包扎insulation wrapping of leads

10.43 引线绝缘lead insulation

10.44 引线长度lead length

10.45 引线的联结lead connection/attachment

10.46 引线的紧固fastening of leads connections

10.47 相应端子corresponding terminal 10.48 有载开关on-load tap-changer(OLTC) 10.49 切换开关diverter switch

10.50 选择开关selector switch

10.51 转换选择器change-over selector 10.52 粗选择器coarse tap selector

10.53 触头组set of contacts

10.54 最大分接maximum tapping

10.55 最小分接minimum tapping

10.56 额定分接rated tapping, principal tapping

10.57 软连接片flexible connecting strip 10.58 铜焊机brazing transformer

10.59 磷铜焊料phosphor-copper brazing metal

10.60 铜焊钳夹brazing pliers

10.61 锡焊soldering

10.62 真空干燥vacuum drying

10.63 汽相干燥vapour-phase drying(VPD) 10.64 煤油汽相干燥kerosene vapour-phase drying

10.65 汽相加热阶段vapour-phase heating period

10.66 高真空阶段high vacuum period

10.67 整理，压服，干燥trimming, compressing and drying

10.68 真空注油阶段vacuum oil-filling period

10.69 煤油蒸发器kerosene evaporator 10.70 煤油回收泵kerosene recycling pump 10.71 煤油热载体kerosene heat carrier 10.72 蒸汽加热排管steam heating radiators 10.73 真空干燥罐vacuum drying autoclave/oven

10.74 卧式真空罐side-loading vacuum drying autoclave

10.75 立式真空罐top-loading vacuum drying autoclave

10.76 罐盖启开油缸opening mechanism of autoclave cover

10.77 热风循环干燥drying with hot-air circulation

10.78 干燥炉drying autoclave, drying oven 10.79 真空浸油oil impregnation under vacuum

10.80 真空系统vacuum plant

10.81 真空泵vacuum pump

10.82 真空阀vacuum valve

10.83 真空计vacuum guage

10.84 增压泵booster pump

10.85 自动记录仪表autographic recording instrument

10.86 干燥的终点判断terminus determination of drying process

10.87 露点测量dew point measurement 10.88 线圈油压千斤顶hydraulic jacks for winding compression

10.89 油压泵站hydraulic pump station 10.90 引线绝缘包扎机lead insulation wrapping machine

10.91 冷压焊cold pressing

10.92 冷焊crimping

10.93 冷压焊钳cold pressing pliers

10.94 弧铜焊arc brazing

10.95 箱壁绝缘隔板insulation diaphram on the tank wall

10.96 绝缘成形件paper moulded insulating part

10.97 挤压、热压extrusion 10.98 折迭，合拢fold-up

10.99 移动式净油站movable oil-purificator 10.100 油的脱水deaquation of oil

10.101 油的脱气degassing of oil

10.102 油的脱气装置oil-degassing device 10.103 油过滤芯子cartridge of oil-filter 10.104 过滤filtration

10.105 污油净化purification of contaminated oil

10.106 可翻开式面镜flip-up window

10.107 油基oil base

10.108 石蜡基paraffin base

10.109 环烷基naphthene base

10.110 油的综合实验simplified tests of oil 10.111 油的析气性gas-separating property of oil

10.112 油闪点flash point of oil

10.113 油凝固点congealing point of oil 10.114 酸值acid value

10.115 抗氧化剂antioxidant

10.116 抗凝剂anticoagulent

10.117 阻化油inhibited oil

10.118 非阻化油uninhibited oil

10.119 油试验器oil tester

10.120 油的胶体污染colloidal contamination of oil

10.121 胶体颗粒colloidal particle

10.122 吸附附剂absorbent

10.123 油中含气量gas content of oil

10.124 油中含水量moisture content of oil 10.125 油中气体分析试验gas-in-oil analysis tests

10.126 气相色谱分析chromatography, gas analysis

10.127 甲烷methane

10.128 乙炔ethane

10.129 一氧化碳carbon monoxide

10.130 二氧化碳carbon twinoxide

10.131 氧oxygen

10.132 氢hydrogen

10.133 氮nitrogen

10.134 高压套管导杆头inner connecting stud of HV bushing

10.135 线路端子line terminal

10.136 电网测线圈line side winiding

10.137 接地套管earthing bushing

10.138 接地端子earthing terminal

10.139 油处理设备oil treatment plant

10.140 真空注油vacuum oil-filling

10.141 热油循环hot-oil circulation

10.142 注油后静放standstill after oil-filling 10.143 密封试漏leakage test on sealed parts 10.144 密封件，垫片gasket

10.145 气层gas blanket

10.146 穿缆式高压套管cable through type HV bushing

10.147 高压套管绝缘护筒cylindrical insulating barrier of HV bushing

10.148 大电流套管heavy current bushing 10.149 加强式套管long-creepage bushing 10.150 绝缘套管insulating bushing

10.151 绝缘套筒insulating cylinder

10.152 接地标志earthing mark

10.153 中点套管neutral bushing

10.154 有载开关操动机构driving mechanism of OLTC

10.155 电动机构motor drive

10.156 操动机构手柄operating handle of driving mechanism

10.157 活性氧化铝active aluminum oxide/activated alumina

10.158 硅胶silica gel

10.159 电阻温度计resistance thermometer 10.160 信号温度计signaling thermometer 10.161 线圈温度指示器winding temperature indicator

10.162 远距离温度计thermometer with remote indication

10.163 瓷箱porcelain casing

10.164 瓷瓶互感器porcelain casing instrument transformer

10.165 瓷箱压圈clamping ring for porcelain casing

10.166 子膨胀器expander

10.167 二次端子箱secondary terminal box 10.168 胶囊rubber bladder

10.169 电缆夹cable clip

10.170 出厂试验routine test

10.171 型式试验type test

10.172 特殊试验special test 10.173 有载开关顺序试验OLTC sequence test

10.174 变压比试验transformation voltage ratio test

10.175 变比及联结组试验ratio and vector group test, ratio and connection group test 10.176 联结组校验check on connection group, check of connection symbol

10.177 绕组连接图connection diagram of winding

10.178 联结组标号connection symbol 10.179 极性校验check on polarity

10.180 线圈直流电阻试验winding DC resistance measurement

10.181 绝缘电阻insulation resistance

10.182 吸收比absorption ratio

10.183 吸收比测量measurement of absorption ratio

10.184 介损试验loss tangent test

10.185 介质损耗率正切值测试dielectric loss factor tg test

10.186 泄漏电流试验creep current test 10.187 工频耐压试验power frequency withstand voltage test

10.188 工频外施耐压试验power frequency applied voltage withstand test

10.189 外施交流耐压试验separate-source AC voltage withstand test

10.190 负载试验load test

10.191 空载试验no-load test

10.192 感应耐压试验induced over-voltage withstand test

10.193 全波雷电冲击试验full wave lightning impulse test

10.194 截波雷电冲击试验chopped wave lightning impulse test

10.195 操作波冲击试验switching wave impulse test

10.196 局部放电试验partial discharge test 10.197 零序阻抗试验zero-sequence impedance test

10.198 有效值root-mean-square valve(RMS)

10.199 峰值peak value

10.200 电流谐波测量measurement of the

harmonics in the current

10.201 无线电干扰电压测量measurement of radio interference voltage

10.202 振动测量measurement of vibration 10.203 噪声水平测定audio noise level measurement, audible sound level measurement

10.204 渗漏过压试验overpressure test for leakages

10.205 真空试验vacuum test

10.206 温升试验temperature rise test

10.207 线性伏安特性测定measurement of linear volt-smpere characteristics

PART 11 包装及运输

11.1 变压器本体main body of transformer 11.2 大型变压器的拆卸dismounting of large transformer

11.3 大型变压器的发运delivery of large transformer

11.4 铁路运输railway transportation

11.5 公路运输highway transportation

11.6 水路运输water transportation

11.7 海路运输sea transportation

11.8 装车发运loading and delivery

11.9 凹形车saddle bottomed wagon

11.10 落孔车open web girder wagon

11.11 拖车trailer

11.12 卡车truck

11.13 油罐车tanker

11.14 钳夹式车Schnabel wagon

11.15 起重机hoisting crane

11.16 浮吊floating crane

11.17 履带吊caterpillar crane

11.18 铁路轨道吊railway crane

11.19 钢丝绳steel cable

11.20 手拉葫芦chain block

11.21 绞盘与滑轮组capstan and pulley block

11.22 集装箱运输container transport

11.23 包装箱package

11.24 花板包装packaged in crate

11.25 装箱单packing list

11.26 发货日期delivery date

11.27 到站港destination

11.28 原产国country of origin 11.29 目的国country of destination

11.30 发出港port of embarkation

11.31 目的港port of destination

11.32 发货标记shipping mark

11.33 顶部top

11.34 起吊点haul

11.35 从此提起Heave here.

11.36 易碎fragile

11.37 易燃品inflammable

11.38 小心care

11.39 小心轻放Handle with care.

11.40 勿掷Don’t cast

11.41 不准迭放Don’t stack up

11.42 不准倒置Don’t turn over. Keep upright

11.43 勿倾斜Not to be tipped

11.44 保持干燥Keep dry

11.45 在干燥处保存Keep in a dry place 11.46 在冷处保存Keep in a cool place 11.47 怕冷To be protected from cold

11.48 怕热To be protected from heat

11.49 在滚子上移动Use rollers

11.50 重心center of gravity

11.51 限速运输oversize transport

11.52 不准溜放Don’t uncouple with slipping!

11.53 发货人consignor

11.54 收货人consignee

11.55 毛重gross weight

11.56 净重net weight

11.57 毛作净重gross for net

11.58 合同号contract number

11.59 定单号indent number

11.60 项目号item number

11.61 控制号control point

11.62 箱号case No.

11.63 批号batch number, lot number

11.64 车号car number

11.65 浇铸号cast number

11.66 序号serial number

11.67 发货单dispatch list

11.68 交货单delivery order

11.69 发票invoice

11.70 发票号invoice number

11.71 托盘pallet

11.72 叉车fork lift

11.73 装载量loading capacity

11.74 装货港口port of loading

11.75 铁路编组站marshalling yard

11.76 分组subgroup

11.77 产品重量total weight of product 11.78 器身重量weight of active part

11.79 油重weight of oil

11.80 运输重transport weight

11.81 拆卸附件dismantled accessories 11.82 备件spare parts

11.83 易损件parts subjected to wear

11.84 储存寿命storage life

11.85 使用寿命useful life

11.86 充氮运输transported with nutrogen filling

11.87 带油运输transported with oil filling 11.88 运输尺寸图transportation dimension drawing

11.89 铭牌数据rating plate data

11.90 铭牌rating plate, name plate

11.91 标志牌designation plate

11.92 说明牌illustration plate

11.93 标准说明书standard specification 11.94 指示标记indication mark

11.95 标准号design code

11.96 产品代号symbol of product

11.97 产品序号serial No.

11.98 使用条件service condition

11.99 通风要求ventilation

11.100 土建civil construction

11.101 绝缘水平insulation level

11.102 海拔高度working altitude, meters above sea level

11.103 环境温度ambient temperature

11.104 线圈温升winding temperature-rise 11.105 油顶层温升top-oil temperature-rise 11.106 线圈端子位置示意图illustrative drawing for winding terminals

11.107 线圈联结组图illustrative drawing for winding connection

11.108 由…制造manufactured by…PART 12 图纸和技术檔用语

12.1 零件parts/details

12.2 部件component parts 12.3 组件assembly parts

12.4 基础件basic parts

12.5 共享件shared parts

12.6 从…借用shared with…

12.7 标准件standard parts

12.8 外购件general parts

12.9 附件accessories

12.10 配合件mating parts

12.11 可拆卸件dismountable parts

12.12 成套设备a complete set of equipment 12.13 初步设计preliminary design

12.14 技术设计technical design

12.15 技术设计说明instruction for technical design

12.16 施工图设计working drawing design 12.17 技术协议technical agreement

12.18 技术设计任务书assignment for technical design

12.19 技术条件technical condition

12.20 技术要求technical requirement

12.21 合同附件annex to the contract/appendix to the contract

12.22 检验鉴定大纲examination and appraisal program

12.23 试制总结summary of trial production 12.24 型式试验报告type test report

12.25 出厂试验报告routine test report 12.26 技术经济分析technical and economical analysis

12.27 可行性分析feasibility study

12.28 出厂技术檔technical documents for product delivery

12.29 产品合格证quality certificate

12.30 变压器使用说明书operation instruction of transformer

12.31 技术证书technical certificate

12.32 技术数据technical regulation

12.33 技术手册technical manual

12.34 试验条件test condition

12.35 试验数据test data

12.36 试验号test number

12.37 试验样品号test piece number

12.38 试验结果test result

12.39 总图general layout

12.40 外形尺寸图overall dimension

drawing

12.41 安装图installation drawing

12.42 示意图illustrative drawing

12.43 线路原理图principle circuit diagram 12.44 方框图block diagram

12.45 表table

12.46 图表graph

12.47 图纸drawing

12.48 图号drawing number

12.49 尺寸dimension

12.50 运输图shipping dimension drawing 12.51 地基图foundation drawing

12.52 原图originals

12.53 底图transparent print

12.54 蓝图blue print

12.55 复制图duplicates

12.56 图样目录contents of drawing

12.57 文件目录contents of documents 12.58 零件明细表detail list of parts

12.59 外购件明细表detail list of purchased parts

12.60 产品用户一览表reference list of customers

12.61 图纸标题栏title block of drawing 12.62 副标记sublet number

12.63 项号items/numbers

12.64 项目号item number

12.65 序号number of the specification

12.66 图号drawing No.

12.67 卷号reel number

12.68 参考号reference number

12.69 参考字母reference letter

12.70 参考值reference value

12.71 单个重量unit weight

12.72 设计者designed by …

12.73 校核者checked by…

12.74 审定者approved by…

12.76 设计审核design review

12.77 隶属装配图号pertaining to assembly drawing No

12.78 比例scale

12.79 纸型paper size

12.80 其余倾角for unmarked edges

12.81 淬火hardening

12.82 表面淬火surface hardening 12.83 表面发蓝surface bluing

12.84 镀锌galvanized

12.85 镀镍nikel plating

12.86 镀铬chromium plating

12.87 镀镉cadmium plating

12.88 镀锡tin plating

12.89 镀银silver plating

12.90 酸洗pickling

12.91 磷化phosphorated

12.92 钝化passivation

12.93 涂两遍底漆coated with two layers of primer

12.94 表漆surface coating

12.95 半导体涂层semi-conducting coating 12.96 热浸hot dipping

12.97 防晕层anti-corona coating

12.98 点固焊tack weld

12.99 角焊fillet weld

12.100 点焊spot weld

12.101 螺杆桩焊stud weld

12.102 配焊welded according to practical condition

12.103 与配合件同时钻孔drilled together with mating parts

12.104 钻后铰孔ream after drilling

12.105 透孔through hole

12.106 喷砂处理blast cleaning, shot cleaning, shotblast

12.107 焊后磨平grinding to flat after welding

12.108 去毛刺clear away burrs

12.109 回火tempering

12.110 校直straightening

12.111 校平flattening

12.112 对称symmetrical parts

12.113 锥度孔tapered hole

12.114 锻件forging parts

12.115 压锻件die casing parts

12.116 角钢长angle L

12.117 槽钢长channel L

12.118 整齐度evenness

12.119 表面光洁度finish

12.120 表面粗糙度roughness

12.121 倾斜度inclination

12.122 园度circularity

变压器专业英语词汇汇编

变压器专业重点英语 词汇汇编 二〇一〇年五月

Power transformer Power transformer with on load tap changer (off-circuit tap changer) 电力变压器有载分接开关（断电路分接开关）Distribution transformer Auto transformer 自耦变压器 Interconnecting transformer联络变压器 Step up transformer Step down transformer Generator transformer Substation transformer 配电发电机 Converter transformer换流变压器 Transformer with split windings分裂变压器 Power plant transformer厂用变压器 Single phase transformer Three phase transformer Oil immersed transformer Dry type transformer Cast resin transformer浇注式树脂变压器 Gas insulated transformer气体绝缘变压器 Three phase bank with separate single-phase transformer Furnace transformer 电炉变压器

Rectifier transformer整流变压器 Traction (locomotive) transformer牵引（机车）变压器Mining transformer矿用变压器 Testing transformer 试验变压器 Cascade testing transformer级联试验用变压器 Three winding transformer Movable substation 移动变电站 Complete substation Current transformer (CT) Voltage transformer (VT) Bus-type current transformer母线式电流互感器 Porcelain type current transformer 瓷式 Bushing current transformer套管式ct Capacitor type current transformer电容式ct Reverse type current transformer反向式ct Cast resin current transformer Capacitor voltage transformer Earthed voltage transformer Combined instrument transformer组合式变压器 Moving-coil voltage regulator 动圈式电压调节器

电力专业常用英语词汇()

网易电力专业英语词汇(较全) 1）元件设备 三绕组变压器：three-column transformer ThrClnTrans 双绕组变压器：double-column transformer DblClmnTrans 电容器：Capacitor 并联电容器：shunt capacitor 电抗器：Reactor 母线：Busbar 输电线：TransmissionLine 发电厂：power plant 断路器：Breaker 刀闸(隔离开关)：Isolator 分接头：tap 电动机：motor 2）状态参数 有功：active power 无功：reactive power 电流：current 容量：capacity 电压：voltage 档位：tap position 有功损耗：reactive loss 无功损耗：active loss 空载损耗：no-load loss 铁损：iron loss 铜损：copper loss 空载电流：no-load current 阻抗：impedance 正序阻抗：positive sequence impedance 负序阻抗：negative sequence impedance 零序阻抗：zero sequence impedance 无功负载：reactive load 或者QLoad 有功负载: active load PLoad 遥测：YC(telemetering) 遥信：YX 励磁电流(转子电流)：magnetizing current 定子：stator 功角：power-angle

上限:upper limit 下限：lower limit 并列的：apposable 高压: high voltage 低压：low voltage 中压：middle voltage 电力系统 power system 发电机 generator 励磁 excitation 励磁器 excitor 电压 voltage 电流 current 母线 bus 变压器 transformer 升压变压器 step-up transformer 高压侧 high side 输电系统 power transmission system 输电线 transmission line 固定串联电容补偿fixed series capacitor compensation 稳定 stability 电压稳定 voltage stability 功角稳定 angle stability 暂态稳定 transient stability 电厂 power plant 能量输送 power transfer 交流 AC 装机容量 installed capacity 电网 power system 落点 drop point 开关站 switch station 双回同杆并架 double-circuit lines on the same tower 变电站 transformer substation 补偿度 degree of compensation 高抗 high voltage shunt reactor 无功补偿 reactive power compensation 故障 fault 调节 regulation 裕度 magin 三相故障 three phase fault 故障切除时间 fault clearing time 极限切除时间 critical clearing time 切机 generator triping

电气工程专业英语词汇汇总(综合版)

电气工程师专业英语词汇汇总 10kV distribution substation 10kV配电所abrupt change of voltage 电压突变accumulation of electric energy 电能存储actuating coil 动作线圈adjustment diagram 调整图 alarm 报警 alarm signal 报警信号alternating light 变光灯 ammeter 电流表 apparent energy consumption unit 单位视在能耗 arc furnace 电弧炉 armature 电枢 arrester; lighting arrester; surge diverters 避雷器 automatic voltage regulator 电压自动调整器backlighting; background illumination 背景照明 battery box 电池箱 battery charger 电池充电器battery contactor 电池接触器battery fuse 电池保险丝battery resistor 电池电阻器 blow-out coil 磁吹线圈 boom 吊杆 bracket (OCS) 底座（接触网）； 支架；托架bracket for headspan wire 定位索底座bridge 电桥 brush 电刷 built-in wardrobe; built-in closet; closet 壁灯 bulb; light(lamp) bulb; electric bulb 灯泡 butterfly valve with electric actuator 电动蝶阀 button 电钮 cable and accessories 电缆及附件 cable armour 电缆铠装 cable bays 电缆电线间隔cable box 电缆箱 cable bracket; cable tray 电缆托架 cable continuity test 电路复测 cable differential protection 电缆差动保护

变压器常用术语英语

变压器常用术语TECHNICAL TERMS COMMONLY USED FOR TRANSFORMER PART 1产品名称及类型 1.1电力变压器Power transformer 1.2芯式变压器core type transformer 内铁式变压器core-form transformer 1.3壳式变压器shell-form transformer 外铁式变压器shell-form transformer 1.4 密封式变压器sealed transformer 1.5 有载调压电力变压器 power transformer with OLTC 1.6 无载调压电力变压器 power transformer with off-circuit tap-changer 1.7 配电变压器distribution transformer 1.8 自耦变压器auto-transformer 1.9 联络变压器 interconnecting transformer 1.10升压变压器step-up transformer 1.11降压变压器step-down transformer 1.12 增压变压器booster transformer 串联变压器 1.13 发电机变压器generator transformer 1.14 电站用变压器substation transformer 1.15 交流变压器converter transformer 1.16 分裂变压器 split-winding type transformer 1.17 厂用变压器power plant transformer

最新变压器英语词汇

变压器英语词汇

变压器有关名词术语英译词汇表 A GLOSSARY FOR ENGLISH TRSNSFORMER OF TRANSFORMER TERMINOLOGY 目录 TABLE OF CONTENTS 目录----------------------------------------------------1 基础词汇----------------------------------------------------2 常用单位----------------------------------------------------5 各类产品名称及类型-------------------------------------------------------6 铁芯及铁芯制造----------------------------------------------------8 线圈及线圈制造----------------------------------------------------9 油箱附件及油箱制造-------------------------------------------------------11 装配及干燥，油处理-------------------------------------------------------13 包装及运输-------------------------------------------------------15 图纸及技术文件用语-------------------------------------------------------17 质量控制及试验设备-------------------------------------------------------20 常用生产及工装设备-------------------------------------------------------21 材料标准件及标准零件----------------------------------------------------22 1

电气专业常用英语词汇

电气专业常用英语词汇

generator 发电机电气专业常用英语词汇 excitation 励磁 excitor 励磁器 voltage 电压 current 电流 step-up transformer 升压变压器 bus 母线 transformer 变压器空载损耗：no-load loss iron loss 铁损：copper loss 铜损： no-load current 空载电流： reactive loss 有功损耗：active loss 无功损耗： power transmission system 输电系统 high side 高压侧 transmission line 输电线高压: high voltage low voltage 低压：middle voltage 中压：功角稳定 angle stability stability 稳定 voltage stability 电压稳定 transient stability 暂态稳定 power plant

电厂 power transfer 能量输送 AC 交流 DC 直流 power system 电网 drop point 落点 switch station 开关站 regulation 调节高抗 high voltage shunt reactor apposable 并列的： margin 裕度 fault 故障 three phase fault 三相故障 tap 分接头： generator triping 切机 high limited value 高顶值 static (state) 静态． 动态 dynamic (state) 机端电压控制 AVR 电抗 reactance 电阻 resistance 功角 power angle 有功（功率） active power 电容器：Capacitor 电抗器：Reactor 断路器：Breaker 电动机：motor 功率因数：power-factor 定子：stator 阻抗：impedance 功角：power-angle 电压等级：voltage grade 有功负载: active load PLoad 无功负载：reactive load 档位：tap position 电阻：resistor 电抗：reactance 电导：conductance 电纳：susceptance 上限:upper limit 下限：lower limit 正序阻抗：positive sequence impedance 负序阻抗：negative sequence impedance 零序阻抗：zero sequence impedance 无功（功率） reactive power 功率因数 power factor 无功电流 reactive current 斜率 slope 额定 rating 变比 ratio 参考值 reference value 电压互感器 PT

变压器英语词汇表

特别能战斗、特别能吃苦、特别能奉献、特别能学习 变压器有关名词术语英译词汇表 A GLOSSARY FOR ENGLISH TRANSLATION OF TRANSFORMER TERMINOLLGY Ⅰ、基础词汇 1 （变压器的）电压组合 V oltage combination (of a transformer) 2 额定电压． Rated voltage 3 额定电流 Rated current 4 额定容量 Rated power 5 额定电压比 Rated voltage ratio 6 空载电流（激磁电流） No-load current(exciting current) 7 空载损耗 No-load loss 8 负载损耗 Load loss 9 附加损耗 Additional losses 10 杂散损耗 Stray losses 11 阻抗电压 Impedance voltage 12 电阻电压 Resistance voltage 13 电抗电压 Reactance voltage 14 电压调整率 V oltage regulation 15 相位差 Phase displacement 16 零序阻抗 Zero-sequence impedance 频率：工频 Frequency ,power-frequency 中频 Medium frequency 17 高频 High frequency 18 震荡频率 Oscillating frequency 19 谐振频率 Resonance frequency 20 自振频率 Natural frequency of vibration 21 频率响应 Frequency response 22 绝缘强度 Dielectric strength ,insulation strength 23 主绝缘 Main insulation 24 纵绝缘 Longitudinal insulation 25 介电常数 Dielectric constant 26 油-纸绝缘系统 Oil-paper insulation system 27 绝缘击穿 Insulation breakdown 28 沿面放电（爬电） Creeping discharge 29 放电 Discharge 30 局部放电 Partial discharge 31 破坏性放电 Disruptive discharge 32 局部放电起始电压 Partial discharge inception voltage 33 局部放电终止电压 Partial discharge extinction voltage 34 过电压 Overvoltage 35 短时过电压 Short time overvoltage 36 暂态过电压 Transient overvoltage 37 操作过电压 Switching overvoltage 38 大气过电压 Atmospheric overvoltage 39 额定耐受电压 Rated withstand voltage 40 短时工频耐受电压Short-duration power-frequency withstand voltage 41 额定雷电(操作)冲击耐受电压 Rated lightning (switching)impulse withstand voltage 42 屏蔽 Shielding 43 静电屏蔽 Electrostatic shielding 44 磁屏蔽 Magnetic shielding 45 标准大气条件 Standard atmospheric condition 46 视在电荷 Apparent charge 47 全波雷电冲击 Full wave lightning impulse

电气专业英语词汇

电气专业英语词汇公司内部编号：（GOOD-TMMT-MMUT-UUPTY-UUYY-DTTI-

电流current 电压voltage 功率power 电阻resistance 电容capacitance 电抗reactance 电阻率resistivity 阻抗impedance 相位phase 有功功率activepower 无功功率reactivepower 视在功率apparentpower装设功率installedpower 供电局powersupplyauthority电力公司powersupplycompany 发电厂powerplant 变电所substation 配电站distributionsubstation配变电站transformerstation 终端变电站terminalsubstation 车间变电站substationinworkshop: 室内变电站indoorsubstation 自动变电站automaticsubstation 成套变电站unitsubstation 高压室room 低压室room 变压器室transformerroom变压器平台transformerplatform 柴油发电机室dieselgeneratorroom 控制室controlroom蓄电池室batteryroom 值班室dutyroom休息室restroom电容器室condenserroom 充电室battery--chargingroom室外储油罐outdooroiltank 地下油罐undergroundoiltank日用油箱daytank 负荷load

变压器常用术语 英语

变压器常用术语 TECHNICAL TERMS COMMONLY USED FOR TRANSFORMER PART 1产品名称及类型 1.1电力变压器Power transformer 1.2芯式变压器core type transformer 内铁式变压器core-form transformer 1.3壳式变压器shell-form transformer 外铁式变压器shell-form transformer 1.4 密封式变压器sealed transformer 1.5 有载调压电力变压器power transformer with OLTC 1.6 无载调压电力变压器power transformer with off-circuit tap-changer 1.7 配电变压器distribution transformer 1.8 自耦变压器auto-transformer 1.9 联络变压器interconnecting transformer 1.10升压变压器step-up transformer 1.11降压变压器step-down transformer 1.12 增压变压器booster transformer 串联变压器 1.13 发电机变压器generator transformer 1.14 电站用变压器substation transformer 1.15 交流变压器converter transformer 1.16 分裂变压器split-winding type transformer 1.17 厂用变压器power plant transformer 1.18 所用变压器electric substation transformer 1.19 单相变压器single-phase transformer 1.20 三相变压器three-phase transformer 1.21 多相变压器polyphase transformer 1.22 单相变压器组成的三相组three-phase banks with separate single-phase transformer 1.23 三相接地变压器three-phase earthing transformer 1.24 三线圈变压器three-winding transformer 1.25 两线圈变压器two-winding transformer 1.26 双线圈变压器double-winding transformer 1.27 多线圈变压器multi-winding transformer 1.28 油浸式变压器oil-immersed type transformer 1.29 浸难燃油变压器noninflammable medium impregnated transformer 1.30 干式变压器dry type transformer 1.31 树脂浇注式变压器resin-casting type transformer 1.32 H级绝缘变压器transformer with H class insulation 1.33 气体绝缘变压器gas insulated transformer 1.34 电炉变压器furnace transformer 1.35 整流变压器rectifier transformer 1.36 列车牵引变压器traction transformer, locomotive transformer 1.37 矿用变压器mining transformer 1.38 防爆变压器explosion-proof transformer flame-proof transformer 1.39 隔离变压器isolation transformer 1.40 试验变压器testing transformer 1.41 串级式试验变压器cascade testing transformer 1.42 串联变压器series transformer 1.43 增压变压器booster transformer 1.44 灯丝变压器filament transformer 1.45 电焊变压器welding transformer 1.46 钎焊变压器brazing transformer 1.47 船用变压器marine transformer 1.48 起动自耦变压器starting autotransformer 1.49 起动变压器starting transformer 1.50 移动变压器movable substation 1.51 移动式movable type 1.52 成套变电站complete substation 1.53 全自动保护单相变压器complete self-protected single-phase transformer(CSP) 1.54 互感器instrument transformer 1.55 测量用互感器measurement current/voltage TR 1.56 保护用互感器protective current/voltage transformer 1.57 电流互感器current transformer（CT）1.58 电压互感器voltage transformer potential transformer(PT) 1.59 全绝缘电流互感器fully insulated

火力发电厂常用英语词汇

火力发电站常用英语技术词汇boiler house: 锅炉房 coal conveyor 输煤装置 coal bunker: 煤仓 coal mill磨煤机 steam boiler, water boiler tube 蒸汽锅炉,管式锅炉furnace(combustion chamber): 炉膛( 燃烧室) water tube: 水管 ash pit 灰坑 superheater: 过热器 water preheater: 水预热器 air preheater: 空气预热器 gas duct(flue): 烟气管, 烟道 dust collecting plant: 集尘室 electrical precipitation plant: 电气除尘室induced draught fan: 引风机 chimney: 烟囱 deaerator: 除氧器 feed water tank: 供水箱 boiler feed pump: 给水泵 switchgear: 开关设备 cable tunnel: 电缆通道 cable cellar: 电缆槽 turbine room: 汽轮机室 steam turbine with alternator: 蒸汽汽 轮发电机组economizer: 省煤器 steam drum: 汽包 surface condenser: 表面凝汽 low-pressure preheater: 低压预热器 circulating water pipe(pump): 循环水 管 control room: 控制室 electrostatic dust remover(precipitator): 静电除尘器pulverizer 磨煤机 slag pump 灰渣泵 thermal cycle: 热力循环 (net)heat rate: (净)热耗率 Assemblie: 集合,集结,组装 comment 注释,评论 module : 模块standby: 备用 proximity 相近,接近,亲近 detector: 探测器bracket: 支架 interlocks 互锁,联锁axial: 轴向的 surge conditions: 喘振: accessory: 附件pulsation: 有节奏的跳 动,跳动 fossil fired: 燃煤intent: 意图,目的,意向

电气专业常用英语词汇

A Abnormal异常 Accuracy精度 ACSR = aluminum conductor steel reinforced钢芯钻铰线 adjustment 调整 adjustable range可调范围 fine adjustment细调 rough adjustment粗调 air gap气隙 alarm 报警 alarm bell警铃 alarming window报警窗口 ampacity载流量 ampere安培 kilovolt ampere千伏安amperemeter安培表，电流表amplifier放大器 announciator报警器 anode阳极 anti-corrosion防腐蚀 anti-pumping device防跳装置 AOL = aircraft obstruction lamp航空障碍灯 low intensity AOL低光强航空障碍灯high intensity AOL高光强航空障碍灯AQR = automatic reactive power regulator自动无功功率调整器 arcing chamber灭弧室 armature电枢 ASS = automatic synchronizing system 自动同期系统 asynchronous 非同期 non-asynchronous capability非同期能力

B ballast镇流器 ballast-factor镇流器系数 ball eyes 球头挂环 battery蓄电池 Cd-Ni battery镉-镍蓄电池 lead-acid battery铅-酸蓄电池maintenance free battery 免维护蓄电 池 battery capacity蓄电池容量 battery rack电池架 battery room蓄电池室 end battery端电池 BIL = basic insulation level绝缘基本冲击耐压水平 blocking diode闭锁二极管 box 盒，箱 cast aluminum junction box铸铅接线 盒 cast Ferro alloy junction box铸铁合金 接线盒 junction box接线盒 lead box出线箱 maintenance box检修箱 marshalling box(总配线箱) power supply box动力箱 terminal box端子箱 test box试验盒 normal lighting box 工作照明箱breaker 断路器 close the breaker 合断路器 open the breaker打开断路器 breaker compartment 断路小室 PT circuit broken PT回路断线 brush 刷 graphite brush石墨碳刷 brush holder刷握 brush supporter刷架 brushless excitation system无刷励磁系 统 bus 母线 branch bus分支母线 by-pass bus 旁母 main bus 主母线 bus tie母联 flexible busbar 软母线 hard busbar硬母线 miniature busbar 小母线 tubular busbar管型母线changeover busbars倒母线bushing 套管 oil filled bushing充油套管 seal-off bushing密封套管 wall bushing穿墙套管 bushing lead terminal套管端子button 钮子 push button 按钮 self-holding push-button 自保持按钮turn button旋钮 buzzer蜂鸣器

电机常用英语词汇

电动机：motor 直流电动机：direct current motor 交流电动机：alternating current motor 交直流两用电动机：universal motor 同步电动机： synchronous motor {siNkrEnEs] 笼型同步电动机： cage synchronous motor 同步感应电动机：synchronous induction motor 磁阻电动机： reluctance motor 亚同步磁阻电动机： subsynchronous reluctance motor 异步电动机：asynchronous motor {eI`sINkrEnEs} 感应电动机： induction motor 无刷绕线转子感应电动机：brushless wound-rotor induction motor 他励：separately excited 自励：self-excited 混励：compositely excited 并励：shunt 串励：series 复励：compound excited 复励：用以指明电机至少由两个绕组励磁，其中之一是串励绕组 绕组：winding 初级绕组：primary winding 次级绕组：secondary winding 主绕组：main winding 定子绕组：stator winding 转子绕组：rotor winding 电枢绕组：armature winding 阻尼绕组：damping winding 起动绕组：starting winding 辅助起动绕组： auxiliary starting winding 励磁绕组： excitation winding 磁场绕组： field winding 试验： 性能试验：performance test 型式试验：type test 重复试验：duplicated test 检查试验：routing test 对每台电机在制造完工后所进行的试验，以判明其是否符合标准 抽样试验：sampling test

变压器中英文术语

变压器中英文术语-3D Shock recorder 3D 冲击载荷记录器 准确级 Acid value（KOH mg/g) 酸值 Acid-base reaction (PH) 酸碱反应 Across the isolating distance of 通过隔离开关isolating switches air gap 空气间隙 Alarm circuit（Upper limit output）报警回路（上限输出）Alarms and tripping 警报和跳闸 along with CT outlet box 出线匣 Altitude 海拔高度 Anti earth-quake grade 耐地震强度Antivibration pad 防震垫 Assembly drawing 装配图 Auxiliary power supply 辅助电源供电 Base Materials 母材 Basic parameter 基本参数 Bellows pipe 波纹管 below the lower transformation 低于下转变温度temperature Bolt 螺栓 Break,Open 断,通 Breakdown voltage of the oil 油击穿电压 Burden(V A) 负荷 bus 母线 Butterfly valve 蝶阀 butterfly valve seals 蝶阀密封 by Infrared 红外线法 by resistance 电阻法 by thermometer 温度计法 cabinet for cable connections, auxiliary relays and cooling system control,Fan 风控箱 control box cabinets 控制柜 Cable Tray Assembly 电缆槽装置 cabling 布线 capacity on valve side 阀侧容量 capacity online side 网侧容量 Capacity ratio 容量比 Center line of tank 油箱中心线 Center of gauge 轨距中心

变压器术语专业词汇中英双语对照

变压器有关名词术语英译词汇表 A GLOSSARY FOR ENGLISH TRSNSFORMER OF TRANSFORMER TERMINOLOGY 目录 TABLE OF CONTENTS 目录----------------------------------------------------1 基础词汇----------------------------------------------------2 常用单位----------------------------------------------------5 各类产品名称及类型-------------------------------------------------------6 铁芯及铁芯制造----------------------------------------------------8 线圈及线圈制造----------------------------------------------------9 油箱附件及油箱制造-------------------------------------------------------11 装配及干燥，油处理-------------------------------------------------------13 包装及运输-------------------------------------------------------15 图纸及技术文件用语-------------------------------------------------------17 质量控制及试验设备-------------------------------------------------------20 常用生产及工装设备-------------------------------------------------------21 材料标准件及标准零件----------------------------------------------------22 1 Ⅰ. 基础词汇 BASIC TERMINOLOGY 1. 变压器的电压组合 voltage combination ( of a transformer) 2. 额定电压rated voltage 3. 额定电流rated current 4. 额定容量rated power 5. 额定电压比 rated voltage ratio 6. 空载电流no-load current 7. 空载损耗no-load loss 8. 负载损耗load loss 9. 附加损耗additional loss 10. 杂散损耗stray loss 11. 阻抗电压 impedance voltage 12. 电阻电压resistance voltage 13. 电抗电压reactance voltage 14. 电压调整率voltage regulation 15. 相位差phase displacement 16. 零序阻抗 zero-sequence impedance 17. 工频power frequency 18. 中频medium frequency 19. 高频high frequency 20. 振荡频率oscillating frequency

电气专业常用英语词汇

电气专业常用英语词汇 电气专业常用英语词汇发电机 generator 励磁 excitation 励磁器 excitor 电压 voltage 电流 current 升压变压器 step-up transformer 母线 bus 变压器 transformer 空载损耗：no-load loss 铁损：iron loss 铜损：copper loss 空载电流：no-load current 有功损耗：reactive loss 无功损耗：active loss 输电系统 power transmission system 高压侧 high side 输电线 transmission line 高压: high voltage 低压：low voltage 中压：middle voltage 功角稳定 angle stability 稳定 stability 电压稳定 voltage stability 暂态稳定 transient stability 电厂 power plant 能量输送 power transfer 交流 AC 直流 DC 电网 power system 落点 drop point 开关站 switch station 调节 regulation 高抗 high voltage shunt reactor 并列的：apposable 裕度 margin 故障 fault 三相故障 three phase fault 分接头：tap 切机 generator triping 高顶值 high limited value 静态 static (state)

变压器用英语术语

Q/BB 保定天威特变电气有限公司 企业标准 Q /BB 150.033-2000 变压器图样文件用英语术语 2000-06-15发布 2000-07-15实施标准化委员会发布

Q/BB 150.033-2000 前言 本标准是根据企业实际情况对企标Q/BB.150.033-1999《变压器图样文件用英语名词术语》进行修订的。本标准在编写格式上按GB/T 1.1-1993等有关标准的规定。 本标准修改的主要内容是将其中的保定变压器厂改为保定天威特变电气有限公司。 本标准从2000年7月15日起实施。 本标准从生效之日起，同时代替Q/BB 150.033-1999。 本标准编制 校对 审查 审定 批准 本标准于1984年首次发布，2000年6月第2次修订。

保定天威特变电气有限公司企业标准 Q/BB 150.033-2000 变压器图样文件用英语术语 代替Q/BB 150.033-1999 1 范围 本标准规定了变压器有关图样、文件所用英语术语，为出口变压器设计工作提供方便。 2 引用标准 下列标准包含的条文，通过在本标准中引用而构成为本标准的条文。在标准出版时，所示版本均为有效。所有标准都会被修订。使用本标准的各方应探讨、使用下列标准最新版本的可能性。 GB/T 2900.1-1992《电工术语基础术语》 GB/T 2900.15-1997《电工术语变压器、互感器、调压器和电抗器》 3 技术文件术语 3.1 备件一览表 List of spare parts 3.2 备注 Remarks 3.3 拆卸件一览表 List of dismantled parts 3.4 代号 Drawing number或DWG. NO. 3.5 合格证明书 Certificate of conformity 3.6 技术文件目录 List of technical documents 3.7 名称 Name 3.8 铭牌标志图 Nameplate data 3.9 使用说明书 Operating instructions 3.10 数量 Quantity或QUAN 3.11 项号 Item 3.12 油浸式风冷变压器 Oil-immersed forced-air cooling transformer 3.13 油浸式强迫油循环风冷变压器 Oil-immersed forced-oil forced -air cooling transformer 标准化委员会2000-06-15批准2000-07-15实施