IHB60S2405C中文资料
60 Watt Single Output Half Brick DC/DC Converter
IHB60SC
The IHB60SC series s andard half-brick modules are designed for today’s demanding industrial applications. Available in two wide range input s, t hese isolat ed convert ers offer many feat ures in t he st andard models. With a complement of safety agency approvals and low noise operat ions, t he convert ers respond ext remely fast t o change in load condi ions. Inheren in he design are very well-con rolled ou pu voltages and no need for minimum loading.
SPECIFICATIONS, ALL MODELS
Speci?cations are at T
= +40°C nominal input voltage unless otherwise speci?ed.
SPECIFICATIONS, ALL MODELS
= +40°C nominal input voltage unless otherwise speci?ed.
Speci?cations are at T
*See Application Notes available on the web at https://www.wendangku.net/doc/0e12277560.html,
**X = Either 24 or 48
THROUGH-HOLE SOLDERING INFORMATION
These devices are intended for wave soldering or manual soldering.
They are not intended to be subject to surface mount processes under any circumstances.
The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering.
PIN SIDE UP
PIN SIDE DOWN
MATERIAL: Units are encapsulated in a low thermal resistance mold-ing compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have
UL94V-0 ratings. Lead material is matte tin 100 microinches min., over nickel, 40-80 microinches.
NOTES:
All dimensions are in inches (millimeters).PIN PLACEMENT TOLERANCE: ± 0.005" MECHANICAL TOLERANCE: ± 0.015"
Marked with: speci?c model ordered, date code, job code.
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Speci?cations are subject to change without notice. ? 2009 Murata Power Solutions, Inc.
USA: Mans?eld (MA), Tel: (508) 339 3000, email: sales@https://www.wendangku.net/doc/0e12277560.html, Canada: Toronto, Tel: (866) 740 1232, email: toronto@https://www.wendangku.net/doc/0e12277560.html,
UK: Milton Keynes, Tel: +44 (0)1908 615232, email: mk@https://www.wendangku.net/doc/0e12277560.html,
France:
Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@https://www.wendangku.net/doc/0e12277560.html,
Germany: München, Tel: +49 (0)89-544334-0, email: ped.munich@https://www.wendangku.net/doc/0e12277560.html, Japan: Tokyo, Tel: 3-3779-1031, email: sales_tokyo@https://www.wendangku.net/doc/0e12277560.html,
Osaka, Tel: 6-6354-2025, email: sales_osaka@https://www.wendangku.net/doc/0e12277560.html, China:
Shanghai, Tel: +86 215 027 3678, email: shanghai@https://www.wendangku.net/doc/0e12277560.html, Guangzhou, Tel: +86 208 221 8066, email: guangzhou@https://www.wendangku.net/doc/0e12277560.html,
Singapore: Parkway Centre, Tel: +65 6348 9096, email: singapore@https://www.wendangku.net/doc/0e12277560.html,
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mans?eld, MA 02048-1151 U.S.A.Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
https://www.wendangku.net/doc/0e12277560.html, email: sales@https://www.wendangku.net/doc/0e12277560.html, ISO 9001 & ISO 14001 REGISTERED