齿轮专业英语大全教材
齿轮专业英语大全
齿轮Toothed gear ;Gear 齿面Tooth flank
长幅内摆线Prolate hypocycloid
齿轮副Gear pair
平行齿轮副Gear pair with parallel axes
相交齿轮副Gear pair with intersecting axes
齿轮系Train of gears
行星齿轮系Planetary gear train
齿轮传动Gear drive; Gear transmission
配对齿轮Mating gears
小齿轮Pinion
大齿轮Wheel; Gear
主动齿轮Driving gear
从动齿轮Driven gear
行星齿轮Planet gear
行星架Planet carrier
右侧齿面Right flank
左侧齿面Left flank
同侧齿面Corresponding flank
异侧齿面Opposite flank
工作齿面Working flank
非工作齿面Non-working flank
相啮齿面Mating flank
共轭齿面Conjugate flank
可用齿面Usable flank
有效齿面Active flank
上齿面Addendum flank
下齿面Dedendum flank
短副内摆线Curtate hypocycloid
渐开线Involute; Involute to a circle
延伸展开线Prolate involute
缩短渐开线Curtate involute
球面渐开线Spherical involute
渐开螺旋线Involute helicoid
阿基米德螺旋面Screw helicoid
球面渐开螺旋面Spherical involute; helicoid 圆环面Toroid
圆环面的母圈Generant of the toroit
圆环面的中性圈Middle circle of the toroid
圆环面的中间平面Middle-plane of the toroid
圆环面的内圈Inner circle of the toroid
太阳轮Sun gear
齿顶Crest; Top land
内齿圈Ring gear; Annulus gear
齿根过渡曲面Fillet
啮合干涉Meshing interference
槽底Bottom land
切齿干涉Cutter interference
齿廓型修Profile modification; Profile correction
外齿轮External gear
齿廓Tooth profile
内齿轮Internal gear
中心距Centre distance
端面齿廓Transverse profile
修缘Tip relief
法向齿廓Normal profile
修根Root relief
齿向修行Axial modification; Longitudinal correction 轴交角Shaft angle
轴向齿廓Axial profile
背锥齿廓Back cone tooth profile
连心线Line of centres
减速齿轮副Speed reducing gear pair 齿端修薄End relief
增速齿轮副Speed increasing gear pair 齿线Tooth trace
齿棱Tip; Tooth tip
鼓形修整Crowning
鼓形齿Crowned teeth
齿数比Gear ratio
模数Module
挖根Undercut
传动比Transmission ratio
端面模数Transverse module
瞬时轴Instantaneous axis
轴平面Axial plane
基准平面Datum plane
法向模数Normal module
轴向模数Axial module
瞬时接触点Point of contact
瞬时接触线Line of contact
节平面Pitch plane
径节Diametral pitch
端面啮合线Transverse path of Contact
端平面Transverse plane
齿数Number of teech
当量齿数Virtual number of teeth
啮合曲面Surface of action
法平面Normal plane
啮合平面Plane of action
分度曲面Reference surface
头数Number of starts; Number of threads
螺旋线Helix; Circular; helix
啮合区域Zone of action
总作用弧Total arc of transmission
节曲面Pitch surface
齿顶曲面Tip surface
齿根曲面Root surface
圆锥螺旋线Conical spiral
螺旋角Helix angle; Spiral angle
端
面作用弧Transverse arc of transmission
纵向作用弧Overlap arc
总作用角Total angle of transmission
基本齿廓Basic tooth profile
导程Lead
基本齿条Basic rack
产形齿条Counterpart rack
产形齿轮Generating gear of a gear
产形齿面Generating flank
基准线Datum line
导程角Lead angle
阿基米德螺旋线Archimedes spiral
外摆线Epicycloid
长幅外摆线Prolate epoicycloid
短副外摆线Curtate epoicycloid
端面作用角Transverse angle of transmission 纵向作用角Overlap angle
总重合度Total contact ratio
端面重合度Transverse ratio
纵向重合度Overlap ratio
齿轮Gear teeth; Tooth
摆线Cycloid
标准齿轮Standard gears
齿槽Tooth space
Right-hand teeth
长幅摆线Prolate cycloid
短腐摆线Curtate cycloid
非变位齿轮X-gero gear
标准中心距Reference centre distance
左旋齿Left-hand teeth
内摆线Hypocycloid
Nominal centre
变位齿轮Gears with addendum modification; X-gears
高度变位圆柱齿轮副X-gear pair with reference centre distance 角度变位圆柱齿轮副X-gear pair with modified centre distance 直齿轮Spur gear
斜齿轮Helical gear; Single-helical gear
直齿轮Spur rack
分度圆柱面Reference cylinder
节圆柱面Pitch cylinder
基圆柱面Basic cylinder
高度变为锥齿轮副X-gear pair without shaft angle modification 斜齿轮Helical rack
齿顶圆柱面Tip cylinder
角度变位圆柱齿轮副X-gear pair with shaft angle modification
人字齿轮Double-helical gear
齿根圆柱面Root cylinder
变位系数Modification coefficient
渐开线齿轮Involute cylindrical gear
节点Pitch point
变位量Addendum modification
摆线齿轮Cycloidal gear
节线Pitch line
径向变位系数Addendum modification coefficient
中心距变位系数Centre distance modification coefficient 圆弧齿轮Circular-arc gear ; W-N gear
双圆弧齿轮Double-circular-arc gear
分度圆Reference circle
节圆Pitch circle
圆柱齿轮Cylindrical gear
顶圆Tip circle
假想曲面Imaginary surfance
基圆Basic circle
任意点法向压力角Normal pressure angle at a point
定位面Locating face
任意点断面压力角Transverse pressure angle at a point 根圆Root circle