March 6, 2007
DATATRONIC : 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701
Email: ddisales@https://www.wendangku.net/doc/0a15595325.html,
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specification are subject to change without notice.
LOW PROFILE SHIELDED SMD POWER INDUCTOR DR363 SERIES Features
z Low Profile Surface Mount Design (Height 3.0mm / 0.118 inches) z Inductance Range from 1.0μH to 150μH
z Ideal for variety of DC-DC Converter applications and DSC, DVC, PDA Products
z Operating Temperature : -20°C to +85°C
z Operating Frequency Range : 10kHz – 1MHz
z
Tinned Leads with Leaded Solder is Available (note 4)
Electrical Specifications at 25°C
Rated Current (A) Max Part Number
L (μH) ± 20%
Test Freq. (0.1V)
DCR (m ?) Max (Typ.)
I sat
I rms
DR363-102 1.0 100kHz 13.2 (11.0) 3.59 4.03 DR363-152 1.5 100kHz 15.6 (13.0) 2.93 3.63 DR363-222 2.2 100kHz 19.2 (16.0) 2.42 3.30 DR363-362 3.6 100kHz 25.2 (21.0) 1.89 2.83 DR363-472 4.7 100kHz 32.4 (27.0) 1.66 2.45 DR363-622 6.2 100kHz 38.4 (32.0) 1.45 2.20 DR363-103 10.0 100kHz 58.8 (49.0) 1.14 1.77 DR363-123 12.0 100kHz 62.4 (52.0) 1.04 1.70 DR363-153 15.0 100kHz 74.4
(62.0) 0.93 1.55 DR363-183 18.0 100kHz 88.8 (74.0) 0.85 1.41 DR363-223 22.0 100kHz 114.0 (95.0) 0.77 1.23 DR363-273 27.0 100kHz 144.0 (120.0) 0.70
1.08 DR363-333 33.0 100kHz 168.0 (140.0) 0.63 0.99 DR363-393 39.0 100kHz 180.0 (150.0) 0.58 0.95 DR363-473 47.0 100kHz 22
2.0 (185.0) 0.53 0.84 DR363-563 56.0 100kHz 264.0 (222.0) 0.48 0.76 DR363-683 68.0 100kHz 324.0 (270.0) 0.44 0.69 DR363-823 82.0 100kHz 396.0 (330.0) 0.40 0.61 DR363-104 100.0 100kHz 498.0 (415.0) 0.36 0.54 DR363-154 150.0 100kHz 738.0 (615.0) 0.31 0.42
MECHANICAL OUTLINES
Notes:
1. All dimensions are given in millimeters “mm” (Inches “IN” ref)
2. Unless otherwise specified, tolerance; ± 0,254mm, (0.010 IN)
3. Tape and reel quantity, 2000 pcs/reel
4.
For non-RoHS parts replace DR prefix with 42- (e.g. DR363 becomes 42-363)
5. Terminal finish is compliant to RoHS requirements . Solder in accordance with J-STD-020C
2.6 [0.102]
元器件交易网https://www.wendangku.net/doc/0a15595325.html,