文档库 最新最全的文档下载
当前位置:文档库 › CLAA215FA04 V4-TCL-20101111

CLAA215FA04 V4-TCL-20101111

CLAA215FA04 V4-TCL-20101111
CLAA215FA04 V4-TCL-20101111

Chunghwa Picture Tubes, Ltd. Technical Specification
To : TCL Date : 2010/11/11
CPT TFT-LCD
CLAA 215FA04
V4
ACCEPTED BY:
APPROVED BY
CHECKED BY
PREPARED BY
陳 懋 遷
張 年 讓
VD Business Unit
CHUNGHWA PICTUER TUBES, LTD.
No. 1, Huaying Rd., Sanho Tsun, Lungtan Shiang, Taoyuan, Taiwan, 325, R.O.C. TEL: +886-3-4805678 FAX: +886-3-4800589
Doc. No:
Spec- CLAA215FA04 V4_ TCL
Issue Date: 2010/11/11
T- 3650002- 000- A NEW

CPT
CHUNGHWA PICTURES TUBES, LTD.,
Modification Record List
NO.
Tentative
Issue Date 2010/11/02 Tentative Version for customer.
Modification Index
CPT Confidential
2/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
Table of Content
NO 1 2 3 4 5 6 7 8 9 10 11 Table of Content OVERVIEW ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS INTERFACE PIN CONNECTION INTERFACE TIMING BLOCK DIAGRAM MECHANICAL SPECIFICATION OPTICAL CHARACTERISTICS RELIABILITY TEST CONDITIONS PACKING SPECIFICATION HANDLING PRECAUTIONS FOR TFT-LCD MODULE Note P.4 P.5 P.6 P.10 P.11 P.14 P.15 P.17 P.20 P.22 P.24
CPT Confidential
3/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
1. OVERVIEW
CLAA215FA04_V4 is 21.5” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit and backlight. By applying 6bits+Hi-FRC digital data, 1920×1080, 16.7M-color images are displayed on the 21.5” diagonal screen. Input power voltage is 5.0V for LCD driving. Converter for backlight is not included in this module. General specification is summarized in the following table: ITEM Display Area(mm) Number of Pixels Pixel Pitch(mm) Color Pixel Arrangement Display Mode Number of Colors Brightness(cd/m^2) Viewing Angle(H/V) Surface Treatment Power consumption(W) Module Size(mm) Module Weight(g) Backlight Unit SPECIFICATION 476.64 (H) × 268.11 (V) (21.53-inch diagonal) 1920 (H) × 1080(V) 0.24825 (H) × 0.24825 (V) RGB vertical stripe Normally white, TN 16.7M(6bits+Hi-FRC) 250cd/m2 (Typ.)(center, 60mA) 170/160 (Typ.) Anti-glare, 3H 17.5W Without Converter(Typ.) 495.6 (W) × 292.2 (H) ×9.85(D) (Typ.) 1830g(Typ.) LED (White-LED)
CPT Confidential
4/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
2. ABSOLUTE MAXIMUM RATINGS
ITEM SYMBOL Power Supply Voltage for LCD VCC
LED Forward voltage LED Forward current VF IF
Operation Temperature Storage Temperature
[Note]
Top Tstg
MIN. 0 2.9 57 0 -20
MAX. 6 3.6 63 50 60
UNIT V V mA ℃ ℃
REMARK
1). 2)
3). 4). 5). 7) 3). 4). 5). 7)
1).Product life-time relate to LED, please operate production follow statement at page 8 〝(2)back light〞. 2).When LED current over the definition of operating current ,product life-time will decay rapidly or operate unusual. 3)The relative temperature and humidity range are as below sketch, 90%RHMax.(Ta≦40℃). 4).The maximum wet bulb temperature ≦39℃(Ta>40℃) and without dewing. 5).If you use the product in an environment which over the definition of temperature and humidity too long to effect the result of eye-etching. 6) Test Condition: IEC 1000-4-2 VESDt: Contact discharge to input connector; VESDC: Contact discharge to module 7). If you operate the product in normal temperature range, the center surface of panel should be under 60℃. Relative humidity(%RH) 90 80 60 40 20 5 Storage Range Operating Range
-20
0
20 40 Temperature (°C)
50
60
CPT Confidential
5/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
3. ELECTRICAL CHARACTERISTICS
(1).TFT-LCD ITEM Power Supply Voltage for LCD Power Supply Current for LCD Permissive Ripple Voltage for Logic Differential Resistance The same motion input Voltage SYMBOL VCC ICC VRP Zm VCM MIN 4.5 --90 1.125 200 -100 TYP 5.0 1050 -100 1.25 350 5 Ta=25℃ MAX UNIT REMARK 5.5 V *1) 1950 mA *2) 100 mVp-p VCC=5.0V 110 ? 1.375 600 100 4 11 V mV mV mV A W *4) *2) *3)
Differential input Voltage |VID| LVDS: IN+,IN- High electric potential threshold VTH voltage Low electric potential threshold VTL voltage LCD Irush Current Power consumption
[Note] *1)Power、data sequence 0.50ms≦t1≦10ms 0.01ms<t2≦50ms 0.01ms<t3≦50ms
Irush P
t4≧1 sec t5≧200ms t6≧200ms
Vin=5.0V
4.5V
LCD Power Supply Logic Signal
4.5V data 0.5V 0.5V
0.5V t1 t2 VL t3
t4
Backlight Power Supply
t5
t6
Data: RGB DATA, DCLK, DENA
CPT Confidential
6/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
VCC-dip conditions: (1) When 3.6V≦Vcc(min)<4.5V: td≦10 ms (2) When Vcc <3.6 V, VCC-dip conditions should also follow the VCC-turn-on conditions.
2). Typical value is measured when displaying horizontal gray scale line pattern:
64 gray level, 1920 line mode VCC=5.0 V,fH= 67.8 kHz,fV=60 Hz,fCLK=72 MHz Maximun value is measured when displaying 2 line pattern: VCC=5.0 V,fH= 66.9 kHz,fV=75 Hz,fCLK=90 MHz *3) LVDS Signal definition
|VID|
VTH VTL
VIN+:Positive differential DATA & CLK Input VIN-: Negative differential DATA & CLK Input
*4).Irush Measurement Condition
CPT Confidential
7/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
(2).Backlight 1. Electrical specification 1-1 single LED
ITEM Forward Voltage Forward Current Power consumption SYMBOL VF IF W Min 2.9 57 TYP 3.25 60 195 Ta=25℃(Ta: ambient temperature) MAX UNIT REMARK 3.6 V IF=60mA 63 mA 1) mW IF =60mA
CPT Confidential
8/26
CLAA215FA04 V4-TCL-20101111

CPT 1-2 CN2
Type Part Number Mating Housing Part Number
CHUNGHWA PICTURES TUBES, LTD.,
CI1406M1HRE-NH(CviLux) or compatible CI1400SL000-NH(CviLux)
CN1:LVDS Pin 1 Pin 30
BACK of MDL
CN2 Pin 1 Pin 6
LIGHTBAR
Pin 1 2 3 4 5 6 2. life time
ITEM LIFE TIME
Name LED_04 LED_03 VLED+ VLED+ LED_02 LED_01
min 30000
Description String 16PcsLED,feedback 60mA String 16PcsLED,feedback 60mA VLED+,4Parallel 16String ; 64Pcs LED VLED+,4Parallel 16String ; 64Pcs LED String 16PcsLED,feedback 60mA String 16PcsLED,feedback 60mA
typ --
max --
UNIT hrs
REMARK 2),3),4),5)
[Note] 1).If dimming function is required, it is strongly recommended to adopt pulse width modulation (PWM).If not, linear decrease of the driving current will affect the optical characteristics 2).Parameter guideline for LED driving is under stable conditions at 25℃ (Room Temperature) and
IF=60mA
3). Definition of the lamp life time: Luminance (L) under 50% of specification. 4). When the ambient temperature Ta overstep 25℃, it will serious damage life time. 5). When the LED operation current IF overstep 60mA, it will serious damage life time.
CPT Confidential
9/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
4. INTERFACE PIN CONNECTION
(1) CN1
Type Part Number Mating Housing Part Number
0930G30-B2001A-M4(STARCONN) / MSCKT2407P30H(STM) or compatible FI-X30HL(JAE) FI-X30H(JAE)
PIN NO. REMARK FUNCTION 1 RXO0minus signal of odd channel 0(LVDS) 2 RXO0+ plus signal of odd channel 0(LVDS) 3 RXO1minus signal of odd channel 1(LVDS) 4 RXO1+ plus signal of odd channel 1(LVDS) 5 RXO2minus signal of odd channel 2(LVDS) 6 RXO2+ plus signal of odd channel 2(LVDS) 7 GND GND 8 RXOCminus signal of odd clock channel (LVDS) 9 RXOC+ plus signal of odd clock channel (LVDS) 10 RXO3minus signal of odd channel 3(LVDS) 11 RXO3+ plus signal of odd channel 3(LVDS) 12 RXE0minus signal of even channel 0(LVDS) 13 RXE0+ plus signal of even channel 0(LVDS) 14 GND GND 15 RXE1minus signal of even channel 1(LVDS) 16 RXE1+ plus signal of even channel 1(LVDS) 17 GND GND 18 RXE2minus signal of even channel 2(LVDS) 19 RXE2+ plus signal of even channel 2(LVDS) 20 RXECminus signal of even clock channel (LVDS) 21 RXEC+ plus signal of even clock channel (LVDS) 22 RXE3minus signal of even channel 3(LVDS) 23 RXE3+ plus signal of even channel 3(LVDS) 24 GND GND 25 NC NC 26 NC Test pin (Can’t connect to GND) 27 NC NC 28 VCC Power supply input voltage(5.0 V) 29 VCC Power supply input voltage(5.0 V) 30 VCC Power supply input voltage(5.0 V) 1) Keep the NC Pin and don’t connect it to GND or other signals. 2) GND Pin must connect to the ground, don’t let it be a vacant pin.
CPT Confidential
10/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
5. INTERFACE TIMING
(1) Timing Characteristic SYMBOL Freq. fCLK DCLK Cycle tCLK Horizontal effective time tHA Horizontal Horizontal blank time tHB LCD Horizontal total time tH Timing DENA Vertical frame Rate Fr Vertical total time tV Vertical Vertical effective time tVA Vertical blank time tVB
[Note] *1) DENA (data enable) usually is positive *2) DCLK still inputs during blanking *3) DE mode only *4) It maybe cause flicker at 50Hz.
ITEM
MIN. 55 18.18 960 40 1000 50 1090 1080 10
TYP. 72 13.89 960 100 1060 60 1130 1080 50
MAX. UNIT 90 MHz 11.11 ns 960 tCLK 160 tCLK 1120 tCLK 75 Hz 1230 tH 1080 tH 150 tH
(2).Timing Chart
a. Horizontal Signal
DCLK
First Data Last Data 1917 1919 Invalid Data
ODD DATA (R,G,B) EVEN DATA (R,G,B)
Invalid Data
1
3
5
Invalid Data
2
4
6
1918 1920
Invalid Data
tHB
tHA
DENA
CPT Confidential
11/26
CLAA215FA04 V4-TCL-20101111

CPT
b. Vertical Signal
CHUNGHWA PICTURES TUBES, LTD.,
LINE DATA
Invalid Data
1
3
3
1079 1080
Invalid Data
tVB
tVA
DENA (3).LVDS Data For 6Bit+Hi-FRC
1CLK
RXOC
RXO3
DE
OB[7]
OB[6]
OG[7]
OG[6]
OR[7]
OR[6]
RXO2
VS
HS
OB[5]
OB[4]
OB[3]
OB[2]
RXO1
OB[1]
OB[0]
OG[5]
OG[4]
OG[3]
OG[2]
OG[1]
RXO0
OG[0]
OR[5]
OR[4]
OR[3]
OR[2]
OR[1]
OR[0]
PREVIOUS 1CLK
DATA for current CLK cycle
NEXT
RXEC EB[7] EB[5] EB[4] EB[3] EB[2] EB[6] EG[7] EG[6] ER[7] ER[6]
RXE3
RXE2
EB[1]
EB[0]
EG[5]
RXE1
EG[4]
EG[3]
EG[2]
EG[1]
RXE0
EG[0]
ER[5]
ER[4]
ER[3]
ER[2]
ER[1]
ER[0]
PREVIOUS
DATA for current CLK cycle
NEXT
CPT Confidential
12/26
CLAA215FA04 V4-TCL-20101111

CPT Color Data Assignment
COLOR INPUT DATA R7 MSB BLACK 0 RED(255) 1 GREEN(255) 0 BASIC BLUE(255) 0 COLOR CYAN 0 MAGENTA 1 YELLOW 1 WHITE 1 RED(0) 0 RED(1) 0 RED(2) 0 RED RED(254) RED(255) GREEN(0) GREEN(1) GREEN(2) GREEN GREEN(254) GREEN(255) BLUE(0) BLUE(1) BLUE(2) BLUE BLUE(254) BLUE(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 1 1 0 0 0 1 1 0 0 0 1 1 0 0 0 R DATA R6 R5 R4 R3 R2 R1 R0 LSB 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1 0 G7 MSB 0 0 1 0 1 0 1 1 0 0 0
CHUNGHWA PICTURES TUBES, LTD.,
G DATA G6 G5 G4 G3 G2 G1 G0 LSB 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
B7 MSB 0 0 0 1 1 1 0 1 0 0 0
B DATA B6 B5 B4 B3 B2 B1 B0 LSB 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 1 0 0 0
1 1 0 0 0
1 1 0 0 0
1 1 0 0 0
1 1 0 0 0
1 1 0 0 0
0 1 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 1
0 0 0 1 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
1 1 0 0 0
1 1 0 0 0
1 1 0 0 0
1 1 0 0 0
0 1 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 1
0 0 0 1 0
0 0
0 0
0 0
0 0
0 0
1 1
1 1
1 1
1 1
1 1
1 1
1 1
0 1
[Note]
1) Definition of gray scale: Color (n): n indicates gray scale level; higher n means brighter level. 2) Data: 1-High, 0-Low.
3)For odd & even data also. (4).Color Data Distribution D(1,1) D(2,1) .. D(1,2) D(2,2) .. .. .. + D(1,Y) D(2,Y) .. .. .. + D(1,1079) D(2, 1079) .. D(1, 1080) D(2, 1080) ..
D(X,1) D(X,2) .. D(X,Y) .. D(X, 1079) D(X, 1080)
.. .. + .. + .. ..
D(1919,1) D(1920,1) D(1919,2) D(1920,2) .. .. D(1919,Y) D(1920,Y) .. .. D(1919, 1079) D(1920, 1079) D(1919, 1080) D(1920,1080)
CPT Confidential
13/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
6. BLOCK DIAGRAM
TFT-LCD Module
Light bar Unit in Backlight
6 Pin Connector
CN1 I/F Connector
LVDS receiver 2ch Timing Controller
Source Driver
Gate Driver
LCD Panel 1920 X 3 X 1080
Power Supply Circuit
CPT Confidential
14/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
7. MECHANICAL SPECIFICATION
(1) Front side (Tolerance is ± 0.5mm unless noted) [Unit: mm]
(2) Rear side (Tolerance is ±0.5mm unless noted)
[Unit: mm]
CPT Confidential
15/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
CPT Confidential
16/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
8. OPTICAL CHARACTERISTICS
ITEM Contrast (CEN) Luminance (CEN) 9P Uniformity Response Time Cross talk Horizontal View angle Vertical Horizontal Vertical White Color Coordinates Red Green Blue Gamut Gamma SYMBOL CONDITION θ=ψ﹦0° CR L ΔL Tr+Tf CT ψ θ ψ θ x y x y x y x y CG γ θ=ψ﹦0° θ=ψ﹦0° θ=ψ﹦0° θ=ψ﹦0° CR≧10 MIN. 800 200 75 --75/-75 70/-70 75/-75 75/-75 0.263 0.279 (0.593) (0.303) (0.279) (0.579) (0.104) (0.007) 67 2.0 TYP. 1000 250 -5 -85/-85 80/-80 85/-85 85/-85 0.313 0.329 (0.643) (0.353) (0.329) (0.629) (0.154) (0.057) 72 2.2 Ta=25℃,VCC=5.0V MAX. UNIT REMARK ---8 1 -----cd/m2 % ms % Deg. Deg. Deg. Deg. *4) *1) 2) *1) 3) *1) 3) *5) *6)
CR≧5
θ=ψ﹦0°
θ=ψ﹦0° VESA
0.363 0.379 (0.693) Color (0.403) Coordin (0.379) ates (0.679) (0.204) (0.107) -% 2.4 --
*3)
*7)
[Note] Definition of these measurement items is as follows: 1) Setup of Measurement Equipment The LCD module should be turn-on to a stable luminance level to be reached. The measurement should be executed after lighting Backlight for 20 minutes and in a dark room.
CPT Confidential
17/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
2) Definition of Contrast Ratio CR=ON (White) Luminance/OFF (Black) Luminance 3) Definition of Luminance and Luminance uniformity Central luminance: The white luminance is measured at the center position “5” on the screen, see Fig.1 below. And the measure time is 30 min after discharged. 9P Luminance (AVG): The white luminance is measured at measuring points 1 to 9, see Fig.1 below. 9P Uniformity: Δ L = (LMIN /LMAX) ×100%
540
960
(1920,1080)
4).Definition of Viewing Angle (θ,ψ):
θ Upper(+)
φ
Left(-)
Right(+)
Lower(-)
CPT Confidential
18/26
CLAA215FA04 V4-TCL-20101111

CPT 5) Definition of Response Time: White 90 % Luminan 10 % Tr Black
CHUNGHWA PICTURES TUBES, LTD.,
90 %
10 %
Tf
6) Definition of crosstalk: CT=∣YB-YA∣/YA X 100 (%) YA : The luminance of measured position at pattern A YB : The luminance of measured position at pattern B with Gray level 0 Pattern A Pattern B
7) Definition of Gamma (γ), follow VESA standard sampling every 16 gray level (0,16,32,…..224,240,255) T 輝 % 度
差 L O
y =γx-k
Gray level (LOG)
階調LOG
CPT Confidential
19/26
CLAA215FA04 V4-TCL-20101111

CPT
CHUNGHWA PICTURES TUBES, LTD.,
9. RELIABILITY TEST CONDITIONS
(1) Temperature and Humidity TEST ITEMS HIGH TEMPERATURE HIGH HUMIDITY OPERATION HIGH TEMPERATURE HIGH HUMIDITY STORAGE HIGH TEMPERATURE OPERATION HIGH TEMPERATURE STORAGE LOW TEMPERATURE OPERATION LOW TEMPERATURE STORAGE THERMAL SHOCK (2) Shock & Vibration ITEMS CONDITIONS 50℃; 90%RH; 240h (No condensation) 60℃; 90%RH; 48h (No condensation) 50℃; 240h 60℃; 240h 0℃; 240h -20℃; 240h BETWEEN -20℃(1hr)AND 60℃(1hr); 100 CYCLES
CONDITIONS Shock level:980m/s^2(150G) SHOCK Waveform: half sinusoidal wave, 2ms (NON-OPERATIO Number of shocks: one shock input in each direction of three N) mutually perpendicular axes for a total of six shock inputs Vibration level: 9.8m/s^2(1.0G) zero to peak Waveform: sinusoidal VIBRATION Frequency range: 5 to 500 Hz (NON-OPERATIO Frequency sweep rate: 0.5 octave/min N) Duration: one sweep from 5 to 500Hz in each of three mutually perpendicular axis(each x,y,z axis: 1 hour, total 3 hours) (3) ESD POSITION CONDITION( MDL turn off) Connector Module 1. 200 pF,0 ?,±250 V 2. contact mode for each pin 1. 150 pF,330 ?,±15K V 2. Air mode, test 25 times for each test point 3. Contact mode, 25 times for each test point CONDITION 260HPa (30000 ft.);24 Hr
(4) Low Pressure test TEST ITEM Low Pressure test(storage)
(5) Judgment standard The judgment of the above test should be made as follow: Pass: Normal display image with no obvious non-uniformity and no line defect. Partial transformation of the module parts should be ignored. Fail: No display image, obvious non-uniformity, or line defects.
CPT Confidential
20/26
CLAA215FA04 V4-TCL-20101111

相关文档