I.P.
MULTI CHANNEL DATA ACQUISITION SYSTEM MOD. DSlab
DSLab is a multi-channel data acquisition system including transducers that measure
(forces, displacements, temperatures, etc.) and transmitting analog signals to the SAP
digitizing electronics that retransmits, the measured values, by means of CAN Open, to a
CAN/USB converter connected to the computer USB, where DSLab software is installed.
DSLab data acquisition software shows, at the same time, all wave forms of each
input channel on the computer screen where it is possible a data analysis,
to save data on hard disk and to print graphs.
?Graph: “Strip Chart” type (Y = measured values, X = time), with engineering units.
?Input channels: up to 8pcs max. input channels on each SAP electronics with high
resolution (24bit max. A/D converter).
?Measure of fast signal changes: up to 1KHz max. sampling rate on each channel.
?Data saving: on computer hard disk with text TXT file
?Applications: laboratory measures, automation, quality control, process control,
leakage tests, testing machines, weighing, CAN bus data acquisition etc.L O A D C E L L S
LOAD CELLS AND PRESSURE TRANSDUCERS WITH INTERNAL ELECTRONICS 546 QD
546 QDT 535 QD 514 QD
from 2 Kg to 2 tons fs 500 QD Series Withstanding billions of cycles
Insensitive to the load position CANopen - Modbus - DSEnet
LP668-2-D42LP668-4-D40AP 7025LP668-4-D20
546 QDT
535 QD
LD10LD5
Measuring ranges (tension and compression):
514 QD:0 ÷2- 3 Kg.;535 QD:0 ÷6 - 12 - 25 Kg.
546 QD:0 ÷60-110 Kg.;546 QDT:0 ÷220 - 330 - 550 Kg.
1000 - 2000 Kg.
Technical features:
off centre load cells with on axis clampings.
Non linearity:<±0,023%FS for mod. 514QD and 535QD
<±0,046%FS for mod. 546QD and 546QDT.
Flexion parallelogram: insensitive to load position.
Options:internal analog electronics (±5V, ±10V, 4-20mA).
internal digital electronics (CANopen, RS485, RS422).Applications:The high accuracy, compactness and ruggedness allow series 500QD to be used for: general applications, automation, weighing systems, medical machines, plastic injection molding machines,general testing machines, textile machines, marble machines,on vehicles, machine tools, presses, research etc.
T E N S I O M E T E R S F O R W E B S : R A D I A L L O A D C E L L S
from 5 Kg. to 1500 Kg. fs LCR 200 Series 240220215
Measuring ranges:
LCR 215: 0 to ±5 - 10 - 20 - 50 - 80 Kg.
LCR 220: 0 to ±100 - 200 - 350 Kg.
LCR 240: 0 to ±500 - 1000 - 1500 Kg.
Main specifications:Axial through hole: for the endshaft of the roller.
Thin thickness: for extending the installation possibilities on
new machines and on retrofits.
Possibility of rotation of the central measuring body: for an
accurate alignment of the measuring axis.
Very effective protection of the rolling bearings against dust.
All axes overload protections.
Outputs:2 mV/V , ±5 V , ±10 V , 4-20 mA, RS485, RS422, CAN open.
Main applications:to be installed on measuring rollers; on textile
machines, in paper, plastic, metal foil, in printing machines,
to control the radial force of webs.ANALOG ELECTRONICS (CE mark)Voltage output:0 to ±5 V; 0 to ±10 V .Current output: 4 to 20 mA.Advantages:protection against electrical noise, high resolution,compactness and good price (it is not necessary to install and calibrate an expensive and bulky external electronic box),pre cablibrated, quick electrical connections, easy installation.DIGITAL ELECTRONICS (CE mark)
Outputs:RS485 and RS422 (Modbus; DSEnet)
CAN (CANopen DS406; DEVICENET).
Advantages:High resolution (24bit max. A/D converter), protection
against electrical noise, high sampling rage (960H z max.),
digital filter, compactness and good price, pre calibrated, easy
cabling (it is possible to parallel many transducers to a single PLC
digital input), alarm levels, easy service (overload memory).
L O A D C E L L S
(only some standard series)
2005200120155060
5025
5015
5005302303304301305LD-LT Series from 10 Kg. to 500 tons fs Measuring ranges:Series LD for compression:Mod. LD 1: 0 ÷10 – 20 – 50 – 100 – 200 – 500 Kg. Mod. LD 5: 0 ÷1 - 2 - 5 tons.;Mod. LD 10: 0 ÷5 – 10 tons.
Mod. LD 100: 0 ÷20 - 50 - 100 tons.;Mod. LD 300: 0 ÷300 – (500) tons.
Series LT: for tension and compression:
Mod. LT 05: 0 ÷±10-20-50-100-200 Kg.;Mod. LT 1:0 ÷±200-500-1000 Kg.;
Mod. LT 5: 0 ÷±2 - 3 tons.Mod. LT 50: 0 ÷±5 - 10 - 30 tons.
Main specifications: Round and thin pancake load cells:
Total error: < ±0,2 % fs; Low price; H ermetically sealed; N°of strain gauges
increasing from 4 to 12 with the diameter: for a better insensitivity to the transversal
loads; Internal calibrator; Final test certificate; Options: internal analog
( 5V , 10V , 4-20mA ) or digital (CANopen, RS485, RS422 ) electronics.Main applications:
for general purpose; for machine tools, for actuators, for weighing systems.
HC 2000 Series from 50 Kg. to 100 tons fs MD 5000 Series from 1 to 60 tons fs AP 7000 Series from 250 Kg. to 100 tons fs BC 300 Series from 3 Kg. to 2 tons fs Measuring ranges:
HC 2001: 0 ÷
50 - 100 - 200 - 300 Kg. (Al).HC 2002: 0 ÷2ton.HC 2001: 0 ÷
500 - 1000 Kg. (Fe). HC 2015: 0 ÷10 - 15ton.HC 2005: 0 ÷
5ton.HC 7050: 0 ÷50ton.HC 2030: 0 ÷30ton.HC 7100: 0 ÷100ton.
Main specifications:
washer load cells:
flat, with large central hole. Internal calibration. Final test certificate.
Main applications:
for general purpose, for automatic control of axial thrusts: on punching
machines; on machine tools, presses, power hammers, actuators.
Measuring ranges:
MD 5005: 0 to 1 - 3 - 5 tons.
MD 5015: 0 to 10 - 15 tons.MD 5025: 0 to 25 tons.MD 5060: 0 to 40 - 60 tons.
Main specifications:Pin load cells:Body of the pin: in solid rod (no tube).Sensors: on all the diaphragms of the 4 cavities.Extreme sturdiness: for use also outdoor and in industrial environmen-tal conditions.
Each model supplied with 2 lengths: standard or as long as requested.
Options: internal analog or digital electronics.
Main applications:for industrial machines, in substitution of pins: of wheels, of
pulleys, of cranes, of hydraulic actuators, for the measure of fix or
of mobile reservoirs.
Measuring ranges:
Tension and compression:0 ÷250 - 500 Kg
0 ÷1 - 3 - 5 - 10 - 25 - 50 - 100 tons.
Main specifications:column load cells:
For tension and compression. Rugged load cells for high loads.
For applications in industrial environments and outdoor.
Options: built-in analog elctronics ( 5V, 10V, 4-20mA )
or digital ( RS485, RS422 with Modbus or DSEnet protocols or CANOpen ).
Main applications:
General use, weighing, automation, cranes, machine tools, test machines,
vehicles, general use.
Measuring ranges:
Compression:
BC 302: 0 to 3 - 6 - 12 - 20 - 30 - 60 - 100 Kg.
BC 303: 0 to 150 - 350 - 500 Kg.
BC 304: 0 to 500 - 1000 - 2000 Kg.
Tension and compression:
BC 301: 0 to 3 - 6 - 12 - 20 - 30 - 60 - 100 - 150 Kg.
BC 305: 0 to 500 - 1000 - 1500 Kg.
Main specifications:button load cells:
miniaturized, ultraflat, price convenient.
Main applications:for general purposes, for industrial and medical
weighing platforms, textile machines, vehicle tests benches.
ALD LD ALD
LD LT
C O L U M N L O A
D C
E L L S
Series 560QDT From 300Kg to 4000Kg fs Serie KCI 2500 - 6800 Kg. fs
BEAM LOAD CELLS
Measuring ranges:
0 ÷100 - 200 – 500 Kg
Main specifications:
Rugged, convenient and accurate load cells.
Non linearity: < ±0,05 % FS; Environment protection: IP65;
CE marked; Connection: cable and connectors.
Outputs: 2 mV/V tip.; 5 V; 10 V; 4 -20 mA.
CAN open; RS485 Modbus.
Main applications:
general use, automation, textile machine, weighing, machine tools,
testing machines, presses, vehicles, food machines, converting machines etc.
S – TYPE LOAD CELL
Measuring ranges:
Tension and compression 0 ÷±350 - 400 - 500 - 1000 - 2000 – 3000 - 4000 Kg
Main specifications:
S – type load cells with coaxial fixing threaded holes.
Rugged, convenient and accurate load cells.
Non linearity: <±0,05 % FS; environment protection: IP65;
zinc plated high strength steel; Connection: cable or connector.
Outputs: 2 mV/V typ.; 5V; 10 V; 4 –20 mA.
Main applications:
general use, automation, textile machine, weighing, machine tools, testing machines,
presses, vehicles, food machines, converting machines etc.
Series EG OFF-CENTRE LOAD CELLS
Measuring ranges:
0 ÷3-6-12-25Kg ( additional measuring ranges available under request ).
Main specifications:
Off-centre load cell for scale pans up to 400x400mm.
Non linearity: < ±0,03 % FS; CE marked;
Connection: cable; Aluminum metal frame.
Outputs: 2 mV/V tip.; 5 V; 10 V; 4 -20 mA.
CAN open; RS485 Modbus.
Main applications:
general use, automation, textile machine, weighing, machine tools,
testing machines, presses, vehicles, food machines, converting machines etc.
400x400mm scale pan Series PT500from 100 to 500Kg fs MP MB 491
MB 491-P SERIES MB490 BEAM LOAD CELLS:
Measuring ranges:
Mod.MB4910 ÷300-400-500-600-700Kg (compression).
Mod.MB491-P 0 ÷±300-400-500-600-700Kg (tension and compression).
Main specifications:
Beam load cells with low price and compactness.
Main applications:
For general purpose, automation, machine tools, weighing,
medical machines, vehicles.
SERIES MP WASHER LOAD CELLS.
Measuring ranges:0 ÷500-1000-1500-2000-2500Kg.
Main specifications:
Flat with central hole and connector.
Outputs:2 mV/V, 5 V, 10 V, 4-20 mA.
Main applications:
To be applied onto actuators or tie rods for force measurements and for
general use.L O W C O S T L O A D C E L L S
SERIES KCI BEAM LOAD CELLS
Measuring ranges:
0 to 2500-6800Kg FS (compression).
Main specifications:
Sensitivity: 2mV/V typical.
Non linearity: < ±0,2% FS.
Internal calibration circuit.
Fit for industrial applications, IP65 environment protection.
Main applications:
Industrial weighing (tanks, silos, hoppers), load control systems (cranes,
winches, lifting equipment), automation, machine tools, on vehicles, for
research etc.
Fig. A Fig. B Fig. C
S M A R T A N K = L E V E L I N T O T A N K S
Liquid level measuring system with float and tank shape linearization.
Measuring strokes:from 100 mm to 3 meters ( as for PC series ).
Units of the system:PC probe, one or two AFC-2S floats,
MLPS electronic box, Fastset software.
MPLS electronics: 5 digits LED display, LED warning
messages, switching from “mm” to “liters”, 2 level alarms.
Mains: 220 Vac or 24 Vdc.
Fastset software:on a 3 1/2disk. Easy to use,
RS232 computer connection, Windows. Linearization table
(fig. C) up to 1000 points: to adapt to any tank shape.
Level visualisation (fig. A). Probe calibration (fig. B).
Wave filtering. Resolution: 0,2 mm.
Non-linearity: 0,025% fs (on mm measures).
Option: RS485 output.
Applications:
for food applications compatible with stainless steel
Aisi 316L. On fix or mobile tanks, for milk, wine, oil, basins,
rivers and for all the not-explosive fluids and areas. CE mark.MLPS FASTSET AFC-2S
PCS
699942LOAD CONTROL SYSTEMS FOR: ELEVATORS - MACHINES - VEHICLES
DIGITAL LIFTSENTRY: for elevator cars and beams ? machines and vehicles force measures
Mod. 942:sensor measures the load applied on a steel frame by measuring the proportional
flexion strain.
Mod. 699: digital electronics easy to install, with 4 digits LEDs display, with relays alarm levels,
auto zeroing function, towed chain and relays block functions (for elevator applications).
Applications: load weighting device for new and modernized elevator cars and beams,
for parking systems, cranes, machine tools, load control on vehicles (fork lifts, aerial
platforms, trucks, agriculture machines etc.), tank weighing etc.
MR OT ROPE LIFTSENTRY: load weighing device for traction elevators and lifting equipment
OT sensor installed on each single rope for measuring the applied load proportional to the rope tension.
Easy and quick to install (without tools), compact, pre-calibrated, installed also on belts and can be
field adapted to ropes with different diameters (option).
Applications: load weighing device for new and modernized traction elevators, tension control on
civil engineering structures, theater machines, tie rod tension control on radar and antennae,
tension control on boat lines etc.
MULTIROPE: load weighing device for traction elevators and lifting equipment
MR sensor is installed on all the ropes at the same time for measuring the applied load by measuring
the proportional rope tensions.
Easy and quick to install, compact, installed also on belts and can be field adapted to ropes with different
diameters (option).
Applications:load weighing device for new and modernized traction elevators, tension control on civil engineering structures, theater machines, tier rod tension control on radar and antennae, tension control
on boat lines etc.
S E R I E S A N 601 P O R TA B L E I N S T R U M E N T
Series AN601Main specifications:
Portable handheld instrument with batteries, compact, 5 digits
hi-brightness red LEDs display, with lid for battery housing,
one input channel with connector for analog signals: ±80mV ,
±5V , ±10V , 4-20mA, it feeds power supply to connected
transducers, 9pcs push buttons for easy and quick parameter
setting, functions: zeroing-hold-peak memory.
Applications:calibration control of transducers in production
machines, weighing systems, automation, medical machines,
metrology, on presses, civil engineering and geophysical tests,
on vehicles etc.
Can be connected to many transducer types: load cells,
dynamometers, weighing systems, temperature probes,
liquid level measuring systems, pressure transducers,
inclinometers, accelerometers etc.
Pitagora AN 401 Plus P A N E L M E T E R S – S I G N A L C O N D I T I O N E R S DATA ACQUISITION AND CONVERTING ELECTRONICS MOD. SAP
SAP
658SAP-Pitagora is a digital electronics that can be connected to transducers for digitizing their analog electrical signals and then It digitally transmits the measured data to a computer, PLC or data acquisition system.?High resolution:24bit max. A/D converter.?Slow and fast sampling rates:up to 3,8KHz max.?Analog inputs up to 8pcs max.:±80mV , ±5V , ±10V , 4-20mA.?Outputs:analog up to 4pcs max. 5V , 10V , 4-20mA (with D/A 16 bit max.) and 16pcs max.alarm levels.?Digital outputs:RS485, RS422, RS232 (Modbus and DSEnet), CAN Open (DS406).?Main functions:zeroing, filtering, positive/negative peaks memorization,digital transmission and 10 point linearization.?Option:software DSLab for data acquisition with graph measure/time, data saving on hard disk and printing.?Applications:for industrial applications, data acquisition, laboratory, weighing,
automation, machine tools, medical machines, textile machines, vehicles etc.
DIGITAL CONVERTER MOD. 658
Mod. 658 is connected to a computer for converting RS485 and RS422 digital
transmissions into RS232.
It allows an easy connection between the data acquisition system togheter with a
computer.
Mod. 658 is powered by digital line and do not need external power supply source.SERIES EL600 ANALOG SIGNAL CONDITIONING CARDS
Conditioning cards for analog signals from strain gauge transducers (load cells,
pressure transducers, torque meters, strain gauges etc.) and LVDT position
transducers.
EL600 cards feed power supply to the connected transducer and give an amplified
output proportional to the measured value.
Easy to calibrate: with zero and gain trimmers and with built-in calibration circuit
without known load (only for DS Europe strain gauge transducers).
EL600 can be provided with 3 versions: card with 4 fixing holes, on DIN rail and
inside a box with cable glands.
CE / EMC certified against electromagnetic noise (also for industrial applications).
Easy cabling with extractable screw terminal boards.
EL621-EL631
Strain gauge signal amplifier.Outputs: EL621=±10V; EL631=+10V .EL624-EL634
Strain gauge signal amplifier.Outputs: EL624= 4-20mA (2 wires); EL634=4-20mA (3 and 4 wires).EL625-EL635
Strain gauge signal amplifier.Outputs: EL625= ±5V; EL635=+5V .EL626
Strain gauge signal amplifier. Output: 100Hz to 1MHz frequency.EL646
Signal conditioner for LVDT position transducer.Output: ±5V; ±10V .EL674Summing card for up to 6pcs load cells.Outputs: ±5V , ±10V , 4-20mA (3 and 4 wires), 100Hz to 1MHz frequency.
P R O F I B U S
PANEL METER MOD. PITAGORA:Panel meter display with microprocessor, easy to use, compact and convenient.
The PROFIBUS digital data transmission allows to transmit, in an easy and convenient
way, up to 8pcs analog signals of connected transducers to a SIEMENS PLC.
Main specifications:high background brightness LCD display with 7 digits
(±9999999) and alphanumeric line (= easy to use), shows the measures of connected
transducers in engineering units, with 4 slots for built-in optional input/output cards,
with 24bit A/D converter (= high resolution) and It can be connected to all DS Europe
transducers.
Main functions: gross, nett, tare, piece counting, positive or negative peak memory,
hold, digital filtering, sum of up to 8 transducers signals.
Up to 8pcs max. input channels: ±80mV , ±5V , ±10V , 4-20mA 2 and 3 wires.
Outputs: PROFIBUS, CAN Open, RS485, RS422, RS232, 5V , 10V , 4-20mA.
Alarm levels: up to 8pcs with relays or optically insulated contacts.
Applications:high accuracy load cell sum for weighing systems, connection of analog
transducers for SIEMENS PLCs, control of necessary force for blocking a pin
inserted into an hole, baricenter control of boats and airplanes, automation, on
vehicles, research, machine tools, textile machines, marble machines, plastic
machines, glass etc.
PANEL METER MOD. AN401PLUS:
AN401Plus is like PITAGORA but with a 5 digits red LEDs display (±99999) with high
brightness fit for low environment luminosity applications.
Specifications and prices may change without notice.Bulletin:050207-E
DEVELOPMENT AND MANUFACTURING OF CUSTOM PRODUCTS
DS Europe technical department, with 30 years experience, can develop products accordingly to
customers’ technical specifications with the following tools:
?3D mechanical design CAD software stations.
?Finite Element Analisys FEA software stations.
?Digital and analog electronic development accordingly to EMC (= CE) stricter industrial
marking regulations (with tests in anecoic room at Competent Body third party laboratory).
?Software and embedded firmware development accordingly to most popular industrial bus
systems (CANopen, Modbus, PROFIBUS etc.)
?Fast prototyping.
DS Europe develops new products or modifies existing ones in order to realize the fittest and more
convinient product.
POSITION TRANSDUCERS AND MEASURING SYSTEMS
SP AN401 Plus PCR PCS
PCP Strokes from 100 mm to 3 meters PC Series Measuring strokes:±2,5; ±5; ±12,5; ±25; ±50; ±100 mm.Non linearity: < ±0,2 % fs.Resolution: infinite.
Main specifications:
?no mechanical contact between fix and movable parts: no frictions, no wears.
?external surfaces and side boards: in stainless steel.
?central tube for the sliding core: in stainless steel.
?extremely robust and environment protected.
?high number of coil turns: to warranty a linear signal without jumps.PC SER IES: MAGNETOSTR ICTIVE; one or two cursors or floats.
Measures of: position; velocity; level.
Measuring strokes:from 100to 1000 mm.: intervals of 50 mm.
from 1000 to 3000 mm: intervals of 100 mm.
PCR:displacement rule.
PCS:standard with screwed electronic head.
PCP:with probe extraction from the well , screwed to the reservoir.
PCM:with miniaturised measuring probe.
Main specifications: no electrical contact between fix probe and cursor or
float: no frictions, no wears. Operating probe pressure: 350 bars (700 max.).
Digital technology. Outputs: 0÷10V , 4-20mA, RS485, CAN open, Start Stop, SSI.Applications:for oil and air actuators and pistons, on operating machines, for level measures on reservoirs (see also Smartank)
AN 401EL 546
SP Series LVDT
Strokes: ±2,5 ÷±100 mm SERVOINCLINOMETERS – SERVOACCELEROMETERS – MEASURING SYSTEMS Serie ES261Measuring ranges:inclination: ±(5,75°) ; 14,5°; 30°; 45°; 90°degrees.
acceleration : ±(100) ; 250 ; 500 ; 700 ; 1000 millig.
With electronics inside: supply: ±15 V; Output: ±5 V (±10 V).
Main specifications:measuring ranges extended to low values down to one
millionth of the full scale. Linearity: ±0,05% fs. Bandwidth: from
gravity (zero) to 55 Hz. High repeatability, resolution, sturdiness.
Indicator – conditioner AN 401:5 full digits with direct reading in sessagesimal
degrees. 4 alarm levels. With microprocessor.
Shock absorber box ES 291:on x-y-z- axes. Up to 2 units ES261 for x-y axes.
down to microns/meter (very convenient prices)SERIES LP660 PRESSURE TRANSDUCERS
LP664Current amplif.
Digital 2Output: RS485 and RS422 (DSEnet, Modbus)Output: CAN (CANopen DSP406, DEVICENET)
0 to 8 up to 36 Vdc 4 ÷20 mA LP668
LP669Model
LP665
Voltage amplifiers
30 to 12 up to 36 Vdc 0 ÷5 V LP661Internal electr.N. of wires Power supply Output 0 ÷10 V LP 668-4LP 665-2LP 664-4LP 661-2Pressure transducer series LP 660: with ceramic sensor, rugged, with hammershock protection, with zero regulation and good price.
Measuring ranges:0 ÷1 - 2 - 5 - 10 - 20 - 50 - 100 - 200 - 400 - 600 bar.
(LP 650 Series, measuring ranges: up to 1400 bars).
Hydraulic connections:G 1/4” or G 1/2”.
Electrical connection:by connector (central hole for zero regulation).