(ANSI: FR-4) Halogen-Free
(ANSI: FR-4) Tetra-Functional
DS-7409S(F)
(ANSI: FR-4) High Tg, Excellent Thermal Reliability
DS-7409D
(ANSI: FR-4) Low Dk & Low Df Laminate
DS-7408(LT) / DS-7408(LTF) (ANSI: FR-4) Lead Free Soldering Compatible
DS-7402H
(ANSI: FR-4) High Tg, Halogen Free
DSF-400 / DSF-400G / DSF-500 Build-up Board Material
DS-7409
(ANSI: FR-4) High Tg, Multi-functional
Features
?High Tg Glass Transition Tempeature
?Lower Permittivity(Dk) than conventional FR-4?Good Adhesion of Copper Foil and Inner Layers Application
?High-Layer Count Backplanes
?High Density Interconnects
?Suitable for Fine Line Multi-Layers
170
165
41
3.3
295
7
-
4.2
0.015
2.0
0.12
DS-7409S(N)
(ANSI: FR-4) Excellent Heat Resistance
(N)
DS-7405 / DS-7405(UV) / DS-7405S (ANSI: FR-4) High Tg, Multi-functional
DS-7106(HC) / DS-7209(HC) / DS-7408(HC) / DS-7409(HC) Copper Foil Thickness 400?
Designation
DS-1107
ANSI Grade
FR-1
Test Item
Unit
Test Condition
Property Data
Standard Value Guaranteed Value Flammability
-UL-94
avg : 3.5 max : 8.0avg : 5.0 max : 10.0Insulation Resistance ohm C-96/20/65 C-96/20/65+D-2/100 5 x 1011 -5x 1012 5 x 10 7 - 5 x 10 8above 1 x 10 9 above 1 x 10 7Volume Resistivity
ohm-cm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1013 -1x 1014 5 x 1012 -5x 1013above 5 x 1010 above 5 x 10 9Surface Resistance
Adhesive Surface ohm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1012 -5x 1012 1 x 1011 -5x 1011above 1 x 1010 above 5 x 10 9Laminate Surface
ohm C-96/20/65
C-96/20/65+C-96/40/90 5 x 1011 -5x 1012 5 x 10 9 -1 x 1010
above 1 x 10 9 above 5 x 10 8Dielectric Constant
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50 4.5 - 5.05.0 - 5.5less than 5.5less than 6.0Dissipation Factor
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50
0.020 - 0.0300.025 - 0.035less than 0.050less than 0.060Solder Float (260℃)sec A 30 - 40above 15Peel Strength
Cu.foil 1 oz (0.035mm)
kg f/cm A S 1.8 - 2.31.8 - 2.3above 1.42above 1.42Flexural Strength (LW)
(CW)kgf/mm 2
A
15 - 1813 - 16above 8.16above 8.16Water Absorption %
E-24/50+D-24/230.8 - 1.0
less than 1.5
Trichloroethylene Resistance -Immersion in boiling Trichloroethylene (For 2 Minutes)
No abnormality No abnormality
General Properties
Designation
DS-1107A
ANSI Grade
FR-1
Test Item
Unit
Test Condition
Property Data
Standard Value Guaranteed Value Flammability
-UL-94
avg : 3.0 max : 8.0avg : 5.0 max : 10.0Insulation Resistance ohm C-96/20/65 C-96/20/65+D-2/100 5 x 1011 -5x 1012 3 x 10 8 - 8 x 10 8above 1 x 10 9 above 1 x 10 8Volume Resistivity
ohm-cm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1013 -1x 1014 5 x 1012 -5x 1013above 5 x 1010 above 5 x 10 9Surface Resistance
Adhesive Surface ohm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1012 -5x 1012 1 x 1011 -5x 1011above 1 x 1010 above 5 x 10 9Laminate Surface
ohm C-96/20/65
C-96/20/65+C-96/40/90 5 x 1011 -5x 1012 5 x 10 9 -1 x 1010
above 1 x 10 9 above 5 x 10 8Dielectric Constant
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50 4.0 - 5.04.5 - 5.5less than 5.5less than 6.0Dissipation Factor
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50
0.020 - 0.0300.025 - 0.035
less than 0.050less than 0.060Comparative Tracking Index
volt IEC Method
600above 600Solder Float (260℃)sec A 35 - 40above 15Peel Strength
Cu.foil 1 oz (0.035mm)
kg f/cm A S 1.8 - 2.31.8 - 2.3above 1.42above 1.42Flexural Strength (LW)
(CW)kgf/mm 2
A
15 - 1813 - 16above 8.16above 8.16Water Absorption %
E-24/50+D-24/230.7 - 0.9
less than 1.2
Trichloroethylene Resistance -Immersion in boiling Trichloroethylene (For 2 Minutes)
No abnormality No abnormality
General Properties
Designation
DS-1107 (S)
ANSI Grade
FR-1
Test Item
Unit
Test Condition
Property Data
Standard Value Guaranteed Value Flammability
-UL-94
avg : 3.0 max : 8.0avg : 5.0 max : 10.0Insulation Resistance ohm C-96/20/65 C-96/20/65+D-2/100 1 x 1012 -1x 1013 5 x 10 10 -5x 1011above 1 x 10 9 above 1 x 10 8Volume Resistivity
ohm-cm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1013 -1x 1014 1 x 1013 -1x 1014above 5 x 1010 above 5 x 10 9Surface Resistance
Adhesive Surface ohm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1012 -1x 10131 x 1011 -5x 1011above 1 x 1010 above 5 x 10 9Laminate Surface
ohm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1012 -1x 1013 5 x 1010 -5x 1011
above 1 x 10 9 above 1 x 10 8Dielectric Constant
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50 4.0 - 5.04.2 - 5.2less than 5.5less than 6.0Dissipation Factor
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50
0.020 - 0.0300.025 - 0.035less than 0.050less than 0.060Solder Float (260℃)sec A 40 - 50above 15Peel Strength
Cu.foil 1 oz (0.035mm)
kg f/cm A S 1.8 - 2.21.8 - 2.2above 1.42above 1.42Flexural Strength (LW)
(CW)kgf/mm 2
A
15 - 1814 - 17above 8.16above 8.16Water Absorption %
E-24/50+D-24/230.5 - 0.7
less than 1.2
Trichloroethylene -Immersion in boiling Trichloroethylene No abnormality No abnormality
General Properties
Designation
DS-1108
ANSI Grade
FR-1
Test Item Unit Test Condition
Property Data
Standard Value Guaranteed Value Flammability
-UL-94
avg : 3.0 max : 8.0avg : 5.0 max : 10.0Insulation Resistance ohm C-96/20/65 C-96/20/65+D-2/100 5 x 1011 -5x 1012 1 x 10 8 - 5 x 10 8above 1 x 10 9 above 1 x 10 7Volume Resistivity
ohm-cm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1013 -1x 1014 5 x 1012 -5x 1013above 5 x 1010 above 5 x 10 9Surface Resistance
Adhesive Surface ohm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1012 -5x 1012 1 x 1011 -5x 1011above 1 x 1010 above 5 x 10 9Laminate Surface
ohm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1011 -1x 1012 5 x 10 9 -1 x 1010
above 1 x 10 9 above 1 x 10 8Dielectric Constant
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50 4.0 - 5.04.5 - 5.5less than 5.5less than 6.0Dissipation Factor
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50
0.020 - 0.0300.025 - 0.035
less than 0.050less than 0.060Comparative Tracking Index
volt IEC Method
600above 600Solder Float (260℃)sec A 30 - 40above 15Peel Strength
Cu.foil 1 oz (0.035mm)
kg f/cm A S 1.8 - 2.31.8 - 2.3above 1.42above 1.42Flexural Strength (LW)
(CW)kgf/mm 2
A
15 - 1813 - 16above 8.16above 8.16Water Absorption %E-24/50+D-24/230.8 – 1.0less than 1.5Trichloroethylene Resistance
-Immersion in boiling Trichloroethylene (For 2 Minutes)
No abnormality
No abnormality
General Properties
Designation
DS-1108 (S)
ANSI Grade
FR-1
Test Item
Unit
Test Condition
Property Data
Standard Value Guaranteed Value Flammability
-UL-94
avg : 3.0 max : 8.0avg : 5.0 max : 10.0Insulation Resistance ohm C-96/20/65 C-96/20/65+D-2/100 5 x 1012 -5x 1013 3 x 10 10 -8x 1011above 1 x 10 9 above 1 x 10 8Volume Resistivity
ohm-cm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1013 -1x 1014 1 x 1013 -1x 1014above 5 x 1010 above 5 x 10 9Surface Resistance
Adhesive Surface ohm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1012 -1x 1013 1 x 1011 -5x 1011above 1 x 1010 above 5 x 10 9Laminate Surface
ohm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1012 -1x 1013 5 x 1010 -5x 1011
above 1 x 10 9 above 5 x 10 8Dielectric Constant
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50 4.0 - 5.04.2 - 5.2less than 5.5less than 6.0Dissipation Factor
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50
0.020 - 0.0300.022 - 0.032less than 0.050less than 0.060Solder Float (260℃)sec A 40 – 50above 15Peel Strength
Cu.foil 1 oz (0.035mm)
kg f/cm A S 1.8 - 2.21.8 - 2.2above 1.42above 1.42Flexural Strength (LW)
(CW)kgf/mm 2
A
15 - 1814 – 17above 8.16above 8.16Water Absorption %
E-24/50+D-24/230.5 - 0.7
less than 1.2
Trichloroethylene -Immersion in boiling Trichloroethylene No abnormality No abnormality
General Properties
Designation
DS-1202
ANSI Grade
FR-2
Test Item
Unit
Test Condition
Property Data
Standard Value Guaranteed Value Flammability
-UL-94
avg : 3.0 max : 8.0avg : 5.0 max : 10.0Insulation Resistance ohm C-96/20/65 C-96/20/65+D-2/100 5 x 1011 -5x 1012 3 x 10 8 - 1 x 10 9above 1 x 10 11 above 1 x 10 8Volume Resistivity
ohm-cm C-96/20/65
C-96/20/65+C-96/40/90 5 x 1013 -5x 1014 5 x 1012 -5x 1013above 5 x 1012 above 5 x 1011Surface Resistance
Adhesive Surface ohm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1012 -1x 1013 3 x 1011 -7x 1011above 1 x 1012 above 5 x 1010Laminate Surface
ohm C-96/20/65
C-96/20/65+C-96/40/90 5 x 1011 -5x 1012 1 x 1010 -5x 1010
above 1 x 1011 above 1 x 10 9Dielectric Constant
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50 4.3 - 4.84.5 - 5.0less than 5.0less than 5.3Dissipation Factor
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50
0.020 - 0.0300.022 - 0.032
less than 0.040less than 0.050Comparative Tracking Index
volt IEC Method
600above 600Solder Float (260℃)sec A 35 - 45above 15Peel Strength
Cu.foil 1 oz (0.035mm)
kg f/cm A S 1.8 - 2.31.8 - 2.3above 1.42above 1.42Flexural Strength (LW)
(CW)kgf/mm 2
A
15 - 1814 - 17above 8.16above 8.16Water Absorption %
E-24/50+D-24/230.6 – 0.7
less than 0.75
Trichloroethylene Immersion in boiling General Properties
Designation
DS-1202G
ANSI Grade
FR-2
Test Item
Unit
Test Condition
Property Data
Standard Value Guaranteed Value Flammability
-UL-94
avg : 3.0 max : 8.0avg : 5.0 max : 10.0Insulation Resistance ohm C-96/20/65 C-96/20/65+D-2/100 5 x 1011 -5x 1012 1 x 10 8 - 5 x 10 9above 1 x 1011 above 1 x 10 8Volume Resistivity
ohm-cm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1013 -1x 1014 5 x 1012 -5x 1013above 1 x 1012 above 1 x 1011Surface Resistance
Adhesive Surface ohm C-96/20/65
C-96/20/65+C-96/40/90 1 x 1012 -1x 1013 3 x 1011 -7x 1011above 1 x 1012 above 5 x 1010Laminate Surface
ohm C-96/20/65
C-96/20/65+C-96/40/90 5 x 1011 -5x 1012 1 x 1010 -5x 1010
above 1 x 1011 above 1 x 10 9Dielectric Constant
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50 4.3 - 4.84.5 - 5.0less than 5.0less than 5.3Dissipation Factor
(1 MHz)-C-96/20/65
C-96/20/65+D-48/50
0.020 - 0.0300.025 - 0.035
less than 0.040less than 0.050Comparative Tracking Index
volt IEC Method
600above 600Solder Float (260℃)sec A 30 - 40above 15Peel Strength
Cu.foil 1 oz (0.035mm)
kg f/cm A S 1.8 - 2.31.8 - 2.3above 1.42above 1.42Flexural Strength (LW)
(CW)kgf/mm 2
A
14 - 1713 - 16above 8.16above 8.16Water Absorption %
E-24/50+D-24/230.6 - 0.7
less than 0.75
Immersion in boiling General Properties
(ANSI: CEM-1)
200
(ANSI: CEM-1) High CTI