MA5683T(config)#
MA5683T(config)#
MA5683T(config)#DISPLAY CURRent-configuration
{
命令:
DISPLAY CURRent-configuration
[MA5600V800R011: 5800]
#
[sysmode]
switch adsl mode to rfc2662 vdsl mode to tr129
xpon mode switch-to profile-mode
protocol support h248
system ex-mode backup
#
[global-config]
alarm output alarmid 0x64110001
alarm output alarmid 0x64120001
dba-profile add profile-id 100 profile-name "ceshi" type3 assure 409600 max 1024000
ont-srvprofile gpon profile-id 100 profile-name "ceshi"
ont-port eth 4
commit
ont-lineprofile gpon profile-id 0 profile-name "line-profile_default_0"
tcont 0 dba-profile-id 2
tcont 1 dba-profile-id 0
commit
quit
ont-lineprofile gpon profile-id 100 profile-name "ceshi"
tcont 1 dba-profile-id 100
gem add 1 eth tcont 1
gem mapping 1 0 vlan 100
commit
quit
#
[device-config]
board add 0/5 H802GPBD
board add 0/9 H801GICK
board add 0/12 H801CITD sub0 BITSB
board add standby sub0 CKMC
rack info 0 description "RACK-300" name "RACK-300" manufactured-name "Huawei" #
[public-config]
snmp-agent local-engineid 800007DB0304F9389148000A
#
[vlan-config]
vlan 100 smart
port vlan 100 0/9 0
#
[vlan-srvprof]
vlan service-profile profile-id 100 profile-name "ceshi"
user-bridging enable
commit
vlan bind service-profile 100 profile-id 100
#
[gpon]
interface gpon 0/5
port 0 ont-auto-find enable
port 1 ont-auto-find enable
port 2 ont-auto-find enable
port 3 ont-auto-find enable
port 4 ont-auto-find enable
port 5 ont-auto-find enable
port 6 ont-auto-find enable
port 7 ont-auto-find enable
ont add 0 1 sn-auth "485754433F52DD9A" omci ont-lineprofile-id 100 ont-srvprofile-id 100 desc "ceshi-1"
ont add 0 2 sn-auth "485754433F52DE9A" omci ont-lineprofile-id 100 ont-srvprofile-id 100 desc "ceshi-1"
ont port native-vlan 0 1 eth 1 vlan 100 priority 0
ont port native-vlan 0 1 eth 2 vlan 100 priority 0
ont port native-vlan 0 1 eth 3 vlan 100 priority 0
ont port native-vlan 0 1 eth 4 vlan 100 priority 0
ont port native-vlan 0 2 eth 1 vlan 100 priority 0
ont port native-vlan 0 2 eth 2 vlan 100 priority 0
ont port native-vlan 0 2 eth 3 vlan 100 priority 0
ont port native-vlan 0 2 eth 4 vlan 100 priority 0
#
[giu]
interface giu 0/12
mdi 2 normal
#
[emu-config]
emu add 0 fan 0 1 "H801FCBI"
emu add 1 h801citd 0 10 "H801CITD"
#
[bbs-config]
service-port 1 vlan 100 gpon 0/5/0 ont 1 gemport 1 multi-service user-vlan 100 tag-transform translate inbound traffic-table index 6 outbound traffic-table
index 6
service-port 2 vlan 100 gpon 0/5/0 ont 2 gemport 1 multi-service user-vlan 100 tag-transform translate inbound traffic-table index 6 outbound traffic-table
index 6
#
[abs-config]
config
#
mpls label start 8192
#
[prevlanif]
interface vlanif100
#
[vlanif]
interface vlanif100
ip address 192.168.1.254 255.255.255.0 #
[meth]
interface meth0
ip address 10.11.104.2 255.255.255.0 #
[null]
interface null0
#
aaa
authentication-scheme "default"
#
authorization-scheme "default"
#
accounting-scheme "default"
#
domain "default"
#
return
MA5683T(config)#
MA5683T(config)#
MA5683T(config)#disdev
^
% 未知的命令,错误位于'^'所指的位置MA5683T(config)#display dev
^
% 未知的命令,错误位于'^'所指的位置
MA5683T(config)#display version
{
命令:
display version
版本: MA5600V800R011C00
补丁: SPC100 SPH102 HP1007 HP1102
产品类型: MA5683T
主用主控板运行区域信息:
--------------------------------------------------
当前程序运行区: A
当前数据运行区: A
A区程序的版本: MA5600V800R011C00
B区程序的版本: MA5600V800R011C00
A区数据的版本: MA5600V800R011C00
B区数据的版本: MA5600V800R011C00 --------------------------------------------------
备用主控板运行区域信息:
--------------------------------------------------
当前程序运行区: A
当前数据运行区: A
A区程序的版本: MA5600V800R011C00 B区程序的版本: MA5600V800R011C00
A区数据的版本: MA5600V800R011C00 B区数据的版本: MA5600V800R011C00 --------------------------------------------------
已经运行: 0 天, 0 小时, 37 分钟, 38 秒
MA5683T(config)#
MA5683T(config)#
MA5683T(config)#display interface br
^
% 参数错误,错误位于'^'所指的位置
MA5683T(config)#display ip interface
{
命令:
display ip interface
meth0当前状态:DOWN
链路层协议当前状态:DOWN
MTU是1500字节
输入0包, 共0字节, 有0多播包
输出0包, 共0字节, 有0多播包
本接口地址是10.11.104.2/24
广播地址是: 10.11.104.255
收到的TTL等于1的报文个数: 0 收到的TTL非法的报文个数: 0
收到的ICMP报文总数: 0 ECHO应答: 0 不可达: 0
源地址抑止: 0
路由重定向: 0
ECHO请求: 0 路由广播: 0
路由请求: 0
时间超期: 0
IP头错: 0 时间戳请求: 0
时间戳响应: 0
信息请求: 0
信息响应: 0
掩码请求: 0
掩码响应: 0
未知类型: 0
null0当前状态:UP
链路层协议当前状态:UP (Spoofing)
MTU是1500字节
输入0包, 共0字节, 有0多播包
输出0包, 共0字节, 有0多播包
没有配置Internet协议处理
广播地址是: 0.0.0.0
收到的TTL等于1的报文个数: 0 收到的TTL非法的报文个数: 0
收到的ICMP报文总数: 0 ECHO应答: 0 不可达: 0 源地址抑止: 0 路由重定向: 0 ECHO请求: 0 路由广播: 0 路由请求: 0 时间超期: 0 IP头错: 0 时间戳请求: 0 时间戳响应: 0 信息请求: 0 信息响应: 0 掩码请求: 0
MA5683T(config)#interface vlanif 100
MA5683T(config-if-vlanif100)#display this
^ % 未知的命令,错误位于'^'所指的位置
MA5683T(config-if-vlanif100)#
MA5683T(config-if-vlanif100)#display curr
^
% 未知的命令,错误位于'^'所指的位置
MA5683T(config-if-vlanif100)# display curr
^
% 未知的命令,错误位于'^'所指的位置
MA5683T(config-if-vlanif100)#?
---------------------------------------------
vlanif100 模式命令:
---------------------------------------------
arp 地址解析协议
description 设置接口描述信息
dhcp DHCP命令组
dhcp-client DHCP client 命令
dhcp-server 配置此三层接口的DHCP server组dhcpv6-server 配置此三层接口的DHCPv6 server组display 显示相关信息
firewall 设定防火墙
igmp 设置IGMP参数
ip <组>ip命令组
ipv6 <组>ipv6命令组
isis 配置ISIS协议接口参数
mpls <组>mpls命令组
mtu <组>MTU命令组
ntp-service 指定NTP(网络时间协议)配置信息
ospf <组>ospf命令组
pim 设置PIM 协议接口参数
priority-mark 为本接口发出的报文标记优先级
quit 退出当前命令模式进入前一级命令模式,也可以退出配置环境return 退出当前命令模式进入Privilege模式
MA5683T(config-if-vlanif100)#
MA5683T(config-if-vlanif100)#
MA5683T(config-if-vlanif100)#quit
MA5683T(config)#display current-configuration
{
命令:
display current-configuration
[MA5600V800R011: 5800]
#
[sysmode]
switch adsl mode to rfc2662 vdsl mode to tr129
xpon mode switch-to profile-mode
protocol support h248
system ex-mode backup
#
[global-config]
alarm output alarmid 0x64110001
alarm output alarmid 0x64120001
dba-profile add profile-id 100 profile-name "ceshi" type3 assure 409600 max 1024000
ont-srvprofile gpon profile-id 100 profile-name "ceshi"
ont-port eth 4
commit
ont-lineprofile gpon profile-id 0 profile-name "line-profile_default_0"
tcont 0 dba-profile-id 2
tcont 1 dba-profile-id 0
commit
quit
ont-lineprofile gpon profile-id 100 profile-name "ceshi"
tcont 1 dba-profile-id 100
gem add 1 eth tcont 1
gem mapping 1 0 vlan 100
commit
quit
#
[device-config]
board add 0/5 H802GPBD
board add 0/9 H801GICK
board add 0/12 H801CITD sub0 BITSB
board add standby sub0 CKMC
rack info 0 description "RACK-300" name "RACK-300" manufactured-name "Huawei" #
[public-config]
snmp-agent local-engineid 800007DB0304F9389148000A #
[vlan-config]
vlan 100 smart
port vlan 100 0/9 0
#
[vlan-srvprof]
vlan service-profile profile-id 100 profile-name "ceshi" user-bridging enable
commit
vlan bind service-profile 100 profile-id 100
#
[gpon]
interface gpon 0/5
port 0 ont-auto-find enable
port 1 ont-auto-find enable
port 2 ont-auto-find enable
port 3 ont-auto-find enable
port 4 ont-auto-find enable
port 5 ont-auto-find enable
port 6 ont-auto-find enable
port 7 ont-auto-find enable
ont add 0 1 sn-auth "485754433F52DD9A" omci ont-lineprofile-id 100 ont-srvprofile-id 100 desc "ceshi-1"
ont add 0 2 sn-auth "485754433F52DE9A" omci ont-lineprofile-id 100 ont-srvprofile-id 100 desc "ceshi-1"
ont port native-vlan 0 1 eth 1 vlan 100 priority 0
ont port native-vlan 0 1 eth 2 vlan 100 priority 0
ont port native-vlan 0 1 eth 3 vlan 100 priority 0
ont port native-vlan 0 1 eth 4 vlan 100 priority 0
ont port native-vlan 0 2 eth 1 vlan 100 priority 0
ont port native-vlan 0 2 eth 2 vlan 100 priority 0
ont port native-vlan 0 2 eth 3 vlan 100 priority 0
ont port native-vlan 0 2 eth 4 vlan 100 priority 0
#
[giu]
interface giu 0/12
mdi 2 normal
#
[emu-config]
emu add 0 fan 0 1 "H801FCBI"
emu add 1 h801citd 0 10 "H801CITD"
#
[bbs-config]
service-port 1 vlan 100 gpon 0/5/0 ont 1 gemport 1 multi-service user-vlan 100 tag-transform translate inbound traffic-table index 6 outbound traffic-table
index 6
service-port 2 vlan 100 gpon 0/5/0 ont 2 gemport 1 multi-service user-vlan 100 tag-transform translate inbound traffic-table index 6 outbound traffic-table
index 6
#
[abs-config]
config
#
[config]
mpls label start 8192
#
[prevlanif]
interface vlanif100
#
[vlanif]
interface vlanif100
ip address 192.168.1.254 255.255.255.0
#
[meth]
interface meth0
ip address 10.11.104.2 255.255.255.0
#
[null]
interface null0
#
MA5683T(config)#interface vlanif 100
MA5683T(config-if-vlanif100)#ip address 192.168.88.254 24