多层住宅建筑给排水的一些问题 原文和英语翻译

The multilevel residential housing is given and drains off water several questions designed

Su mmary: This text give and drain off water on multilevel residential housing design supply water the exertion of the tubular product , Way of laying of pipeline, water gauge produce family set up, establishment and air conditioner condensation water of pot-type boiler discharge issue goes on the discussion , And put forward some concrete views. Keyword: Skyscraper, supply water the tubular product , the pipeline is laid, The water gauge, the solar water heater.

The skyscraper is simple with its auxiliary facility, the fabrication cost is low, the characteristic such as being convenient of estate management, Receive the welcomes of the real estate developer and vast resident of small and medium-sized cities very much. How project planning and design of inhabited region, scientific and technological industry of comfortable house, lead the request according to 2000, Improve the design level of the house, build out a comfortable living space for each household, It is each designers duty. As the heart of the house --The kitchen, bathroom, is that the function is complicated, hygiene, safe and comfortable degree are expected much, It is miscellaneous to build, the space expecting much in technology. So, the designer must consider synthetically with the idea and method of global design that the kitchen,

bathroom give installation of the drainage pipeline and equipment, etc. Give and drain off water on skyscraper design supply water exertion, to lay pipeline of tubular product, water gauge produce family set up, establishment and empty of pot-type boiler now Transfer condensation water discharge issue discuss together with colleagues.

( 1 ). Supply water tubular product select problem for use

Traditional water supply tubular product adopt zinc-plated steel tube generally, because zinc-plated steel tube exchange the corrosion, Use short-lived , use for and send domestic water can satisfied with water quality sanitary standard shortcoming, Ministry of Construction is popularizing the application of the feed pipe of plastics energetically . A lot of districts and cities have already expressed regulations: Forbid designing and using the zinc-plated steel tube , use widely the feed pipe of plastics. The plastics supply water In charge of compared with metal pipeline, light, it is fine to able to bear the intensity of keeping, Send obstruction little liquid , able to bear chemistry better to corrode performance, it is convenient to install, The steel energy-conservation of the province, merit of having long performance life etc.. Supply water and use plastics pipeline: Hard polyvinyl chloride( PVC-U), high density polyethylene( HDPE), pay and unite polyethylene( PEX) , modify the polypropylene( PP-R, PP-C), gather butane( PB), aluminum mould and compound and in charge of and the steel is molded and compound and is managed etc.. Choice of tubular product economic comparative course of technology, technology should from pressure, temperature, environment for use, install method ,etc. go on and consider, Combine owners at the same time request

and the house of grade, carry on and fix after being consider synthetically technology not economic. The above plastics supply water tubular product can supply water tubular product as house life. The economic and functional house conciliating Strand room in the face of the masses of with low- and medium-level incomes resident, can select for use hygiene grades of hard polyvinyl chloride in charge of as feed pipe mainly, In order to reduce the fabrication cost; Medium-to-high grade commodity apartment available aluminum Mould and compound and in charge of or other plastics supply water the tubular product as the feed pipe. House mix hot water temperature that water order exceed 600 C, so above-mentioned tubular product in charge of except hard polyvinyl chloride and aluminum plastics compound and in charge of( PE-AL-PE), Mostly the tubular product can be regarded as the hot water pipeline of the house.

( 2 ). Pipeline lay problem

1. G ive and drain off water it set up there aren’t one that in charge of

1) Will install it in the corner place of the kitchen, bathroom tomorrow. Adopting this kind of way of laying more in the design of house in the past, it is convenient for it to construct, But will reveal the pipeline and hinder the room beautifully tomorrow Watch, the households will mostly be hidden with the light quality material in the equipment two times.

2 ) Will install it in the overcast angle place of the outer wall of the building tomorrow. Way this suitable for southern weather warm district only, the minimum temperature in winter cant be lower than zero degrees Centigrade, In case water pipe

water-logging freeze ice is bloated to split pipeline, influence household use. Pipeline lay in outer wall, influence building to be beautiful, too inconvenient on manage and maintain in the future.

3) Lay it in the pipeline well. This way makes the room clean and beautiful, but the pipeline well has taken up the area of the bathroom, And pipeline construct, maintain relatively more difficult. Bathroom set up concentrate pipeline well, concentrate pipeline on assign in the well feed pipe, drain pipe, This is that the civilized importance lives in the kitchen of comfortable house, bathroom Embodiment. I think : Should consider the establishment of the pipeline well of the bathroom in the medium-to-high grade building conceptual design of commodity apartment, Improve quality of using of bathroom promptly so , can solve hard polyvinyl chloride drain pipe rivers noise heavy problem, Improve the environmental quality level of the room; Whether for bathroom in the areas for little economic and functional house and Overcome difficulties room, warm area give and drain off water and set up and in charge of and can consider and lay in the outer wall in the South, In order to increase using the space of the bathroom; Pipeline install and in the room, should influence kitchen, bathroom every sanitary equipment use of function tomorrow

2. S upply water and prop up there aren’t tube

House supply water prop up and in charge of pipe diameter one ≤ 32mm, de of battle,, little plastics feed pipe of pipe diameter is the crooked state, So the house

supplies water and is propped up and in charge of being recommended and adopted and set up secretly. Supply water to prop up to manage darkly There are thes way had:

1) Set up in the brick wall secretly. Wall turn on and in charge of trough in brick when constructing, in charge of trough width tube +20 mm, de of external diameter,, degree of depth tube external diameter de, The pipeline is imbedded and managed directly Trough, and with in charge of card fix in trough of inning charge of son.

2) Whether pipe diamete r supply water and prop up and last de ≤ 20mm,can set up at floor secretly piece make level by layer. Turn on and in charge of trough in floor( ground) the board when constructing, it wides trough have to be de +10 mm deeply 1/2 of the de, Half pipeline imbed and in charge of trough, and with in charge of card fix in trough of inning charge of tube. Aluminum mould compound and in charge of and pay and unite polypropylene in charge of pipeline adopt metal pipe fittings connection, Must strengthen and in charge of trough size when adopting and set up secretly, and rivers some flood peak loss relatively heavy. Assign the relative house that concentrated to the kitchen, bathroom interior hygiene utensil, Can adopt and divide Water device go on and join , divide water device whether one more than branch in charge of and connect, every hygiene utensil supply water and prop up and in charge of and connects and publishes from the water dividing device separately. Can already prevent the tube burying the pipeline secretly from being connected like this Permeate the question. Can reduce some flood peak lost, decrease the fabrication cost of pipe networks

3)Drain off water and prop up the tube to lay

House room drain off water and in charge of and should set up at the time of inning this each, drain off water and in charge of permeating sideways like this canning prevent the sewage from waiting for the pollutant to enter the neighbor family sideways, Will not influence the neighbor either when the pipeline is maintained Normal life of one. Kitchen wash water drainage of basin propped up and in charge of generalizing inserts draining off water to stand to manage this layer of floor sideways; Floor drainage off water propped up and in charge of laying the room of lower floor. A lot of colleagues think now: Whether kitchen the ground it lay ceramic tile of, whose name is clean in when need develop with water,not strong in meaning to set up floor drain, So kitchen set up ground floor drain, avoid and drain off water and prop up and in charge of and enter neighbor family sideways already so, Can increase using the space of the kitchen .

Bathroom drain off water and prop up and in charge of and lay concrete measure have in this layer sideways inside:

1)Improve the bathroom ground . Ground tendency high 150mm, adopt back row type take stool pot, washing basin, bath tub, water drainage of floor drain in charge of and bury in cushion layer secretly sideways.

2)Adopt the sinking type bathroom. Bathroom sink 350mm the floor, hygiene utensil drain off water and in charge of and bury on sinking space secretly sideways

Two method these can realize water drainage of bathroom prop up and in charge of earths surface to bury underground this one without entering the neighbor family sideways. Bury pipeline when installing, construction quality must check on strictly, can construct bathroom ground after confirming qualified secretly, So as not to leave the hidden danger in giving in the future using. Bathroom ground construct and can pack coal ash light quality material , also can adopt and lay bricks impracticable to lay plate making construct ground, Ground must make waterproof to deal with, method can waterproof to deal with according to roofing, make two oil one rubber and plastic ointment waterproof cloth.

( 3 ) Water gauge the open air set up problem

The water gauge is had indoors, not only the work load of checking meter is very heavy , but also make the security and privacy of the house reduce greatly . So house divide into households of water gauge or divide households of figure of water gauge Show that should be set up in the open air. Skyscraper water gauge the open air set up following several kinds of forms:

1.Adopt far it pass by water gauge

Change the ordinary water gauge into and pass the water gauge far, is joined the water gauge and data gathering machine by a signal line, And then reach intelligence to manage( the computer). Its merit lies in saving a large amount of people Strength comes to check meter, the data are accurate, the shortcoming is that the fabrication cost is high.

2.Adopt magnetic stripe card of by water gauge

Users buy the electronic card of the running water Company in advance , then insert it in the storing device of the water gauge, Card amount of money deduct automatically on the water, this way user need to prepay the water rate, The price of the water gauge is relatively high.

3. Adopt it set up at the open air water gauge not ordinary

1)The water gauge is set up in the stair have a rest in the alcove of the platform. Household watersupply to prop up and manage and enter the kitchen, bathroom after the water gauge is measured. Way this realize water gauge produce room set up, equivalence low project have , supply water and set up and in charge of and set up with water gauge office results in aesthetic problems in stair. It suitable for the South warm district kitchen, bathroom assign close to the houses of positions of staircase.

2)The water gauge concentrates on being set up among the water gauges( meter box). Person who give when supplying water, set up water gauge in ground floor( meter box) on falling, every household watersupply to prop up and is in charge of applying having in the pipeline well, Southern area can overcast horn place lay along the outer wall in building too; Person who give when supplying water, can set up water gauge in roof( meter box) under upgoing. This way increases and supplies water to prop up In charge of and lay length, pipeline lay and influence building to be beautiful along outer wall. Water gauge produce way choice that family assign, must combine house kitchen, bathroom plane assign characteristic and concrete request of developer, Carry on to

several feasibility scheme the above economic technology fix after comparing. Property well-managed medium-to-high grade commodity apartment of housing district, can adopt and pass the water gauge far , It is that the water gauge will use the developing direction in the future; Estate management perfect medium- to-high grade commodity apartment of housing district, can adopt magnetic stripe card water gauge( Company have this kind district of business can design in running water) Or concentrate on setting up it among the water gauges( case); Southern area unit type house can set up rest platform office in stair with ordinary water gauge, In order to reduce the fabrication cost.

( 4 ) Establishment question of the pot-type boiler

Should reserve and install hot water supply terms of facility, set up hot water supply facilities with when the design of house. Have and concentrate house that hot water supply on , should consider house assign with installation position and cold hot water pipeline of hot water device. The pot-type boiler generally has three kinds, such as gas, electricity, solar energy,etc.. Whether last kitchen gas heater and electric heater or Bathroom inside, give when draining off water design shoulding reserve installation position and cold hot water interface of pipeline of water heater in advance in building, Install by oneself when convenient users fit up. Solar energy and hot water It is simple and convenient and safe for device to use, need fuel and electric power is low to run the expenses, Have long performance life, pollution-free, received by the masses of users favourably very much, Many houses have been small in recent years The district all

install the solar water heater at the time of designing and construct. Solar water heater install and at the roof, need to set up the cold hot water pipeline among bathroom and water heater of the roofing like this generally, Consider installation of solar water heater when the design of house, household can only lay cold and hot pipeline along the building outer wall when installing in the future, Increase household degree of difficulty when installing like this , increase pipeline make the investment, influence building beautiful. Give when draining off water the design needing to solicit the developers suggestion first in building, Interconnected system one design, construct the solar water heater in unison; Reserve solar water heater and cold hot water installation position of pipeline in advance only. The cold hot water pipeline of the solar water heater can be laid In the pipeline well; Set up pipeline house of well , can set up one UPVC drain pipe of de110 as solar water heater hot water sleeve pipe of pipeline close to corner of person who take a shower in bathroom, Set up a de110 *75 three direct links in each hygiene interval ground, as connecting the entry of cold and hot water pipe

( 5 ) Air conditioner condensation ink discharge the issue

In recent years, air conditioner enter huge numbers of families gradually, condensation water amorphous to discharge the building outer wall of pollution air conditioner have, Have influenced a beautiful important problem of biotope already. Building give when draining off water design shoulding consider air conditioner condensation ink discharge in a organized way. Concrete method can machine set up the water drain pipe of the condensation by the position outside reserving air

conditioner, Drain off water and set up and in charge of and select PVC-U drain pipe de40 for use , reserve three direct links of draining off water highly in each air conditioner, It is convenient for air conditioner to drain off water hose insert directly.

多层住宅建筑给排水设计的几个问题

摘要：本文就多层住宅建筑给排水设计中给水管材的选用，管道的敷设方式，水表出户设置，家用热水器的设置及空调冷凝水排放等问题进行探讨，并提出一些具体看法。

关键词：多层住宅,给水管材,管道敷设,水表,太阳能热水器

多层住宅以其配套设施简单，造价低，物业管理方便等特点，很受中小城市房地产开发商和广大居民的欢迎。如何按2000年小康住宅科技产业工程居住区规划设计导则的要求，提高住宅的设计水平，为每个住户营造出一个舒适的生活空间，是每个设计人员的职责所在。作为住宅的心脏――厨房、卫生间，是功能复杂，卫生、安全和舒适度要求高，营造繁杂,技术要求高的空间。因此，设计人员必须以整体设计的观念和方法，综合考虑厨房、卫生间给排水管道和设备的安装等。下面就多层住宅给排水设计中给水管材的选用、管道的敷设、水表出户设置、家用热水器的设置和空调冷凝水排放等问题与同行们一起探讨。

（一）给水管材选用问题

传统的给水管材一般采用镀锌钢管，由于镀锌钢管易锈蚀，使用寿命短，用于输送生活用水不能满足水质卫生标准等缺点，建设部正大力推广塑料给水管的应用。许多地市已明文规定：禁止设计使用镀锌钢管，推广使用塑料给水管。塑料给水管与金属管道相比，具有重量轻，耐压强度好，输送液体阻力小，耐化学腐蚀性能强，安装方便，省钢节能，使用寿命长等优点。给水用塑料管道主要有：硬聚氯乙烯（PVC－U）、高密度聚乙烯（HDPE）、交联聚乙烯（PEX）、改性聚丙烯（PP－R ，PP－C）、聚丁烯（PB）、铝塑复合管（PE－AL－PE，PEX－AL－PEX）和钢塑复合管等。

管材的选择是经济技术的比较过程，技术上应从压力、温度、使用环境、安装方法等方面进行考虑，同时结合业主的要求和住宅的档次，进行经济技术综合考虑后确定。以上所塑料给水管材都可作为住宅

生活给水管材。经济适用房和解困房主要面对广大中低收入居民，可选用卫生级硬聚氯乙烯管（PVC－U）作为给水管，以降低造价；中高档商品房可用铝塑复合管（PE－AL－PE，PEX－AL－PEX）或其他塑料给水管材作为给水管。住宅配水点的热水温度不超过600C，因此上述管材中除硬聚氯乙烯管（PVC－U）和铝塑料复合管（PE－AL－PE）外,大多管材可作为住宅的热水管道。

（二）管道敷设问题

1．给排水立管的敷设一般有以下几种方式

1）明装在厨房、卫生间的墙角处。在以往的住宅设计中较多采用这种敷设方式，它施工方便，但明露管道有碍居室美观，住户在二次装修时大多会用轻质材料给予隐藏起来。

2）明装在建筑物外墙阴角处。这种方式仅适用于南方天气较暖和的地区，冬季的最低温度不得低于零摄氏度，以防水管内水冻结成冰，胀裂管道，影响住户使用。管道在外墙敷设，影响建筑美观，也不便于日后管理和维修。

3）敷设在管道井内。这种方式使居室洁净美观，但管道井占用了卫生间的面积，且管道施工、维修都比较困难。卫生间设立集中管道井，把给水管、排水管都集中在管道井里布置，这是小康住宅厨房、卫生间居住文明的重要体现。本人认为：在中高档的商品房建筑方案设计时应考虑卫生间管道井的设置，这样即提高卫生间的使用质量，又可解决硬聚氯乙烯排水管水流噪声大的问题，提高居室的环境质量水平；对于卫生间面积较小的经济适用房和解困房，在南方较暖和地区给排水立管可考虑敷设在外墙，以增大卫生间的使用空间；管道明装在室内时，应不影响厨房、卫生间各卫生设备功能的使用。

2．给水支管敷设

住宅给水支管管径一役de≤32mm，小管径的塑料给水管，呈弯曲状态，故住宅给水支管采用暗设。给水支管暗设的方式有：

1）暗设在砖墙里。施工时在砖墙面开管槽，管槽宽度为管子外径de+20mm，深度为管子外径de，管道直接嵌入管槽，并用管卡将子固定在管槽内。

2）对于小管径给水支管de≤20mm，可暗设在楼（地）面找平层里。施工时在楼（地）板面上开管槽，槽宽为de+10mm，深为1／2de，管道半嵌入管槽里，并用管卡将管子固定在管槽内。铝塑复合管和交联聚丙烯管等管道采用金属管件连接，采用暗设时须加大管槽尺寸，且水流局部水头损失较大。对于厨房、卫生间内卫生器具布置相对集中的住宅，可采用分水器进行连接，分水器是一种多分支管接头，各卫生器具给水支管分别从分水器接出。这样既可避免暗埋管道的管接头渗透问题。又可减小局部水头损失，降低管网造价。

3）排水支管敷设

住宅室内排水横管宜设在本层套内，这样排水横管渗透时可避免污水等污染物进入邻户，管道维修时也不会影响到邻户的正常生活。

厨房内洗涤盆的排水横支管一般在本层楼板面上接入排水立管；地漏排水支管须敷设下层空间。现在许多同行都认为：厨房地面都铺设瓷砖，清洁地在时不须用水冲洗，设置地漏意义不大，故厨房内可不设地地漏，这样既避免排水横支管进入邻户，又可增大厨房的使用空间。

卫生间内排水横支管在本层敷设具体措施有：

1）提高卫生间地面。地面势高150mm，采用后排式坐便器，洗脸盆、浴盆和地漏的排水横管暗埋在垫层内。

2）采用下沉式卫生间。卫生间楼板面下沉350mm，卫生器具排水横管暗埋在下沉空间里。

这两种做法均可实现卫生间的排水横支管埋设本层的地面而不进入邻户。暗埋管道安装时，施工质量一定要严格把关，经验收合格后方可施工卫生间地面，以免给日后使用中留下隐患。卫生间地面施工可填充煤灰等轻质材料，亦可采用砌砖架空铺设制板施工地面，地面须做防水处理，做法可参照屋面防水处理，如做两油一布橡塑油膏防水。

（三）水表户外设置问题

水表设在户内，不但抄表的工作量很大，而且使住宅的安全性和私密性大大降低。故住宅的分户水表或分户水表的数字显示宜设在户外。多层住宅水表户外设置有以下几种形式：

1．采用远传水表

把普通水表换成远传水表，由一根信号线连接水表与数据采集机，再传至智能管理（微机）。它的优点在于节省大量人力来抄表，数据准确，缺点是造价高。

2．采用磁卡式水表

用户预先购买自来水公司的电子卡，然后把它插入水表的存贮器内，用水时卡上金额被自动扣除，这种方式用户需预付水费，水表价格较高。

3．采用普通水表设在户外

1）水表设在楼梯休息平台的壁龛里。住户给水支管经水表计量后进入厨房、卫生间。这种方式实现了水表出房设置，工程等价低，但给水立管和水表设在楼梯处影响美观。它适用于南方较暖和地区厨房、卫生间布置靠近楼梯间位置的住宅。

2）水表集中设在水表间（水表箱）。下行上给式供水时，在底层设水表间（水表箱），各层住户给水支管在管道井内敷设，南方地区也可在建筑物阴角处沿外墙敷设；上行下给式供水时，可在屋顶设水表间（水表箱）。这种方式增加给水支管敷设长度、管道沿外墙敷设影响建筑物美观。水表出户布置的方式选择，须结合住宅厨房、卫生间平面布置特点和开发商的具体要求，对以上几种可行性方案进行经济技术比较后确定。物业管理完善的住宅小区的中高档商品房，可采用远传水表，它是今后水表应用发展方向；物业管理不完善的住宅小区的中高档商品房，可采用磁卡式水表（在自来水公司有这种业务的地区可设计）或集中设置水表间（箱）；南方地区单元式住宅可用普通水表设在楼梯的休息平台处，以降低造价。

（四）家用热水器的设置问题

住宅设计时应预留安装热水供应设施的条件，或设置热水供应设施。所以在没有集中热水供应的住宅，应考虑家用热水器的安装位置及冷热水管道布置。家用热水器一般有燃气、电、太阳能等三种。燃气热水器和电热水器一般安装在厨房或卫生间内，在建筑给排水设计时应预留出热水器的安装位置和冷热水管道的接口，便于用户装修时自行安装。太阳能热水器使用简便安全，无需燃料及电力，运行费用低，使用寿命长，无污染，很受广大用户的欢迎，近几年来有不少的住宅小区在设计施工时就全部安装上了太阳能热水器。太阳能热水器一般安装在屋顶上，这样就需要在卫生间与屋面热水器之间设置冷热水管道，住宅设计时若不考虑太阳能热水器的安装，今后住户安装时只能将冷热管道沿建筑物外墙敷设，这样既增加住户安装时的难度，增加管线投资，又影响建筑的美观。所以在建筑给排水设计时需要先征求开发商的意见，是否统一设计，统一施工太阳能热水器；或只预留出太阳能热水器及冷热水管道的安装位置。太阳能热水器的冷热水管道可敷设在管道井内；不设管道井的住宅，可在卫生间靠近沐浴

器的墙角增设一根de110的UPVC排水管作为太阳能热水器热水管道的套管，在每户卫生间距地面1m 处设一个de110×75三通，作为冷热水管的接入口。

（五）空调冷凝水排放问题

近几年，空调逐渐进入千家万户，空调冷凝水无组织排放污染建筑物外墙，已是影响生活区美观的一个重要问题。建筑给排水设计时应考虑空调冷凝水的有组织排放。具体做法可在预留空调外机位置旁设置冷凝水排水管，排水立管选用PVC－U排水管de40，在每层空调机高度预留排水三通，便于空调机排水软管直接接入。

题为The multilevel residential housing is given and drains off water several questions designed 的论文翻译

英语原文及其翻译

Exploring Filipino School Counselors’ Beliefs about Learning Allan B. I. Bernardo [Abstract] School reform efforts that focus on student learning require school counselors to take on important new roles as advocates of student learning and achievement.But how do school counselors understand the process of learning? In this study, we explore the learning beliefs of 115 Filipino school counselors who indicated their degree of agreementwith 42 statements about the process of learning and the factors thatinfluence this process.A principal components analysis of the responses to the 42 statements suggested three factors:(F1)social-cognitive constructivist beliefs, (F2) teacher-curriculum-centered behaviorist beliefs,and (F3) individual difference factors.The preliminary results are briefly discussed in terms of issues related to how Filipino school counselors’ conceptions of learning may guide their strategies for promoting student learning and achievement. [Key words]beliefs about learning, conceptions of learning, school counselors, student learning, Philippines School reform efforts in different parts of the world have focusedon students’learning. In particular,most school improvement programsnow aim to ensure that students acquire the high-level knowledge and skills that help them to thrive in today’s highly competitive globaleconomy (e.g., Lee & Williams, 2006). I n this regard, school reform programs draw from various contemporary theories and research on learning (e.g.,Bransford,Brown, & Cocking, 1999; Lambert & McCombs, 1998).The basic idea is that all school improvement efforts should be directed at ensuring students achieve high levels of learning or attainment of well-defined curricular objectives and standards.For example, textbooks (Chien & Young, 2007), computers and educational technology (Gravoso, 2002; Haertnel & Means, 2003;Technology in Schools Task Force, 2003), and educational assessment systems (Black & Wiliam2004; Cheung & Ng, 2007; Clark, 2001; Stiggins, 2005) are being reconsidered as regards how they can effectively provide scaffolds and resources for advancing student learning. Likewise,the allocation and management of a school’s financial resources are assessed in terms ofwhether these are effectively mobilized and utilized towards improving student learning (Bolam, 2006; Chung & Hung, 2006; Retna, 2007). In this regard, some advocates have also called for an examination of the role of school counselors in these reform efforts (Herr, 2002). Inthe United States, House and Hayes (2002) challenged school counselors to take proactive leadership roles in advocating for the success of all

蓝梅主编 给排水科学与工程专业英语部分课文翻译中文版

第四单元给水系统 一般来说，供水系统可划分为四个主要组成部分:（1）水源和取水工程（2）水处理和存储（3）输水干管和配水管网。常见的未处理的水或者说是原水的来源是像河流、湖泊、泉水、人造水库之类的地表水源以及像岩洞和水井之类的地下水源。修建取水构筑物和泵站是为了从这些水源中取水。原水通过输水干管输送到自来水厂进行处理并且处理后的出水储存到清水池。处理的程度取决于原水的水质和出水水质要求。有时候，地下水的水质是如此的好以至于在供给给用户之前只需消毒即可。由于自来水厂一般是根据平均日需求流量设计的，所以，清水池为水需求日变化量提供了一个缓冲区。 水通过输水干管长距离输送。如果输水干管中的水流是通过泵所产生的压力水头维持的，那么我们称这个干管为增压管。另外，如果输水干管中的水流是靠由于高差产生的可获得的重力势能维持的，那么我们称这个干管为重力管。在输水干管中没有中间取水。与输水干管类似，在配水管网中水流的维持要么靠泵增压，要么靠重力势能。一般来说，在平坦地区，大的配水管网中的水压是靠泵提供的，然而，在不平坦的地区，配水管网中的压力水头是靠重力势能维持的。 一个配水管网通过引入管连接配水给用户。这样的配水管网可能有不同的形状，并且这些形状取决于这个地区的布局。一般地，配水管网有环状或枝状的管道结构，但是，根据当地城市道路和街区总体布局计划，有时候环状和枝状结构合用。城市配水管网大多上是环状形式，然而，乡村地区的管网是枝状形式。由于供水服务可靠性要求高，环状管网优于枝状管网。 配水管网的成本取决于对管网的几何形状合适的选择。城市计划采用的街道布局的选择对提供一个最小成本的供水系统来说是重要的。环状管网最常见的两个供水结构是方格状、环状和辐射状；然而，我们不可能找到一个最佳的几何形状而使得成本最低。 一般地，城镇供水系统是单入口环状管系统。如上所说，环状系统有一些通过系统相互连接的管道使得通过这些连接接的管道，可以供水到同一个需水点。与枝状系统不同，在环状系统中，由于需水量在空间和时间上的变化，管道中的水流方向并非不变。 环状管网可为系统提供余量，提高系统应对局部变化的能力，并且保证管道故障时为用户供水。从水质方面来说，环状形状可减少水龄，因此被推广。管道的尺寸和配水系统的设计对减少水龄来说是重要的因素。由于多方向水流模式和系统中流动模式随时间的变化，水不会停留在一个地方，这样减少了水龄。环状配水系统的优缺点如表4.1所述。 优点:1.Minimize loss of services.as main breaks can be isolated due to multidirectional flow to demand points.2.Reliability for fire protection is higher due to redundancy in the system.3.Likely to meet increase in water demand -higher capacity and lower velocities.4.Better residual chlorine due to in line mixing and fewer dead ends. 5.Reduced water age. 在文献中曾记载过，只考虑最低成本设计的环状管网系统会转化成树状似的结构，这一做法导致在最终的设计中失去最初的几何形状。环状保证了系统的可靠性。因此，一个只考虑最低成本为依据的设计打败了在环状管网中所提供的基本功能。有文献记载设计环状管网系统的方法。尽管这个方法也是仅以考虑最低成本为基础，它通过对管网中所有管道最优化规划从而保持了管网的环状结构。

文献翻译英文原文

https://www.wendangku.net/doc/0818947286.html,/finance/company/consumer.html Consumer finance company The consumer finance division of the SG group of France has become highly active within India. They plan to offer finance for vehicles and two-wheelers to consumers, aiming to provide close to Rs. 400 billion in India in the next few years of its operations. The SG group is also dealing in stock broking, asset management, investment banking, private banking, information technology and business processing. SG group has ventured into the rapidly growing consumer credit market in India, and have plans to construct a headquarters at Kolkata. The AIG Group has been approved by the RBI to set up a non-banking finance company (NBFC). AIG seeks to introduce its consumer finance and asset management businesses in India. AIG Capital India plans to emphasize credit cards, mortgage financing, consumer durable financing and personal loans. Leading Indian and international concerns like the HSBC, Deutsche Bank, Goldman Sachs, Barclays and HDFC Bank are also waiting to be approved by the Reserve Bank of India to initiate similar operations. AIG is presently involved in insurance and financial services in more than one hundred countries. The affiliates of the AIG Group also provide retirement and asset management services all over the world. Many international companies have been looking at NBFC business because of the growing consumer finance market. Unlike foreign banks, there are no strictures on branch openings for the NBFCs. GE Consumer Finance is a section of General Electric. It is responsible for looking after the retail finance operations. GE Consumer Finance also governs the GE Capital Asia. Outside the United States, GE Consumer Finance performs its operations under the GE Money brand. GE Consumer Finance currently offers financial services in more than fifty countries. The company deals in credit cards, personal finance, mortgages and automobile solutions. It has a client base of more than 118 million customers throughout the world

建筑工程及给排水专业中英文对照翻译

Laminar and Turbulent Flow Observation shows that two entirely different types of fluid flow exist. This was demon- strated by Osborne Reynolds in 1883 through an experiment in which water was discharged from a tank through a glass tube. The rate of flow could be controlled by a valve at the outlet, and a fine filament of dye injected at the entrance to the tube. At low velocities, it was found that the dye filament remained intact throughout the length of the tube, showing that the particles of water moved in parallel lines. This type of flow is known as laminar, viscous or streamline, the particles of fluid moving in an orderly manner and retaining the same relative positions in successive cross- sections. As the velocity in the tube was increased by opening the outlet valve, a point was eventually reached at which the dye filament at first began to oscillate and then broke up so that the colour was diffused over the whole cross-section, showing that the particles of fluid no longer moved in an orderly manner but occupied different relative position in successive cross-sections. This type of flow is known as turbulent and is characterized by continuous small fluctuations in the magnitude and direction of the velocity of the fluid particles, which are accompanied by corresponding small fluctuations of pressure. When the motion of a fluid particle in a stream is disturbed, its inertia

英语原文及翻译

高速视频处理系统中的信号完整性分析 摘要：结合高速DSP图像处理系统讨论了高速数字电路中的信号完整性问题，分析了系统中信号反射、串扰、地弹等现象破坏信号完整性的原因，通过先进IS工具的辅助设计，找出了确保系统信号完整性的具体方法。 关键词：高速电路设计信号完整性 DSP系统 深亚微米工艺在IC设计中的使用使得芯片的集成规模更大、体积越来越小、引脚数越来越多；由于近年来IC工艺的发展，使得其速度越来越高。从而，使得信号完整性问题引起电子设计者广泛关注。 在视频处理系统中，多维并行输入输出信号的频率一般都在百兆赫兹以上，而且对时序的要求也非常严格。本文以DSP图像处理系统为背景，对信号完整性进行准确的理论分析，对信号完整性涉及的典型问题[1]——不确定状态、传输线效应、反射、串扰、地弹等进行深入研究，并且从实际系统入手，利用IS仿真软件寻找有效的途径，解决系统的信号完整性问题。 1 系统简介 为了提高算法效率，实时处理图像信息，本图像处理系统是基于DSP+FPGA结构设计的。系统由SAA7111A视频解码器、TI公司的TMS320C6701 DSP、Altera公司的EPlK50QC208 FPGA、PCI9054 PCI接口控制器以及SBRAM、SDRAM、FIFO、FLASH等构成。FPGA是整个系统的时序控制中心和数据交换的桥梁，而且能够对图像数据实现快速底层处理。DSP是整个系统实时处理高级算法的核心器件。系统结构框图如图1所示。 在整个系统中，PCB电路板的面积仅为15cm×l5cm，系统时钟频率高达167MHz，时钟沿时间为0．6ns。由于系统具有快斜率瞬变和极高的工作频率以及很大的电路密度，使得如何处理高速信号问题成为一个制约设计成功的关键因素。 2 系统中信号完整性问题及解决方案 2．1 信号完整性问题产生机理 信号的完整性是指信号通过物理电路传输后，信号接收端看到的波形与信号发送端发送的波形在容许的误差范围内保持一致，并且空间邻近的传输信号间的相互影响也在容许的范围之内。因此，信号完整性分析的主要目标是保证高速数字信号可靠的传输。实际信号总是存在电压的波动，如图2所示。在A、B两点由于过冲和振铃[2]的存在使信号振幅落入阴影部分的不确定区，可能会导致错误的逻辑电平发生。总线信号传输的情况更加复杂，任何一个信号发生相位上的超前或滞后都可能使总线上数据出错，如图3所示。图中，CLK为时钟信号，D0、D1、D2、D3是数据总线上的信号，系统允许信号最大的建立时间[1]为△t。在正常情况下，D0、D1、D2、D3信号建立时间△t1<△t，在△t时刻之后数据总线的数据已稳定，系统可以从总线上采样到正确的数据，如图3(a)所示。相反，当信号D1、D2、D3受过冲和振铃等信号完整问题干扰时，总线信号就发生

给排水环工 专业英语(华南理工大学)课文翻译 下

Unit 12 水的净化 水分子是没有记忆的，所以去讨论你所喝的水是被污染了并净化了多少次是可笑的（市没有意义的），好像水分子逐渐厌烦了（逐渐被耗尽了）。最重要的是你喝的水纯度如何。 对水的净化方法已发展到了很详细并且尖端的技术。然而通常采用的净化水的方法对水污染的性质的通常的理解应该是容易理解的，并在某些情况下是显而易见的。 水中的杂质可分为悬浮的，胶体态的或溶解态的。由于悬浮的颗粒大足以被沉淀或被过滤掉。胶体态的或溶解态的杂质较难以去除掉。去除他们的一个可能的方法是以某种方法把这些微小的颗粒物结合成比较大的颗粒然后采用去除悬浮物的方法来处理。另一种可能的方法是把他们转变为气态然后是他们从水中散发到大气中，无论采用哪一种方法，有一点必须记住的是提升水或用泵将水输送通过滤床都需要能量。 根据这些原则，来考虑用于净化城市污水的步骤。第一步是废水的收集系统。从家庭、医院、学校排放的水中的污染物包含食物残渣、人类排泄物、纸张、肥皂、洗涤剂、污垢、织物和其他混杂的残骸，当然还有微生物。这些混合物被称为厕所污水或生活污水。这里Sanitary 这个形容词比较不恰当，因为它几乎没有描述污水的情况，他只笼统地指人产生的污染物被污水管所排走）。这些污水，有时与污水管网中从商业建筑来的污染物、工业污染物及雨水污染物合流。有些体系把污水与雨水分流而有些是合流。合流制的管道便宜，并在旱季时是合理的，但在暴雨期时的总流量容易超过处理厂的容量，结果应允许有些水溢流而直接进入受体河流中。 初级处理 当污水进入处理厂时，首先通过一系列的格栅以去除其中大的物体如老鼠或葡萄柚，然后通过一个磨碎装置以便把剩余的物体的大小减小至足够小以至在后续的工艺中可以有效的处理。下一步是一系列的沉淀室来去除重的粗沙例如雨水冲刷路面带入的沙粒，然后其他悬浮的固体（包括有机营养物）缓慢的沉淀而得到去除，这个过程需耗时大约一小时。从开始到这个过程的整个工艺称为处级处理，这一级处理的费用相对低，但是没有完成多少任务。 二级处理 接下来的一系列步骤是企图通过某些强化的生物作用来减少大部分溶解态或细小的悬浮有机物质。分解有机物需要氧气和生物体及有利于提供营养的环境。可达到上述目的的一个装置是滴滤池。在此装置中，石头滤床上布有回转布水器，以便把污水（均匀的）连续的分布。当污水以水滴流过石头滤料时，在有氧的情况下向大量的没有驯化过得生物体提供了营养。 另一种方法是活性污泥法。在这里，污水在经过初级处理后被泵到一个曝气池中，然后与空气及含有细菌的污泥混合几个小时。在活性污泥法中进行的生物反应与滴滤池中的相似。污泥中的细菌代谢有机物； 而作为二级消费者的原生动物以细菌为食。经二级处理过的水流入沉淀池，在那里进行充满细菌的污泥沉淀下来然后回流到反应器中。并且为了操持稳定必须去除掉一部分污泥。与滴滤池相比活性污泥法所需的土地面积小，并且由于活性污泥法暴露于空气的面积小结果他发出的臭味也比滴滤池的少。 从生物处理过的出水仍然含有细菌，不宜于排放入地表水，更不用说排放入水源地。既然微生物已经完成了任务，现在可以把他们杀死了。所以最后的步骤是进行消毒，通常采用氯来处理。在处理水最后排放前把氯气通入15分钟，这样可以杀死99%的有害的细菌。 三级处理或高级处理 尽管污水经过初级处理和二级处理后已经在很大程度上得到了净化，但对有些复杂的水污染来说仍然不够。第一在生活污水中的许多污染物没有被去除掉，并且一些硝酸盐和磷酸盐等无机离子仍然留在处理过的水中，正如我们知道的，这些污染物作为植物营养物，是造成富营养化的因素。 1.絮凝沉淀 在讨论生物处理前提到过把细小的颗粒物转变为大的颗粒有利于他们的快速沉淀。对无机污染物来说也是如此。许多无机胶体颗粒是亲水性的，他们比较易于吸附于水分子；在他们吸附于水分子过程中又会席卷许多其他胶体颗粒从而不容易在合理（较短的）时间内沉淀下去。

英文翻译(原文)

GRA VITY RETAINING?WALL 1. INTRODUCTION Retaining walls are structures used to provide stability for earth or other material where conditions disallow the mass to assume its natural slope, and are commonly used to hold back or support soilbanks,coal or ore piles, and water. Retaining walls are classified, based on the method of achieving stability, into six principal types (Fig.1). The gravity-wall depends upon its weight, as the name implies, for stability. The cantilever wall is a reinforced-concrete wall that utilizes cantilever action to retain the mass behind the wall from assuming a natural slope. Stability of this wall is partially achieved from the weight of soil on the heel portion of the base slab. A counterfort retaining wall is similar to a cantilever retaining wall, except that it is used where the cantilever is long or for very high pressures behind wall and has counterforts, which tie the wall and base together, built at intervals along the wall to reduce the bending moments and sheers. As indicated in Fig.1c, the counterfort is behind the wall and subjected to tensile forces. A buttressed retaining wall is similar to a counterfort wall, except that the bracing is in front of the wall and is in compression instead of tension. Two other types of walls not considered further are crib walls, which are built-up members of pieces of precast concrete, metal, or timber and are supported by anchor pieces embedded in the soil for stability, and semigravity walls, which are walls intermediate between a true gravity and a cantilever wall. (a)(b)(e)

水文与水资源专业英语文章翻译

3单元 地下水位的高低可在一年内大幅波动，下降和上升后，在干燥的季节，降水期。因此，为了保证连续供水，井应穿透许多米水位以下。当水从井里抽水，它在水面产生抑郁，大致锥形的形状，称为漏斗。如果抽重，水表不仅可以降低周围的好但还可延伸到大面积。这在美国西部的部分是这样的。在这种情况下，可以说，地下水被“开采”。即使抽人立即停止，它可能需要数百年的地下水得到补充。下面的例子说明了这一点： 例如，在干燥的美国西南部，含水层补给是每年只有1英寸深的水的十分之二点位置。在这些地区，这是不寻常的泵两英尺或更多的水用于灌溉和其他用途的每年。在这个简单的例子，如果整个含水层抽水的速度，每年的开采量将相当于120年和十年的补给，泵将1200年积累的水。在泵送期间新补给可以忽略不计。机械问题和经济因素阻止完全脱水的含水层，但原则上是有效的例子。 短期承压是适用于任何情况，地下水位上升，在一个以上的水平，这是最初遇到的。这样的情况发生，两个条件必须满足：（1）水，必须限制在一个含水层，是倾斜的，一端暴露在表面，在那里可以得到水；和（2）防渗层，上面和下面的含水层，必须防止水逃避，这样一层被窃听，被上面的水的重量产生的压力会使水上升。如果没有摩擦，井里的水会上升到顶部的水位。含水层。 自流系统作为管道，将水从很远的偏远地区的充电放电点。这样水倒在威斯康星州中部年前现在是从地面和社区许多英里远，伊利诺斯。在南达科他州这样的系统已经从西部的黑山带水，向东跨越国家。在不同的尺度上，城市供水系统可能是人为的自流系统的例子。水塔，为抽水，可能是补给区，管道的承压含水层，在家中的自流井的水龙头。 4单元 矿产勘查在世界表明温度在深油、矿产品通常会增加在地表以下深度增加。在这样的情况下增加温度约0.6度，平均每30米。因此，当地下水在深循环，它变得激烈，如果它上升到表面，水是温泉。一些温泉水在美国，特别是在东部，加热这种方式。在美国，绝大多数的温泉发现于西方。这种分布的原因是，大部分温泉的热源是冷却的火成岩，它是在西方，火成活动已经最近。 间歇泉是间歇性的温泉或喷泉，水柱喷射的伟大力量在不同的时间间隔，通常上升30-60米。水流停止后，一列蒸汽冲出，通常以雷鸣般的轰鸣声。这或许是世界上最著名的间歇泉是黄石公园的老忠实喷发，大约每小时一次。间歇泉也在世界的其他地区，包括冰岛和新西兰，在那里长期间歇泉，意为“喷泉”或“井喷”这个词。 间歇泉时，地下水是地下室加热。室底部，水在巨大的压力下，由于上覆水的重量。因此，一个100度以上的温度就会沸腾所需的前。例如，在一个300米的室内水下必须达到一个温度近230度才开。加热使水膨胀，其结果是某些流出的顶部。这减少了压力，和水变成蒸汽，使间歇泉喷发。 从温泉和间歇泉地下水通常包含在解决方案比其他来源的地下水多材料因为热水比冷水更有效的溶解。当水中含有大量溶解的二氧化硅，硅华沉积在春天。石灰石，方解石的一种，是在石灰岩地区温泉特色存款。一些温泉含硫磺。除了使水的味道不好，硫发出难闻的气味。毫无疑问，臭蛋的春天，内华达州，这种情况。 11单元 一种污染物，是任何物质，生物或化学。在一个可识别的过量的有害的其他理想的生物。在这个框架内，过量的重金属如发汞；某些放射性同位素；氮，磷，钠；和其他有用的，甚至是必要的元素，以及某些致病性细菌和病毒污染物。在某些情况下，材料可作为一种污染物，世界人口中的一段特别的虽然它对其他部分不被认为是有害的。例如，在适当的复合氮超标有害于婴儿，但少了很多成年人如果在所有。在这样的方式，过多的钠盐通常不是有害的，但它可以制约医疗原因盐的摄入饮食的某些人。 不同的物理，地质，生物环境与地下水污染与地表水污染相比是显著的。在后者中，流量和氧气和阳光可用液压，随着速度的过程中污染物的稀释和扩散发生，明显不同于地下水，在污染物降解菌的机会通常局限于土壤或几英尺以下。此外，通过何种渠道地下水运动是非常小的和可变的。由此，显而易见的是，移动速度大大降低，除非，也许，在大的解决渠道内石灰石，以及分散和稀释的机会是非常有限的。此外，地下水通常缺乏氧气，这是造成好氧微生物的种类有帮助但这可能提供了一个“幸福之家”厌氧品种。 大多数土壤和岩石物理过滤出固体的能力，包括污染的固体，是公认的。然而，这种能力会随不同的大小，形状，和滤料颗粒的安排，在选定的沙子和其他材料在水过滤厂使用证明。也知道，但也许不那么普遍，是粘土和其他矿物捕获和交换的一些元素和化合物的能力时，他们游离在溶液中的正或负电荷的元素或化合物。这样的交流，随着吸附和沉淀过程中，污染物的捕获是重要的。这些过程有能力定义的单位是可逆的。他们也可以很容易地在设计设施正确的污染问题所依托的地质环境，土壤和岩石忽视治疗；这种疏忽可能造成地下水污染。这是特别重要的在污水土地应用。 很多猜测，争论，研究发生的地下水污染。地下水污染的主要关注的是化学元素，化合物的引入，和微生物，不含水层，可用于饮用水或是自然发生的，不仅因为该含水层的降解也因为在检测的难度，长期居住，和难度和费用含水层恢复。强有力的论点是，任何废物或可能的污染物应允许进入地下水系统的任何部分。这是一个不可能实现的梦想。相反，答案在于更多的了解自然过程处理废弃物的保证时，土壤和岩石是不能够处理，存储，或回收废物，我们可以发展过程使污染物处理，储存，或可回收。 Extracting and distinguishing environmental change information with high resolution form groundwater and sediments of groundwater system has been the major trend of groundwater sciences towards environmental sciences, This is very useful for forecasting environmental change.4从地下水及其沉积物中提取高分辨率的环境变化信息，实现对环境变化的预警功能是地下水科学向环境科学延伸的重要方向。5而随着全球淡水资源紧缺的形势不断恶化，全球环境变化，特别是全球气候变化对地下水资源的影响成为水文地质研究的新课题。5 With fresh water shortage increasingly serious, the research on effect of globle environmental change, especially globle climate change in groundwater resource has become a new area for hydrogeological research. 4depleted in K and SO4 井的出水量与含水层的渗透系数成正比。 Well water yield is proportional to the transmissivity of a aquifer. 1、分布在这个深层碳酸岩含水层中的地下热水的温度是60℃-90℃。 2、Temperature of the thermal groundwater in the deep-seated carbonate aquifer occurring in this area ranges from 60℃ 3、所有观测井水位的季节性波动可以用研究区降水量的季节性变化来解 4、Seasonal fluctuations in water table in observation wells are interpreted by seasonal changes of/in precipitation in study areas.

英语翻译专业必翻经典文章英文原文参考译文

文档简介 一，英语翻译经典文章之英文原稿二，中文翻译：这篇英语文章的最好翻译版本！不是俺说的，是俺老师说哒！！ 英文原稿Brian It seems my only request (“please, let me sleep”) is not clear enough, so I made this simple table that can help you when you’re in doubt. Especially during the night

中文翻译小子： 我只想好好地睡觉，你不明白吗？！所以，我做了这个简表。当你不知道怎么办时，特 别是在晚上的时候，你可以看看它。 具体情况行动指南 1，我正在睡觉禁止进入 2，你不确定我是否睡觉，你想搞清楚管你“鸟”事；禁止进入 3，你嗑了药，想奔向我的床你他妈的滚远点 4，你在youtube上看了一个超赞的视频，禁止进入；在脸书上把链接发给我想让我看看 5，就算第三次世界大战开始了管我屁事，他妈的别进来 6，你和你的基友们想和我“玩玩”抱歉，直男一枚。不要碰我的任何东西，门都别碰 7，你想整理我的房间我谢谢你了！我自己会打扫 8，普京宣布同性婚姻合法化终于等到“它”！还好你没放弃！还是不要来我房里！ 9，我不在家进我房间，想都别想 10，白天，我在家。你敲了门，我说“请进” 你可以进来了 福利放送！！

如果你已经看到了这里，那么说明你应该是英文爱好者哦。 下面有一些非常实用，我精心整理的英文资料，你一定用得到！快去看看吧！ 一，最常用英语翻译政治文体句型总结大全完美版 二，英文合同翻译最常用句型总结专业版 三，英语毕业论文提纲模板优秀完整详细无敌版

土木工程专业英语课文原文及对照翻译

土木工程专业英语课文原 文及对照翻译 Newly compiled on November 23, 2020

Civil Engineering Civil engineering, the oldest of the engineering specialties, is the planning, design, construction, and management of the built environment. This environment includes all structures built according to scientific principles, from irrigation and drainage systems to rocket-launching facilities. 土木工程学作为最老的工程技术学科，是指规划，设计，施工及对建筑环境的管理。此处的环境包括建筑符合科学规范的所有结构，从灌溉和排水系统到火箭发射设施。 Civil engineers build roads, bridges, tunnels, dams, harbors, power plants, water and sewage systems, hospitals, schools, mass transit, and other public facilities essential to modern society and large population concentrations. They also build privately owned facilities such as airports, railroads, pipelines, skyscrapers, and other large structures designed for industrial, commercial, or residential use. In addition, civil engineers plan, design, and build complete cities and towns, and more recently have been planning and designing space platforms to house self-contained communities. 土木工程师建造道路，桥梁，管道，大坝，海港，发电厂，给排水系统，医院，学校，公共交通和其他现代社会和大量人口集中地区的基础公共设施。他们也建造私有设施，比如飞机场，铁路，管线，摩天大楼，以及其他设计用作工业，商业和住宅途径的大型结构。此外，土木工程师还规划设计及建造完整的城市和乡镇，并且最近一直在规划设计容纳设施齐全的社区的空间平台。 The word civil derives from the Latin for citizen. In 1782, Englishman John Smeaton used the term to differentiate his nonmilitary engineering work from that of the military engineers who predominated at the time. Since then, the term civil engineering has often been used to refer to engineers who build public facilities, although the field is much broader 土木一词来源于拉丁文词“公民”。在1782年，英国人John Smeaton为了把他的非军事工程工作区别于当时占优势地位的军事工程师的工作而采用的名词。自从那时起，土木工程学被用于提及从事公共设施建设的工程师，尽管其包含的领域更为广阔。 Scope. Because it is so broad, civil engineering is subdivided into a number of technical specialties. Depending on the type of project, the skills of many kinds of civil engineer specialists may be needed. When a project begins, the site is surveyed and mapped by civil engineers who locate utility placement—water, sewer, and power lines. Geotechnical specialists perform soil experiments to determine if the earth can bear the weight of the project. Environmental specialists study the project’s impact on the local area: the potential for air and