青岛科技大学2011年硕士研究生入学考试基础英语试题

青岛科技大学

二○一一年硕士研究生入学考试试题

考试科目：基础英语

注意事项：1．本试卷共4道大题（共计73个小题），满分150分；

2．本卷属试题卷，答题另有答题卷，答案一律写在答题卷上，写在该试题卷上或草纸上均无效。要注意试卷清洁，不

要在试卷上涂划；

3．必须用蓝、黑钢笔或签字笔答题，其它均无效。

﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡

Part I Vocabulary and Grammar (30 points)

1. When he ______ all the newspapers, he’ll go home.

a. sell

b. has sold

c. will have sold

d. will be sold

2. The machine starts the moment the button ______.

a. will be pressed

b. is pressed

c. has pressed

d. has been pressed

3. Now that you ______, what are you going to do?

a. return

b. are returning

c. have returned

d. returned

4. I had hoped Mr. Smith ______ me an early reply.

a. would give

b. gave

c. to give

d. giving

5. Please be sure to call me the next time you ______.

a. will come

b. would come

c. come

d. shall come

6. He went on foot, but he ______ by bus.

a. should go

b. could have gone

c. ought have gone

d. could be gone

7. “Time is running out, ______?”

a. hadn’t we better got start

b. hadn’t we better get start

c. hadn’t we better get started

d. hadn’t we better got started

8. Were it not for the debts, we ______ all right.

a. would be

b. would have been

c. were

d. are

9. When Joyce was told the whole story, she ______ in the film.

a. ceased interest

b. ceased being interested

c. ceased interested

d. ceased to interest

10. We often hear about airplanes ______ because of technical faults.

a. delaying

b. being delayed

c. be delayed

d. to be delayed

11. Revolution means ______ the productive forces.

a. to liberate

b. liberate

c. liberated

d. liberating

12. Why do you stand and watch the milk ______ over?

a. boiling

b. boiled

c. to boil

d. being boiled

13. A phone call sent him ______ to the hospital.

a. hurry

b. hurrying

c. to hurry

d. hurried

14. They want the power station ______ as soon as possible.

a. to set up

b. to be set up

c. being set up

d. to have been set up

15. Once ______ oxygen, the brain dies.

a. deprived of

b. depriving of

c. having deprived of

d. deprived

16. Every means ______ tried but without much result.

a. has been

b. have been

c. are

d. is

17. The young in spirit ______ the vital forces in our society.

a. is

b. are

c. has been

d. have been

18. Rarely ______ such a silly thing.

a. have I heard of

b. I have been heard of

c. have I been heard of

d. I have heard of

19. He knows little of mathematics, ______ of chemistry.

A. as well as b. and still less c. no less than d. and still more

20. Five minutes earlier, ______ we could have caught the last train.

a. or

b. but

c. and

d. so

21. He works too hard. That is ______ is wrong with him.

a. that which

b. that what

c. what

d. the thing that

22. Scarcely was George Washington in his teens ______ his father died.

a. than

b. as

c. while

d. when

23. Electricity power is transmitted from power plant to places ______.

a. that it is needed

b. to which it is needed

c. where it is needed

d. when it is needed

24. That terrible noise is ______ me mad.

a. putting

b. setting

c. driving

d. turning

25. All the rooms have ______ carpets, which are included in the price of the house.

a. adapted

b. designed

c. equipped

d. fitted

26. Is this a good camera? Can it take color ______?

a. portraits

b. filmshows

c. pictures

d. paintings

27. His advice to wear white clothes in a hot, sunny climate was followed.

This ______ helped people to be cooler.

a. demand

b. recommendation

c. invention

d. request

28. I just have a few household ______ to cope with and then I’ll be free

to come out with you.

a. assignments

b. charges

c. chores

d. errands

29. His breaking of the rules set a dangerous ______.

a. custom

b. precedent

c. practice

d. usage

30. They had dug out an ice cave to provide ______ for the night.

a. safety

b. refuge

c. retreat

d. shelter

Part II Reading Comprehension (40 points)

Read the article carefully and answer the questions that follow in Section A, B, C, and D.

CIVILIZATION & HISTORY

1 Most of the people who appear most often and most gloriously in the history books are great conquerors and generals and soldiers, whereas the people who really helped civilization forward are often never mentioned at all. We do not know who first set a broken leg, or launched a seaworthy boat, or calculated the length of the year, or manured a field, but we know all about the killers and destroyers. People think a great deal of them, so much so that on all the highest pillars in the great cities of the world you will find the figure of the conqueror or a general or a soldier. And I think most people believe that the greatest countries are those that have beaten in battle the greatest number of other countries and ruled over them as conquerors. It is just possible they are, but they are not the most civilized. Animals fight; so do savages; hence to be good at fighting is to be good in the way in which an animal or a savage is good, but it is not to be civilized. Even being good at getting other people to fight for you and telling them how to do it most efficiently----this, after all, is what conquerors and generals have done ----is not being civilized. People fight to settle quarrels. Fighting means killing, and civilized peoples ought to be able to find some way of settling their disputes other than by seeing which side can kill off the greater number of the other side, and then saying that that side which has killed most has won. And not only has won, but, because it has won, has been in the right. For that is what going to war means; it means saying that might is right.

2 That is what the story of mankind has on the whole been like. Even our own age has fought the two greatest wars in history, in which millions of people were killed or mutilated. And while today it is true that people do not fight and kill each other in the streets----while, that is to say, we have got to the stage of keeping the rules and behaving properly to each other in daily life---nations and countries have not learnt to do this yet, and still behave like savages.

3 But we must not expect too much. After all, the race of men has only just started. From the point of view of evolution, human beings are very young children indeed, babies, in fact, of a few months old. Scientists reckon that there has been life of some sort on the earth in the form of jelly-fish and that kind of creature for about twelve hundred million years; but there have been men for only one million years, and there have been civilized men for about eight thousand years at the outside. These figures are difficult to grasp; so let us scale them down. Suppose that we reckon the whole past of living creatures on the earth as one hundred

years; then the whole past of man works out at about one month, and during that month there have been civilizations for between seven and eight hours. So you see there has been little time to learn in, but there will be oceans of time in which to learn better. Taking man’s civilized past at about seven or eight hours, we may estimate his future, that is to say, the whole period between now and when the sun grows too cold to maintain life any longer on the earth, at about one hundred thousand years. Thus mankind is only at the beginning of its civilized life, and as I say, we must not expect too much. The past of man has been on the whole a pretty beastly business, a business of fighting and bullying and gorging and grabbing and hurting. We must not expect even civilized peoples not to have done these things. All we can ask is that they will sometimes have done something else.

Section A

Answer the following questions.

31.This essay can be divided into two main parts, although it has three

paragraphs. Where do you think the second part begins----at the beginning of the second paragraph or of the third?

32.Which of the following sentences gives the best summary of the first

part?

(a) Some of the people who helped civilization forward are not

mentioned at all in history books.

(b) Conquerors and generals have been our most famous men, but they

did not help civilization forward.

(c) It is true that people today do not fight or kill people in the streets.

33.Which of the following sentences best summarizes the second part of

the essay?

(a) In order to understand the long periods of history, we have to scale

them down to shorter periods.

(b) The past of man has been on the whole a pretty beastly business.

(c) Mankind is only at the beginning of civilized life; so we must

expect a great deal of civilization at this stage.

34. What the examples does the author give of people who really helped

civilization forward?

35. In what way are great soldiers similar to animals?

36. Are people today more civilized in any way than in the past? If so, in

what way?

37. What were the earliest forms of life on this earth?

38. When will there be no life on this earth, according to the author?

39. The word ‘figure’ is both used in the first paragraph and in the third.

Does it have the same meaning in both places? If not, what are its

two different meanings?

40. Is the author hopeful about the figure of civilization? How do you know?

Section B

Answer the questions by choosing the best alternative (a, b, c, d) under each.

41. In the first sentence, the author says that______.

(a) most history books were written by conquerors, general and soldiers.

(b) no one who really helped civilization forward is mentioned in any

history books.

(c) history books tell us far more about conquerors and soldiers than about those

who helped civilization forward.

(d) conquerors, generals and soldiers should not be mentioned in history books.

42. On all the highest pillars in the great cities of the world, we find

_____.

(a) the figure of the same conqueror or general or soldier.

(b) the figure of some conqueror or general or soldier.

(c) a figure representing the number of conquerors, generals and

soldiers in that country.

(d) the figure of a person who helped civilization forward.

43. Most people believe that the greatest countries are _____.

(a) those that built the highest pillars.

(b) those that were beaten in battle by the greatest number of other

countries.

(c) those that were ruled by the greatest number of conquerors.

(d) those that won greatest number of battles against other countries.

44. In the author’s opinion, the countries that ruled a large number of

other countries are _____.

(a) certainly not the greatest in any way.

(b) neither the greatest not the most civilized

(c) possibly the most civilized but not the greatest.

(d) possibly the greatest in some sense but not the most civilized.

45. The author says that civilized people _____.

(a) should not have any quarrels to settle.

(b) should not fight when there are no quarrels to settle.

(c) should settle their quarrels without fighting.

(d) should settle their quarrels by seeing which side can kill off the greater number of the other side.

46. ‘That is what going to war means; it means saying that might is right.’ The meaning of this sentence is that _____.

(a) those who fight believe that the winner is right and the loser wrong.

(b) only those who are powerful should go to war.

(c) those who are right should fight against those who are wrong.

(d) in a war only those who are powerful will win.

47. ‘Even our own age has fought the two greatest wars in history.’ The author says this in order to show that our own age is _____.

(a) different from those of the past.

(b) not much better than those of the past.

(c) much better than those of the past.

(d) not so civilized as those of the past.

48. ‘From the point of view of evolution, human beings are very young children indeed.’ The author says this in order to show that _____.

(a) very young children are not civilized.

(b) evolution does not help civilization forward.

(c) human beings have learnt very little in a very long time.

(d) human beings are still at the beginning of their life on this earth.

49. The scale which the author uses for representing time is _____.

(a) one month = one million years.

(b) one hundred years = eight thousand years.

(c) one year = one million years.

(d) one month = twelve hundred million years.

50. ‘We must not expect even civilized peoples not to have done these

things.’ This

suggests that _____.

(a) those who have done any fighting and bullying cannot be considered

civilized.

(b) there is nothing wrong if civilized people do some fighting and

bullying.

(c) even civilized people have done some fighting and bullying.

(d) civilized people have never done any fighting and bullying. Section C

Find single words in this essay which have roughly the meanings given below.

51.uncivilized person

52.fertilized

53.image of a person made from stone, metal etc.

54.quarrel or difference of opinion

55.strength or power

56.all human beings considered together

57.boneless sea-animal which evolved very early on

58.count or estimate

59.as bad as animals in behaviors

60. causing pain

Section D

Match the words given under A with the meaning given under B. list B has some extra items.

A B

61. grab (a) gradual development

62. mutilate (b) honorable, famous

63. seaworthy (c) a straight, tall support

64. reckon (d) good at producing results

65. conqueror (e) fit to sail in the sea

(f) think (on the basis of a calculation)

66. glorious (g) get hold of

67. bully (h) one who defeats another country

68. pillar (i) be cruel to someone weaker

69. evolution (j) destroy or injure an important part

70. efficient (k) one who gets other people to fight for him

(l) put things on a smaller scale

(m) an officer of the navy

Part III Translation (50 points)

Section A

Translate the underlined part of the Chinese text into English.

人生里有离别也是好事。如果没有离别，人就不能真正珍惜相聚的时刻；如果没有离别，人间就再也没有重逢的喜悦。离别从这个观点看，是好的。

我们总认为相聚是幸福的，离别便不免哀伤。但这幸福是比较而来的，若没有哀伤做衬托，幸福的滋味也就不能体会了。再从深一点的观点来思考，这世间有许多的“怨僧会”，在相聚时感到重大痛苦的人比比皆是，如果没有离别这件好事，他们不是要永受折磨，永远沉沦于悔恨之中吗？

幸好，人生有离别。

因相聚而幸福的人，离别是好，使那些相思的泪都化成甜美的水晶；因相聚而痛苦的人，离别最好，雾散云消看见了开阔的蓝天。可以因缘离散，对处在苦难中的人，有时候正是生命的期待与盼望。聚与散、幸福与悲哀、失望与希望，假如我们愿意品尝，样样都有滋味，样样都是生命中不可或缺的。

Section B

Translate the underlined part of the English text into Chinese.

I have never had much patience with the writers who claim from the reader an effort to understand their meaning. You have not only to go to the great philosophers to see that it is possible to express with lucidity the most subtle reflections…. There are two sorts of obscurity that you find

in writers. One is due to negligence and the other to willfulness. People often write obscurely because they have never taken the trouble to learn to write clearly. This sort of obscurity you find too often in modern philosophers, in men of science, and even in literary critics. Here it is indeed strange. You would have thought that men who passed their lives in the study of the great masters of literature would be sufficiently sensitive to the beauty of language to write if not beautifully at least with perspicuity. Yet you will find in their works sentence after sentence that you must read twice to discover the sense. Often you can only guess at it, for the writers have evidently not said what they intended.

Another cause of obscurity is that the writer is not himself quite sure of his meaning. He has a vague impression of what he wants to say, but has not, either from lack of mental power or from laziness, exactly formulated it in his mind and it is natural enough that he can not find a precise expression for a confused idea. This is due largely to the fact that many writers think, not before, as they write. The pen originates the thought. The disadvantage of this-- and indeed it is a danger against which the author must be always on his guard--is that there is a sort of magic in the written word. The idea acquires substance by taking on a visible nature, and then stands in the way of its own clarification.

Part IV Writing (30 points)

Being convenient, fast and inexpensive, e-mails have become more and more popular. Some people believe that conventional mails will gradually disappear. However, some people prefer conventional mails to e-mails because they think the former is more personal, friendly and valuable. Write an essay of approximately 300 words on this issue to state your own opinions.

华慧考博网-考博第一品牌（https://www.wendangku.net/doc/13766519.html,）

考博咨询QQ：4006224468

编辑推荐：

考博英语辅导班：https://www.wendangku.net/doc/13766519.html,/classroom?t=1113.0考博英语专题https://www.wendangku.net/doc/13766519.html,/kaoboyingyu.html

考博英语怎么复习？https://www.wendangku.net/doc/13766519.html,/yingyu_fuxi.html 考博英语真题汇总专题https://www.wendangku.net/doc/13766519.html,/kaobo_zhenti. html

2016医学考博专题https://www.wendangku.net/doc/13766519.html,/yixue_kaobo.html

03青岛科技大学本科毕业设计(论文)撰写规范

青岛科技大学本科毕业设计（论文）撰写规范 为提高毕业设计（论文）质量，特对我校本科毕业设计（论文）撰写规范作如下规定： 一、内容要求 毕业设计（论文）一般应包括以下九个主要组成部分： 1.封面 采用全校统一制作格式，填写的内容为：论文题目、指导教师姓名、辅导教师姓名、学生姓名、学生学号、学生所在学院（部）、专业、班级、完成日期。 2.中文摘要 中文摘要应是毕业设计（论文）的中心内容，应具有独立性和自含性，即读者不需要阅读全文，就能获得必要的毕业设计（论文）信息。摘要内容涉及本项科研工作的目的和意义、研究方法、研究成果、结论。要注意突出毕业设计（论文）中具有创造性的成果和具有新见解的部分。 3.英文摘要 英文摘要应与中文摘要相对应。 4.目录 目录作为毕业设计（论文）的提纲，是其各组成部分的小标题，应简明扼要。 5. 毕业设计（论文）正文 毕业设计（论文）正文是主体，一般由引言（绪论、前言）开始，以结论（或讨论）结束。毕业设计（论文）的内容可因科研项目的性质不同而变化，一般可包括理论分析、计算方法、实验装置和测试方法，经过整理加工的实验结果与理论计算结果的比较分析和讨论，以及本研究方法与已有研究方法的比较等。人文社科类设计（论文）正文不少于8000字，理工科类设计（论文）正文及说明书不少于10000字。 6.参考文献 参考文献是撰写毕业设计（论文）时引用的有关图书资料。应按文中引用出现的顺序列全，附于文末。 7.附录 重要的测试结果、图表、程序等可列在附录中。 8.致谢 对给予各类资助、指导和协助完成研究工作以及提供各种条件的单位和个人表示感谢。致谢应实事求是，切忌滥用浮夸庸俗之词。 9. 外文资料翻译及原文 理工科学生要求一篇与本专业相关的外文参考文献翻译，字数不限。 二、撰写规范 1. 毕业设计（论文）封面一律由计算机打印，按统一要求进行装订。题目不宜超过33个汉字。模板中已定义好格式，直接输入即可。或输入后选择相应样式来格式化。 题目使用“封面论文题目”样式来格式化。 指导教师、辅导教师、学生姓名和学生学号使用“封面作者信息”样式来格式化。 学院（部）、专业和班级使用“封面作者单位”样式来格式化。 年、月和日使用“封面论文日期”样式来格式化。 2.中文摘要字数为300字左右,其内容次序为：题目、“摘要”二字、摘要正文、关键词（15个汉字左右）。 ⑴题目可以分成1或2行，使用“中文论文题目”样式来格式化。

机械设计大纲(青岛科技大学)

826机械设计考试大纲 青岛科技大学硕士研究生入学考试机械设计考试大纲 一、本《机械设计》考试大纲适用于报考青岛科技大学机械工程类专业及过程装备与控制工程专业的硕士研究生入学考试。《机械设计》对于机械类专业是一门具有承前启后作用的主干技术基础课程。要求考生掌握通用机械零件的设计方法，了解机械设计的一般规律，具有综合运用所学知识分析和解决实际问题的能力。 二、考试内容： 1．绪论 2．机械设计总论 3．机械零件的强度 4．摩擦、磨损及润滑概述 5．螺纹联接和螺旋传动 6．键、花键、无键联接和销联接 7．带传动 8．链传动 9．齿轮传动 10．蜗杆传动 11．滑动轴承 12．滚动轴承 13．轴 14．联轴器和离合器 15．弹簧 三、考试要求 1．绪论 了解本课程的研究对象、内容。 2．机械设计总论 了解机器的组成和设计机器的一般程序。了解机械零件的主要失效形式、设计准则以及机械零件材料的选用原则。了解机械零件的工艺性及标准化。对机械现代设计方法的新发展有所了解。 3．机械零件的强度 了解静强度和疲劳强度、材料的疲劳特性、单向稳定变应力和不稳定变应力以及复杂应力状态下的强度条件表达式。掌握影响机械零件疲劳强度的因素及接触应力计算公式。 4．摩擦、磨损及润滑概述 了解摩擦、磨损及润滑的基本知识。了解干摩擦、边界摩擦润滑机理及磨损曲线的意义。一般性了解润滑剂和添加剂的性能和应用。 5．螺纹联接和螺旋传动 掌握常用螺纹的类型及螺纹联接的主要类型和应用。能选用防松结构。掌握单个螺栓的强度计算，能对几种典型类型的螺栓组进行受力分析。了解改善螺纹联接强度的措施。了解螺旋传动的类型、特点和应用。了解滑动螺旋副材料及螺旋传动的设计计算。 6．键、花键、无键联接和销联接 了解键、花键和销联接的类型、特点和应用。掌握普通平键和花键的尺寸选择和强度校核。了解花键联接的类型、特点和应用。

大学英语入学考试试卷

B11. He didn’t keep on asking me the time any longer as he had had his watch . A. to repair B. repaired C.repairing D. repair C12. Grandma has no water, please ________ some for her. A. take B. carry C. fetch D. bring D13. Rarely _______ so difficult a problem. A. she could have faced with B. could have she faced with C. she could have been faced with D. could she have been faced with D14. This restaurant always _______ delicious dishes. A. gives B. offers C. have D. serves A15. There is _______ sugar. You needn’t go to buy any. A. plenty of B. a large number of C. a great many D. plenty B16. The factory has done good honour to the government and the people around so that visitors come to it ___________. A. in number B. in larger numbers C. to the number D. by number A17. There aren't many pandas ________ in the world today. A. alive B. living C. lively D. lived B18. Such electron tubes ________ in a radio set are also found in a TV set. A. that we use B. as we use C. as we use them D. that we use them A19. you don’t like him is none of my business A.What B.Who C.That D.Whether C20. He looked quite healthy though he was . A. in seventy B. in his seventy C. at seventies D. at the age of seventy C21. Please ______ me at the station on time. A. meeting B. to meet C. meet D. met B22. Jane, what do you think of Mr. Green? As ______ teacher, he ought to set _______ good example to the pupils. A. the ; a B. a ; a C. a ; the D. / the D23. Hao long has this bookshop been in business? 1982 A. After B. In C. From D.Since A24.Here’s my card. Let’s keep in A. Touch B. relation C.connection D.fiendship B25. Please telephone me half an hour _______. A. in charge B. in advance (提前) C. in time D. in front A26. Don’t get off the bus until it ________. A. has stopped B. stopped C. will stop D. shall stop A27. Two weeks allowed for making the necessary preparations. A. was B. were C. are D. have been B28. She is always the first __________to school. A. coming B. to come C. to have come D. having come A29. this book and tell me what you think of it. A.Look though(纵览) B.Look on C.Look into D.Look up A30. His report on the space exploration was really ________. A. exciting B. excited C. excitement D. excitedly C31. The roof fell he had time to dash into the room to save his baby . A. after B. as C. before D. until B32. He usually a bus to work instead of going by taxi. A. takes B. carries C. gets D. sits C33. An expert, together with some assistants, to help in the work. A. were sent B. are sent C. was sent D. have been sent A34. The three children looked after their sick mother__________. A. in return B. by turn C. in turn D. being done C35. Get to the top of hill, ______ you can see the whole city. A. or B. but C. and D. so Passage one The Internet has led to a huge increase in credit－card (信用卡) fraud.Your card information could even be for sale in an illegal web site（非法网站）. Web sites offering cheap goods and services should be regarded with care. On－line shoppers who enter their credit－card information may never receive the goods they thought they bought.The thieves then go shopping with your card number—or sell the information over the Internet. Computers hackers (黑客) have broken down security（安全）systems, raising questions about the safety of cardholder information. Several months ago, 25,000 customers of CD Universe, an on－line music retailer (零售商) , were not lucky. Their names, addresses and credit－card numbers were posted on a Web site after the retailer refused to pay US $157,828 to get back the information. Credit－card firms are now fighting against on－line fraud. Mastercard is working on plans for Web－only credit card, with a lower credit limit. The card could be used only for shopping on－line. However, there are a few simple steps you can take to keep from being cheated (欺骗). Ask about your credit－card firm’s on－line rules: Under British law, cardholders have to pay the first US $78 of any fraudulent (欺骗性的) spending. And shop only at secure sites; Send your credit－card information only if the Web site offers advanced secure system. If the security is in place, a letter will appear in the bottom right－hand

青岛科技大学本科毕业设计(论文) 过程管理办法

青岛科技大学 本科毕业设计(论文) 过程管理办法 为提高本科毕业设计（论文）质量，加强过程管理，特制定本办法。 一、毕业设计（论文）的选题 1.毕业设计（论文）的选题必须符合专业培养目标的要求,应遵循专业性、典型性和完整性原则。 2.选题的范围和深度应符合学生的实际情况。工科类专业的毕业设计（论文）课题要尽量能与生产、科研实际相结合，文、理科类专业毕业论文要尽量与应用结合。 3.选题应具有一定的新颖性、先进性和创新性，同时应考虑可行性，以中、小型课题为宜，难度适当，保证学生在规定的时间内工作量饱满。 4.选题应遵循因材施教的原则,根据学生的不同情况适当安排不同的题目。 5.毕业设计（论文）选题应遵循“一人一题”的原则。多人同题的，其方向应有所不同，内容不能相同，必须明确学生应独立完成的任务，并在题目上加以区别。 6.自拟的设计课题，各学院（部）可根据本单位实际条件，经指导教师同意，并经院长（主任）批准后，方可实施。 7.教师和学生之间采用双向选择方式确定。在双方无法自愿达成时，由学院指定指导关系。

8.毕业设计（论文）选题工作应在第七学期末进行。 9.课题一经确定，不能随意更改，如确需变动，应重新履行审批手续。 二、任务书 1.毕业设计（论文）任务书由指导教师根据各课题的具体情况填写，经教研室（系）论证，由院长（主任）批准后在第八学期第一周内向学生公布。 2. 学生毕业设计（论文）完成的情况必须与任务书内填写的内容相一致。 3.任务书上课题类型是指：理论研究、实践研究、应用（实务）研发、开发研究、工艺设计、工程设计、设备设计、软件设计、艺术设计、工业设计、服装设计、绘画创作、广告设计、指定问题研究。 4.任务书上的课题来源是指：国家资助课题、省（市）资助项目、企业（公司）资助、学校资助项目、自选项目、储备项目。 三、开题 学生在充分调研，理解工作目的后，需向指导教师提交一份开题报告。开题应在选题后1—2周之内完成。主要内容包括：目前国内外研究进展概述（立题依据），主要研究内容，设计方案及思路，毕业设计（论文）工作计划安排等。 四、毕业设计（论文）撰写 毕业设计（论文）应立论明确，推理严谨，数据可靠，层次分明，文字简练，依据《青岛科技大学本科毕业设计（论文）撰

青岛科技大学2011机械设计真题

青岛科技大学 二○一一年硕士研究生入学考试试题 考试科目：机械设计 注意事项：1．本试卷共5道大题（共计37个小题），满分150分； 2．本卷属试题卷，答题另有答题卷，答案一律写在答题卷上， 写在该试题卷上或草纸上均无效。要注意试卷清洁，不要在 试卷上涂划； 3．必须用蓝、黑钢笔或签字笔答题，其它均无效。 ﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡﹡ ﹡﹡﹡﹡﹡﹡﹡ 一、是非题：正确的以“T”表示，错误的以“F”表示(每小题3分，共30 分) 1．螺旋传动中的螺母、滑动轴承中的轴瓦、蜗杆传动中的蜗轮，多采 用青铜材料，这主要是为了提高导热能力。 2．齿轮外啮合传动中，将渐开线圆柱齿轮齿面间的凸--凸接触，改为 凸--凹接触（如双圆弧齿轮）,有利于提高其表面接触强度。 3．螺纹的大径，在标准中定为公称直径。 4．V带剖面中两工作面的夹角为40°，所以V带轮轮槽的工作面的夹角 也是40°。 5．与滚子链相比，齿形链有传动平稳、噪声小，效率高，承受冲击载 荷能力较好和轮齿受力较均匀的优点。 6．直齿圆锥齿轮强度计算中，是以大端当量直齿圆柱齿轮为计算依据 的。 7．蜗杆传动的传动比等于蜗轮、蜗杆的直径比。 8．滑动轴承材料中，多孔质粉末冶金材料有自润滑性能。 9．自行车前轴属于固定心轴。 10．联轴器与离合器的主要作用是缓和冲击和振动。 2、选择填空(每小题3分，共30分) 1．在机械传动中，理论上能保证瞬时传动比为常数的是 。 Ａ.带传动 Ｂ.链传动 Ｃ. 摩擦轮传动 Ｄ. 齿轮传动 2．运动粘度是动力粘度与同温下润滑油 的比值。

Ａ．密度Ｂ．质量Ｃ．压力Ｄ．速度 3．当两个被联接件都比较薄，在被联接件上宜制成通孔，通孔的加工精度要求低，结构简单，装拆方便，往往采用 。 A．双头螺柱联接 B．绞制孔用螺栓联接 C．普通螺栓联接 D．螺钉联接 4．键的截面尺寸（键宽×键高）主要根据 来选择。 Ａ．轴的直径 Ｂ．传递功率的大小 Ｃ．轮毂的长度 Ｄ．传递转矩的大小 5．带传动的主要失效形式之一是带的 。 Ａ．松弛Ｂ．颤动Ｃ．疲劳破坏Ｄ．弹性滑动6．一材料为45钢，要求精度为6级的硬齿面齿轮，其制造工艺过程可在齿坯加工后顺序进行 。 A．滚齿、磨齿、表面淬火 B．滚齿、表面淬火、磨齿 C．渗碳淬火、滚齿、磨齿 D．渗碳淬火、磨齿、滚齿 7．蜗杆分度圆直径计算公式为 。 Ａ．Ｂ．Ｃ．Ｄ． 8. 设计滚动轴承合理的配置时，对轴承跨距较大且工作温度较高的 轴，为了适应轴有较大的热伸长量，应考虑 。 A．双支点各单向固定 B.一支点双向固定，另一端支点游动 C. 两端游动支承 D．轴颈与轴承内圈采用很松的配 合 9. 增大轴在截面变化处的过渡圆角半径，可以 。 A．使零件的轴向定位比较可靠 B. 降低应力集中，提高轴的疲劳强度 C. 使轴的加工方便 10．轴的弯扭合成校核计算应力公式中，折合系数是考虑对的。 Ａ．大小不同Ｂ．方向不同Ｃ．类型不同Ｄ．循环特性不 同 3、 简答题（每小题10分,共30分） 1. 何谓摩擦、磨损和润滑？它们之间的相互关系如何？ 2．滑动轴承形成动压油膜的必要条件是什么? 其实际工作中处于什么润滑状态? 3．带传动的打滑经常在什么情况下发生？打滑多发生在大轮上还是小轮上？选择标准V带型号的主要依据是什么？

大学英语模拟考试试题

郑州大学远程教育学院入学测试机考 专升本大学英语模拟题 1、One of my teeth is so ______ that it is going to be missing soon.（） A．lose B．loose C．loss D．lost 标准答案：B 2、—How about taking a walk —Oh, I think it’s ______ cold for a walk. （） A．very much B．too much C．much too D．so much 标准答案：C 3、You are supposed to write your composition every ______ line.（） A．one B．a C．other D．another 标准答案：C

4、After living for years in a big city, they found it difficult to settle ______ in a town.（） A．for B．at C．up D．down 标准答案：D 5、The reason for my absence was ______ I had fallen ill.（） A．why B．because C．for D．that 标准答案：D 6、Only with your help, such difficulties in the field. A. can we overcome B. we can overcome C. should we overcome D. We should overcome 标准答案：A 7、The ski resorts are usually crowded. There are many people skiing. A. enjoy B. that want C. who enjoy D. want

大学英语模拟考试试题

大学英语模拟考试试题 Company number：【0089WT-8898YT-W8CCB-BUUT-202108】

郑州大学远程教育学院入学测试机考 专升本大学英语模拟题 1、One of my teeth is so ______ that it is going to be missing soon.（） A．lose B．loose C．loss D．lost 标准答案：B 2、—How about taking a walk —Oh, I think it’s ______ cold for a walk. （） A．very much B．too much C．much too D．so much 标准答案：C 3、You are supposed to write your composition every ______ line.（） A．one B．a C．other D．another 标准答案：C

4、After living for years in a big city, they found it difficult to settle ______ in a town.（） A．for B．at C．up D．down 标准答案：D 5、The reason for my absence was ______ I had fallen ill.（） A．why B．because C．for D．that 标准答案：D 6、Only with your help, such difficulties in the field. A. can we overcome B. we can overcome C. should we overcome D. We should overcome 标准答案：A 7、The ski resorts are usually crowded. There are many people skiing. A. enjoy B. that want C. who enjoy D. want 标准答案：C 8、Would you like to the United States A. trip B. voyage C. going

青岛科技大学毕业论文模板

科技大学本科毕业设计（论文）撰写规 （理工类） 为提高毕业设计（论文）质量，特对我校本科毕业设计（论文）撰写规作如下规定： 一、容要求 毕业设计（论文）一般应包括以下八个主要组成部分： 1.封面 采用全校统一制作格式，填写的容为：论文题目、指导教师姓名、辅导教师姓名、学生姓名、学生学号、学生所在学院（部）、专业、班级、完成日期。 2.中文摘要 中文摘要应是毕业设计（论文）的中心容，应具有独立性和自含性，即读者不需要阅读全文，就能获得必要的毕业设计（论文）信息。摘要容涉及本项科研工作的目的和意义、研究法、研究成果、结论。要注意突出毕业设计（论文）中具有创造性的成果和具有新见解的部分。 3.英文摘要 英文摘要应与中文摘要相对应。 4.目录 目录作为毕业设计（论文）的提纲，是其各组成部分的小标题，应简明扼要。 5.毕业设计（论文）正文

毕业设计（论文）正文是主体，一般由引言（绪论、前言）开始，以结论（或讨论）结束。毕业设计（论文）的容可因科研项目的性质不同而变化，一般可包括理论分析、计算法、实验装置和测试法，经过整理加工的实验结果与理论计算结果的比较分析和讨论，以及本研究法与已有研究法的比较等。设计（论文）正文及说明书不少于10000字。 6.参考文献 参考文献是撰写毕业设计（论文）时引用的有关图书资料。应按文中引用出现的顺序列全，附于文末。 7.附录 重要的测试结果、图表、程序等可列在附录中。 8.致 对给予各类资助、指导和协助完成研究工作以及提供各种条件的单位和个人表示感。致应实事，切忌滥用浮夸之词。 二、撰写规 1.毕业设计（论文）封面一律打印，按统一要求进行装订。题目一般不宜超过30个汉字。模板中已定义好格式，直接输入即可。或输入后选择相应样式来格式化。 题目使用“封面论文题目”样式来格式化。 指导教师、辅导教师、学生姓名和学生学号使用“封面作者信息”样式来格式化。 学院（部）、专业和班级使用“封面作者单位”样式来格式化。

青岛科技大学信息工程微机原理习题资料

一、填空题 1、十进制数25转换为二进制数是11001B，转换为八进制数是310，转换为十六进制数是 19H 。 2、十进制数-68的原码是11000100 ,反码是10111011,补码是10111100 。（用八位二进制编 码表示）。 3、十进制数208.625转换成16进制数为D0.AH。 4、十进制负数-38原码是10100110，反码是11011001，补码是11011010。（用八位二进制编 码表示）。 5、十进制数42.625转换为二进制数是101010.101B ，转换为八进制数是52.50 ，转换为 十六进制数是2A.AH 。 7、计算机存储信息的最小单位是二进制的位，1个字节等于8个二进制位，1KB等于1024个字节。 8、三态输出电路可以有3种工作状态，即0、1和高阻态。 9、程序计数器用于存储计算机下一条要执行的指令的地址，可以从0开始计数（每次加1或加一个固 定的数），以支持程序的顺序执行；也可以将外部数据装入其中，以支持程序跳转操彳— 10、CPU的控制器通常由三个部分组成，即环形计数器、指令译码器和控制矩阵________ 。 11、8086CPU的数据总线是16位的，8088CPU的数据总线是8位的。 12、8086CPU的指令队列为6_个字节，8088CPU的指令队列为4_个字节。 13、8086CPU的4个段地址寄存器分别是CS、DS、ES SS。 14、8086CPU从功能上可分为两部分，即总线接口部件BIU和执行部件EU。 15、8086/8088CPU设有_6_个状态标志位，_3_个控制标志位；当执行比较指令时，如果运算结 果为零，则标志位_ZF_置1;如果运算结果的最高位为1，则标志位_SF_g 1。 16、存储器是计算机中用于存储程序和数据的装置。 17、n位地址码可以表示 2 n个地址。 18、8086/8088系统中存储器按字节编址，可寻址的存储器空间为1MB。8086/8088系统把 存储空间分成若干个逻辑段，每个逻辑段容量w 64KB。16—个字节的存储空间称为1节。 19、8086的地址有20位,那么它的可寻址空间为1024 K ，其中每个段的最大长度为64 K 。 20、m个存储单元、每个存储单元n位的存储器通常表示为mx n的存储器。例如：16X 8存储 器表示有血个存储单元，每个存储单元8位，它有_4—条地址线，_8_条数据线。 21、逻辑地址由段基址和偏移地址组成，将逻辑地址转换为物理地址的公式是物理地 址=段基址x 16+偏移地址。 22、逻辑地址为5678h:2345h，其物理地址是58AC5H ___________________ 。 23、8086系统中，一个总线周期至少包括一4__个时钟周期。 24、8086/8088CPU有最大和最小两种工作模式。 25、8086复位后如下寄存器的内容为：CS= FFFF H,IP= 0000 H 。 26、8086/8088中，从产生中断的方法来分，中断可以分为两类：一类是硬件中断，另一类是软件中断。 27、8086/8088的硬件中断可以分为两类：一类叫非屏蔽中断，另一类叫可屏蔽中断。 28、中断向量是中断服务程序的入口地址,每一个中断向量占个存储单元其中前两个单元存放中断子程序入口地址的偏移量（IP），后两个单元存放中断子程序入口地址的段地址（CS）。 29、8086CPU的中断类型码与中断向量存放地址之间的关系为：中断向量的段地址CS=0000H 中断向量的偏移量IP=中断类型码*4。 30、8086微机系统中的一个中断向量占4个存储单元，假定某中断对应的中断向量存放在 0000:002C H ;那么该中断向量对应的中断类型号为0B H，若该向量对应的中断处理子程序放 在0080: 0402H开始的内存区域中，则按照地址由低到高的顺序写出从内存0002C处起始的存储 单元的内容为02H 、04H 、80H 、00H 。 31、—是让计算机完成某种操作的命令，指令的集合 ___________ 称作指令系统。 32、计算机能够直接识别的二进制形式指令称为机器指令，用助记符表示的指令称为汇编 指令。

毕业设计的主要任务及目标 毕业设计的主要内容

青岛科技大学本科毕业设计论文任务书毕业设计论文题目个人所得税税制模式浅析及改革建议题目类型理论研究课题来源自选项目院部经济与管理学院指导老师张玉专业财务管理班级051班学生学号0511040111 学生姓名刘小莹毕业设计论文的主要任务及目标针对论文的选题查阅大量的国内外相关资料和文献充分了解国内的现状深入分析我国在个人所得税这一方面的不足进而提出对改革完善个人所得税有利的可行建议。通过毕业论文的设计写作培养和提高学生对所学理论、知识和技能的运用能力加强学生创新意识、创新能力和创新精神的培养同时培养学生实事求是的科学精神、严肃认真的工作态度、良好的团体协作精神和优秀的职业道德修养。毕业设计论文的主要内容我国现行税制是在向社会主义市场经济的转轨时期建立的具有一定的过渡性。随着社会主义市场经济体制的进一步发展和完善这套税制的弊端和不足也日益显露出来。我国的税制改革还将继续下去。本文主要针对个人所得税的税制模式问题结合我国的具体情况和国外的先进经验着重从四个方面展开论述首先介绍个人所得税的概念、理论来源及其税收制度的几种模式然后分析我国个人所得税税制模式的现状及弊端再结合当前经济形势提出如何完善个人所得税征收问题最后借鉴国外先进经验尤其是以家庭为纳税单位征收个人所得税的模式综合考虑我国的实际情况对个人所得税的税制模式改革提出建议。毕业设计论文的基本要求广泛收集关于个人所得税税制模式的现状、存在的问题及其完善措施的学术和现实资料熟练运用本学科常规研究方法进行整理、加工和分析使学生能够受到高级专门人才所必需的综合能力训练。根据课题的性质和要求写出开题报告独立完成所要求的论文写作工作。论文要求概念清楚内容正确条理分明语言流畅结构严谨紧扣改善个人所得税税制模式提出切实可行的对策。主要参考文献要求至少外文二篇中文三篇「1」秦强古炳伟.中越两国个人所得税比较及启示.涉外税务2006.10. 「2」金峰.我国个人所得税课税模式改革.统计与决策2007.1. 「3」卢剑灵.我国个人所得税后续改革中必须考虑的若干问题.税务与经济2006.4. 「4」罗祥轩安仲文徐国荣.对我国个人所得税调节

台湾大学入学考试中心2020年英文试题

台湾大学入学考试中心2020年英文试题 九十五学年度指定科目考试试题 一、词汇(10%) 零为止。未作答者，不给分亦不扣分。 1.Mastery of English _________ us with a very important tool for acquiring knowledge and information. (A)accesses (B) conveys (C) deprives (D) equips https://www.wendangku.net/doc/13766519.html,nguages change all the time. Many words tliat were found m Shakespeare s works are no longer in __________ use? (A)absolute (B) current (C) repetitive (D) valuable 3.Do not just sit and wait __________ for a good chance to come to you. You have to take the initiative and create chances for yourself. (A)consciously (B) passively (C) reasonably (D) subjectively 4.Identical twins have almost all of their genes in common, so any ___________ between them is in large part due to the effects of the environment. (A)adoption (B) familiarity (C) stability (D) variation 5.People believed in the _______ o f the judge, so they were shocked to hear that he was involved in the bribery scandal. (A)inferiority (B) integrity (C) intimacy (D) ingenuity 6.The discovery of the new vaccine is an important ________ in the fight against avian flu? (A)breakthrough (B) commitment (C) demonstration (D) interpretation 7.To avoid being misled by news reports, we should learn to ________ between facts and opinions. (A)distinguish (B) complicate (C) reinforce (D) speculate 8.After the big flood, the area was mostly __________ . with only one or two homes still clinging to their last relics? (A)condensed (B) deserted (C) excluded (D) removed 9.In his speech. Dr. Huang presented all the reports about the energy crisis to ___________ the need for developing new energy resources? (A)command (B) formulate (C) highlight (D) regulate 10.Hearing the art critic's bitter and __________comments on her new pauitmg, Molly started a heated argument with him. (A) outrageous (B) unreliable (C) urgent (D) glorious 二.综合测验(20%)

青岛科技大学机械设计2005-2010年真题

青岛科技大学2005年研究生入学考试试题 考试科目： 机械设计（A 卷）（答案全部写在答题纸上） 一、选择填空(每小题2分，共20分) 1．蜗杆传动中，轮齿承载能力计算，主要是针对 来进行的。 A) 蜗杆齿面接触疲劳强度和蜗轮齿根弯曲疲劳强度 B) 蜗轮齿面接触疲劳强度和蜗杆齿根弯曲疲劳强度 C) 蜗杆齿面接触疲劳强度和齿根弯曲疲劳强度 D) 蜗轮齿面接触疲劳强度和齿根弯曲疲劳强度 2．齿轮传动的动载荷系数中，动载荷系数v K 的大小主要与 有关。 A) 制造精度 B) 齿轮模数 C) 端面重合度 D) 轮齿宽度 3．滚动轴承基本额定动载荷所对应的基本额定寿命是 。 A) 710； B) 2.5×710 C) 610 D)5×6 10 4．当轴上安装的零件要承受轴向力时，采用 来进行轴向定位，所能承受的轴向力较大。 A) 圆螺母 B) 紧定螺钉 C) 弹性挡圈 5．离合器与联轴器的不同点为 。 A) 过载保护 B) 可以将两轴的运动和载荷随时脱离和接合 C) 补偿两轴间的位移 6．滚动轴承的内外圈及滚动体的表面硬度为 ；软齿面齿轮的齿面硬度为 。 A) 150HBS B)（20～32）HBS C) ≤350 HBS D) (60～65)HRC 7. 某轴材料为45钢，两支点采用深沟球轴承支承，验算时发现轴的刚度不够，这时应 。 A ）改为合金钢轴 B ）改为滚子轴承 C) 增加轴径 D) 改为滑动轴承 8．带传动采用张紧轮的目的是 。 A) 调节带的初拉力 B) 提高带的寿命 C) 改变带的运动方向 D) 减轻带的弹性滑动 9．圆锥齿轮为了测量和计算方便标准模数取在 ，受力分析时模数取在 。 A) 分度圆锥面 B) 轮齿大端 C) 齿宽中点 D)锥距中点 10．当采用铰制孔用螺栓联接承受横向载荷时，螺栓杆受到 作用。 A) 剪切和挤压 B ）拉伸和剪切 C) 弯曲和挤压 D) 扭转和弯曲 二、填空题（每空1分，共25分） 1．在普通平健联接中，平健的工作面是 ，其最主要的失效形式是 ，平健的剖面尺寸（h b ?）按 从标准中选取。 2．直齿圆柱齿轮齿根弯曲强度计算中，载荷作用于齿顶时的齿形系数Fa Y 与 有关。 3．影响单根V 带实际所能传递功率的主要因素有 、 、 、 。 4．有一非液体润滑的径向滑动轴承，宽径比5.1/=d B ，轴径=d 100mm,若轴承材料的许用值 5][=p MPa, 10][=pv MPa.m/s ，3][=v m/s ，轴的转速500=n r/min ，则该轴允许承受的载荷=max F 。（4分） 5．有一滚动轴承的代号为7211C/P5, 其类型为 ，尺寸系列为 ，轴承孔内径为 mm ，

青科成人教育《微机原理与应用A卷》期末考试试题及参考答案

1.MCS-51单片机程序存储器组织分片内和片外两部分，对它们的访问由控制线EA 给予控制，当EA为1时，对内0000H~0FFFH地址范围和对外1000H~FFFFH 地址范围访问，当EA 为0时，全部对外，访问的地址范围是全对外0000H~FFFFH 2.微机对I/O接口的编址方式有独立和与RAM统一编址方式，MCS-51采用统一编址方式。 3.键盘输入判别键按下的方法有扫描法和反转法。 二、选择1.B 2.A 3.C 4.B 5.C 6.A 1.MCS-51单片机访问外部数据存储器用什么指令的记符（） A、MOV B、MOVX C、MOVC 2.MCS-51单片机可访问64K存储空间，需十六条地址线，它们用P0口和P2口给出，为正确使用，需将哪个口的输出地址进行锁存（） A、P0口需锁存 B、P2口需锁存 C、P0P2平均需锁存 3.MCS-ⅤⅠ在64K存储空间实现程序转移的助记符是（） A、AJMP B、SJMP C、LJMP 4、下面哪个是寄存器间接寻址的操作数写法（） A、R0 B、@R0 C、@A+DPTR 5.MCS-51单片机有多个特殊功能寄存器，下面哪个是表示程序运行后状态的（） A、ACC B、DPTR C、PSW 6、在微机控制系统中，常将单片机作系统的控制器在线使用，它需经两个通道与被控对象或生产过程相连，其中A/D转换器是哪个通道的关键部件（） A、模拟量输入通道 B、模拟量输出通道 C、模拟量输入和输出通道都需要 三、计算题 1、将下面二进制数转化为十进制数和十六进制数（11111）2 31 1FH 2、两个压缩（组合）的BCD码数，经相加后得累加A=9AH，且樗状态Cy=0, AC=0,用DA A指令化为准确的十进制数。 100；A>9 加06H，进位9变A，又>9加60H 得结果 四、问答题 1、某外扩的数据存储器芯片的地址线A0~A12共十三条，低8位与MCS-51单片机经间接相连，高5位与MCS-51的高8位地址提供口的低位5条线直接相连，且MCS-51的高8位地址提供口的高三位线中的最高位用作片选为低电平，其余两条设置为高电平，试确定该外扩芯片的地址范围（用十六进制表达）。

青岛科技大学实习报告

青 岛 科 技 大 学 本 科 毕 业 实 习 与 设 计（报 告） 实习地点：__________________________________ 实习名称：__________________________________ 指导教师__________________________ 辅导教师__________________________ 学生姓名__________________________ 学生学号 _______________________ _______________________________院（部）____________________________ 专业 化工学院 化学工程与工艺 热力联合车间工艺流程学习 齐鲁石化胜利炼油厂

________________ 班 ______年___月___日学生指导教师 实习名称齐鲁石化炼油厂 热力联合车间实习时间2011/10/19— 2011/10/25 实习地点淄博齐鲁石化炼油厂 实习目的1、巩固与运用所学各门课程的知识，理论联系实际，培养工程与工艺观点，训练观察分析和解决工程实际问题的独立工作能力。 2、通过对生产工艺过程的现场实习，掌握该产品生产的实际知识和技能，学习操作控制等有关知识。 3、收集各项资料和数据，为毕业设计或论文打下一定的基础。 4．毕业实习是培养化工类本科专业的高级工程设计技术人员的重要实践环节，通过实习使学生能够理论联系实际，进一步巩固和掌握所学理论知识，获得实践知识和技能，提高独立工作能力和组织管理能力，化工产品的技术经济分析能力，化工企业的环境保护意识等，同时还是培养本科生尊重体力劳动，尊重工人师傅的良好机会，使之养成良好的思想作风和工作作风。 5．学完本专业教学计划规定的理论教学课程之后，有针对性地到与本专业相关的工厂或研究单位，把所学的理论知识综合运用到生产和科研实践中，进一步加深、巩固知识。 2011 11 3