HST-0041SAR
制 图：
DRAWING BY
批
准：
APPROVED BY
签 名：
SIGNATURE
1 of 5
A1
审 核：
CHECKED BY
产品型号
版 本
REV
签 名
SIGNATURE
客户名称
CUSTOMER
客户料号
MODEL NO
客户承认
CUSTOMER APPROVAL
产品名称
PART NAME
承认印:
SIGNET
承 认 书
SPECIFICATION FOR APPROVAL
PART TYPE
10/100Base-T TRANSFORMER
HST-0041SAR
Revision History:
Drawing by Checked by Approved by Issued date
DGY Jiang Wang Peter Lee 2008-11-1DGY
Jiang Wang
Peter Lee
2010-12-6
2 of 5
A0Quotation Release A1
New release
Revision Revision Descriptions
10/100 BASE TRANSFORMER
Features：
●Designed to meet IEEE 802.3 requirements.
●Primary inductance(Lp)350uH min.@ 100KHz,0.1Vrms,8mA .
●Designed for reflow soldering at temperatures up to 260℃.
●RoHS compliance.
Dimension:mm(inch),Unless otherwise spe cified , all tolerance are±0.25(0.01)
* The curve includes recommended value only, please adjust your equipment
to make sure the solder process.Details please refers to the standard J-STD-020.2. Reliability Test Criteria.
2.1 Operating temperature range: 0℃ to 70℃
2.2 Terminal strength: Pull test withstand 9.8N 60+/-0.5S no looseness or movement.
2.3 Solderbility: Dipped in 245℃+/-5℃ molten solder for 3+/-0.5 seconds,95% min shall be smooth any and bright
2.4 Resistance to soldering heat : Convection reflow condition setting: peak temperature at 260℃+0/-5℃ above 217℃ for 90-180 seconds, ramp-up rate 2-3℃/s. Ramp-down rate 6℃/s Max. No mechanical problem found. No electrical failure found per our specification.
2.5 Vibration: 1.5mm amplitude total excursion 10-55-10 Hz traversed in 1minute, x.y.z, axis for 2 hours. Shall not be any abnormality.
2.6 Random drop (Packing condition): Height 60cm, 3 times on the wood floorboard ,shall not be any abnormality.
2.7 Dry heat: 100+/-2℃ 96 hours. 2.8 Cold: -20+/-2℃ 96 hours.
2.9 Damp Heat: 60+/-2℃, 93+/-3% RH 96 hours.
2.10 Change of temperature: exposed 5 cycle; each consisting of 30 minutes at -20+/-2℃,2-3 minutes at 20+/-2℃,30 minutes at 85+/-2℃, 2-3 minutes at 20+/-2℃.
Remarks: After reliability test per item 7,8,9,10 in prior to the test as specified, the transformer / coil would be exposed to the room temperature for 1-2 hours,the component meets all requirements according to this specification.
4 of 5
1. Recommended Lead Free IR Reflow Soldering Curve ts
Tape and Reel Package
4.Carton Size and Packaging Quantities:
4.1 Quantity per reel: 750pcs.4.2 Quantity per carton: 3000pcs.4.3 Carton size: 36.8X36.8X20.5CM 3.
4.4 Unit weight: 0.6g.4.5 Carton weight:
5.3kg.
5 of 5
1.Tape Size:
Parameter
#1#3#4
#5Lp ： (1-3)535559551560 (6-8)565551561580Turn Ratio ： (1-3)/(16-14)OK OK OK OK (6-8)/(11-9)
OK OK OK OK Insertion Loss ： (1MHz ；1-3)-0.75-0.53-0.78-0.55 (100MHz ，1-3)-0.76-0.56-0.52-0.56 (1MHz ；6-8)-0.51-0.51-0.62-0.58 (100MHz ，6-8)
-0.52-0.69-0.49-0.44Return Loss ： (1~30MHz,1-3)-20.5-25-23.7-21.7 (60MHz,1-3)-15.5-20.0-18.9-16.5 (80MHz,1-3)-13.6-18.0-17.1-14.5 (1~30MHz,6-8)-21.5-20.2-21.2-23.5 (60MHz,6-8)-16.7-15.0-16.0-18.4 (80MHz,6-8)
-15.0-12.9-14.0-16.4DCMR ： (30MHz,1-3)-49-48.8-47.3-47.9 (50MHz,1-3)-48.3-47.1-46.9-46.4 (100MHz,1-3)-54.4-52.4-53.3-55.8 (30MHz,6-8)-47.8-47.5-48.3-44.7 (50MHz,6-8)-46.6-46.9-46.8-45.3 (100MHz,6-8)-43.5-48.7-44.7-46.7Crosstalk ： (30MHz,1-3,6-8)-55.6-55.1-59.2-56.2 (60MHz,1-3,6-8)-51.4-50.6-54.4-52.4 (100MHz,1-3,6-8)
-51.5
-49.3
-54.5
-52.3
Hi-pot(pri-sec) 1500VAC OK OK OK OK
-37dB Min -33dB Min -42dB Min -35dB Min
-37dB Min -33dB Min -45dB Min -18dB Min -14dB Min -12dB Min -40dB Min -18dB Min -14dB Min -12dB Min -42dB Min -1.1dB Max -1.1dB Max -1.1dB Max -22.8-15.7-17.7-47.5-56.5-22.1GROUP-TEK P/N:-16.9-14.8-48.4-69.51CT:1CT@100KHz 0.1V 1CT:1CT@100KHz 0.1V
10/100 BASE-T MAGNETICS
MODULES
2011-1-430PCS
Date:-63.7
Customer:
550Requirements
350μH Min @100KHz 0.1V 8mA 350μH Min @100KHz 0.1V 8mA
Customer P/N:
-1.1dB Max LCR meter:ZH1601
OK -46.8OK OK -0.51-0.60-0.62-44.1-42.6-59.5558#2-0.57Description:Q'ty:HST-0041SAR
Humidity:60%RH
Network analyzer:AV3620A
Hi-pot test equipment:GPI-5005T Test Condition:
Temperature:25℃