当前位置：文档库 › B32682-A1222-J289中文资料

B32682-A1222-J289中文资料

Metallized Polypropylene (MKP/MFP)

Series/Type:B32682

The following products presented in this data sheet are being withdrawn.

Wound MFP pulse capacitors

with highest possible contact reliability Construction

I Dielectric: polypropylene

I Film metallized on one side and

metal foils internally connected in series

I Plastic case (UL 94 V-0)I Epoxy resin sealing

Features

I Very high pulse strength

I Highest possible contact reliability I Self-healing properties

Typical applications

I Pulse circuits with steep voltage rise rates I High-frequency ac loads

I Snubbering of power semiconductors

Terminals

I Parallel wire leads, tinned

I Also available with (3,2 ± 0,3) mm lead length

Marking

Manufacturer’s logo, lot number style (MFP),

rated capacitance (coded),

capacitance tolerance (code letter),rated dc voltage,

date of manufacture (coded)Delivery mode

Bulk (untaped)

Taped (Ammo pack or reels)

For notes on taping, refer to chapter “Taping and packing”, page 274.

Lead spacing

± 15,0B 32682Metallized Polypropylene Film Capacitors (MFP)…B 32686

in Plastic Case

MFP Overview of available types Lead spacing 15 mm 22,5 mm Type B 32 682 B 32 683Page 181

182

0,10nF 2000 V d c 500 V a c

0,15nF 0,22nF 0,33nF 0,47nF 0,68nF 1,0nF 1,5nF 1600 V d c 450 V a c

2,2nF

1250 V d c 450 V a c

2000 V d c 500 V a c

3,3nF 1000 V d c 400 V a c

4,7nF 630 V d c 300 V a c

6,8nF 1600 V d c 450 V a c

10nF 1000 V d c 400 V a c

1250 V d c 450 V a c

15nF 22nF 33nF 630 V d c 300 V a c

47nF 68nF 0,10μF 0,15μF

Lead spacing 27,5 mm 37,5 mm Type B 32 684 B 32 686Page 183

184

15nF 2000 V d c 500 V a c

22nF 2000 V d c 500 V a c 33nF 1600 V d c 450 V a c

47nF 1250 V d c 450 V a c

1600 V d c 450 V a c

68nF 1000 V d c 400 V a c

1250 V d c 450 V a c

0,10μF 000 V d c 400 V a c

0,15μF 30 V d c 00 V a c

0,22μF B 32686

B 32682…

MFP

Capacitance tolerance: ±10 % =? K, ±5 % =? J, (±3,5 % upon request)

Ordering codes and packing units, lead spacing 15 mm V R

(V rms , f ≤ 1 kHz)C R

Maximum dimensions b × h × l (mm)Ordering code 1)

Packing units (pcs)Ammo pack Reel Untaped 630 Vdc (300 Vac)

4,7 nF 5,0 × 10,5 × 18,0B32682-A6472-+***1170130010006,8 nF 5,0 × 10,5 × 18,0B32682-A6682-+***11701300100010 nF 5,0 × 10,5 × 18,0B32682-A6103-+***11701300100015 nF 6,0 × 11,0 × 18,0B32682-A6153-+*** 9601100100022 nF 7,0 × 12,5 × 18,0B32682-A6223-+*** 830 900100033 nF 8,5 × 14,5 × 18,0B32682-A6333-+*** 680 700 50047 nF 9,0 × 17,5 × 18,0B32682-A6473-+*** 640 700 5001000 Vdc (400 Vac)

3,3 nF 5,0 × 10,5 × 18,0B32682-A332-+***1170130010004,7 nF 6,0 × 11,0 × 18,0B32682-A472-+*** 960110010006,8 nF 7,0 × 12,5 × 18,0B32682-A682-+*** 830 900100010 nF 8,5 × 14,5 × 18,0B32682-A103-+*** 680 700 50015 nF 9,0 × 17,5 × 18,0B32682-A153-+*** 640 700 5001250 Vdc (450 Vac)

2,2 nF 5,0 × 10,5 × 18,0B32682-A7222-+***1170130010003,3 nF 6,0 × 11,0 × 18,0B32682-A7332-+*** 960110010004,7 nF 7,0 × 12,5 × 18,0B32682-A7472-+*** 830 90010006,8 nF 8,5 × 14,5 × 18,0B32682-A7682-+*** 680 700 50010 nF 9,0 × 17,5 × 18,0B32682-A7103-+*** 640 700 5001600 Vdc (450 Vac)

1,5 nF 5,0 × 10,5 × 18,0B32682-A1152-+***1170130010002,2 nF 6,0 × 11,0 × 18,0B32682-A1222-+*** 960110010003,3 nF 7,0 × 12,5 × 18,0B32682-A1332-+*** 830 90010004,7 nF 8,5 × 14,5 × 18,0B32682-A1472-+*** 680 700 5006,8 nF 9,0 × 17,5 × 18,0B32682-A1682-+*** 640 700 5002000 Vdc (500 Vac)

0,10 nF 5,0 × 10,5 × 18,0B32682-A2101-+***1170130010000,15 nF 5,0 × 10,5 × 18,0B32682-A2151-+***1170130010000,22 nF 5,0 × 10,5 × 18,0B32682-A2221-+***1170130010000,33 nF 5,0 × 10,5 × 18,0B32682-A2331-+***1170130010000,47 nF 5,0 × 10,5 × 18,0B32682-A2471-+***1170130010000,68 nF 5,0 × 10,5 × 18,0B32682-A2681-+***1170130010001,0 nF 5,0 × 10,5 × 18,0B32682-A2102-+***1170130010001,5 nF 6,0 × 11,0 × 18,0B32682-A2152-+*** 960110010002,2 nF 7,0 × 12,5 × 18,0B32682-A2222-+*** 830 90010003,3 nF 8,5 × 14,5 × 18,0B32682-A2332-+*** 680 700 5004,7 nF

9,0 × 17,5 × 18,0

B32682-A2472-+***

640

700

500

1)+ Code letter for capacitance tolerance

B 3268215

MFP

Capacitance tolerance: ±10 % =? K, ±5 % =? J, (±3,5 % upon request)

Ordering codes and packing units, lead spacing 22,5 mm V R

(V rms , f ≤ 1 kHz)C R

Maximum dimensions b × h × l (mm)Ordering code 1)

Packing units (pcs)Ammo pack Reel Untaped 630 Vdc (300 Vac)

33 nF 6,0 × 15,0 × 26,5B32683-A6333-+***68070072047 nF 7,0 × 16,0 × 26,5B32683-A6473-+***58060063068 nF 8,5 × 16,5 × 26,5B32683-A6683-+***4805005100,10 μF 10,5 × 16,5 × 26,5B32683-A6104-+***3904005400,15 μF 11,0 × 20,5 × 26,5B32683-A6154-+***3703505101000 Vdc (400 Vac)

10 nF 6,0 × 15,0 × 26,5B32683-A103-+***68070072015 nF 6,0 × 15,0 × 26,5B32683-A153-+***68070072022 nF 7,0 × 16,0 × 26,5B32683-A223-+***58060063033 nF 8,5 × 16,5 × 26,5B32683-A333-+***48050051047 nF 10,5 × 18,5 × 26,5B32683-A473-+***3904005401250 Vdc (450 Vac)

10 nF 6,0 × 15,0 × 26,5B32683-A7103-+***68070072015 nF 7,0 × 16,0 × 26,5B32683-A7153-+***58060063022 nF 8,5 × 16,5 × 26,5B32683-A7223-+***48050051033 nF 10,5 × 18,5 × 26,5B32683-A7333-+***3904005401600 Vdc (450 Vac)

6,8 nF 6,0 × 15,0 × 26,5B32683-A1682-+***68070072010 nF 7,0 × 16,0 × 26,5B32683-A1103-+***58060063015 nF 8,5 × 16,5 × 26,5B32683-A1153-+***48050051022 nF 10,5 × 18,5 × 26,5B32683-A1223-+***3904005402000 Vdc (500 Vac)

2,2 nF 6,0 × 15,0 × 26,5B32683-A2222-+***6807007203,3 nF 6,0 × 15,0 × 26,5B32683-A2332-+***6807007204,7 nF 7,0 × 16,0 × 26,5B32683-A2472-+***5806006306,8 nF 8,5 × 16,5 × 26,5B32683-A2682-+***48050051010 nF 10,5 × 16,5 × 26,5B32683-A2103-+***39040054015 nF

11,0 × 20,5 × 26,5

B32683-A2153-+***

370

350

510

1)+ Code letter for capacitance tolerance

B 32683

22,5

MFP

Capacitance tolerance: ±10 % =? K, ±5 % =? J, (±3,5 % upon request)

Ordering codes and packing units, lead spacing 27,5 mm V R

(V rms , f ≤ 1 kHz)

C R Maximum dimensions b × h × l (mm)Ordering code 1)

Packing units (pcs)Ammo pack Reel Untaped 630 Vdc (300 Vac)0,15 μF 11,0 × 21,0 × 31,5B32684-A6154-+***–3503200,22 μF

12,5 × 21,5 × 31,5B32684-A6224-+***–3002800,33 μF 15,0 × 24,5 × 31,5B32684-A6334-+––2400,47 μF

18,0 × 27,5 × 31,5B32684-A6474-+––2001000 Vdc (400 Vac)68 nF 11,0 × 21,0 × 31,5B32684-A683-+***–3503200,10 μF

12,5 × 21,5 × 31,5B32684-A104-+***–3002800,15 μF

18,0 × 27,5 × 31,5B32684-A154-+––2001250 Vdc (450 Vac)47 nF 11,0 × 21,0 × 31,5B32684-A7473-+***–35032068 nF

13,5 × 23,0 × 31,5B32684-A7683-+***–2502600,10 μF 15,0 × 24,5 × 31,5B32684-A7104-+––2400,15 μF

19,0 × 30,0 × 31,5B32684-A7154-+––1801600 Vdc (450 Vac)33 nF 11,0 × 21,0 × 31,5B32684-A1333-+***–35032047 nF

12,5 × 21,5 × 31,5B32684-A1473-+***–30028068 nF 15,0 × 24,5 × 31,5B32684-A1683-+––2400,10 μF

19,0 × 30,0 × 31,5B32684-A1104-+––1802000 Vdc (500 Vac)15 nF 11,0 × 21,0 × 31,5B32684-A2153-+***–35032022 nF

11,0 × 21,0 × 31,5B32684-A2223-+***–35032033 nF 14,0 × 24,5 × 31,5B32684-A2333-+––26047 nF

18,0 × 27,5 × 31,5

B32684-A2473-+

–

200

1) + Code letter for capacitance tolerance

B 3268427,5

MFP

Capacitance tolerance: ±20 % =? M, ±10 % =? K, ±5 % =? J , ±5 %

Ordering codes and packing units, lead spacing 37,5 mm V R

(V rms

f < 60 kHz)

C R Maximum dimensions b × h × l (mm)Ordering code 1)

Packing units (pcs)Untaped 1000 Vdc (400 Vac)0,10 μF 12,0 × 22,0 × 41,5B32686-A104-+720,15 μF

14,0 × 25,0 × 41,5B32686-A154-+560,22 μF 16,0 × 28,5 × 41,5B32686-A224-+480,33 μF 20,0 × 39,5 × 41,5B32686-A334-+320,47 μF

20,0 × 39,5 × 41,5B32686-A474-+321250 Vdc (450 Vac)0,68 nF 12,0 × 22,0 × 41,5B32686-A7683-+720,10 μF

14,0 × 25,0 × 41,5B32686-A7104-+560,15 μF 16,0 × 28,5 × 41,5B32686-A7154-+480,22 μF 18,0 × 32,5 × 41,5B32686-A7224-+480,33 μF

20,0 × 39,5 × 41,5B32686-A7334-+321600 Vdc (450 Vac)0,47 nF 12,0 × 22,0 × 41,5B32686-A1473-+720,68 nF

14,0 × 25,0 × 41,5B32686-A1683-+560,10 μF 18,0 × 32,5 × 41,5B32686-A1104-+480,15 μF

20,0 × 39,5 × 41,5B32686-A1154-+322000 Vdc (500 Vac)0,22 nF 12,0 × 22,0 × 41,5B32686-A2223-+720,33 nF

14,0 × 25,0 × 41,5B32686-A2333-+560,47 nF 16,0 × 28,5 × 41,5B32686-A2473-+480,68 nF 18,0 × 32,5 × 41,5B32686-A2683-+480,10 μF

20,0 × 39,5 × 41,5

B32686-A2104-+

B 32686

37,5

MFP

Technical data

Climatic category

in accordance with IEC 60068-1

55/100/56

Lower category temperature T min Upper category temperature T max ? 55 °C + 100 °C

Damp heat test56 days/40 °C/93% relative humidity

Limit values after damp heat test Capacitance change |?C/C| ≤ 2 %

Dissipation factor change ? tan δ ≤ 1,0 ? 10?3 (at 10 kHz) Insulation resistance R is ≥ 50 % of minimum

or time constant τ = C R?R is as-delivered values

Reliability:

Reference conditions Failure rate 0,5 ?V R; 40 °C

1 ? 10?9/h = 1 fit

For a conversion table for other operating conditions and tem-peratures, refer to chapter “Quality assurance”, page327.

Service life200 000 h Failure criteria:

Total failure

Failure due to variation of parameters Short circuit or open circuit

Capacitance change |?C/C|> 10 %

Dissipation factor tan δ 4 ? upper limit values Insulation resistance R is< 1500 M?(C R≤ 0,33μF) or time constant τ = C R?R is< 500 s(C R> 0,33μF)

DC test voltage2,0 ?V R, 2 s

Category voltage V C

Operation with dc voltage or

ac voltage V rms up to 1 kHz

T≤ 85 °C: V C = 1,0 ?V R or 1,0 ?V rms

Dissipation factor tan δ (in 10?3) at 20 °C

(upper limit values)

Insulation resistance R is

or time constant τ = C R?R is

at 20 °C, rel. humidity ≤ 65 % (minimum as-delivered values)

C R≤ 0,1 μF C R> 0,1 μF at 1 kHz–0,4

10 kHz0,40,5

100 kHz1,0–

C R≤ 0,33 μF C R> 0,33 μF

100 G?30 000 s

…B32686

B32682

MFP

Pulse handling capability

Maximum permissible voltage change per unit of time for non-sinusoidal voltages (pulse, sawtooth) For V pp < V R , the permissible voltage rise rate value V pp /τ may be multiplied by the factor V R /V pp .Also refer to the calculation example in chapter “General technical information”, page 302. V R

Max. rate of voltage rise V pp /τ in V/μs (for V pp = V R )Lead spacing 15 mm

22,5 mm 27,5 mm 37,5 mm 630 Vdc 500030002000—1000 Vdc 90005000380020001250 Vdc 120007000450028001600 Vdc 1600011000600035002000 Vdc

17000

15000

8000

4500

V R

Pulse characteristic k 0 in V 2/μs (for V pp ≤ V R )Lead spacing 15 mm

22,5 mm 27,5 mm 37,5 mm 630 Vdc 630000038000002500000—1000 Vdc 1800000010000000750000040000001250 Vdc 30000000175000001100000070000001600 Vdc 510000003500000019000000110000002000 Vdc

68000000

60000000

32000000

18000000

B 32686

B 32682…

MFP

Permissible ac voltage V rms versus frequency f Lead spacing 15 mm 630 Vdc/300 Vac

1000 Vdc/400 Vac

1250 Vdc/450 Vac

1600 Vdc/450 Vac

B 3268215

MFP

Permissible ac voltage V rms versus frequency f Lead spacing 15 mm 2000 Vdc/500 Vac

B 32684

B 32682 (15)

MFP

Permissible ac voltage V rms versus frequency f Lead spacing 22,5 mm 630 Vdc/300 Vac

1000 Vdc/400 Vac

1250 Vdc/450 Vac

1600 Vdc/450 Vac

B 3268322,5

MFP

Permissible ac voltage V rms versus frequency f Lead spacing 22,5 mm 2000 Vdc/500 Vac

B 32683

22,5

MFP

Permissible ac voltage V rms versus frequency f Lead spacing 27,5 mm 630 Vdc/300 Vac

1000 Vdc/400 Vac

1250 Vdc/450 Vac

1600 Vdc/450 Vac

B 3268427,5

MFP

Permissible ac voltage V rms versus frequency f Lead spacing 27,5 mm 2000 Vdc/500 Vac

B 32684

27,5

MFP

Permissible ac voltage V rms versus frequency f Lead spacing 37,5 mm 1000 Vdc/400 Vac

1250 Vdc/450 Vac

1600 Vdc/450 Vac

2000 Vdc/500 Vac

B 3268637,5

MFP Flyback application

Permissible voltage and current / waveform

Permissible current I pp versus frequency for a duty cycle of 20 % (t 0 /t = 0,2):

Approximation formular for duty cycle higher than 20 %:

I ′pp

I pp

t 0

′3-----=B 32686

B 32682…

MFP

Flyback application

permissible current I pp versus rated capacitance C R Frequency = 15,75 kHz

Frequency = 31,5 kHz

Frequency = 95 kHz

…B 32686

B 32682

Herausgegeben von EPCOS AG

Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND

Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe.

Fragen über Technik, Preise und Lieferm?glichkeiten richten Sie bitte an den Ihnen n?chstgele-genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente k?nnen aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zust?ndige Vertriebsge-sellschaft einzuholen.

Published by EPCOS AG

Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY

EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro-chure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be con-sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.

Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.