SPECIFICATION
MODEL
ELN-30-5ELN-30-9ELN-30-12ELN-30-15ELN-30-24ELN-30-27ELN-30-48DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE CURRENT ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME Note.6HOLD UP TIME (Typ.)VOLTAGE RANGE FREQUENCY RANGE
EFFICIENCY (Typ.)AC CURRENT
INPUT
INRUSH CURRENT(max.)LEAKAGE CURRENT SAFETY STANDARDS HARMONIC CURRENT EMS IMMUNITY
WORKING TEMP.
DIMMING CONTROL (OPTIONAL)WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION OTHERS
NOTE
PACKING
OVER CURRENT
Note.4
OVER VOLTAGE
5V 9V 3 ~ 9V 12V 3 ~ 12V 15V 3 ~ 15V 24V 3 ~ 24V 27V 3 ~ 27V 48V 3 ~ 48V 5A 3.4A 2.5A 2A 1.25A 1.12A 0.63A 0 ~ 5A 0 ~ 3.4A 0 ~ 2.5A 0 ~ 2A 0 ~ 1.25A 0 ~ 1.12A 0 ~ 0.63A 25W 30.6W 30W 30W 30W 30.24W 30.24W 80mVp-p
100mVp-p 120mVp-p 120mVp-p 150mVp-p 150mVp-p 250mVp-p 5.0%4.5 ~ 5.5V
Can be adjusted by internal potential meter SVR1
8.7 ~ 10.5V
10.8 ~ 13.2V
13.5 ~ 16.5V
21.6 ~ 26.4V
24.3 ~ 29.7V
43.2 ~ 52.8V
-25% ~ 3%. Can be adjusted by internal potential meter SVR21.0%2.0%
500ms, 80ms / 230VAC 10at full load
00ms, 80ms / 115VAC 90 ~ 264VAC 47 ~ 63Hz 75%
80%
82%
82%
85%
85%
87%
5.75 ~
6.75V 11 ~ 13.5V 13.8 ~ 16V 1
7.5 ~ 21V 28 ~ 32V 31 ~ 36.4V
54 ~ 60V
0.75A/115VAC 0.48A/230VAC COLD STAR 60A/230VAC 0.25mA / 240VAC 95 ~ 110%
Protection type : Constant current limiting, recovers automatically after fault condition is removed Compliance to EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A -20 ~ +60(Refer to output load derating curve)1 ~ 10VDC or PWM
20 ~ 90% RH non-condensing
-40 ~ +80, 10 ~ 95% RH 0.03%/
(0 ~ 50
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X,Y, Z axes
628.3Khrs min. MIL-HDBK-217F (25)145*47*30mm (L*W*H)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the derating curve for more details.
5. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets 0.26Kg; 60pcs/1
6.6Kg/1.25CUFT
Protection type :Shut down o/p voltage, re-power on to recover
Universal AC input / Full range
Fully isolated plastic case with IP64 level
Built-in constant current limiting circuit with adjustable OCP level Protections: Short circuit / Overload / Over voltage
Optional dimming function : 1.1~10VDC (D type) or PWM (P type) controlled UL1310 Class 2 power unit Cooling by free air convection 100% full load burn-in test
Suitable for LED lighting and moving sign applications Low cost 2 years warranty
Features :
RIPPLE & NOISE (max.)Note.2VOLTAGE TOLERANCE Note.3ENVIRONMENT EMI CONDUCTION & RADIATION SAFETY &FUNCTION EMC PROTECTION
50ms/230VAC 16ms/115VAC at full load Design refer to UL1310 Class 2,TUV EN60950-1, CAN/CSA C22.2 No. 223-M91(except for 48V), EN61347-2-13; IP64 approved IP64
WITHSTAND VOLTAGE
ISOLATION RESISTANCE I/P-O/P:3KVAC
I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH LED OPERATION VOLTAGE Note.73 ~ 5V
Mechanical Specification
Case No.964A
Unit:mm
30
+V(Red)(Optional)
DIM+(Blue)-V(Black)DIM-(White)
fosc : 60KHz
DETECTION PWM CIRCUIT
O.L.P.
EMI FILTER
RECTIFIERS
POWER SWITCHING
FILTER
&RECTIFIERS
+V -V DIM-DIM+
Optional
Dimming Control PWM or 1.1~10V
I/P
CONTROL
O.V.P.
&
O.C.P.
32010
18AWG 2C
9.83
+V(Red)-V(Black)
32010
18AWG 2C
4.38
145
47
2-R2.254.38
9.83
AC/L(Brown)AC/N(Blue)
Block Diagram
-15-5153020
4060
80100INPUT VOLTAGE (V) 60Hz
90100125135145155165175180200230264
10090
8070
605040
04050Ta=25
Derating Curve Static Characteristics
AMBIENT TEMPERATURE ()L O A D (%)
-2060L O A D (%)
(HORIZONTAL)
SVR2SVR1
Output voltage and current adjustment : remove the upper case and adjust through SVR1 & SVR2
shown in the diagram.
Output voltage adjustment Output current adjustment
SVR1SVR2
Dimming Control (Optional)
Vdc:1.1~10V
Vdc
(2)PWM
+DIM+
f
t1t1t1+t2f: 100Hz ~ 3KHz
Duty= ,0 ~ 100%t2
V
f
DIM-(1)1.1~10V
Lo:0V Hi:10V
0%
1.1
11%
15%
27.5%
37.5%
60%
77.5%
87.5%
95%
2
20%
3
30%
4
40%
5
50%6
60%7
70%8
80%9
90%10
100%
DC Input
Duty Cycle
O u t p u t C u r r e n t
O u t p u t C u r r e n t
10%10%0%
0%
20%20%30%30%40%40%50%50%60%60%70%70%80%80%90%90%100%100%5%47.5%
ELN-30-24
+V(Red)
24V, 1.25A 24V, 1.25A 24V, 1.25A 24V, 1.25A -V(Black)
ELN-30-24
+V(Red)
-V(Black)
1 to 6 LEDs //
2 strips
1 to 6 LEDs // 4strips
This configuration is based on LED with the following parameters :This configuration is based on LED with the following parameters :V F = 3.0~3.5V
V F = 3.0~3.5V
I =F 600~700mA
I =3F 00~350mA
R
R
6 LEDs // 1 to 2strips
6 LEDs // 1 to 4strips
This configuration is based on LED with the following parameters :This configuration is based on LED with the following parameters :V F = 3.0~3.5V V F = 3.0~3.5V I F =600~700mA
I F =300~350mA
R=10 ohm, 10W
R=20 ohm, 3W
LED
LED
LED
Recommend Application Deployment (24V)
ELN-30-24
+V(Red)
-V(Black)ELN-30-24
+V(Red)
-V(Black)
R
R
R
R
LED
Level of output current can be adjusted through the dimming control function.