XW2Z-500B中文资料
3
3XW2Z-PPP A FOR 32-POINT PLC I/O MODULES (CONNECTOR TYPE)
The G79-P C Cable with a connector for the G7TC cannot be used for the XW2C due to a difference in wiring.The G79-P C Cable can be used for some of the XW2B Screw Terminal Blocks,refer to the
XW2B data sheet.
Cable length L
Part number
Cable length L
XW2Z-050A 0.5m (1.64ft)XW2Z-100A 1m (3.28ft)XW2Z-150A 1.5m (4.92ft)XW2Z-200A 2m (6.56ft)XW2Z-300A 3m (9.84ft)XW2Z-500A
5m (16.40ft)
Wiring Diagram
FCN-367J024-AU/F (mated side)
XG4M-2030(mated side)
Triangle mark
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
I/O points
Terminal block
Dedicated cable
C200H-ID215C200H-OD215C200H-MD215C200H-MD115C200H-MD501C200H-ID501C200H-OD501C500-ID218CN C500-ID501CN C500-OD415CN C500-MD211CN C500-OD501CN 32points input 32points output
16points in/16points out 16points in/16points out 16points in/16points out 32points input 32points output 32points input 32points input 32points output
16points in/16points out 32points output
XW2B-20G5XW2B-20G4XW2B-40G5-T XW2B-20G5-D
XW2Z-PPP A
C200H-ID215C200H-ID501C500-ID218CN C500-ID501CN C200H-MD215C200H-MD115C200H-MD501C500--MD211CN
32points input 32points input 32points input 32points input
16points in/16points out 16points in/16points out 16points in/16points out 16points in/16points out
XW2C-20G5-IN16(See Note 3)
Note:1.The G79-P Cable with a connector for the G7TC cannot be used for the XW2C due to a difference in wiring.The G79-P C
Cable can be used for some of the XW2B Screw Terminal Blocks,refer to the XW2B data sheet.
2.The Input or Output Modules above have two connectors,so each one can use up to two Terminal Blocks and two dedicated
cables.
3.The XW2C is a dedicated Input Terminal Block.If the XW2C is connected to a PLC module that handles both input and output
signals (modules with “MD”in the part number),only the input portion of the PLC module can be used.
4
Unit:mm (inch)
3XW2Z-PPP B FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE)
Cable length L
Part number
Cable length L
XW2Z-050B 0.5m (1.64ft)XW2Z-100B 1m (3.28ft)XW2Z-150B 1.5m (4.92ft)XW2Z-200B 2m (6.56ft)XW2Z-300B 3m (9.84ft)XW2Z-500B
5m (16.40ft)
Wiring Diagram
FCN-367J040-AU/F (mated side)
XG4M-4030(mated side)
Triangle mark
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
I/O points Terminal block
Dedicated cable
CQM1-ID213CQM1-OD213C200H-ID216C200H-OD218C200H-OD21B 32points
XW2B-40G5XW2B-40G4
XW2Z-PPP B
C200H-ID111C200H-ID217C200H-OD219C500-ID1143G2A5-ID2193G2A5-OD213
64points
Note:32-point I/O modules use one Terminal Block and one dedicated cable.
64-point I/O modules use two Terminal Blocks and two dedicated cables.
5
3XW2Z-PPP D FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE)
Cable length for A and B
Line A Line B
Yellow
Black A
B
250(9.84)500(19.68)
XW2Z-P 00D Part number Cable length A Cable length B XW2Z-100D 1m (3.28ft)0.75m (2.46ft)XW2Z-150D 1.5m (4.92ft) 1.25m (4.10ft)XW2Z-200D
2m (6.56
ft) 1.75m (5.74ft)XW2Z-300D 3m (9.84ft) 2.75m (9.02ft)XW2Z-500D
5m (16.40ft)
4.75m (1
5.58ft)
Note:https://www.wendangku.net/doc/1e6937104.html,2(black cable side)is wired to line A of CN1and
CN3(yellow cable side)is wired to line B of CN1.
2.The G79-P C Cable for the G7TC Terminal Block can-not be used for the XW2C due to a difference in wiring.
FCN-367J024-AU/F
CN1(mated side)
XG4M-2030
CN3(mated side)
Triangle mark
XG4M-2030
CN2(mated side)
Triangle mark
Wiring Diagram
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
I/O points Terminal block
Dedicated cable
CQM1-ID213C200H-ID21632points Two XW2C-20GS-IN16input blocks One XW2Z-PPP D cable C200H-ID21764points
Four XW2C-20GS-IN16input blocks
Two XW2Z-PPP D cables
C500-ID1143G2A5-ID219
6
Unit:mm (inch)
3XW2Z-PPP H-P FOR 96-POINT CS1PLC I/O MODULES (CONNECTOR
TYPE)
XW2Z-P 00H-2XW2Z-P 00H-3
XW2Z-P 00H-1
7
3XW2Z-PPP F CABLE WITH CRIMP TERMINALS (20POLES)
Cable length L
To
devices XG4M-2030
Terminal Y (M3.5)
300(11.81)
Wiring Diagram
XG4M-2030(mated side)
Triangle mark
Terminal Y (M3.5)
Part number
Cable length L
XW2Z-100F 1m (3.28ft)XW2Z-150F 1.5m (4.92ft)XW2Z-200F 2m (6.56ft)XW2Z-300F 3m (9.84ft)XW2Z-500F
5m (16.40ft)
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
Terminal block
Dedicated cable
Use any I/O module with a terminal block from Omron or another manufacturer,or an I/O board for a computer.
XW2B-20G5XW2B-20G4
XW2Z-PPP F
8
3CONNECTIONS BETWEEN OMRON’S I/O MODULES AND SCREW TERMINAL BLOCKS
Item Input (ID)
Output (OD)
PLC I/O modules
C200H-ID215C200H-ID501C500-ID501CN C500-ID218CN
32-point input modules use two blocks and two cables.
C200H-OD215C200H-OD501C500-OD501CN
32-point output modules use two blocks and two cables.
Terminal blocks
XW2B-20G5XW2B-20G4XW2B-20G5XW2B-20G4
Cable
XW2Z-PPP A
XW2Z-PPP A
Connection diagram
XW2B--20G5
XW2B--20G5
Cable
G79-P C
G79-P C
Connection diagram
XW2B-20G5
XW2B-20G5
9
Item Output (OD)
PLC I/O module
C500-OD415CN
32-point output module uses two blocks and two cables.
Terminal block
XW2B-20G5XW2B-20G4
Cable
XW2Z-PPP A
G79-P C
Connection diagram
XW2B-20G5XW2B-20G5XW2B-20G5
XW2B-20G5
10
Item Mixed I/O(MD)
PLC I/O modules
C200H-MD115
C200H-MD215
C200H-MD501
C500-MD211CN
16-point input/16-point output mixed I/O
modules use two blocks and two cables.
Terminal blocks
XW2B-20G5
XW2B-20G4
Cable
XW2Z-PPP A G79-P C Connection
diagram
XW2B-20G5
XW2B-20G5XW2B-20G5 XW2B-20G5
11
Item Group 2High--density Input/Output
PLC I/O module
CQM1-ID21332-point Use one terminal block and one cable.C200H-ID21632-point Use one terminal block and one cable.C200H-ID11164-point Use two terminal blocks and two cables.C200H-ID21764-point Use two terminal blocks and two cables.C500-ID11464-point Use two terminal blocks and two cables.3G2A5-ID21964-point
Use two terminal blocks and two cables.
CQM1-OD21332-point Use one terminal block and one cable.C200H-OD21832-point Use one terminal block and one cable.C200H-OD219
64-point Use two terminal blocks and two cables.
Terminal block
XW2B-40G5XW2B-40G4
Cable
XW2Z-PPP B
Connection diagram
XW2B-40G5
(
)
()
()
12
CS1W-ID29P CS1W-OD29P CS1W-MD29P
Use two terminal blocks and two cables.
Terminal
block
One XW2B-60G5or
one XW2B-60G4per cable
Cable
XW2Z-PPP H-1
Connection
XW2B-60G P
Item High-density I/O 1:2Connection
PLC I/O module
CS1W-ID29P CS1W-OD29P CS1W-MD29P
Use two 40-point and two 20-point terminal blocks and two cables.
CS1W-ID29P
CS1W-OD29P
CS1W-MD29P
Use six20-point terminal blocks of
the same kind and two cables.
Terminal block
Three XW2B-20G5blocks or
three XW2B-20G4blocks
per cable
Cable
XW2Z-PPP H-3
Connection
XW2B-20G P XW2B-20G P
XW2B-20G P
Note:For detailed information about connector pin-outs,refer to CS1Operation Manual(W339),Appendix A.
Cat.No.GC RIO-104/00Specifications subject to change without notice.Printed in U.S.A. OMRON ELECTRONICS,INC.
One East Commerce Drive
Schaumburg,IL60173
NOTE:DIMENSIONS SHOWN ARE IN MILLIMETERS.To convert millimeters to inches divide by25.4.
1-800-55-OMRON
OMRON CANADA,INC.
885Milner Avenue
Scarborough,Ontario M1B5V8
416-286-6465
9