Agilent Technologies
and generates a millivolt DC or AC output signal. The narrow jaw is
designed for optimum use in crowded wiring in industrial and automotive environments.
The Agilent Technologies 34134A current probe measures low DC or AC from 10 mA to 50 A DC, 40 A AC.This battery-powered clamp-on probe can be used with digital multimeters, voltmeters, or other voltage-measuring instruments. The probe jaws clamp around the conductor under test, allowing current measurements without breaking the circuit. Hall sensor technology senses the magnetic field produced by the current measured
Compatibility
The 34134A current probe is compat-ible with any DMM, or other voltage measuring instrument which has the following features:
?Range and resolution capable of displaying 1 mV of input.
?Voltmeter accuracy (uncertainty)of 0.75% or better to take full advantage of the accuracy of the probe.
?Minimum input impedance of 100 k ?(1 V/A range) or 10 k ?(10 mV/A range).
?Input jacks that accept 4mm shrouded banana plugs.
Figure 1. The Agilent 34134A AC/DC DMM current probe. The narrow jaw is designed for optimum use in crowded wiring in industrial and automotive environments.
Figure 2. Agilent 34134A current probe control and connector identification
Specifications and Characteristics
Operating and environmental characteristics of the 34134A current probe are as shown below
Electrical Specifications
1 V/A Range (1 mV/mA) 10 mV/A Range Current Range DC: 10 mA to
2 A DC: 100 mA to 80 A
AC: 10 mA to 1.5 A AC: 100 mA to 60 A
Output Signal (AC/DC) 1 mV/mA (2 V @ 2 A) 10 mV/A
Accuracy* ±2% reading ±5mA 500 mA to 50 A DC/40 A AC:
±4% reading ±20 mA
50 to 80A DC: ±12% reading
0 to 60A AC: ±12% reading Frequency Range DC to 8 kHz @ –3 dB DC to 8 kHz
Phase Shift DC to 65 Hz: 1°DC to 65 Hz: 1°
Minimum Input Resistance100 k?100 k?
of Instrument
Noise DC to 1 Hz: 1.5 mV DC to 1 Hz: 15μV
1 Hz to 10 kHz: 14 mV 1 Hz to 10 kHz: 140μV
0 kHz to 100 kHz: 18 mV0 kHz to 100 kHz: 180μV
Slew Rate @ 5 A 120 mV/ μs 5.5 mV/ μs
* Accuracies are given for an ambient temperature of 23 °C ±3 °C, relative humidity of 20 to 75%, conductor
centered in jaw window, probe zeroed, no hysteresis in DC, DC to 40 to 100Hz sine wave (1mV/mA range) or
DC and 40 to 1 kHz sine wave (10mV/A range), 1 minute warm-up, battery at 9V, appropriate load impedance,
magnetic field <40A/m and no common mode.
2
Typical Frequency Response Curve
Figure 3. Voltage vs Frequencey Response Curve
Environmental Characteristics
Operating Temperature 0 to 50°C
Storage Temperature –30 to 80°C
Operating Relative Humidity 0 to 50°C, 0 to 85% relative humidity
Temperature Coefficient 800 ppm per °C +10 mA/°C typical from –10 to 50°C
Altitude Operating: 0 to 2000 m
Non-operating: 0 to 12,000 m
Mechanical Characteristics
Zero Adjustment 20 turn potentiometer
Maximum cable diameter 11.8 mm
Dimensions 67 x 231 x 36 mm
Weight 330g with battery
Color Grey
Material Fiberglass charged polycarbonate
Output Cable 1.5m double insulated lead with shielded banana plugs
Safety Specifications
Working voltage 600 V CAT III
Case protection IP20 per IEC 529
Drop test 1m according to IEC 68-2-32
Mechanical shock 100 G: test per IEC 68-2-27
Vibration Test per IEC 68-2-6 frequency range 10 Hz to 55 Hz,
amplitude: 0.15mm
3
Warranty Information
This Agilent Technologies product has a warranty against defects in material and workmanship for a period of one year from date of shipment. During the warranty period, Agilent Technologies will, at its option, either repair or replace products that prove to be defective. For warranty
service or repair, this product must be returned to a service facility designated by Agilent https://www.wendangku.net/doc/1513820862.html,/find/emailupdates
Get the latest information on the
products and applications you select.
Agilent Email Updates
Agilent Technologies’ Test and Measurement Support,
Services, and Assistance
Agilent Technologies aims to maximize the value you
receive, while minimizing your risk and problems. We
strive to ensure that you get the test and measurement
capabilities you paid for and obtain the support you need.
Our extensive support resources and services can help
you choose the right Agilent products for your applications
and apply them successfully. Every instrument and system
we sell has a global warranty. Support is available for at
least five years beyond the production life of the product.
Two concepts underlie Agilent’s overall support policy:
“Our Promise” and “Your Advantage.”
Our Promise
Our Promise means your Agilent test and measurement
equipment will meet its advertised performance and
functionality. When you are choosing new equipment, we
will help you with product information, including realistic
performance specifications and practical recommendations
from experienced test engineers. When you use Agilent
equipment, we can verify that it works properly, help with
product operation, and provide basic measurement assis-
tance for the use of specified capabilities, at no extra cost
upon request. Many self-help tools are available.
Your Advantage
Your Advantage means that Agilent offers a wide range of
additional expert test and measurement services, which
you can purchase according to your unique technical and
business needs. Solve problems efficiently and gain a
competitive edge by contracting with us for calibration,
extra-cost upgrades, out-of-warranty repairs, and onsite
education and training, as well as design, system integra-
tion, project management, and other professional engineer-
ing services. Experienced Agilent engineers and techni-
cians worldwide can help you maximize your productivity,
optimize the return on investment of your Agilent instru-
ments and systems, and obtain dependable measurement
accuracy for the life of those products.
Agilent T&M Software and Connectivity
Agilent’s Test and Measurement software and connectivity
products, solutions and developer network allows you to
take time out of connecting your instruments to your com-
puter with tools based on PC standards, so you can focus
on your tasks, not on your connections. Visit
https://www.wendangku.net/doc/1513820862.html,/find/connectivity
for more information.
By internet, phone, or fax, get assistance with all your
test & measurement needs
Online Assistance:
https://www.wendangku.net/doc/1513820862.html,/find/assist
Product specifications and descriptions in this document
subject to change without notice.
? Agilent Technologies, Inc. 2000, 2004
Printed in USA, May 1, 2004
5968-9567E
Phone or Fax
United States:
(tel) 800 829 4444
Canada:
(tel) 877 894 4414
(fax) 905 282 6495
China:
(tel) 800 810 0189
(fax) 800 820 2816
Europe:
(tel) (31 20) 547 2323
(fax) (31 20) 547 2390
Japan:
(tel) (81) 426 56 7832
(fax) (81) 426 56 7840
Korea:
(tel) (82 2) 2004 5004
(fax) (82 2) 2004 5115
Latin America:
(tel) (305) 269 7500
(fax) (305) 269 7599
Taiwan:
(tel) 0800 047 866
(fax) 0800 286 331
Other Asia Pacific
Countries:
(tel) (65) 6375 8100
(fax) (65) 6836 0252
Email:
tm_asia@https://www.wendangku.net/doc/1513820862.html,