Description
The Trojan T15 is a compact universal tongue actuated safety interlock switch designed to fit at the opening edge of sliding, hinged or lift-off guards. With its dual entry slots and rotatable head, movable only by releasing the cover screws, the Trojan T15 can offer four different options for actuator entry.
The Trojan T15 features a compact housing, only 75 x 52 x 32mm (2.95 x 2.04 x 1.25in) and includes direct opening action contacts and a tamper-resistant mechanism. The Trojan T15 has 2 N.C. safety contacts or 1 N.C. safety contact and 1 N.O. auxiliary contact. The unit is sealed to IP67 and has three M20 conduit entries. Operation of the switch is achieved by the insertion of the specially profiled stainless steel actuator which should be permanently fixed to the leading edge of the guard door. The standard T15 incorporates actuator retention force of 30N. An optional catch mechanism helps keep doors shut on vibrating machinery. Features
?Compact size, 75 x 52 x 32mm (2.95 x 2.05 x 1.26in) case
?30N actuator retention force
?Strong and versatile, can be used in most applications ?Contacts: 2 N.C. safety or 1 N.C. safety & 1 N.O. auxiliary ?GD2 style available for demanding applications
Applications
Note: Lift-off guards require good alignment when using
tongue actuated interlock switches.
IMPORTANT: It must not be possible to lift the guard
without actuating the interlock. An interlock on either
side may be required.
Specifications
?Conductive pollution occurs, or dry, non conductive pollution occur which becomes conductive due to condensation.
Standards EN954-1, ISO13849-1, IEC/EN60204-1,
NFPA79, EN1088, ISO14119, IEC/
EN60947-5-1, ANSI B11.19, AS4024.1 Category Cat. 1 Device per EN954-1
Dual channel interlocks suitable for
Cat. 3 or 4 systems
Approvals CE marked for all applicable directives,
cULus and TUV Nord
Safety Contacts 2 N.C. or 1 N.C. direct opening action Designation/Utilization Cat.
A600/AC-15 (Ue)
(Ie)
N600/DC-13 (Ue)
(Ie)
600V 500V 240V 120V
1.2A 1.4A 3A 6A
600V 500V 250V 125V
0.4A 0.55A 1.1A 2.2A
Max. Switched Current/
Voltage/Load500V/500VA
Thermal Current (lth)10A
Min Current5V 5mA DC
Safety Contact Gap>2 x 2mm (0.078in)
Rtd. Insulation Voltage(Ui) 500V
Rtd. Impulse Withstand Volt.(Uimp) 2500V
Auxiliary Contacts 1 N.O.
Pollution Degree ?3
Actuator Travel for Positive
Opening6mm (0.236in)
Min Operating Radius175mm (6.89in)
60mm (2.36in) with flexible actuator Break Contact Min Force30N (6.7lb)
Max Actuation Speed160mm (6.29) per sec
Max Actuation Frequency 2 Cycle per sec
Case Material UL approved glass filled polybutylene
terephthalate
Actuator Material Stainless Steel
Protection IP67
Conduit Entry 3 x M20 or quick disconnect style Operating T emperature-20°C to +80°C (-4°F to +176°F) Fixing 2 x M5
Mounting Any position
Mechanical Life1,000,000 operations
Electrical Life1,000,000 operations
Weight120g (0.265lbs)
Colour Red
Product Selection
Accessories
Model T ype
Contacts
Actuator M20 Conduit
Quick Disconnect
Safety
Aux.
Standard 1/2in NPT Adaptor
End Entry Standard
2 N.C.
—
Standard
440K-T11303440K-T11267440K-T11307Fully-Flex 440K-T11395440K-T11273
440K-T11384—440K-T11269—440K-T113851 N.C.
1 N.O.Standard 440K-T11305440K-T11268440K-T11386Fully-Flex 440K-T11396440K-T11276
440K-T11387—440K-T11270—440K-T11388GD2 Front Entry
2 N.C.
—
Standard
440K-T11463440K-T11288440K-T11389Fully-Flex 440K-T11397440K-T11287
440K-T11390—440K-T11280—440K-T113911 N.C.
1 N.O.Standard 440K-T11398440K-T11284440K-T11392Fully-Flex 440K-T11399440K-T11283
440K-T11393—
440K-T11279
—
440K-T11394
Recommended mating cable, 2m (6.5ft). See page 15-10 for details and additional lengths.
889D-F4AC-2
Description
For Dimensions See Page
Catalogue Number
Standard Actuator (Standard model only)
14-5440K-A11238
GD2 Standard Actuator (GD2 model only)
14-4440G-A27011
Flat Actuator 14-5440K-A11112
Accessories (continued)
Optional Items
Description
For Dimensions refer to page
Catalogue Number
Alignment Guide with Semi-Flexible Actuator
(Discard the Alignment Guide for GD2)
14-5440K-A11144
Alignment Guide with Fully-Flexible Actuator
(Discard the Alignment Guide for GD2)
14-6440K-A27010
Sliding Bolt Actuator 14-4440G-A27163
Catch and Retainer Kit (Standard Model Only)
14-4
440K-A11094
Used to keep guards on vibrating machinery closed.
Plug In Connection
The quick-disconnect option allows a quick connection facility.
Approximate Dimensions—mm (inches)
Dimensions are not intended to be used for installation purposes.
Typical Wiring Diagrams (shown with guard closed, actuator inserted)
1 N.C. & 1 N.O. (BBM)
2 N.C.
Actuator withdrawal distance
from full insertion