3mm DIP
Ambient Light Sensor ALS-PT204-6C/L177
Features
?Close responsively to the human eye spectrum
?Light to Current, analog output ?Good output linearity across wide illumination range ?Low sensitivity variation across various light sources ?Operating temperature performance, -40o C to 85o C ?Wide supply voltage range, 2.5V to 5.5V ?Size : 3mm Lamp
?RoHS compliant and Pb Free package
Description
The ALS-PT204-6C/L177 is consisting of a phototransistor in 3mm lamp. EVERLIGHT ALS series products are good effective solution to the power saving of display backlighting of mobile appliances, such as the mobile phones, NB and PDAs. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to human eyes.
Applications
?Detection of ambient light to control display backlighting
Mobile devices – mobile phones, PDAs
Computing device – TFT LCD monitor for Notebook computer
Consumer device – TFT LCD TV, video camera, digital camera, toys
?Automatic residential and commercial management
?Automatic contrast enhancement for electronic signboard
?Ambient light monitoring device for daylight and artificial light – Street light, CCD/CCTV
3mm DIP
Ambient Light Sensor
ALS-PT204-6C/L177
Package Dimensions
Notes:1.All dimensions are in millimeters
2. Tolerances unless dimensions ±0.1mm
3mm DIP
ALS-PT204-6C/L177 Ambient Light Sensor
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit Supply Voltage
V cc-0.5~6.0 V
[Note1]
Operating Temperature Range T opr-40 ~ +85 °C
Storage Temperature Range T stg-40 ~ +100 °C
Soldering Temperature Range [Note1]T sol260 ± 10 °C
Note1: For detail reflow time and the recommended temperature profile, please refer to page 8. Recommended Operating Conditions (Ta=25℃)
Parameter Symbol Min. Max. Unit Operating Temperature T opr-40 +85°C
Supply Voltage V cc 2.5 5.5 V
3mm DIP
Ambient Light Sensor
ALS-PT204-6C/L177
Electrical and Optical Characteristics (Ta=25℃)
Parameter Symbol MIN. TYP. MA
X.
Unit Test Condition Dark Current I CEO--- --- 0.1 uA V CE=10V, E v= 0Lux Collector-Emitter
Saturation Voltage
V CE(sat)--- --- 0.4 V I C=2mA, E v= 1000Lux
I PH1100 200 --- uA V CE=5V, E v= 100Lx
[Note1]
I PH21000 2000
0 --- uA V CE=5V, E v= 1000Lx
[Note1]
Light Current
I PH31800 3600 --- uA V CE=5V, E v= 1000Lx
[Note2] Photocurrent Ratio I PH3 / I PH2--- 1.8 --- --- V CE=5V, E v= 1000Lx
Saturation Output Voltage V o 4.5 4.6 --- V V cc=5V, E v= 1000Lx
R L=75K
[Note2]
Peak Sensitivity
Wavelength
λp--- 630 --- nm
Sensitivity
Wavelength Range
λ390 --- 700 nm
Rise time tr --- 0.11 --- ms Fall time tf --- 0.22 --- ms
V CC = 5 V R L = 7.5K?
Angle of half Sensitivity 2θ1/2--- 64 --- Deg. I
F
= 20 mA
Note:
1. White Fluorescent light (Color Temperature = 6500K) is used as light source. However, White LED is
substituted in mass production.
2. Illuminance by CIE standard illuminant-A / 2856K, incandescent lamp.
3mm DIP
ALS-PT204-6C/L177 Ambient Light Sensor
元器件交易网https://www.wendangku.net/doc/1816245940.html,
3mm DIP
ALS-PT204-6C/L177 Ambient Light Sensor
Converting Photocurrent to Voltage
) and loading resistor (R L) and output saturation voltage:
V out(max.) = I out(max.) × R L≦V out(saturation)=V cc-0.4V
3mm DIP
ALS-PT204-6C/L177 Ambient Light Sensor
Recommended method of storage
Reflow Terms: JEDEC Level 4 Specification
Dry box storage is recommended as soon as the aluminum bag has been opened prevent 1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift might cause big current happen. (Burned-out might happen).
2. Storage
(1) Do not open moisture proof bag before components are ready to use.
(2) Before opening moisture proof bag, components should be kept at 30℃ or less and
90%RH or less.
(3) Components should be used within a year.
(4) After opened moisture proof bag, components should be kept at 30℃ or less and
70%RH or less.
(5) Components should be used within 168 hours after opened moisture proof bag.
(6) If the moisture absorbent material (silica gel) has faded away or the components
have exceeded the storage time, baking treatment should be performed using the following conditions. (Baking treatment: 60±5℃ for 24 hours)
ESD Precaution:
Proper storage and handing procedures should be followed to prevent ESD damage to
the devices especially when they are removed from the Anti-static bag. Electro-Static Sensitive Devices warning labels are on the packing.
3mm DIP
ALS-PT204-6C/L177 Ambient Light Sensor
Recommended Solder Profile
Notice:
(1) Reflow soldering should not be done more than two times.
(2) When soldering, do not put stress on the devices during heating.
(3) After soldering, do not warp the circuit board.
Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
3mm DIP
ALS-PT204-6C/L177 Ambient Light Sensor
Packing Quantity Specification
3mm DIP
ALS-PT204-6C/L177 Ambient Light Sensor
Notes
1.Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2.When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
3.These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.