B43304B5127M007中文资料
223
10/02
General-purpose grade capacitors Applications
I Switch-mode power supplies in industrial
and entertainment electronics Features
I Extremely miniaturized
I High ripple current capability
I Many different case sizes available for
each capacitance value Construction
I Charge-discharge proof, polar I Aluminum case, fully insulated
I Snap-in solder pins to hold component in place on PC-board I Minus pole marking on case surface I Minus pole not insulated from case I
Overload protection (safety vent)
Terminals
I Standard version with 2 terminals
2 lengths available: 6,
3 and 4,5 mm
I 3 terminals: length 4,5 mm
(terminal arrangement ensures correct insertion)
Miniaturized – 85°C Snap-In Capacitors B43304
224
10/02
Miniaturized – 85°C
B43304
Specifications and characteristics in brief Rated voltage U R Surge voltage U S 200 … 450 VDC
1,15 · U R (for U R ≤ 250 VDC)1,10 · U R (for U R ≥ 400 VDC)Rated capacitance C R Capacitance tolerance 82 …2200μF ± 20 % M
Dissipation factor tan δ(20 °C, 120 Hz)U R ≤ 250 V: tan δ ≤ 0,15 U R ≥ 400 V: tan δ ≤ 0,20Leakage current I L (5 min, 20 °C)Self-inductance ESL Approx. 20 nH
Useful life
Requirements: 85 °C; U R ; I ~max
40 °C; U R ; 1,15 · I ~R
> 2 000 h > 100 000 h ?C /C
≤ ± 30 % of initial value
tan δ ≤ 3 times initial specified limit I L
≤ initial specified limit
Failure percentage:≤ 1 %Failure rate:≤ 100 fit (≤ 100 · 10–9/h)
(for definiton “fit ”, refer to chapter “Quality ”, page 62)
Load life test 85 °C; U R ; I ~R
2000 h
Post test requirements:?C/C ≤ ± 20 % of initial value
tan δ≤ 2 times initial specified limit I L ≤ initial specified limit Voltage endurance test 85°C; U R
2000 h
Post test requirements:
?C /C ≤ ± 10 % of initial value
tan δ≤ 1,3 times initial specified limit I L
≤ initial specified limit
Vibration resistance
To IEC 60068-2-6, test Fc:
displacement amplitude 0,35mm, frequency range 10 … 55Hz,acceleration max. 5g , duration 3 × 2 h IEC climatic category
To IEC 60068-1:
U R ≤ 250 VDC:40/085/56 (– 40°C/+ 85°C/56 days damp heat test)U R ≥ 400 VDC:25/085/56 (– 25°C/+ 85°C/56 days damp heat test)Detail specification Sectional specification
Similar to CECC 30301-806IEC 60384-4
I L 0,3μA C R μF -------U R V -------?è?
???0,7
≤4μA +
225
10/02
Miniaturized – 85°C
B43304
Also available in a shorter version with a length of 4,5 –1 mm. For packing mode and ordering example see next page.
3terminals (length 4,5 –1 mm).
For packing mode and ordering example see next page . Dimensions (mm)Approx.weight (g)Packing units (pieces)d + 1l ± 2 22222222222225303540455091215182024160160160160160160252525252525
253035404550
131719222529
130130130130130130
Dimensions (mm)Approx.weight (g)Packing units (pieces)d + 1l ± 2 303030303030253035404550172329364146808080808080353535353535
253035404550
222936415670
606060606060
226
10/02
Miniaturized – 85°C
B43304
Packing of snap-in capacitors
For ecological reasons the packing is pure cardboard. Components can be withdrawn (in full or in part) in the correct position for insertion.Ordering codes Ordering example:B43304A9107M007}snap-in capacitor with short terminals B43304A9107M002
}
snap-in capacitor with 3 terminals
Snap-in terminals Version
Identification in 3rd block of ordering code Standard terminals (6,3 ± 1) mm M000Short terminals (4,5 ?1) mm M0073 terminals (4,5 ?1) mm M002
227
10/02
Miniaturized – 85°C
B43304
Overview of available types
U R (VDC)200250400450C R (μF)
Case dimensions d × l (mm)
8222 × 25
10022 × 2522 × 3025 × 2512022 × 3025 × 2522 × 3525 × 30150
22 × 3525 × 3022 × 4025 × 3030 × 25180
22 × 4025 × 3030 × 25
22 × 4525 × 3530 × 30220
22 × 25
22 × 4525 × 3530 × 3022 × 5025 × 4030 × 3035 × 2527022 × 30
22 × 5025 × 4030 × 3035 × 2525 × 4530 × 3535 × 3033022 × 2522 × 3025 × 2525 × 4530 × 3535 × 3030 × 4035 × 35390
22 × 3025 × 2522 × 3525 × 3025 × 5030 × 4035 × 3030 × 4535 × 35470
22 × 3525 × 3022 × 4025 × 3530 × 2530 × 4535 × 3530 × 5035 × 40560
22 × 3525 × 3022 × 4525 × 3530 × 3030 × 5035 × 40
35 × 45
68022 × 4025 × 3530 × 2522 × 5025 × 4030 × 3035 × 2535 × 45
820
22 × 4525 × 4030 × 3035 × 25
25 × 4530 × 3535 × 30
228
10/02
Miniaturized – 85°C
B43304
The capacitance and voltage ratings listed above are available in different cases upon request.Other voltage and capacitance ratings are also available upon request.
1000
25 × 4530 × 3535 × 3030 × 4035 × 35120025 × 5030 × 4035 × 3030 × 4535 × 35150030 × 4535 × 3535 × 45180030 × 5035 × 4035 × 50
2200
35 × 45
Overview of available types
U R (VDC)200250400450
C R (μF)
Case dimensions d × l (mm)
229
10/02
Miniaturized – 85°C
B43304
Technical data and ordering codes
U R
VDC C R
100 Hz 20 °C μF
Case
dimensions d × l mm ESR typ 100 Hz 20 °C m ?
Z max 10 kHz 20 °C m ?
I ~max 100 Hz 40 °C A
I ~R 1)100 Hz 85 °C A
Ordering code 2)
200
33022 × 254705602,71,2B43304A2337M00039022 × 30400480 3,11,4B43304A2397M00039025 × 254004803,21,4B43304B2397M00047022 × 353304003,61,6B43304A2477M00047025 × 303304003,71,7B43304B2477M00056022 × 352803304,01,8B43304A2567M00056025 × 302803304,11,8B43304B2567M00068022 × 402302804,62,1B43304A2687M00068025 × 352302804,72,1B43304B2687M00068030 × 252302804,62,1B43304C2687M00082022 × 451902305,32,4B43304A2827M00082025 × 401902305,52,5B43304B2827M00082030 × 301902305,42,4B43304C2827M00082035 × 251902305,62,6B43304D2827M000100025 × 451601906,32,9B43304A2108M000100030 × 351601906,22,8B43304B2108M000100035 × 301601906,63,0B43304C2108M000120025 × 501301607,23,3B43304A2128M000120030 × 401301607,23,3B43304B2128M000120035 × 301301607,23,3B43304C2128M000150030 × 451101308,43,8B43304A2158M000150035 × 351101308,53,9B43304B2158M000180030 × 50901108,74,0B43304A2188M000180035 × 40901108,94,0B43304B2188M0002200
35 × 45
70
90
10,2
4,6
B43304A2228M000
1)120 Hz conversion factor of ripple current: I ~ (120 Hz) = 1,03 · I ~ (100 Hz)2)Ordering code for standard terminals (6,3 mm).
To determine the ordering code for short terminals (4,5 mm) and 3 terminals (4,5 mm) see page 226.
230
10/02
Miniaturized – 85°C
B43304
250
22022 × 257008402,21,0B43304E2227M00027022 × 305706902,61,2B43304E2277M00033022 × 304705602,91,3B43304E2337M00033025 × 254705602,91,3B43304G2337M00039022 × 354004803,31,5B43304E2397M00039025 × 304004803,41,5B43304G2397M00047022 × 403304003,81,7B43304E2477M00047025 × 353304003,91,8B43304G2477M00047030 × 253304003,81,7B43304H2477M00056022 × 452803304,42,0B43304E2567M00056025 × 352803304,31,9B43304G2567M00056030 × 302803304,42,0B43304H2567M00068022 × 502302805,02,3B43304E2687M00068025 × 402302805,02,3B43304G2687M00068030 × 302302804,92,2B43304H2687M00068035 × 252302805,12,3B43304J2687M00082025 × 451902305,72,6B43304E2827M00082030 × 351902305,72,6B43304G2827M00082035 × 301902306,02,7B43304H2827M000100030 × 401601906,63,0B43304E2108M000100035 × 351601906,93,1B43304G2108M000120030 × 451301607,53,4B43304E2128M000120035 × 351301607,63,4B43304G2128M000150035 × 451101308,43,8B43304E2158M0001800
35 × 50
90
110
9,6
4,4
B43304E2188M000
1)120 Hz conversion factor of ripple current: I ~ (120 Hz) = 1,03 · I ~ (100 Hz)2)Ordering code for standard terminals (6,3 mm).
To determine the ordering code for short terminals (4,5 mm) and 3 terminals (4,5 mm) see page 226.
Technical data and ordering codes
U R
VDC C R
100 Hz 20 °C μF
Case
dimensions d × l mm ESR typ 100 Hz 20 °C m ?
Z max 10 kHz 20 °C m ?
I ~max 100 Hz 40 °C A
I ~R 1)100 Hz 85 °C A
Ordering code 2)
231
10/02
Miniaturized – 85°C
B43304
400
10022 × 25163019601,50,67B43304A9107M00012022 × 30136016301,70,79B43304A9127M00012025 × 25136016301,80,80B43304B9127M00015022 × 35109013102,00,93B43304A9157M00015025 × 30109013102,10,95B43304B9157M00018022 × 4091010902,41,1B43304A9187M00018025 × 3091010902,31,0B43304B9187M00018030 × 2591010902,41,1B43304C9187M00022022 × 457408902,71,2B43304A9227M00022025 × 357408902,71,2B43304B9227M00022030 × 307408902,81,3B43304C9227M00027022 × 506107303,21,4B43304A9277M00027025 × 406107303,11,4B43304B9277M00027030 × 306107303,11,4B43304C9277M00027035 × 256107303,21,5B43304D9277M00033025 × 455006003,61,6B43304A9337M00033030 × 355006003,61,6B43304B9337M00033035 × 305006003,81,7B43304C9337M00039025 × 504205104,11,9B43304A9397M00039030 × 404205104,11,9B43304B9397M00039035 × 304205104,11,9B43304C9397M00047030 × 453504204,72,1B43304A9477M00047035 × 353504204,72,2B43304B9477M00056030 × 503003505,32,4B43304A9567M00056035 × 403003505,42,5B43304B9567M000680
35 × 45
240
290
6,2
2,8
B43304A9687M000
1)120 Hz conversion factor of ripple current: I ~ (120 Hz) = 1,03 · I ~ (100 Hz)2)Ordering code for standard terminals (6,3 mm).
To determine the ordering code for short terminals (4,5 mm) and 3 terminals (4,5 mm) see page 226.
Technical data and ordering codes
U R
VDC C R
100 Hz 20 °C μF
Case
dimensions d × l mm ESR typ 100 Hz 20 °C m ?
Z max 10 kHz 20 °C m ?
I ~max 100 Hz 40 °C A
I ~R 1)100 Hz 85 °C A
Ordering code 2)
232
10/02
Miniaturized – 85°C
B43304
450
8222 × 25199023901,30,61B43304A5826M00010022 × 30163019601,60,72B43304A5107M00010025 × 25163019601,60,73B43304B5107M00012022 × 35136016301,80,83B43304A5127M00012025 × 30136016301,90,85B43304B5127M00015022 × 40109013102,20,98B43304A5157M00015025 × 30109013102,10,95B43304B5157M00015030 × 25109013102,20,98B43304C5157M00018022 × 4591010902,51,1B43304A5187M00018025 × 3591010902,41,1B43304B5187M00018030 × 3091010902,51,1B43304C5187M00022022 × 507408902,91,3B43304A5227M00022025 × 407408902,81,3B43304B5227M00022030 × 307408902,81,3B43304C5227M00022035 × 257408902,91,3B43304D5227M00027025 × 456107303,31,5B43304A5277M00027030 × 356107303,21,5B43304B5277M00027035 × 306107303,41,6B43304C5277M00033030 × 405006003,81,7B43304A5337M00033035 × 355006004,01,8B43304B5337M00039030 × 454205104,31,9B43304A5397M00039035 × 354205104,32,0B43304B5397M00047030 × 503504204,92,2B43304A5477M00047035 × 403504205,02,3B43304B5477M000560
35 × 45
300
350
5,6
2,6
B43304A5567M000
1)120 Hz conversion factor of ripple current: I ~ (120 Hz) = 1,03 · I ~ (100 Hz)2)Ordering code for standard terminals (6,3 mm).
To determine the ordering code for short terminals (4,5 mm) and 3 terminals (4,5 mm) see page 226.
Technical data and ordering codes
U R
VDC C R
100 Hz 20 °C μF
Case
dimensions d × l mm ESR typ 100 Hz 20 °C m ?
Z max 10 kHz 20 °C m ?
I ~max 100 Hz 40 °C A
I ~R 1)100 Hz 85 °C A
Ordering code 2)
233
10/02
Miniaturized – 85°C
B43304
Useful life
depending on ambient temperature T A under ripple current operating conditions 1)
1)Refer to page 40 for an explanation on how to interpret the useful life graphs.
Frequency factor of
permissible ripple current I ~versus frequency f
Frequency characteristics of ESR Typical behavior
234
10/02
Miniaturized – 85°C
B43304
Impedance Z
versus frequency f
Typical behavior at 20 °C
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 801709, 81617 München, DEUTSCHLAND
( ++49 89 636 09, FAX (089) 636-2 2689
EPCOS AG 2002. Vervielf?ltigung, Ver?ffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne aus-drückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elek-troindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Lieferm?glichkeiten richten Sie bitte an den Ihnen n?chstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente k?nnen aufgrund technischer Erfordernisse Gefahrstoffe ent-halten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zust?ndige Vertriebsgesellschaft ein-zuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
( ++49 89 636 09, FAX (089) 636-2 2689
EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representa-tives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.