文档库 最新最全的文档下载
当前位置:文档库 › ENC-5146_User Manual_V1.7

ENC-5146_User Manual_V1.7

ENC-5146_User Manual_V1.7
ENC-5146_User Manual_V1.7

ENC-5146

Embedded CPU Board with Intel? Atom?Z5XX Serial CPU, VGA, LAN, Audio

User Manual

Version:1.2

版权所有

This document is copyrighted, ? 2008. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third parties that may result from such use.

特别鸣谢

Award is a trademark of Award Software International, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation.

Microsoft Windows? is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

All other product names or trademarks are properties of their respective owners.

For more information, technical support and service about the board or other products, please visit our websites at: https://www.wendangku.net/doc/223732407.html,

装箱清单:

Before you begin installing your computer, please make sure that the following materials have been shipped:

● 1 ENC-B406 EPIC SBC

● 1 ENC-Z510 CPU core module

● Cooler

可选配件

COM2 Cable

COM3-6 Cable

LPT CABLE

MIO-1003接口板和Cable

ICN-M200 VGA显示模块

ICN-M202 HDMI显示模块

PI-686 SATA 接口板和FFC Cable

订购信息

Model No. List Description

ENC-5146-F Base Board For ENC-Z510 With Giga LAN、10/100M Base-T LAN、6XCOM、1XLPT、AUDIO、PS/2 keyboard&mouse、18/24Bit LVDS、6 Bit GPIO、CompactFlash、6XUSB、

SATA、PC104+ Slot

ENC-5146-G Base Board For ENC-Z510 With Giga LAN、10/100M Base-T LAN、6XCOM、1XLPT、AUDIO、PS/2 keyboard&mouse、18/24Bit LVDS、6 Bit GPIO、CompactFlash、6XUSB、

目录

装箱清单: (2)

订购信息 (2)

Chapter 1 General Information (6)

1.1 CMS-Z510 规格说明 (6)

1:1.1 产品图片 (6)

1.1.2系统规格 (7)

1.1.3 CMS-Z510板载输入输出I/O接口(背面) (7)

1.2 ENC-5146 Specifications (8)

1.2.1 ENC-5146系统规格 (8)

1.2.2 ENC-5146板载输入输出接口(正面) (9)

1.2.3 ENC-5146板载输入输出接口(反面) (9)

1.2.4 ENC-5146尺寸图 (10)

Chapter 2 Installation (12)

2.1 On Board I/O Pinheader (12)

2.1.1 Jumpers (12)

Chapter 3 软件安装与使用 (23)

Windows XP/VISTA下显卡驱动安装注意事项:

3.1 (23)

关于在VISTA下使用HDMI显示输出时的音频输出设置注意事项:

3.2 (25)

高清视频播放的支持

3.3 (27)

Chapter 4 AMI BIOS Setup (30)

4.1 Main 菜单 (30)

4.2 Advanced 菜单 (30)

4.2.1 CPU Configuration (31)

4.2.2 IDE Configuration (32)

4.2.3 SupperIO Configuration (33)

4.2.4 Hardware Health Configuration (34)

4.2.5 ACPI Configuration (34)

4.2.6 MPS Configuration (37)

4.2.7 PCI Express Configuration (38)

4.2.8 Smbios Configuration (39)

4.2.9 USB Configuration (39)

4.3 PCIPNP (41)

4.4 Boot 菜单 (42)

4.4.2 Boot Device Priority (44)

4.4.3 Hard Disk Drives (45)

4.5 (45)

Security 菜单

Chipset 菜单

4.6 (46)

4.6.1 North Bridge Configuration (47)

4.6.2 South Bridge Configuration (48)

4.7 (50)

Exit 菜单

BIOS 刷新

4.8 (50)

SCH3116 GPIO/WDT 使用说明 (52)

SCH3116 GPIO/WDT 使用说明 (53)

GPIO编程模型

5.2 (53)

GPIO配置寄存器中各bit的详细描述见下表。

5.2.1 (53)

各GPIO对应的配置寄存器的I/O地址见下表。

5.2.2 (53)

5.2.3 各GPIO对应的数据寄存器的I/O地址见下表。 (53)

GPIO示例程序

5.3 (54)

5.3.1 设置GP27输出为0 (54)

5.3.2设置GP27输出为1 (54)

5.3.3配置GP47 (55)

WDT编程模型

5.4 (56)

WDT示例程序

5.5 (56)

Chapter 1 General Information

This chapter gives background information on the ENC-B406&CMS-Z510 Sections include:

?Introduction

?Features

?Specifications

?Board layout and dimensions

Chapter 1 General Information 1.1 CMS-Z510 规格说明

1:1.1 产品图片

1.1.2系统规格

处理器:Intel? Atom? processor Silverthorn-XL Z510P-1.1GHz,Option Z530P-1.6GHz New

single-core processor for mobile devices

100-MHz and 133-MHz Source-Synchronous front side bus (FSB)

□ 100 MHz: Intel? Atom? processor Z510P

□ 133 MHz: Intel? Atom? processor Z530P

Supports Hyper-Threading Technology 2-threads

On die 512-kB, 8-way L2 cache

Support for IA 32-bit architecture

Intel? Virtualization Technology (Intel? VT)

Intel? SSE2 and Intel? SSE3 and SSSE3 support

芯片组:Intel? System Controller Hub US15WP SOC Chipset

Support 400/533MHz FSB

Support DDR2 400/533

Support PATA support

Support 8 USB 2.0 port

Support ACPI 2.0

Support Extensive Power Management

内存:载1GB DDR2 Memory

总线接口:个PCIe x 1 Bus

看门狗:-255秒

显示功能:Intel? System Controller Hub US15WP芯片组内建Intel? Graphics Media Accelerator 500 integrated graphics (2D and 3D),最大静态显存可共享系统内存8MB

Supports full hardware acceleration of video decode standards, such as H.264, MPEG2,

MPEG4, VC1, and WMV9;

显示最高分辨率可达1080P,支持16:9/16:10宽屏显示

SDVO Display Output, Support VGA、DVI、TV、HDMI Display Port

单通道18/24Bit LVDS LCD

支持双屏同步,双屏异步显示(For Windows XP、XP Embedded、Linux)

存储: Support IDE ATA100

Audio: Intel? High Definition Audio support 5.1 channel, SPDIF

1.1.3 CMS-Z510板载输入输出I/O接口(背面)

1.2 ENC-5146 Specifications

1.2.1 ENC-5146系统规格

网络:1个10/100/1000Mbps速率自侦测以太网口,采用Realtek RTL8111C网络芯片

1个10/100Mbps速率自侦测以太网口,采用Realtek RTL8100CL网络芯片

显示:SDVO排针显示输出,连接SDVO显示模块

1.27mm间距18/24Bit单通道LVDS输出

DF13-20Pin

USB:6个USB 2.0/1.1,支持系统引导

Supper I/O:SMSC3116 Supper I/O芯片

COM1-COM4支持9线制RS232,其中COM2支持跳线可选择RS232/RS422/RS485

COM5-COM6支持3线制RS232

1个ECP/SPP模式LPT

PS/2 Mouse&Keyboard,并联1个6Pin wafer Pinheader

6Bit GPIO

存储:1个标准SATA接口,并联1个FPC SATA接口

1个44PIN IDE 接口,并联1个CompactFlash Socket

扩展总线:PERICOM PI7C9X112SL PCI Express-to-PCI Reversible Bridge

PC/104 PLUS 32Bit PCI Bus插槽,可以支持3个独立INT的PCI设备

Audio: Intel? High Definition Audio, Realtek ALC833 codec support 5.1 channel

BIOS:8MB位AMI BIOS,支持开机LOGO定制

蜂鸣器:蜂鸣器

电源:DC +12V@3A输入,AT/ATX电源输入跳线可选

尺寸:65 x 115mm

Layer:6层

Back I/0 Port:

1个DB9 COM1 Port

1个PS/2 Keyboard/Mouse Port

2个直立USB2.0/1.1 Port

1个10/100M Base_T RJ45 With state LED

1个10/100/1000M Base_T RJ45 With state LED

1.2.2 ENC-5146板载输入输出接口(正面)

1.2.3 ENC-5146板载输入输出接口(反面)

1.2.4 ENC-5146尺寸图

若需要更详细的尺寸资料,可向销售代表索取AUTOCAD图纸文件

Chapter 2

Installation

Installation

This chapter explains the setup procedures of the

ENC-B406&ENC-Z510 hardware, including instructions on setting jumpers and connecting peripherals, switches and indicators. Be sure to read all safety precautions before you begin the installation procedure.

Chapter 2 Installation

2.1 On Board I/O Pinheader

2.1.1 Jumpers

The ENC-5146 as a number of jumpers that allow you to configure your system to suit your application. The table below lists the functions of the various jumpers.

Lable Function

description

J20 Clear

CMOS

1-2 open clear coms

1-2 short keep coms(Default)

J25 Jumper

Select

1-2 short CompactFlash Master

1-2 open CompactFlash Slave (Default)

*IDE1和CompactFlash不能同时使用,只能选择其一

3-4 open AT power supply(Default)

3-4 short power supply

5-6 open 有电池工作(Default)

5-6 short 无电池工作,此时系统时间无法保存,每一次上电时,需等待3秒才能开机

7-8 open 40Pin IDE1 HDD Cable

7-8 short 80Pin IDE1 HDD Cable

9-10 open SATA HDD Slave(Default)

9-10 short SATA HDD Master

*IDE1和CompactFlash不能同时使用,只能选择其一

A1、SATA1 —Standard Desktop SATA Interface Header

Description: CONN SATA 台式机立式DIP-7P

Pin Signal Pin Signal 1 GND 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND

A2、J17 —FPC SATA Interface Header

Description: CONN FPC Aces 85201-1606L 1.0mm H1.9 Top SMT-16P LF

Pin Signal Pin

Signal 1 GND 2 GND 3 VCC(5V) 4 VCC(5V) 5 VCC(5V) 6 GND

7 GND

8 VCC(3.3V) 9 VCC(3.3V) 10 GND 11 RXP 12 RXN 13 GND 14 TXN 15 TXP 16 GND

A3、IDE1—Standard 44Pin IDE Interface Header(TOP)

Description: PIN HEADER 2*22 BOX DIP MALE SQUARE PIN 2.0mm Pitch

Pin Signal

Pin Signal 1—40Pin is Standard IDE signal

41 +5V 42 +5V 43 GND

44 NC

A4、LVDS1 – 18/24Bit Single Channel LVDS LCD Interface Header

Description: PIN HEADER 2*10 DF13A-20DP-1.25C MALE SQUARE

Pin Signal Pin Signal

1 +3.3VDC

2 +3.3VDC

3 GND

4 GND

5 RXIN0-

6 RXIN0+

7 GND 8 RXIN1-

9 RXIN1+ 10 GND

11 RXIN2- 12 RXIN2+

13 GND 14 RXCLK-

15 RXCLK+ 16 GND

17 RXIN3- 18 RXIN3+

19 GND 20 +5VDC

A5、J19—Inverter Interface Header(TOP)

Description:Wafer Header DIP 5*1 2.54mm Pitch(面向缺口左边为PIN1)

5

1

1 +12V

2 GND

3 LVDS_BKLTEN

4 LVDS_BKLTCTL

5 +5V

A6、J21、J22—USB3-6 Port Interface Header(TOP)

Description: PIN HEADER 2*5P BOX DIP MALE SQUARE PIN 2.0mm Pitch

Pin Signal Pin Signal

1 USB VCC(5V)

2 USB VCC(5V)

3 DATA 0 -

4 DATA 1 -

5 DATA 0 +

6 DATA 1 +

7 GND 8 GND

9 GND 10 N/C

A7、PCI1—PC/104 PCI Bus Slot Interface Header(TOP)

Description: CONN Header 4X30 2.54mm PC104 PCI slot DIP-120P(中断支持3个独立PCI设备)

Pin Row A Row B

1 GND NC

2 +3.3V PCI-AD2

3 PCI-AD5 GND

4 PCI-C/BE0 PCI-AD7

5 GND PCI-AD9

6 PCI-AD11 +3.3V

7 PCI-AD14 PCI-AD13

8 +3.3V PCI-C/BE1

9 SERR# GND

10 GND PERR#

11 PCI-STOP +3.3V

12 +3.3V PCI-TRDY

13 PCI-FRAME GND

14 GND PCI-AD16

15 PCI-AD18 +3.3V

16 PCI-AD21 PCI-AD20

17 +3.3V PCI-AD23

18 PCI-AD16 GND

19 PCI-AD24 PCI-C/BE3

20 GND PCI-AD26

21 PCI-AD29 +5V

22 +5V PCI-AD30

PC0 GND

23 REQ

PC2

24 GND REQ

25 GNT

PC1 +3.3V

26 +5V CLK-PC0

27 CLK-PC2 +5V

28 GND PCI-INTD

29 +12V PCI-INTA

PC3

30 -12V REQ

Pin Row C Row D

1 +5V PCI-AD0

2 PCI-AD1 +5V

3 PCI-AD

4 PCI-AD3

4 GND PCI-AD6

5 PCI-AD8 GND

6 PCI-AD10 100K-DGN

7 GND PCI-AD12

8 PCI-AD15 +3.3V

9 NC PCI-PAR

10 +3.3V NC

11 LOCK# GND

12 GND PCI-DEVSEL

13 PCI-IRDY +3.3V

14 +3.3V PCI-C/BE2

15 PCI-AD17 GND

16 GND PCI-AD19

17 PCI-AD22 +3.3V

18 PCI-AD17 PCI-AD18

19 +3.3V PCI-AD19

20 PCI-AD25 GND

21 PCI-AD28 PCI-AD27

22 GND PCI-AD31

PC1 +3.3V

23 REQ

PC0

24 +5V GNT

PC2 GND

25 GNT

26 GND CLK-PC1

27 CLK-PC3 GND

28 +5V PCI-RST

29 PCI-INTB PCI-INTC

PC3 GND

30 GNT

A8、AUDIO1—2.0 Channel Audio Interface Header(TOP)

Description: PIN HEADER 2*6P SMT MALE SQUARE PIN 2.0mm Pitch

Pin Signal Pin Signal

1 GND

2 GND

3 FRONT OUT1 R

4 LINE1-L-IN

5 GND

6 GND

7 FRONT OUT1 L

8 LINE1 R IN

9 MIC1 L IN 10 GND

A9、J9—6Bit GPIO Interface Header(TOP)

Description: PIN HEADER 2*4 180D SMD MALE SQUARE PIN 2.0mm Pitch

Pin Signal Pin Signal

1 GND

2 +5V

3 GPIO0

4 GPIO1

5 GPIO2

6 GPIO3

7 GPIO4

8 GPIO5 Remark:GPIO可通过软件自由定义输入输出功能

A10、J10—Com2-6 5 COM Port Interface Header(TOP)

Description: PIN HEADER 2*19P BOX DIP MALE SQUARE PIN 2.0mm Pitch

Pin Signal Pin Signal

1 DCD#

2 2 RXD#2

3 TXD2

4 DTR#2

5 GND

6 DSR#2

7 RTS2

8 CTS#2

9 RI#2 10 NC

11 DCD#3 12 RXD#3 13 TXD3 14 DTR#3 15 GND 16 DSR#3 17 RTS3 18 CTS#3 19 RI#3 20 NC

21 DCD#4 22 RXD#4 23 TXD4 24 DTR#4 25 GND 26 DSR#4 27 RTS4 28 CTS#4 29 RI#4 30 NC

31 RXD#5 32 TXD5 33 GND 34 NC

35 RXD#6 36 TXD6

A11、J14—LPT Printer Port Interface Header(TOP)

Description: PIN HEADER 2*13P DIP MALE SQUARE PIN 2.0mm Pitch

Pin Signal Pin Signal

1 STB#

2 AFD#

3 PD0

4 ERR#

5 PD1

6 INIT#

7 Pd2

8 LIN#

9 Pd3 10 GND 11 Pd4 12 GND

13 PD5 14 GND

15 PD6 16 GND

17 PD7 18 GND

19 ACK# 20 GND

21 BUSY 22 GND

23 PE 24 GND

25 SLCT 26 GND

A12、J12—Com2 RS232/422/485 Select Jumper Interface Header Description: PIN HEADER 2*3 180D SMD MALE SQUARE PIN 2.0mm Pitch

Setting Function Setting Function (1 - 2) RS485 (3 - 4) RS422

(5 - 6) RS232

A13、J11—Com2 RS422/485 Interface Header

Description: PIN HEADER 2*2 180D SMD MALE SQUARE PIN 2.0mm Pitch

Pin Signal Pin Signal

1 422-D-

2 422-D+

3 485-D-

4 485-D+

5 GND

6 GND

A14、J24-Panel Control HDD LED/POWER LED/RESET Interface Header Description: PIN HEADER 2*3 180D SMD MALE SQUARE PIN 2.0mm Pitch

Pin Signal Pin Signal

1 Power LED +(+5V)

2 Power LED -(GND)

3 HDD LED +

4 HDD LED –

5 RESET BOTTOM+

6 RESET BOTTOM–

7 POWER BOTTOM+ 8 POWER BOTTOM-

A15、JPW1—DC Power Input Interface Header(TOP)

Description:PWR Header_R 2X2Pin 4.20mm DIP

Pin Signal Pin Signal

1 GND

2 GND

3 DC +12

4 DC +12-19V Warning:ENC-5146 support single DC +12V@3A power input

A16、J13—PS/2 Keyboard And Mouse Port Interface Header(TOP)

Description: Pin Header 6*1 DIP MALE SQUARE PIN 2.54mm Pitch(面向缺口左边为PIN1)

Pin Signal Pin Signal

DATA

1 KB_CLK

2 KB

CLK 4 GND

3 MS

DATA

5 +5V

6 MS

A17、BZ1—Speaker Interface Header

Description:Header 1*2 DIP MALE SQUARE 2.54mm Pitch

Pin Signal Pin Signal

1 Speaker

2 GND

A18、CF1—Type I Compact Flash Slot Interface Header (BOT)

Description: SLOT CF CFH050-C7-0100 Card typeI Stand-off1.65mm SMT-50P

Pin Signal Pin Signal

1 GND

2 D3

3 D

4 4 D5

5 D

6 6 D7

7 CS#1 8 A10

9 OE# 10 A9

11 A8 12 A7

13 +3.3V 14 A6

15 A5 16 A4

17 A3 18 A2

19 A1 20 A0

21 D0 22 D1

23 D2 24 IOCS16#

25 CF 26 CF

27 D1 28 D1

29 D1 30 D1

31 D1 32 CS#3

33 NC 34 IOR#

35 IOW# 36 WE#

37 IRQ15 38 +3.3V

39 CF 40 NC

41 RST# 42 IOPDY

43 DREQ 44 DACK#

45 CF 46 CF

47 D8 48 D9

49 D10 50 GND

A19、J8—SDVO Display Interface Header (BOT)

Description: 1.27mm Pitch 2x10 Fremale SMT

Pin Signal Pin Signal

1 GND

2 +V3.3VS

3 SDVO-RED

4 +V3.3VS

5 SDVO-RED#

6 GND

7 GND 8 SDVO-CLK

9 SDVO-GREEN 10 SDVO-CLK#

11 GND 12 GND

13 GND 14 SDVO-CTRLDATA 15 SDVO-BLUE 16 SDVO-CTRLDATA# 17 SDVO-BLUE# 18 +5VS

RST# 20 +5VS

19 BUF

21 SDVO-TVCLKIN 22 +5VS

23 SDVO-TVCLKIN 24 GND

25 GND 26 SDVO-INT

相关文档