离子注入机 ion implanter
LSS理论 Lindhand Scharff and Schiott theory 又称“林汉德-斯卡夫-斯高特理论”。
沟道效应 channeling effect
射程分布 range distribution
深度分布 depth distribution
投影射程 projected range
阻止距离 stopping distance
阻止本领 stopping power
标准阻止截面 standard stopping cross section
退火 annealing
激活能 activation energy
等温退火 isothermal annealing
激光退火 laser annealing
应力感生缺陷 stress-induced defect
择优取向 preferred orientation
制版工艺 mask-making technology
图形畸变 pattern distortion
初缩 first minification
精缩 final minification
母版 master mask
铬版 chromium plate
干版 dry plate
乳胶版 emulsion plate
透明版 see-through plate
高分辨率版 high resolution plate, HRP
超微粒干版 plate for ultra-microminiaturization 掩模 mask
掩模对准 mask alignment
对准精度 alignment precision
光刻胶 photoresist
又称“光致抗蚀剂”。
负性光刻胶 negative photoresist
正性光刻胶 positive photoresist
无机光刻胶 inorganic resist
多层光刻胶 multilevel resist
电子束光刻胶 electron beam resist
X射线光刻胶 X-ray resist
刷洗 scrubbing
甩胶 spinning
涂胶 photoresist coating
后烘 postbaking
光刻 photolithography
X射线光刻 X-ray lithography
电子束光刻 electron beam lithography 离子束光刻 ion beam lithography
深紫外光刻 deep-UV lithography
光刻机 mask aligner
投影光刻机 projection mask aligner 曝光 exposure
接触式曝光法 contact exposure method
接近式曝光法 proximity exposure method
光学投影曝光法 optical projection exposure method 电子束曝光系统 electron beam exposure system
分步重复系统 step-and-repeat system
显影 development
线宽 linewidth
去胶 stripping of photoresist
氧化去胶 removing of photoresist by oxidation
等离子[体]去胶 removing of photoresist by plasma 刻蚀 etching
干法刻蚀 dry etching
反应离子刻蚀 reactive ion etching, RIE
各向同性刻蚀 isotropic etching
各向异性刻蚀 anisotropic etching
反应溅射刻蚀 reactive sputter etching
离子铣 ion beam milling
又称“离子磨削”。
等离子[体]刻蚀 plasma etching
钻蚀 undercutting
剥离技术 lift-off technology
又称“浮脱工艺”。
终点监测 endpoint monitoring
金属化 metallization
互连 interconnection
多层金属化 multilevel metallization
电迁徙 electromigration
回流 reflow
磷硅玻璃 phosphorosilicate glass
硼磷硅玻璃 boron-phosphorosilicate glass
钝化工艺 passivation technology
多层介质钝化 multilayer dielectric passivation 划片 scribing
电子束切片 electron beam slicing
烧结 sintering
印压 indentation
热压焊 thermocompression bonding 热超声焊 thermosonic bonding
冷焊 cold welding
点焊 spot welding
球焊 ball bonding
楔焊 wedge bonding
内引线焊接 inner lead bonding
外引线焊接 outer lead bonding
梁式引线 beam lead
装架工艺 mounting technology
附着 adhesion
封装 packaging
金属封装 metallic packaging
陶瓷封装 ceramic packaging
扁平封装 flat packaging
塑封 plastic package
玻璃封装 glass packaging
微封装 micropackaging
又称“微组装”。
管壳 package
管芯 die
引线键合 lead bonding
引线框式键合 lead frame bonding
带式自动键合 tape automated bonding, TAB
激光键合 laser bonding
超声键合 ultrasonic bonding
红外键合 infrared bonding
微电子辞典
Abrupt junction 突变结 Accelerated testing 加速实验Acceptor 受主 Acceptor atom 受主原子
Accumulation 积累、堆积 Accumulating contact 积累接触Accumulation region 积累区 Accumulation layer 积累层Active region 有源区 Active component 有源元
Active device 有源器件 Activation 激活
Activation energy 激活能 Active region 有源(放大)区
Admittance 导纳 Allowed band 允带
Alloy-junction device合金结器件 Aluminum(Aluminium) 铝
Aluminum – oxide 铝氧化物 Aluminum passivation 铝钝化
Ambipolar 双极的 Ambient temperature 环境温度
Amorphous 无定形的,非晶体的 Amplifier 功放扩音器放大器
Analogue(Analog) comparator 模拟比较器 Angstrom 埃
Anneal 退火 Anisotropic 各向异性的
Anode 阳极 Arsenic (AS) 砷
Auger 俄歇 Auger process 俄歇过程
Avalanche 雪崩 Avalanche breakdown 雪崩击穿
Avalanche excitation雪崩激发
Background carrier 本底载流子 Background doping 本底掺杂
Backward 反向 Backward bias 反向偏置
Ballasting resistor 整流电阻 Ball bond 球形键合
Band 能带 Band gap 能带间隙
Barrier 势垒 Barrier layer 势垒层
Barrier width 势垒宽度 Base 基极
Base contact 基区接触 Base stretching 基区扩展效应
Base transit time 基区渡越时间 Base transport efficiency基区输运系数
Base-width modulation基区宽度调制 Basis vector 基矢
Bias 偏置 Bilateral switch 双向开关
Binary code 二进制代码Binary compound semiconductor 二元化合物半导体Bipolar 双极性的 Bipolar Junction Transistor (BJT)双极晶体管
Bloch 布洛赫 Blocking band 阻挡能带
Blocking contact 阻挡接触 Body - centered 体心立方
Body-centred cubic structure 体立心结构 Boltzmann 波尔兹曼Bond 键、键合 Bonding electron 价电子
Bonding pad 键合点 Bootstrap circuit 自举电路Bootstrapped emitter follower 自举射极跟随器Boron 硼Borosilicate glass 硼硅玻璃 Boundary condition 边界条件Bound electron 束缚电子 Breadboard 模拟板、实验板
Break down 击穿 Break over 转折
Brillouin 布里渊 Brillouin zone 布里渊区
Built-in 内建的 Build-in electric field 内建电场
Bulk 体/体内 Bulk absorption 体吸收
Bulk generation 体产生 Bulk recombination 体复合
Burn - in 老化 Burn out 烧毁
Buried channel 埋沟 Buried diffusion region 隐埋扩散区
Can 外壳 Capacitance 电容
Capture cross section 俘获截面 Capture carrier 俘获载流子Carrier 载流子、载波 Carry bit 进位位
Carry-in bit 进位输入 Carry-out bit 进位输出
Cascade 级联 Case 管壳
Cathode 阴极 Center 中心
Ceramic 陶瓷(的) Channel 沟道
Channel breakdown 沟道击穿 Channel current 沟道电流Channel doping 沟道掺杂 Channel shortening 沟道缩短
Channel width 沟道宽度 Characteristic impedance 特征阻抗
Charge 电荷、充电 Charge-compensation effects 电荷补偿效应
Charge conservation 电荷守恒 Charge neutrality condition 电中性条件
Charge drive/exchange/sharing/transfer/storage 电荷驱动/交换/共享/转移/存储
Chemmical etching 化学腐蚀法 Chemically-Polish 化学抛光
Chemmically-Mechanically Polish (CMP) 化学机械抛光 Chip 芯片
Chip yield 芯片成品率 Clamped 箝位
Clamping diode 箝位二极管 Cleavage plane 解理面
Clock rate 时钟频率 Clock generator 时钟发生器
Clock flip-flop 时钟触发器 Close-packed structure 密堆积结构
Close-loop gain 闭环增益 Collector 集电极
Collision 碰撞 Compensated OP-AMP 补偿运放
Common-base/collector/emitter connection 共基极/集电极/发射极连接
Common-gate/drain/source connection 共栅/漏/源连接
Common-mode gain 共模增益 Common-mode input 共模输入
Common-mode rejection ratio (CMRR) 共模抑制比
Compatibility 兼容性 Compensation 补偿
Compensated impurities 补偿杂质 Compensated semiconductor 补偿半导体Complementary Darlington circuit 互补达林顿电路
Complementary Metal-Oxide-Semiconductor Field-Effect-Transistor(CMOS)
互补金属氧化物半导体场效应晶体管
Complementary error function 余误差函数
Computer-aided design (CAD)/test(CAT)/manufacture(CAM) 计算机辅助设计/ 测试 /制造
Compound Semiconductor 化合物半导体 Conductance 电导
Conduction band (edge) 导带(底) Conduction level/state 导带态
Conductor 导体 Conductivity 电导率
Configuration 组态 Conlomb 库仑
Conpled Configuration Devices 结构组态 Constants 物理常数
Constant energy surface 等能面 Constant-source diffusion恒定源扩散
Contact 接触 Contamination 治污
Continuity equation 连续性方程 Contact hole 接触孔
Contact potential 接触电势 Continuity condition 连续性条件
Contra doping 反掺杂 Controlled 受控的
Converter 转换器 Conveyer 传输器
Copper interconnection system 铜互连系统Couping 耦合
Covalent 共阶的 Crossover 跨交
Critical 临界的 Crossunder 穿交
Crucible坩埚 Crystal defect/face/orientation/lattice 晶体缺陷/晶面/晶向/晶格
Current density 电流密度 Curvature 曲率
Cut off 截止 Current drift/dirve/sharing 电流漂移/驱动/共享
Current Sense 电流取样 Curvature 弯曲
Custom integrated circuit 定制集成电路 Cylindrical 柱面的Czochralshicrystal 直立单晶
Czochralski technique 切克劳斯基技术(Cz法直拉晶体J)
Dangling bonds 悬挂键 Dark current 暗电流
Dead time 空载时间 Debye length 德拜长度
德布洛意 Decderate 减速
Decibel (dB) 分贝 Decode 译码
Deep acceptor level 深受主能级 Deep donor level 深施主能级
Deep impurity level 深度杂质能级 Deep trap 深陷阱
Defeat 缺陷
Degenerate semiconductor 简并半导体 Degeneracy 简并度
Degradation 退化 Degree Celsius(centigrade) /Kelvin 摄氏/开氏温度Delay 延迟 Density 密度
Density of states 态密度 Depletion 耗尽
Depletion approximation 耗尽近似 Depletion contact 耗尽接触
Depletion depth 耗尽深度 Depletion effect 耗尽效应
Depletion layer 耗尽层 Depletion MOS 耗尽MOS
Depletion region 耗尽区 Deposited film 淀积薄膜
Deposition process 淀积工艺 Design rules 设计规则
Die 芯片(复数dice) Diode 二极管
Dielectric 介电的 Dielectric isolation 介质隔离
Difference-mode input 差模输入 Differential amplifier 差分放大器Differential capacitance 微分电容 Diffused junction 扩散结
Diffusion 扩散 Diffusion coefficient 扩散系数
Diffusion constant 扩散常数 Diffusivity 扩散率
Diffusion capacitance/barrier/current/furnace 扩散电容/势垒/电流/炉Digital circuit 数字电路 Dipole domain 偶极畴
Dipole layer 偶极层 Direct-coupling 直接耦合
Direct-gap semiconductor 直接带隙半导体 Direct transition 直接跃迁Discharge 放电 Discrete component 分立元件
Dissipation 耗散 Distribution 分布
Distributed capacitance 分布电容 Distributed model 分布模型
Displacement 位移 Dislocation 位错
Domain 畴 Donor 施主
Donor exhaustion 施主耗尽 Dopant 掺杂剂
Doped semiconductor 掺杂半导体 Doping concentration 掺杂浓度
Double-diffusive MOS(DMOS)双扩散MOS.
Drift 漂移 Drift field 漂移电场
Drift mobility 迁移率 Dry etching 干法腐蚀
Dry/wet oxidation 干/湿法氧化 Dose 剂量
Duty cycle 工作周期 Dual-in-line package (DIP)双列直插式封装
Dynamics 动态 Dynamic characteristics 动态属性
Dynamic impedance 动态阻抗
Early effect 厄利效应 Early failure 早期失效
Effective mass 有效质量 Einstein relation(ship) 爱因斯坦关系
Electric Erase Programmable Read Only Memory(E2PROM) 一次性电可擦除只读存储器Electrode 电极 Electrominggratim 电迁移
Electron affinity 电子亲和势 Electronic -grade 电子能
Electron-beam photo-resist exposure 光致抗蚀剂的电子束曝光
Electron gas 电子气 Electron-grade water 电子级纯水
Electron trapping center 电子俘获中心 Electron Volt (eV) 电子伏
Electrostatic 静电的 Element 元素/元件/配件
Elemental semiconductor 元素半导体 Ellipse 椭圆
Ellipsoid 椭球 Emitter 发射极
Emitter-coupled logic 发射极耦合逻辑Emitter-coupled pair 发射极耦合对
Emitter follower 射随器 Empty band 空带
Emitter crowding effect 发射极集边(拥挤)效应
Endurance test =life test 寿命测试 Energy state 能态
Energy momentum diagram 能量-动量(E-K)图 Enhancement mode 增强型模式Enhancement MOS 增强性MOS Entefic (低)共溶的
Environmental test 环境测试 Epitaxial 外延的
Epitaxial layer 外延层 Epitaxial slice 外延片
Expitaxy 外延 Equivalent curcuit 等效电路
Equilibrium majority /minority carriers 平衡多数/少数载流子
Erasable Programmable ROM (EPROM)可搽取(编程)存储器
Error function complement 余误差函数
Etch 刻蚀 Etchant 刻蚀剂
Etching mask 抗蚀剂掩模 Excess carrier 过剩载流子
Excitation energy 激发能 Excited state 激发态
Exciton 激子 Extrapolation 外推法
Extrinsic 非本征的 Extrinsic semiconductor 杂质半导体
Face - centered 面心立方 Fall time 下降时间
Fan-in 扇入 Fan-out 扇出
Fast recovery 快恢复 Fast surface states 快界面态
Feedback 反馈 Fermi level 费米能级
Fermi-Dirac Distribution 费米-狄拉克分布 Femi potential 费米势
Fick equation 菲克方程(扩散) Field effect transistor 场效应晶体管Field oxide 场氧化层 Filled band 满带
Film 薄膜 Flash memory 闪烁存储器
Flat band 平带 Flat pack 扁平封装
Flicker noise 闪烁(变)噪声 Flip-flop toggle 触发器翻转
Floating gate 浮栅 Fluoride etch 氟化氢刻蚀
Forbidden band 禁带 Forward bias 正向偏置
Forward blocking /conducting正向阻断/导通
Frequency deviation noise频率漂移噪声
Frequency response 频率响应 Function 函数
Gain 增益 Gallium-Arsenide(GaAs) 砷化钾
Gamy ray r 射线 Gate 门、栅、控制极
Gate oxide 栅氧化层 Gauss(ian)高斯
Gaussian distribution profile 高斯掺杂分布Generation-recombination 产生-复合
Geometries 几何尺寸 Germanium(Ge) 锗
Graded 缓变的 Graded (gradual) channel 缓变沟道
Graded junction 缓变结 Grain 晶粒
Gradient 梯度 Grown junction 生长结
Guard ring 保护环 Gummel-Poom model 葛谋-潘模型
Gunn - effect 狄氏效应
Hardened device 辐射加固器件 Heat of formation 形成热
Heat sink 散热器、热沉 Heavy/light hole band 重/轻空穴带
Heavy saturation 重掺杂 Hell - effect 霍尔效应
Heterojunction 异质结 Heterojunction structure 异质结结构
Heterojunction Bipolar Transistor(HBT)异质结双极型晶体
High field property 高场特性
High-performance MOS.( H-MOS)高性能MOS. Hormalized 归一化
Horizontal epitaxial reactor 卧式外延反应器 Hot carrior 热载流子
Hybrid integration 混合集成
Image - force 镜象力 Impact ionization 碰撞电离
Impedance 阻抗 Imperfect structure 不完整结构
Implantation dose 注入剂量 Implanted ion 注入离子
Impurity 杂质 Impurity scattering 杂志散射
Incremental resistance 电阻增量(微分电阻)In-contact mask 接触式掩模
Indium tin oxide (ITO) 铟锡氧化物 Induced channel 感应沟道
Infrared 红外的 Injection 注入
Input offset voltage 输入失调电压 Insulator 绝缘体
Insulated Gate FET(IGFET)绝缘栅FET Integrated injection logic集成注入逻辑Integration 集成、积分 Interconnection 互连
Interconnection time delay 互连延时 Interdigitated structure 交互式结构
Interface 界面 Interference 干涉
International system of unions国际单位制 Internally scattering 谷间散射Interpolation 内插法 Intrinsic 本征的
Intrinsic semiconductor 本征半导体 Inverse operation 反向工作
Inversion 反型 Inverter 倒相器
Ion 离子 Ion beam 离子束
Ion etching 离子刻蚀 Ion implantation 离子注入
Ionization 电离 Ionization energy 电离能
Irradiation 辐照 Isolation land 隔离岛
Isotropic 各向同性
Junction FET(JFET) 结型场效应管 Junction isolation 结隔离
Junction spacing 结间距 Junction side-wall 结侧壁
Latch up 闭锁 Lateral 横向的
Lattice 晶格 Layout 版图
Lattice binding/cell/constant/defect/distortion 晶格结合力/晶胞/晶格/晶格常熟/晶格缺陷/晶格畸变
Leakage current (泄)漏电流 Level shifting 电平移动
Life time 寿命 linearity 线性度
Linked bond 共价键 Liquid Nitrogen 液氮
Liquid-phase epitaxial growth technique 液相外延生长技术Lithography 光刻 Light Emitting Diode(LED) 发光二极管
Load line or Variable 负载线 Locating and Wiring 布局布线Longitudinal 纵向的 Logic swing 逻辑摆幅
Lorentz 洛沦兹 Lumped model 集总模型
Majority carrier 多数载流子 Mask 掩膜板,光刻板
Mask level 掩模序号 Mask set 掩模组
Mass - action law质量守恒定律 Master-slave D flip-flop主从D触发器Matching 匹配 Maxwell 麦克斯韦
Mean free path 平均自由程 Meandered emitter junction梳状发射极结Mean time before failure (MTBF) 平均工作时间
Megeto - resistance 磁阻 Mesa 台面
MESFET-Metal Semiconductor金属半导体FET
Metallization 金属化 Microelectronic technique 微电子技术Microelectronics 微电子学 Millen indices 密勒指数
Minority carrier 少数载流子 Misfit 失配
Mismatching 失配 Mobile ions 可动离子
Mobility 迁移率 Module 模块
Modulate 调制 Molecular crystal分子晶体
Monolithic IC 单片IC MOSFET金属氧化物半导体场效应晶体管
Mos. Transistor(MOST )MOS. 晶体管 Multiplication 倍增
Modulator 调制 Multi-chip IC 多芯片IC
Multi-chip module(MCM) 多芯片模块 Multiplication coefficient倍增因子
Naked chip 未封装的芯片(裸片) Negative feedback 负反馈Negative resistance 负阻 Nesting 套刻
Negative-temperature-coefficient 负温度系数 Noise margin 噪声容限Nonequilibrium 非平衡 Nonrolatile 非挥发(易失)性
Normally off/on 常闭/开 Numerical analysis 数值分析
Occupied band 满带 Officienay 功率
Offset 偏移、失调 On standby 待命状态
Ohmic contact 欧姆接触 Open circuit 开路
Operating point 工作点 Operating bias 工作偏置
Operational amplifier (OPAMP)运算放大器
Optical photon =photon 光子 Optical quenching光猝灭
Optical transition 光跃迁 Optical-coupled isolator光耦合隔离器Organic semiconductor有机半导体 Orientation 晶向、定向
Outline 外形 Out-of-contact mask非接触式掩模
Output characteristic 输出特性 Output voltage swing 输出电压摆幅Overcompensation 过补偿 Over-current protection 过流保护
Over shoot 过冲 Over-voltage protection 过压保护
Overlap 交迭 Overload 过载
Oscillator 振荡器 Oxide 氧化物
Oxidation 氧化 Oxide passivation 氧化层钝化
Package 封装 Pad 压焊点
Parameter 参数 Parasitic effect 寄生效应
Parasitic oscillation 寄生振荡 Passination 钝化
Passive component 无源元件 Passive device 无源器件
Passive surface 钝化界面 Parasitic transistor 寄生晶体管
Peak-point voltage 峰点电压 Peak voltage 峰值电压
Permanent-storage circuit 永久存储电路 Period 周期
Periodic table 周期表 Permeable - base 可渗透基区
Phase-lock loop 锁相环 Phase drift 相移
Phonon spectra 声子谱
Photo conduction 光电导 Photo diode 光电二极管
Photoelectric cell 光电池
Photoelectric effect 光电效应
Photoenic devices 光子器件 Photolithographic process 光刻工艺(photo) resist (光敏)抗腐蚀剂 Pin 管脚
Pinch off 夹断 Pinning of Fermi level 费米能级的钉扎(效应)Planar process 平面工艺 Planar transistor 平面晶体管
Plasma 等离子体 Plezoelectric effect 压电效应
Poisson equation 泊松方程 Point contact 点接触
Polarity 极性 Polycrystal 多晶
Polymer semiconductor聚合物半导体 Poly-silicon 多晶硅
Potential (电)势 Potential barrier 势垒
Potential well 势阱 Power dissipation 功耗
Power transistor 功率晶体管 Preamplifier 前置放大器
Primary flat 主平面 Principal axes 主轴
Print-circuit board(PCB) 印制电路板 Probability 几率
Probe 探针 Process 工艺
Propagation delay 传输延时 Pseudopotential method 膺势发
Punch through 穿通 Pulse triggering/modulating 脉冲触发/调制Pulse Widen Modulator(PWM) 脉冲宽度调制
Punchthrough 穿通 Push-pull stage 推挽级
Quality factor 品质因子 Quantization 量子化
Quantum 量子 Quantum efficiency量子效应
Quantum mechanics 量子力学 Quasi – Fermi-level准费米能级Quartz 石英
Radiation conductivity 辐射电导率 Radiation damage 辐射损伤Radiation flux density 辐射通量密度 Radiation hardening 辐射加固Radiation protection 辐射保护 Radiative - recombination辐照复合Radioactive 放射性 Reach through 穿通
Reactive sputtering source 反应溅射源 Read diode 里德二极管Recombination 复合 Recovery diode 恢复二极管
Reciprocal lattice 倒核子 Recovery time 恢复时间
Rectifier 整流器(管) Rectifying contact 整流接触
Reference 基准点基准参考点 Refractive index 折射率
Register 寄存器 Registration 对准
Regulate 控制调整 Relaxation lifetime 驰豫时间
Reliability 可靠性 Resonance 谐振
Resistance 电阻 Resistor 电阻器
Resistivity 电阻率 Regulator 稳压管(器)
Relaxation 驰豫 Resonant frequency共射频率
Response time 响应时间 Reverse 反向的
Reverse bias 反向偏置
Sampling circuit 取样电路 Sapphire 蓝宝石(Al2O3)
Satellite valley 卫星谷 Saturated current range电流饱和区
Saturation region 饱和区 Saturation 饱和的
财务专业术语中英文对照表 英文中文说明 Account Accounting system 会计系统 American Accounting Association 美国会计协会 American Institute of CPAs 美国注册会计师协会 Audit 审计 Balance sheet 资产负债表 Bookkeepking 簿记 Cash flow prospects 现金流量预测 Certificate in Internal Auditing 部审计证书 Certificate in Management Accounting 管理会计证书 Certificate Public Accountant注册会计师 Cost accounting 成本会计 External users 外部使用者 Financial accounting 财务会计 Financial Accounting Standards Board 财务会计准则委员会 Financial forecast 财务预测 Generally accepted accounting principles 公认会计原则 General-purpose information 通用目的信息 Government Accounting Office 政府会计办公室 Income statement 损益表 Institute of Internal Auditors 部审计师协会 Institute of Management Accountants 管理会计师协会 Integrity 整合性 Internal auditing 部审计 Internal control structure 部控制结构 Internal Revenue Service 国收入署 Internal users部使用者 Management accounting 管理会计 Return of investment 投资回报 Return on investment 投资报酬 Securities and Exchange Commission 证券交易委员会
品质名词(中英对照)A ABC analysis ABC 分析 Abnormality 不正常性 Abscissa 横坐标 Absolute deviation 绝对离差 Absolute dispersion 绝对离势 Absolute error 绝对误差 Absolute frequency 绝对次数 Absolute number 绝对数 Absolute reliability 绝对可靠度 Absolute term 绝对项 Absolute value 绝对值 Absolute variation 绝对变异 Abstract number 抽象数 Abstract unit 抽象单位 Accelerated factor 加速系数,加速因子Accelerated life test 加速寿命试验
Accelerated test 加速试验 Acceleration 加速度 Acceptable limit 允收界限 Acceptable process 允收制程水平Acceptable quality 允收品质 Acceptable quality level (AQL) 允收质量水平Acceptable reliability level (ARL) 允收可靠度水平Acceptability 允收性 Acceptability criterion 允收标准 Acceptance 允收,验收 Acceptance, probability of 允收机率Acceptance, region of 允收区域 Acceptance and rejection criteria 允收与拒收准则Acceptance boundary 允收界限 Acceptance coefficient 允收系数 Acceptance control chart 验收管制图Acceptance cost 验收费用 Acceptance criteria 允收准则Acceptance error 允收误差
Chemntherapeutic agents 化学疗法 thus xue fiao fa) Chemothcrjipy 化学疔,Z (hija xue Aaa fa) hns the goal of killing or stopping rhe development nf rapidly dividing cells. Examples are Cisplatin, Carboplat in, Bkomycin I 博来霉嗪1 (ftd l3f Sg S-fltinrncjrao 5 氟尿瞪喘(ft/ HiAO m dfinfl), mrthotrExate 甲員媒时{Jia 的 did /ioffk Vincristine fifr chun xJTj/a^, Vinblastine 衣祚碱 (chang chun ;ian}. Taxol and Tawiuvirtn .木戟题(SSfi ben 阳ng 钠* Since the sanK nicchanism (hat kilh malignant cdl or blocks de vela pment of a malignant cell cm have similar effects on a nnrnuil, rap idly dividing celt any of LhcNt agents ciin hax r c btid side clfccts. Some terms of cancer ircitLcd with chemcthera 卩、may cjus,e ihe cancer (o "disappear
常用中英文对照 MSA:测量系统分析(MEASUREMENT SYSTEM ANALYSIS) AQL:允收水准(ACCEPTABLE QUALITY LEVER) ISO:国际标准化组织(INTERNATIONAL ORGANIZATION FOR STANGDARDIZA TION)FMEA:失效模式和影响分析(FAILURE MODE AND EFFECT ANALYSIS) FPY:首次合格率(FIRST PASS YIELD) JIT:及时率(JUST IN TIME) QC:品质控制 QA:品质保证 QE:品质工程 IQC:来料品质控制(INCOMING QUALITY CONTROL) IPQC:制程品质控制(INPROCESS ----------------------------) FQC:最终品质控制(FINAL -------------------------------------) LQC:生产线品质控制(LINE --------------------------------------) SQA:供应商品质保证(SUPPLIER QUALITY CONTROL) DCC:文控中心(DOCUMENT CONTROL CENTER) PQA:制程品质保证(PROCESS QUALITY ASSYRANCE) FQA:最终-------------(FINAL ---------------------------------------) DAS:缺陷分析系统(DEFECTS ANALYSIS SYSTEM) FA:坏品分析(FAILURE ANALYSIS) CPI:连续工序改善(CONTINUOUS PROCESS IMPROVEMENT) CS:客户服务(CUSTEMER SERVICE) TRAINING:培训 COQ:品质成本 COIF:内部缺陷成本 PPM:百万分之-----(PART PER MILLION) MSDS:材料安全资料卡(MATERIAL SAFETY DATA SHEET) MRB:物料/材料审查委员会(MATERIALS REVIEW BOARD) MQC:制造质量控制(MANUFACTURING QUALITY CONTORL) QAP:质量保证计划(QUALITY ASSURANCE PLANNING) BOM:料件结构表(BILLS OF MATERIAL) QM:品质手册(QUALITY MANUAL) QP:品质程序(QUALITY PROCEDURE/PEOGRAM) WI:作业指导书(SOP/SIP------WORK INSTRUCTION) FR:表单/表格(FORM) SOP:标准操作程序(STANDARD OPERATING PROCEDURE) SIP:标准检验程序(STANDARD INSPECTION PROCEDURE) FIFO:先进先出(FIRST IN FIRST OUT) CO:公司(COMPANY) LID:有限的(LIMITED) CC:复写的副本;抄送(CARBON COPY)
三维动画术语中英文对照 A Absolute Mode Transform Type-in对坐标方式变换输入Absolute/Relative Snap Toggle Mode绝对/相对捕捉开关模式Accelerated Montage加速蒙太奇 Activate All Maps激活所有贴图 Activate Grid Object激活网格对象;激活网格物体Activate Grid激活栅格;激活网格 Activate Home Grid激活主栅格;激活主网格 Activate活动;激活 Active Shade Floater自动着色面板;交互渲染浮动窗口Active Shade Viewport自动着色视图 Active Shade(Scanline)着色(扫描线) Active Shade实时渲染视图;着色;自动着色 Actual Sound真实声音 Adaptive Cubic立方适配 Adaptive Degradation Toggle降级显示开关 Adaptive Degradation自动降级 Adaptive Linear线性适配 Adaptive Path Steps适配路径步幅;路径步幅自动适配Adaptive Path自适应路径 Adaptive Perspective Grid Toggle适配透视网格开关
Adaptive适配;自动适配;自适应 Add as Proxy加为替身 Add Cross Section增加交叉选择 Additive Color加色法 Adopt the File's Unit Scale采用文件单位尺度 Adv. Lighting高级照明 Advanced Surface Approximation高级表面近似;高级表面精度控制Advanced Surface Approx高级表面近似;高级表面精度控制Affect Diffuse Toggle影响漫反射开关 Affect Neighbors影响相邻 Affect Region影响区域 Affect Specular Toggle影响镜面反射开关 AI Export输出Adobe Illustrator(*.AI)文件 AI Import输入Adobe Illustrator(*.AI)文件 Align Camera对齐摄像机 Align Grid to View对齐网格到视图 Align Normals对齐法线 Align Orientation对齐方向 Align Position对齐位臵(相对当前坐标系) Align Selection对齐选择 Align to Cursor对齐到指针 Align对齐 All Class ID全部类别 All Commands所有命令
语文课程与教学论 名词术语中英文对照表 the Chinese Course and Teaching and Learning Theory in Chinese and English Teaching materials editing teaching materials /Chinese Teaching Materials /edit teaching materials /Uniformed Chinese Teaching Materials /Experimental Teaching Materials /Mother Tongue Teaching Materials /Teaching Materials of the New Course *textbook *reading book *teaching reference book *exercises book *studying plan Technology /Educational Technology /Modern Educational Technology /Educational Technology in Chinese Teaching /multi-media technology /net technology /cloud serving technology *white board *net meeting *chat room *blog Teaching Basic Theory of the Teaching teaching aim teaching task teaching objective teaching model teaching tactics teaching principle teaching program teaching reform teaching case Courseware teaching resources teaching experiment /mother tongue teaching A Term List of 1. 教材( JC ) 教材编写 /语文教材 /编写教材 / 统编教材 /实验教材 /母语教材 /新课程教材 * 课本 * 读本 * 教学参考书(教参) * 练习册 *学案 2. 技术( JS ) / 教育技术 /现代 教育技术 /语文 教育技术 /多媒 体技术 / 网络 技术 /云服务技 术 * 白板 *网 络会议 *聊天室 * 博克 3. 教学 (JX ) 教学基本理论 教学目的 教学 任务 教学目标 教学模式 教学 策略 教学原则 教学大纲 教学 改革 教学案例 教学课件 教学 资源 教学实验 /母语教学
1. 热力学thermodynamics 2. 热源heat source 3. 热力学平衡状态thermodynamic equilibrium state 4. 稳态steady state 5. 非稳态unsteady state 6. 可逆过程reversible process 7. 不可逆过程irreversible process 8. 热力学第一定律first law of thermodynamics 9. 热力学第二定律second law of thermodynamics 10. 热力学第三定律third law of thermodynamics 11. 内能internal energy 12. 焓enthalpy 13. 熵entropy 14. 热量heat 15. 理想气体ideal gas 16. 相变change of phase 17. 汽化vaporization 18. 蒸发evaporation 19. 沸腾boiling 20. 沸点boiling point 21. 凝结condensation 22. 饱和状态saturation state
23. 饱和温度saturation temperature 24. 饱和压力saturation pressure 25. 饱和液体saturation liquid 26. 饱和蒸汽saturation vapor 27. 过饱和supersaturation 28. 湿蒸汽wet vapor 29. 过热superheat 30. 过热蒸汽superheated vapor 31. 过热度degree of superheat 32. 过冷subcooling 33. 过冷液体subcooled liquid 34. 气-液混合物liquid-vapor mixture 35. 干度quality 36. 冷凝点condensation point 37. 冷凝液condensate 38. 共沸混合物azeotropic mixture 39. 共沸性azeotropy 40. 共沸点azeotropic point 41. 凝固solidification 42. 熔化fusion 43. 熔点melting point 44. 升华sublimation
各种专业名称英语词汇中英文对照表
————————————————————————————————作者: ————————————————————————————————日期: ?
各种专业名称英语词汇中英文对照表 哲学Philosophy 马克思主义哲学Philosophy of Marxism 中国哲学ChinesePhilosophy 外国哲学ForeignPhilosophies ?逻辑学Logic?伦理学Ethics 美学Aesthetics 宗教学Science of Religion?科学技术哲学Philosophy of Science andTechnology?经济学Economics?理论经济学Theoretical Economics ?政治经济学PoliticalEconomy ?经济思想史History ofEconomic Thought ?经济史History of Economic 西方经济学WesternEconomics?世界经济World Economics ?人口、资源与环境经济学Population,Resources andEnvironmentalEconomics 应用经济学Applied Economics 国民经济学National Economics?区域经济学Regional Economics ?财政学(含税收学)Public Finance (includingTaxation) 金融学(含保险学) Finance (including Insurance)?产业经济学Industrial Economics ?国际贸易学International Trade 劳动经济学Labor Economics ?统计学Statistics ?数量经济学Quantita tive Economics ?中文学科、专业名称英文学科、专业名称 国防经济学National Defense Economics?法学Law 法学Science of Law ?法学理论Jurisprudence?法律史Legal History ?宪法学与行政法学Constitutional Law and Administrative Law 刑法学Criminal Jurisprudence 民商法学(含劳动法学、社会保障法学)Civil Law and Commercial Law (i ncluding Science of LabourLawand Science ofSocial Sec urityLaw)?诉讼法学Science of ProcedureLaws ?经济法学Sc ience ofEconomic Law ?环境与资源保护法学Science ofEnvironment andNatural Resources Protection Law 国际法学(含国际公法学、国际私法学、国际经济法学、)Internationallaw (including International Public law, International PrivateLaw a
电影专业术语中英文对照 森森 来自: 森森2011-12-06 14:20:07 documentary (film) 记录片,文献片 filmdom 电影界 literary film 文艺片 musicals 音乐片 comedy 喜剧片 tragedy 悲剧片 dracula movie 恐怖片 sowordsmen film 武侠片 detective film 侦探片 ethical film 伦理片 affectional film 爱情片 erotic film 黄色片 western movies 西部片 film d’avant-garde 前卫片 serial 系列片 trailer 预告片 cartoon (film) 卡通片,动画片 footage 影片长度 full-length film, feature film 长片 short(film) 短片 colour film 彩色片(美作:color film)
silent film 默片,无声片 dubbed film 配音复制的影片,译制片 silent cinema, silent films 无声电影 sound motion picture, talkie 有声电影 cinemascope, CinemaScope 西涅玛斯科普型立体声宽银幕电影,变形镜头式宽银幕电影cinerama, Cinerama 西涅拉玛型立体声宽银幕电影,全景电影 title 片名 original version 原著 dialogue 对白 subtitles, subtitling 字幕 credits, credit titles 对原作者及其他有贡献者的谢启和姓名 telefilm 电视片 演员actors cast 阵容 film star, movie star 电影明星 star, lead 主角 double, stand-in 替身演员 stunt man 特技替身演员 extra, walker-on 临时演员 character actor 性格演员 regular player 基本演员 extra 特别客串
Gredit Account货方科目 Exch Rate兑换率ASAP As soon As possible尽快 FTP File Transfer Protocol文件传递(输)协议CD-ROM compact disc read -only memory只读光盘存储器UV Ultraviolet紫外线 EC Engineering change工程变更 EV Equipment Variance量具变异 AV Appraiser variance作业者变异PV Part variation局部变异 Characteristic Diagram特性要因图 Stratification层别法 Check list查检表 Histogram直方图 Scatter Diagram散布图 Pare to Diagram柏拉图 Control Chart管制图 CEO Chief Executive Officer执行总裁 VIP Very Important Person贵宾 ERP Enterprice Resource Planning企业资源规划MRP I Material Requirement Planning物料需求规划MRP II Maufacturing Resource Planning制造资源规划OA Operation Analysis作业者变异 Gap Analysis差异分析PC Product Control生产分析 MC Material control物料管控 MTS make to--Stock存货式生产ATO assemble-to-order接单式装配ATM Applicotion Implementation应用系统导入方法 Unorder Receipt无订单的收料 Shop floor车间、职场 Shop floor control厂地控制、车间管理Shop floor production control工厂生产管理 Write书写 Observed观察 Read阅读 Listen听 UCL Upper Control Limit管制上限 LCL Lower Control Limit管制下限 Critical defect严重缺点 Minor defect次要缺点 Packing List出货明细 PCB Printed Circuit Board印刷电路板 PCBA Printed Circuit Board Assemblies 印刷电路板总成常用品质术语中英文对照表
动画术语--中英文对照 ACTION.......................................................................... ...............动作 ANIMATOR.............................................................原画者,动画设计 ASSISTANT.................................................................... ...........动画者 ANTIC............................................................................. .......预备动作 AIR BRUSHING............................................................................喷效 ANGLE........................................................................... ................角度 ANIMATED ZOOM...................................................画面扩大或缩小 ANIMATION FILM...................................................................动画片 ANIMATION COMPUTER...................................电脑控制动画摄影 ATMOSPHERE SKETCH .....................................................气氛草图 B.P.(BOT PEGS) ...................................................................下定位 BG(BACKGROUND) ................................................... ................背景 BLURS............................................................................ ...............模糊 BLK(BLINK) ................................................................. ...............眨眼 BRK DN(B.D.)(BREAK-DOWN) ...........................................中割 BG LAYOUT......................................................................背景设计稿 BACKGROUND KEYS ........................................................背景样本 BACKGROUND HOOKUP...................................................衔接背景 BACKGROUND PAN...............................................................长背景 6
工程专业术语中英文对照
CDB工程专业术语中英文对照(二) 添加时间:2013-4-24 节流截止放空阀 2011-08-10 16:50:46| 分类:English | 标签:|字号大中小订阅 六、仪表及自动控制 通用描述 COMMON DESCRIPTION 设备名称Equipment Name 缩写 ABB. 分散控制系统Distributed Control System DCS 安全仪表系统Safety Instrumentation System SIS 紧急切断系统Emergency Shutdown system ESD 火气系统Fire and Gas system F&G 监视控制和数据采集系统 Supervisory Control and Data Acquisition SCADA 可编程逻辑控制器Programmed Logic Controller PLC 远程终端单元Remote Terminal Unit RTU 站控系统Station Control System SCS 中央控制室Central Control Room CCR 操作间Operation room 机柜间Equipment room/ Cabinet room 大屏显示系统Large Screen Display system LSD 流量类仪表 FLOW INSTRUMENT 设备名称Equipment Name 孔板Orifice Plate 文丘里流量计Venturi Flowmeter 均速管流量计Averaging Pitot Tube 阀式孔板节流装置 Orifice Plate in quick change fitting 涡轮流量计Turbine Flowmeter
术语表 Acceptance Criteria–接受标准:接受测试结果的数字限度、范围或其他合适的量度标准。Active Pharmaceutical Ingredient(API)(or Drug Substance)-活性要用成分(原料药)旨在用于药品制造中的任何一种物质或物质的混合物,而且在用于制药时,成为药品的一种活性成分。此种物质在疾病的诊断,治疗,症状缓解,处理或疾病的预防中有药理活性或其他直接作用,或者能影响机体的功能和结构。 API Starting Material–原料药的起始物料:用在原料药生产中的,以主要结构单元被并入该原料药的原料、中间体或原料药。原料药的起始物料可能是在市场上有售,能够根据合同或商业协议从一个或多个供应商处购得,或者自己生产。原料药的起始物料通常有特定的化学特性和结构。 Batch(or Lot)-批:有一个或一系列工艺过程生产的一定数量的物料,因此在规定的限度内是均一的。在连续生产中,一批可能对应与生产的某以特定部分。其批量可规定为一个固定数量,或在固定时间间隔内生产的数量。 Batch Number(or Lot Number)-批号用于标识一批的一个数字、字母和/或符号的唯一组合,从中可确定生产和销售的历史。 Bioburden–生物负载:可能存在与原料、原料药的起始物料、中间体或原料药中的微生物的水平和种类(例如,治病的或不治病的)。生物负载不应当当作污染,除非含量超标,或者测得治病生物。 Calibration–校验:证明某个仪器或装置在一适当的量程范围内测得的结果与一参照物,或可追溯的标准相比在规定限度内。 Computer System–计算机系统:设计安装用于执行某一项或一组功能的一组硬件元件和关联的软件。 Computerized System–计算机化系统与计算机系统整合的一个工艺或操作。Contamination–污染:在生产、取样、包装或重新包装、贮存或运输过程中,具化学或微生物性质的杂质或外来物质进入或沾染原料、中间体或原料药。 Contract Manufacturer–协议制造商:代表原制造商进行部分制造的制造商。 Critical–决定性的:用来描述为了确保原料药符合规格标准,必须控制在预定范围内的工艺步骤、工艺条件、测试要求或其他有关参数或项目。 Cross-Contamination–交叉污染:一种物料或产品对另一种物料或产品的污染。 Deviation–偏差:对批准的指令或规定的标准的偏离。 Drug(Medicinal)Product–药品:经最后包装准备销售的制剂(参见Q1A) Drug Substance–药物见原料药 Expiry Date(or Expiration Date)-有效期:原料药容器/标签上注明的日期,在此规定时间内,该原料药在规定条件下贮存时,仍符合规格标准,超过这以期限则不应当使用。 Impurity–杂质:存在与中间体或原料药中,任何不希望得到的成分。 Impurity Profile–杂质概况:对存在于一种原料药中的已知和未知杂质的描述。 In-Process Control(or Process Control)-中间控制:生产过程中为监测,在必要时调节工艺和/或保证中间体或原料药符合其规格而进行的检查。 Intermediate–中间体:原料药工艺步骤中生产的、必须经过进一步分子变化或精制才能成为原料药的一种物料。中间体可以分离或不分离。 Manufacture–制造:物料的接收、原料药的生产、包装、重新包装、贴签、重新贴签、质量控制、放行、贮存和分发以及相关控制的所有操作。 Material–物料:原料(起始物料,试剂,溶剂),工艺辅助用品,中间体,原料药和包装及贴签材料的统称。
. . 品质管理名词(中英文对照) QE=品质工程师(Quality Engineer ) MSA: Measurement System Analysis 量测系统分析 LCL: Lower Control limit 管制下限 Control plan 管制计划 Correction 纠正 Cost down 降低成本 CS: customer Sevice 客户中心 Data 数据 Data Collection 数据收集 Description 描述 Device 装置 Digital 数字 Do 执行 DOE: Design of Experiments 实验设计 Environmental 环境 Equipment 设备 FMEA: Failure Mode and Effect analysis 失效模式与效果分析 FA: Failure Analysis 坏品分析 FQA: Final Quality Assurance 最终品质保证 FQC: Final Quality control 最终品质控制 Gauge system 量测系统 Grade 等级 Inductance 电感 Improvement 改善 Inspection 检验 IPQC: In Process Quality Control 制程品质控制 IQC: Incoming Quality Control 来料品质控制 ISO: International Organization for Standardization 国际标准组织 LQC: Line Quality Control 生产线品质控制 LSL: Lower Size Limit 规格下限 Materials 物料 Measurement 量测 Occurrence 发生率 Operation Instruction 作业指导书 Organization 组织 Parameter 参数 Parts 零件 Pulse 脉冲 Policy 方针 Procedure 流程 Process 过程 Product 产品 Production 生产 Program 方案 Projects 项目 QA: Quality Assurance 品质保证 QC: Quality Control 品质控制 QE: Quality Engineering 品质工程 QFD: Quality Function Design 品质机能展开 Quality 质量 Quality manual 品质手册 Quality policy 品质政策 Range 全距 Record 记录 Reflow 回流 Reject 拒收 Repair 返修 Repeatability 再现性 Reproducibility 再生性 Requirement 要求 Residual 误差 Response 响应 Responsibilities 职责 Review 评审 Rework 返工 Rolled yield 直通率 sample 抽样,样本 Scrap 报废 SOP: Standard Operation Procedure 标准作业书 SPC: Statistical Process Control 统计制程管制 Specification 规格 SQA: Source(Supplier) Quality Assurance 供应商品质保证 Taguchi-method 田口方法 TQC: Total Quality Control 全面品质控制 TQM: Total Quality Management 全面品质管理 Traceability 追溯 UCL: Upper Control Limit 管制上限 USL: Upper Size Limit 规格上限 Validation 确认 Variable 计量值 Verification 验证 Version 版本 QCC Quality Control Circle 品质圈/QC 小组 PDCA Plan Do Check Action 计划 执行 检查 总结
建筑术语中英文对照 建筑 build; architecture; construct; architectural; architectural & industrial ceramics 建筑安装工程量 construction work quantity 建筑板材 building board 建筑材料表 list of building materials 建筑材料检验 building material testing 建筑材料行 building material dealer 建筑材料运输列车 construction train 建筑草图 architectural sketch 建筑朝向 building orientation 建筑成本预算 construction cost estimate 建筑承包商 building contractor 建筑尺度 architectural scale 建筑处理 architectural treatment 建筑创作 architectural creation 建筑大五金 architectural metalwork 建筑大样 architectural detail 建筑单元 building unit 建筑费 construction cost 建筑风格 architectural style 建筑辅助系统 building subsystem 建筑钢 construction(al) steel 建筑钢板 building sheet 建筑高度 building height; height of building 建筑高度分区 building height zoning; height zoning 建筑工程升降机 builder's lift 建筑工地选择 siting
高分子专业术语中英文对照表
加工processing 反应性加工reactive processing 等离子体加工plasma processing 加工性processability 熔体流动指数melt [flow] index 门尼粘度Mooney index 塑化plasticizing 增塑作用plasticization 内增塑作用internal plasticization 外增塑作用external plasticization 增塑溶胶plastisol 增强reinforcing 增容作用compatibilization 相容性compatibility 相溶性intermiscibility 生物相容性biocompatibility 血液相容性blood compatibility 组织相容性tissue compatibility 混炼milling, mixing 素炼mastication 塑炼plastication 过炼dead milled 橡胶配合rubber compounding 共混blend 捏和kneading 冷轧cold rolling 压延性calenderability 压延calendering 埋置embedding 压片preforming 模塑molding 模压成型compression molding 压缩成型compression forming 冲压模塑impact moulding, shock moulding 叠模压塑stack moulding 复合成型composite molding 注射成型injection molding 注塑压缩成型injection compression molding 射流注塑jet molding 无流道冷料注塑runnerless injection molding 共注塑coinjection molding 气辅注塑gas aided injection molding 注塑焊接injection welding 传递成型transfer molding
CDB工程专业术语中英文对照(二) 添加时间:2013-4-24 节流截止放空阀 2011-08-10 16:50:46| 分类:English | 标签:|字号大中小订阅 六、仪表及自动控制 通用描述 COMMON DESCRIPTION 设备名称Equipment Name 缩写 ABB. 分散控制系统Distributed Control System DCS 安全仪表系统Safety Instrumentation System SIS 紧急切断系统Emergency Shutdown system ESD 火气系统Fire and Gas system F&G 监视控制和数据采集系统 Supervisory Control and Data Acquisition SCADA 可编程逻辑控制器Programmed Logic Controller PLC 远程终端单元Remote Terminal Unit RTU 站控系统Station Control System SCS 中央控制室Central Control Room CCR 操作间Operation room 机柜间Equipment room/ Cabinet room 大屏显示系统Large Screen Display system LSD 流量类仪表 FLOW INSTRUMENT 设备名称Equipment Name 孔板Orifice Plate 文丘里流量计Venturi Flowmeter 均速管流量计Averaging Pitot Tube 阀式孔板节流装置 Orifice Plate in quick change fitting 涡轮流量计Turbine Flowmeter