文档库

最新最全的文档下载
当前位置:文档库 > AVRF476M06B12T-F中文资料

AVRF476M06B12T-F中文资料

Type AVRF –55 °C to 105 °C

SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C

AVRF476M06B12T-F中文资料

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • http://www.wendangku.net/doc/26673844f7ec4afe04a1dfa9.html

Specifications

–55 °C to +105 °C

6.3, 10, 16, 25, 35 Vdc 4.7 µF to 1500 µF

±20% @ 120 Hz and +20 °C

0.01 CV or 3 µA @ +20 °C, after two minutes (whichever is greater)Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling

Highlights

• +105 °C, Up to 5000 Hour Load Life • Ultra-low Impedance

• Voltage Range: 6.3 Vdc to 35 Vdc

Operating Temperature: Rated Voltage:Capacitance:Capacitance Tolerance:Leakage Current:Low Temperature

Characteristics @ 120 Hz:

Dissipation Factor:

Life Test: 2000 h @ 105 °C, 4.0 — 6.3 mm dia. 5000 h @ 105 °C, 8.0 — 10.0 mm dia.

∆ Capacitance ±30% (10 mm Dia.: ±35%

DF: ≤ 200% of limit (10 mm Dia.: ≤300%)

DCL: ≤ 100% of limit

Shelf Test: 1000 h @ 105 °C ∆ Capacitance ±30% (10 mm Dia.: ±35%)

DF: ≤ 200% of limit (10 mm Dia.: ≤300%)

DCL: ≤ 100% of limit

Type AVRF Capacitors are the best and by a wide margin. With 40% to 60% lower impedance, 30% to 50% smaller case size and more than twice the life compared to low-ESR type AFC, the Type AVRF also excels at cold performance down to –55 °C. In addition, this terrific low- impedance performance, approaching low-ESR tantalum capacitors, is at a significant cost savings compared to tantalum. The vertical cylindrical cases facilitate automatic mounting and reflow soldering into the same footprint of like-rated tantalum capacitors except without the need for voltage derating.

6.3V 10 V 16 V 25 V 35 V 0.26

0.19

0.16

0.14

0.12

Rated Voltage (Vdc) 6.310162535Impedance

Ratio

Z(-25ºC)/Z(+20ºC)

22222Z(-40ºC)/Z(+20ºC)

33333Z(-55ºC)/Z(+20ºC)

4

4

4

3

3

AVRF 106M 16B 12T –F

Capacitance Capacitance Voltage Code Case Packaging Code RoHS

AVRF

475 = 4.7 µF Tolerance 06 = 6.3 Vdc 25 = 25 Vdc

Code 12 = Carrier tape Compliant

106 = 10.0 µF M = ±20%

10 = 10 Vdc 35 = 35 Vdc

Width (mm)107 = 100.0 µF 16 = 16 Vdc

T = Tape & Reel 108 = 1000.0 µF

Part Numbering System

Complies with the EU Directive 2002/95/EC re-quirement restricting the use of Lead (Pb), Mer-cury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE).

元器件交易网http://www.wendangku.net/doc/26673844f7ec4afe04a1dfa9.html