文档库

最新最全的文档下载
当前位置:文档库 > UA5000脚本

UA5000脚本


sysname XXXXXXXX
加框加板及配置端口模式
frame add 0 0

frame add 1 9

frame connect 0 1//连接主从框

增加单板:
board batadd 0/6 0/16 a32
board add 0/17 tss
board batadd 0/18 0/35 a32
board confirm 0 确认单板

1.配置端口模式

up-linkport set workmode eth1
fe mode active eth1 100mfull

fe mode standby eth1 100mfull

修改IP地址:
interface eth

ip modify 172.20.1.2 ip_address 10.49.26.252 submask 255.255.255.248 gateway 10.49.26.249 vlan_tag 1690


2.配置相关参数
alarm alarmlevel 0x1c100007 major

qos threshold jitter 20 loopdelay 100 packetlost 1

modem parameters eventmode 0

fax parameters tranmode 2

time time-stamp local

uplink tps on


3.H248接口数据以及配置MG用户
interface h248 0
y

if-h248 attribute code text domainName dazha-AG01 mgip 10.49.26.252 mgport 2944 transfer alf/udp mgcip_1 10.49.0.71 mgcport_1 2944 mg-media-ip 10.49.26.252


digitmap-timer start 20
digitmap-timer short 3
digitmap-timer long 3
digitmap-timer duration 4000
digitmap set inner [2-8]xxxxxx

mg-ringmode add 0 0 4

if-h248 attribute heartBeatgenTimer 5 heartBeatRetransTimes 5 heartBeatRetransTimer 3


reset coldstart
y

quit

esl user
mgpstnuser batadd 0/6/0 0/16/31 0 terminalid 0

mgpstnuser batadd 0/18/0 0/35/31 0 terminalid 352

pstnport reversepole_pulse batset 0/%d/0 0/%d/31 300 enable

pstnport attribute batset 0/%d/0 0/%d/31 polarity-reverse support

pstnport attribute batset 0/7/0 0/7/31 polarity-reverse support

4.环境监控(h303esc)
emu add 0 h303esc 0 30 RS232 dazha

esc digital 2 available-level high-level name fan digital-alarm 13 风扇告警JDT1

esc digital 3 available-level low-level name fan digital-alarm 13 风扇告警JDT2 #

esc digital 9 available-level low-level name water digital-alarm 16 水浸告警JDT8 #

esc digital 8 available-level high-level name flog digital-alarm 15 烟雾告警JDT7

5.环境监控设置(电源监控4845)
emu add 0 poWER4845 0 0 rs232

interface emu 0

power battery parameter 0.15 60 1 100 (配置蓄电池参数)

power battery temperature 60 -40 100 (配置蓄电池参数)

power environment temperature 62 0 80 -20 (设置温度参数)

power environment humidity 80 10 100 0 (设置湿度参数)

power outside_digital 0 low-level Masterframe_fan (配置扩展数字监控量)

power outside_digital 3 low-level SPD

power outside_digital 4 high-level Smoke

power outside_digital 5 high-level Heat_Exchanger


如果采用220V的电源系统,该步骤无需配置;如果采用110V系统,需要进行如下配置.
power supply-parameter 180 90 58 45


6.网管设置

snmp-agent local-engineid 800007DB03001882BE2F7D
y

snmp-agent community read public

snmp-agent community write private

snmp-agent sys-info contact Telecom-07578222

UA5000脚本

(共3页)