SEMICONDUCTOR Spec. No.CORPORATION
Rev.
PRODUCT SPECIFICATION
Descriptions:
■LED Type : Lighting LED Lamp ■LED Package : Round LED Lamp ■Emitting Color :Red ■Viewing Angle :15°■No Stopper
CHINA SEMICONDUCTOR CORPORATION OPTO PLUS TECHNOLOGIES CO.,LTD
Address:2FL. NO.909,Chung-Cheng Road, Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing, Chung-Ho City Taipei Hsien,Taiwan. ZheJiang,China Tel:886-2-2223-9696Tel:86-0575-********Fax:886-2-2223-9377
Fax:86-0575-********
CUSTOMER APPROVED SIGNATURES
APPROVED BY CHECKED BY PREPARED BY
PS-LL-U502HR4-A0
A
Model No :CSLR-U502HR4-A0
元器件交易网https://www.wendangku.net/doc/2c9284293.html,
■ Features - 1. Low Power Consumption. 3. High Reliability and Solid Performance 4. Optimal Optical/Mechanical Design 5. Rohs Compliant
■ Device Selection Guide -■ Package Outline Dimensions -
*Tolerance :± Unit :±
Page :Model No :CSLR-U502HR4-A0 2. High Luminous Output
LED Lens
Chip
Part No.
CSLR-U502HR4-A0
Water Transparent
AlInGaP
Red
Material
Emitted Color
元器件交易网https://www.wendangku.net/doc/2c9284293.html,
■ Absolute Maximum Rating -
(Ta=25℃)
Symbol Unit Pd mW I F mA I FP mA V R V Topr ℃Tstg ℃
Tsol
* Pulse width ≦0.1 msec. duty ≦1/10
■ Electro-optical Characteristics
(Ta=25℃)
Symbol Min.Typ.Max.Unit Condition
V F ----- 2.1 2.6V I V 660012400-----mcd
λD -----625-----nm 2θ 1/2-----15-----deg I R
-----
-----
50
μA
V R =5V
Page :2/5
Dominant Wavelength
Reverse Current
Peak Forward Current *100Max. 260℃ for 5 sec Max.(3mm from the epoxy body)
Luminous Intensity Parameter
Lead Soldering Temperature
Forward Voltage Storage Temp.
Viewing Angle I F =20mA
Operating Temp.Power Dissipation Forward Current (DC)Reverse Voltage Model No :CSLR-U502HR4-A0Parameter
-40 ~ +100
Rating 52530-30 ~ +80元器件交易网https://www.wendangku.net/doc/2c9284293.html,
Part No.Code
min.max.R1620625R2625630R3
630635
Part No.Code
min.max.B 1.6 1.8C 1.8 2.0D 2.0 2.2E 2.2 2.4F
2.4 2.6
Notes:
1. Tolerance of measurement of luminous intensity :±15%
2. Tolerance of measurement of Color Coordinates :±0.01
3. Tolerance of measurement of forward voltage :±0.05v
4. All data are measured by CSC's test equipment.
5. One delivery will include several color rank, VF rank and Iv ranks of the products.
6. The quantity-ratio of the ranks is decided by CSC.
7. Please confirm with CSC salesman,if your request different form standard specification.
Page :Model No :CSLR-U502HR4-A0
CSLR-U502HR4-A0
■ Dominant Wavelength Rank Limits ( I F = 20mA )
■ Luminous Intensity Rank Limits ( I F = 20mA )
■ Forward Voltage Rank Limits ( I F = 20mA )
unit :v
unit :nm
CSLR-U502HR4-A0
https://www.wendangku.net/doc/2c9284293.html,
元器件交易网https://www.wendangku.net/doc/2c9284293.html,
Model No:CSLR-U502HR4-A0
■ Typical Electrical / Optical Charateristics Curves -
(Ta = 25℃ Unless Otherwise Noted)
Fig 6.
Page:4/5元器件交易网https://www.wendangku.net/doc/2c9284293.html,
■ Precautions For Use -1. Recommended Soldering conditions Wave Soldering
2. Soldering Iron
Basic SPEC. is ≦5sec. When 260℃. If temperature is higher, time should
be shorter (+10℃→ -1sec.). Power dissipation of iron should be smaller than 15W , and temperature should be controllable. Surface temperature of the device should be under 230℃.3. Static Electricity
a. Static electricity or surge voltage damages LEDs..
It is recommended that a wrist band or an anit-electrostatic glove be used when handling the LEDs.
b. All devices, equipment and machinery must be properly grounded. It is recommended that mesures be taken against surge voltage to the equipment that mounts the LEDs.
Page :Model No :CSLR-U502HR4-A0Note: The specifications are subject to change without notice. Please contact us for updated information.
元器件交易网https://www.wendangku.net/doc/2c9284293.html,