wifi参数

;--------------------------------------------------------------------------------
;wifi/bt/fm/gps/nfc modules configuration
;module_power0: axp used by module, "axp22_dldo1" - use dldo1, not use keep it empty
;module_power0_vol: power0 voltage, mv;
;chip_en: enable chip io
;lpo_use_apclk: ""- not use, "losc_out"- a23/33/H3, "ac10032k1"、"ac10032k2"、"ac10032k3"- a80
;--------------------------------------------------------------------------------
[module_para]
module_power0 = port:PL07<1><0>
module_power0_vol = 0
module_power1 = port:PG13<1><0>
module_power1_vol = 1
module_power2 =
module_power2_vol =
module_power3 =
module_power3_vol =
chip_en =
lpo_use_apclk = "losc_out"

;--------------------------------------------------------------------------------
;wifi configuration
;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3
;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2
;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0)
;wl_reg_on: wifi function enable pin
;wl_host_wake: wlan device wake-up host pin
;wl_host_wake_invert: whether wl_host_wake use inverter between ap and module
; 0: not used, 1: used
;--------------------------------------------------------------------------------
[wifi_para]
wifi_used = 1
wifi_sdc_id = 1
wifi_usbc_id = 3
wifi_usbc_type = 1
wl_reg_on = port:PL07<1><0>
wl_host_wake = port:PG10<0><0>
wl_host_wake_invert = 0