文档库 最新最全的文档下载
当前位置:文档库 › 2557-X02 DK跌落测试报告(package drop test report)

2557-X02 DK跌落测试报告(package drop test report)

2557-X02 DK跌落测试报告(package drop test report)
2557-X02 DK跌落测试报告(package drop test report)

产品名称product name SAM'S 53型号/规格type /spec.材质

material

/测试日期test date NO.编号

No.

跌落高度drop height 1

8 in (20.3cm )2

8 in (20.3cm )3

8 in (20.3cm )4

8 in (20.3cm )5

8 in (20.3cm )614 in (35.6cm)1

drop position test requirement and

SAM'S 53 #2

1face 1 2face 2 6face 6 2-3-5,,任意选一项conner 2-3-5,Arbitrarily select an item 3-4,任意选一项edge 3-4 arbitrarily select an item 6

face 6测试面1

test face1

(8in/20.3cm)

测试过程(附图)

1、测试方法:test method 依如下高度要求,对产品进行6次跌落

According to the following height requirements, the product 6 drop test

phenomena; ( surface, angle, edge selection see below picture logo).

test face 2

(8in/20.3cm)

测试过程(附图)

测试角4:角 2-3-5,,任意选

一项(8in/20.3cm)

test conner 4:

conner 2-3-5 Arbitrarily

select an item

测试过程(附图)

测试点5:边3-4,任意选一项(8in/20.3cm)

test point Arbitrarily select an item 测试过程(附图)

测试点3:面6(8in/20.3cm)测试过程(附图)

测试面2

test face 2

(8in/20.3cm)

测试过程(附图)

跌落测试图片如下(follow drop test figure):跌落之后图片( after drop tested figure)测试点6:面6(14in/35.6cm)

test point 6:face 6

测试结果(附图)t 跌落部位drop position 测试要求及条件(依据BV测试方法)test requirement and condition(according 3 #2557-X02(DK)包装跌落测试报告(package drop test report)2557-X02送检单位Submission unit 2011-11-5送样数量

sample quantity

面 1

face 1

面 2

face 2

面 6

face 6

角 2-3-5,,任意选一项

conner 2-3-5,Arbitrarily select an item

测试过程 testing process

边3-4,任意选一项

edge 3-4 arbitrarily select an item

面6

face 6

附图)testing process(figure)测试结果(附图)t est reuslt (figure)

没有

No damage

次跌落测试,测试完成后产品不可有明显损坏,破裂等不良现象;(面、角、边选

lowing height requirements, the product 6 drop test, after testing products have no obvious damage, such as r , angle, edge selection see below picture logo).

附图)testing process(figure)

没有No damage 附图)testing process(figure)附图)testing process(figure)附图)testing process(figure)测试过程(附图)t 没有no damage 附图)testing process(figure)没有No damage 测试过程(附图)t 没有

No damage

测试过程(附图)t

测试结果(附图)t

tested figure)PDQ搭桥边角处轻微变形。有一套破损面积小,QAAC判定合格。PDQ bypass corner of slight deformation. There is a set of plastic shell slightly damaged, test results than BV

damage area is small, QAAC considered qualified.

判定judge

OK

判定 judge

图)test reuslt (figure)1箱(case)

ing

drop test report)

C Y houseware https://www.wendangku.net/doc/2215510816.html,

图)t est reuslt (figure)

没有破损

No damage 、边选择参见下图标识)

products have no obvious damage, such as rupture of undesirable

OK 有一套吸塑壳轻微破损,测试结果比BV

破损面积小,QAAC判定合格。er of slight deformation. There is a set l slightly damaged, test results than BV is small, QAAC considered qualified.

相关文档