Linetype
Keyboard: LINETYPE
Alias: -LT
Defines linetypes (sequences of alternating line segments, dots, and spaces), loads them from libraries, and sets the current linetype.
1.Continuous linetype.
2.Dashed linetype.
3.Dotted linetype.
4.Center linetype (one dot and one dash).
5.Phantom linetype (two dots and one dash).
Linetype: ?to list ? Create ?Load ? Set: To create a new linetype, choose Create. To load a linetype from a library, choose Load. To specify the current linetype, choose Set. To display a list of the linetypes defined, choose ?.
To create a new linetype
Choose Create.
Name for new linetype: Enter the name of the new linetype. The Create or Append Linetype File dialog box appears. Select an existing linetype definition (.lin) file or type the name of a new file. Click Save.
Linetype description: Type a description of the linetype, such as "Telephone line."
Linetype definition (positive numbers for lines, negative for spaces):
A, Type a number to indicate the length of a line dash. Type a negative number for the length of a space. Type 0 (zero) for a dot. Separate numbers with a comma. There must be a gap after each line or space. The A means the ends of the linetype will be adjusted to fit between two points. For example, 2,-1,0,-1 draws a dash 2 units long, followed by a gap 1 unit long, followed by a dot, followed by another gap 1 unit long.
Linetype "name" was defined in filename.lin. A message is displayed, reporting that your linetype definition was saved in the .lin file. If there is an error in the linetype code you type, you will receive an error message indicating that syntax errors were found.
To load a linetype
Choose Load.
Enter linetype to load: Enter the name of the linetype you want to load. The Create or Append Linetype File dialog box appears. Select the linetype definition file (.lin), and then click Open.
Linetype name loaded. To use the linetype, you must use the Set option or use the Linetype command to assign the linetype to a layer name.
To set the current linetype
Choose Set.
? to list linetypes in drawing ? Linetype to set as current
To view a list of available linetypes
Choose?.
The Select Linetype File dialog box appears. Select the name of the file (.lin) containing the linetypes you want to view. The linetypes included in the file you select are displayed in the Prompt History window.