MARKING (EXAMPLE)
Line 1, A (for AVX), 5 = 50 Volts (V is optional),
E = TC Line 2, 104Z = Capacitance Code Line 3, T olerance, 2 digit Lot Code Date Code:8 = 2008
10 = Week Four Digit Date Code Optional
For Military/Established Reliability Molded/Axial Lead see MIL-C-11015, MIL-PRF-39014, MIL-PRF-20 Section.Dimensions: Millimeters (Inches)
AVX MA Series
Molded Axial Leaded MLC
Temperature Coefficient:C0G (NP0), X7R, Z5U 50V , 100V and 200V
Case Material:Molded Epoxy Lead Material:Solderable
GENERAL DESCRIPTION
-20%
? C tolerance available C0G (NP0) from 1.0 to 9.1 pF only. Minimum tolerance for values 10 pF - 100 pF is D or F whichever is greater.
C0G (NP0) Dielectric
Dimensions: Millimeters (Inches)
For other tolerances see Part No. Codes For other voltages see Part No. Codes.AVX Style
Axial Leads/Packaging
TAPE AND REEL
Leader Tape:300mm min. (12")Splicing:Tape Only
Missing Parts:0.25% of component count max.-
No consecutive missing parts
REEL QUANTITIES (MAX.) ?
?1000 pc. reels available for distribution pack only in ±1% and ±2%tolerance.
*
Standard Tape Spacing Shown. Also available in 26.0mm + 1.5mm,
– 0mm, (1.023 in. + .059 in. -0 in. ) for SpinGuards only. EIA Class I, II and III tape spacings are available for molded axials. Tape spacing for Class II is 63.5mm ± 1.5mm (2.50 in ± .059 in), and for Class III 73mm ± 1.5mm (2.87 in ± .059 in)
ADDITIONAL PACKAGING AVAILABLE AMMO PACK
*SpinGuard only
BULK PACK (MOLDED AXIALS ONLY)