TAB-ON TERMINAL
250 Tab-on type
Note: Terminal denoted by * is used only for two wires. If using wires in other combinations than the ones shown above, contact JST. 250 Tab-on piggyback type
TAB-ON TERMINAL 250 Tab-on flag type
205 Tab-on type
187 Tab-on flag type
TAB-ON TERMINAL 187 Tab-on type
Note: Terminal denoted by * is used only for two wires. lf using wires in other combinations than the ones shown above, contact JST.
110 Tab-on type
TAB-ON TERMINAL
*Compliant with RoHS.
*Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog.* Contact JST for details.
Crimping machine, Applicator
TAB-ON-TAB TERMINAL
250 Tab-on tab type
Listed E70188
187 Tab-on tab type
*Compliant with RoHS.
*Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog.* Contact JST for details.
Crimping machine, Applicator
TAB-IN/TAB-IN-TAB TERMINAL
250 Tab-in type
110 Tab-in type
Note: 1. Combine a plated tab-in terminal with a plated tab and a non-plated tab-in terminal with a non-plated tab.
2. This terminal must be built into the model 250 tab-in housing which has numerous circuits, and it cannot be used independently.Model 250 tab-on terminals, however, can be used independently.
3. The above case does not apply when we confirm the condition of application and judge that there is no problem.
Note: 1. Combine a plated tab-in terminal with a plated tab and a non-plated tab-in terminal with a non-plated tab.
2. This terminal must be built into the model 110 tab-in housing which has numerous circuits, and it cannot be used independently. Model 110 tab-on
terminals, however, can be used independently.
Crimping machine, Applicator
TAB-IN/TAB-IN-TAB TERMINAL 250 Tab-in tab type
Note: SIM-21 differs from SIM-51 in terminal size.
110 Tab-in tab type
Crimping machine, Applicator
*Compliant with RoHS.
*Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.