?
COMPONENT DIMENSIONS (mm):
Type Case Size A B C D (ref.) E ±0.1 F ±0.05NIN-HK 0402 1.19 max.0.64 max.0.66 max.0.250.230.15NIN-HJ 0603 1.80 max. 1.20 max. 1.02 max.0.380.350.25NIN-HD 0805 2.40 max. 1.60 max. 1.40 max.0.510.440.15NIN-HC
1008
2.90 max.
2.50 max.
2.03 max.
1.20
0.55
0.15
L
G
H
Type L G H NIN-HK 1.180.360.66NIN-HJ 1.920.64 1.02NIN-HD 2.800.76 1.78NIN-HC
3.31
1.27
2.54
RECOMMEND LAND PATTERN DIMENSIONS (mm)
E E
A C
D F
Wirewound Chip Inductors
NIN-H Series
? SIZES K(0402), J (0603), D (0805) AND C (1008)
? HIGH Q, HIGH CURRENT AND HIGH SRF CHARACTERISTICS
? BOTH FLOW AND REFLOW SOLDERING APPLICABLE*
? HIGH INDUCTANCE AVAILABLE IN SMALL SIZE
? EMBOSSED PLASTIC TAPE PACKAGE FOR AUTOMATIC PICK-PLACE
*FLOW & REFLOW SOLDERING 0805 & 1008 SIZES, 0402 & 0603 REFLOW SOLDERING ONLY
FEATURES
ENVIRONMENTAL CHARACTERISTICS
NIN-H J 6N8 J TR F
Pb-free/RoHS compliant
Taped & Reeled Tolerance Code
(S ±0.3nH, G ±2%, J ±5%, K ±10%, M ±20%) Inductance Value in Nanohenries (see standard values table for correct value code)
Case Code (K=0402, J = 0603, D = 0805, C = 1008) Series
PART NUMBER SYSTEM Speci? cations
Case Size Code 0402 (K)0603 (J)0805 (D)1008 (C)Inductance Range 1.0nH ~ 68nH 1.8nH ~ 270nH 2.2nH ~ 910nH 10nH ~ 4.7μH
Inductance Tolerance
±0.3nH (S), ±5% (J)
±2% (G), ±5% (J), ±10% (K), ±20% (M)Operating Temperature Range
-40°C ~ +125°C
Test Speci? cations Test Method & Condition
Solderability
75% Min. Coverage
After 3 sec. dip in +230°C soldering pot (post ? ux)Resistance to Soldering Heat
(1) No evidence of damage
(2) Inductance change ±5% of initial value
(3) Q factor within ±10% of initial value (±20% for 0402 & 0603 case sizes)
After 5 seconds at +260°C (with pre-conditioning)Humidity
(1) No evidence of damage
(2) Inductance change ±5% of initial value (±10% for 0402 case size)
(3) Q factor within ±10% of initial value (±20% for 0402 & 0603 case sizes)After 500 hours at 60°C and 90 ~ 95% RH
(0402 case size - after 96 hours 50°C and 90 ~ 95% RH)
Low Frequency Vibration
After 2 hrs per axis, 10 ~ 55Hz, 1.5mm amplitude Thermal Shock After 100 cycles (10 cycles 0402) at -40°C and +125°C
(30 minutes at each temperature)
Low Temperature Storage After 500 hrs at -40°C
High Temperature Load Life
(1) No evidence of damage
(2) Inductance change ±10% of initial value (±20% for 0402 case size)
(3) Q factor within ±10% of initial value (±20% for 0402 & 0603 case sizes)
After 500 hrs at +125°C with rated DC current (0402 case size - after 1,000 hrs at +85°C)
Humidity Load Life
No evidence of short or open circuit
After 500 hrs at 60°C with 90 ~ 95% RH with rated DC current
(0402 case size- 1,000 hrs at +40°C)
RoHS Compliant
includes all homogeneous materials *See Part Number System for Details
Wirewound Chip Inductors NIN-H Series
Wirewound Chip Inductors NIN-H Series NIN-HJ SERIES J-SIZE (0603) STANDARD VALUES
Wirewound Chip Inductors NIN-H Series
Wirewound Chip Inductors NIN-H Series
TAPE AND REEL DIMENSIONS (mm):
Wirewound Chip Inductors
NIN-H Series
EMBOSSED PLASTIC CARRIER DIMENSIONS (mm)