iMotion Design Kit Support Release Notes_Rev1.3
233 Kansas Street El Segundo California 90245 Fax-On-Demand 310 252 7100 Website
https://www.wendangku.net/doc/3510615301.html,
Release Note
Product Name: iMotion Design Kit Support
Product Version: 1.3
Date: October 16, 2008
Dear Valued Customer:
Thank you for your purchase of iMOTION TM based development system from International Rectifier. With this system you will experience a new design and development platform for appliance motor drive system.
All documentation and software is included in the released CD.
You can reach us at following URL with regard to any technical issues.
https://www.wendangku.net/doc/3510615301.html,/technical-info/
Sincerely,
iMotion Development Team
International Rectifier
233 Kansas Street
El Segundo, CA 90245
Reference Design Kit Terms and Conditions
The design information and specifications contained herein are proprietary to International Rectifier. This design information and specifications are valuable design and manufacturing tools, intended solely for the use and benefit of the purchaser of this Reference Design Kit. Use of this Reference Design Kit, in whole or in part, is granted solely to the original purchaser of this Reference Design only for its own use and benefit in designing its line of products. Use of this design for any application should be fully verified by the customer. International Rectifier cannot guarantee suitability for your applications, and is not liable for any result of usage for such applications including, without limitation, personal or property damage or violation of third party intellectual property rights.
International Rectifier Reference Design information and specifications are confidential and should be handled accordingly and should not be divulged to any third party without prior written approval from International Rectifier.
Supported 300 Series iMotion Design Kits:
IRMCS3041 Reference Design Kit V2.0
IRMCS3043 Reference Design Kit V3.0
IRMCS3012 Reference Design Kit V2.1
IRMCK341PROG Programming Kit V1.0
IRMCK311PROG Programming Kit V1.0
IRMCK343PROG Programming Kit V1.0
IRMCK371PROG Programming Kit V1.0
IRMCK312PROG Programming Kit V1.0
During installation you may select which kit’s support files will be installed. Each installation type includes kit specific software and documentation. If no kit is selected then only the base documentation and applications will be installed.
Design Kit specific design files are stored in the “My Documents\iMotion” directory. Documentation, datasheets, and applications are placed at the location specified by the user while running the installer.
Each selected kit will be accompanied by their own ‘Release Notes’ which details the hardware side of the kit as well as kit specific documentation and software.
Included Windows Software:
MCEDesigner - V1.0.7.4
MCEWizard - V1.3.3.0
V2.4
-
MCEProgrammer2
MCECompiler Library - V1.00
Included Base Documentation:
iMotion License Agreement
IRMCF300 Errata Sheet
IRMCK300 Errata Sheet
IRMCx300 Application Developer’s Guide - V1.1
IRMCx300 Software Developer’s Guide - V1.1
IRMCx300 Reference Manual – V2.10
300 Series Transition Guide – V2.0
MCEDesigner Errata Sheet – V1.0
MCEDesigner 1.0.7.4 User’s Guide
IRMCK3XXPROG User’s Guide – V1.0
iMotion Design Kit Registration Instruction – V1.0
Additional documentation is available on the web at https://www.wendangku.net/doc/3510615301.html,/technical-info/appnotes.htm.
Supported Operating Systems
? Windows XP
? Windows Vista
Changes since Previous Release (Rev1.2)
? MCE Program for PFC has been considerably simplified, with unnecessary filters, scaling parameters and registers removed. These changes are reflected in the files IRMCS3012_Release_2_0.mdl and IRMCS3043_Release_2_0.mdl.
?MCEWizard Updated to 1.3 from 1.2.
o The major changes are revisions to the PFC equations to support the simplified PFC program.
o There is an important bug fix, where the GateSenLow &
GateSenHigh bit fields of pwmcfg were reversed. This only causes
problems if the High and Low side gate signals have different
polarity.
?IRMCx300 Reference Manual updated to V2.9 from V2.10. The main changes are improved descriptions of the PFC blocks and registers. Also,
some minor corrections and additions.
?IRMCx300 Application Developer’s Guide updated from V1.0 to V1.1.
Along with minor corrections, a chapter on PFC application development has been added.
?IRSamples 8051 code has been revised slightly to work seamlessly with the MCEWizard parameter output.
?MCEProgrammer2 has an additional option to program OTP memory through the FS2 JTAG debugger.
?In MCEProgrammer2, the option “Generate FS2 TCL Script With Embedded EEPROM Image” creates a script which only works properly with the parallel-port version of the FS2 debugger. In a future release, this
will be updated to support the most recent USB version of the FS2 debugger.
?Microsoft Windows 2000 and Windows NT are no longer supported for MCEWizard and MCEProgrammer.