当前位置：文档库 › RMDVB1-25SS003L中文资料

RMDVB1-25SS003L中文资料

PCB ordering information - page 30

SERIES-INSULATOR STYLE-MATERIAL SERIES-INSULATOR STYLE-MATERIAL

MDB - Screw mounting-Diallyl phthalate MDVB - Screw mounting-Polyester H -

Insulated solid or stranded wire L -Uninsulated solid wire

S -Solder pot to accept #26 AWG max.

harness wire.No designator - No hardware - standard mounting .091 (2.31) hole diameter

P -Jackpost

K -Jackscrew-standard L -Jackscrew-low profile F -Float mount

M -Military specification hardware, see page 13.

1-.050 (1.27) centers

9-15-21-25-31-37-51. See page 9P -Pin S - Socket

CONTACT SPACIN G

CONTACT ARRAN G EMENT

CONTACT TYPE

CONTACT SPACIN G CONTACT ARRAN G EMENT CONTACT TYPE TERMINATION TYPE TERMINATION TYPE

LOC K IN G H AR DW ARE (SCRE W MOUNTIN G

ONLY )TERMINATION CO D E LOC K IN G H AR DW ARE

M D** 1-9P H 001P

(H) 001 - 18",7/34strand, #26 AWG, MIL-W-16878/4,T ype E T eflon, Y ellow.(H) 003 - 18",7/34strand, #26 AWG, MIL-W-16878/4,T ype E T eflon, color coded to MIL-S T D-681System I.

(L) 1 - 1/2"uninsulated solid #25 AWG gold plated copper.(L) 2 - 1"uninsulated solid #25 AWG gold plated copper.

TERMINATION CO D E

Ro H S COMPLIANCE

See page 79 and 81for additional codes

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

How to Order

Microminiature Rectangular Connectors with MICRO-Pin Contacts on .050 (1.27)centers.MICRO-D microminiature rack/panel connec-tors are used in applications requiring highly reliable, extremely small, lightweight connec-tors. These connectors are available in 2 insu-lator materials, 2 mounting variations, 7 shell sizes accommodating from 9 to 51 contacts and a special arrangement of 5 micro contacts and 2 coaxials. The insulator materials listed give the MICRO-D connector wide versatility in most applications required by industry.

ITT can also terminate a wide variety of stranded or solid wire directly to MICRO-D contacts, which is often desirable in high den-sity arrangements.

MICRO-D connectors can also be custom har-nessed to meet any customer requirement of single or multiple connectors. Pigtail lead and harness description must be given by the cus-tomer. A typical description would be: .5" #25AWG, gold plated copper leads or 18" of #26yellow, Teflon-insulated, Type E wire. Shown below are various methods of termination.Consult customer service for any routine or complex harnessing of MICRO-D connectors.

?Glass-filled diallyl phthalate thermoset material used in high temperature applica-tions that is immune to cleaning solvents.It also has excellent dielectric properties.Temperature range: -65?F to +300?F (-55?C to +149?C).

?Glass-filled polyester thermoplastic that is not affected by cleaning solvents and exhibits excellent dielectric properties.Temperature range: -55?F to +257?F (-65?C to +125?C).

Specifications

MATERIALS AND FINISHES

Shell/Insulator (One Piece)MD/MDB: Glass-filled

thermoset plastic MDV/MDVB: Thermoplastic ELECTRICAL DATA MECHANICAL FEATURES No of Contacts

Size or Length Coupling Polarization

Contact Spacing Centers Shell Styles

Consult factory for availabilty.

Coaxial Cable

Wire Size

Contact Termination -9to 51: (1 arrangement of 5 contacts and 2 coaxials - for screw mount only)

-7sizes

-Friction/jackscrews

-Keystone-shaped shells -.050 (1.27mm)-Plug and receptacle

-RG-178/U (Not available for MD clip mount)-#24 thru #32 AWG -Multi-indent crimp

-Copper alloy, gold plate

Contacts

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Standard Wire Termination Codes

Cavity #1 black

*The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum.#26 A WG per MIL-W-16878 Type E Teflon ,stranded.

H arness Typ e (H)L ength 3(76.2)

6(152.4)8(203.2)10(254.0)12(304.8)18 (457.2)20(508.0)24(609.6)30(762.0)36(914.4)48(1219.2)72(1828.8)120(3048.0)H020H019H026H029H028H001H038H009H010H011H013H017H042

H027H016H034H025H002H003H023H004H005H006H048H046H041

L61L 56L 57L 39L 58L 1L 14L2L 7L6L 16L 10

.125(3.18).150 (3.81).190(4.83).250 (6.35).375(9.52).500 (12.70).750 (19.05)1.000 (25.40)1.500 (38.10)2.000 (50.80)2.500 (63.50)3.000 (76.20)

All Y ell o w Co l o r Cod e d*T erminati o n Cod e

L ength #25A WG G old P lated Copper

S o li d U ninsulate d Typ e (L)

With Screw Mounting Holes (Conforms to MIL-DTL-83513)

MDB

.110(2.79)MAX.

.154(3.91)(5.08)MAX.

Solder Pot

Glass-filled Diallyl Phthalate Plastic Insulator

MDVB

Glass-filled Polyester Plastic Insulator

Part Number by Shell Size Add lead type and length, see Part Number Explanation.

Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails.

*****A

Max.B Max.C Max.D Max.E Max.F ±.005Avg.Weight***±5% (oz.)±5% (gm.)MDB1-9S**MDB1-15P**MDB1-15S**MDB1-21P**MDB1-21S**MDB1-25P**MDB1-25S**MDB1-31P**MDB1-31S**MDB1-37P**MDB1-37S**MDB1-51P**MDB1-51S**MDVB1-9S**MDVB1-15p**MDVB1-15S**MDVB1-21P**MDVB1-21S**MDVB1-25P**MDVB1-25S**MDVB1-31P**MDVB1-31S**MDVB1-37P**MDVB1-37S**MDVB1-51P**MDVB1-51S**

.788 (20.02).788 (20.02).938 (23.82)1.088 (27.64)1.088 (27.64)1.188 (30.18)1.188 (30.18)1.338 (33.98)1.338 (33.98)1.488 (37.80)1.488 (37.80)1.438 (36.52)1.438 (36.52)

.292 (7.42).380 (9.65).442 (11.23).592 (15.04).680 (17.27).692 (17.58).780 (19.81).842 (21.39).930 (23.62).992 (25.20)1.080 (27.43).942 (23.93)1.030 (26.16)

.408 (10.36).408 (10.36).588 (14.17).708 (17.98).708 (17.98).808 (20.56).808 (20.56).958 (24.33).958 (24.33)1.108 (28.14)1.108 (28.14)1.058 (26.87)1.058 (26.87)

.173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).220 (5.59).220 (5.59)

.218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).260 (6.60).260 (6.60)

.565 (14.35).565 (14.35).715 (18.16).865 (21.97).865 (21.97).965 (24.51).965 (24.51)1.115 (28.32)1.115 (38.32)1.265 (32.13)1.265 (32.13)1.215 (30.86)1.215 (30.86)

.026 (0.73).025 (0.70).038 (1.10).053 (1.50).050 (1.40).063 (1.80).056 (1.60).080 (2.30).073 (2.10).086 (2.45).076 (2.15).109 (3.10)

.093 (2.64)

Dimensions shown in inch (mm)Specifications and dimensions subject to change

MD*B-PCB connectors use standard MD*B all plastic shells and are designed for use with flex circuitry, printed circuit and multi-layer boards. They are easily mounted and soldered and provide high density/high reliability in board-to-board and board-to-cable applica-tions. While being similar to the MDM-PCB connectors, the MD*B-PCB connectors are all plastic, extremely small, and lightweight yet rugged enough for use in the most demanding applications.

MD*B-PCB connectors are available in

seven shell sizes with 9 to 51 contacts in the popular 90°narrow profile PCB termination,with a variety of tail lengths for varying board

thickness.

How to Order

SERIES

CONTACT ARRANGEMENT CONTACT TYPE C

TERMINATION TYPE T

HARDWARE

TERMINATION TAIL LENGTH T

MODIFICATION CODES C

(Consult Factory)M

MD*B

--37S CBR ** * *

L39

RoHS COMPLIANCE R

Jackpost mounting for use with locking hard-ware is also available.

If the connectors shown in the catalog do not meet the requirements of your applica-tions, a special shape, size or layout using the basic all plastic shell can be made avail-able. For further technical and applications information, contact customer service.

CONNECTOR SERIES MDVB, MDB

CONNECTOR ARRANGEMENT

9, 15, 21, 25, 31, 51CONTACT TYPE

S =Socket P =Pin

TERMINATION TYPE

CBR = 90°Narrow Profile PCB Terminations HARDWARE

P =Jackpost

M7 = Jackposts, M635135-07No Letter = Less Hardware

TERMINATION TAIL LENGTH CODES

NONE –.109 (2.77) ±0.15 (0.38) Standard L61– .125 (3.18)L66– .150 (3.81)L57– .190 (4.83)

L39

–.250 (6.35)L58– .375 (9.52)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

CBR Series (90? Mounting Narrow Profile)

TYP .

.186 (4.72) PLUG 9-15-21-25 VIEW

*FOR 31: 1.085 (27.56) MAX. FOR 37: 1.185 (30.10) MAX. FOR 51: 1.225 (31.12) MAX.

I A. TYP

PCB Termination Arrangements (Viewed from bottom of connector, on PCB solder side.)Indentification number shown for plug connector, use reverse order for socket connector.

.083.020.0209Contacts

15 Contacts

21 Contacts 25Contacts

51 Contacts

37 Contacts

31 Contacts

All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27)*For jackpost locking add letter "P" or "M7".

NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped.

Part Number By Shell Size MD*B-9PCBR*MD*B-9SCBR*MD*B-15PCBR*MD*B-21PCBR*MD*B-21SCBR*MD*B-25PCBR*MD*B-25SCBR*MD*B-31PCBR*MD*B-31SCBR*MD*B-37PCBR*MD*B-37SCBR MD*B-51PCBR*MD*B-51SCBR

.788 (20.01).938 (23.82)1.088 (27.63)1.088 (27.63)1.188 (30.17)1.188 (30.17)1.338 (33.98)1.338 (33.98)1.488 (37.79)1.488 (37.79)1.438 (36.52)1.438 (36.52)

.565 (14.35).715 (18.16).865 (21.97).865 (21.97).965 (24.51).965 (24.51)1.115 (28.32)1.115 (28.32)1.265 (32.13)1.265 (32.13)1.215 (30.86)1.215 (30.86)

.292 (7.42).525 (13.34).592 (15.04).675 (17.14).692 (17.58).775 (19.68).842 (21.39).925 (23.50).994 (25.25)1.075 (27.30).942 (23.93)1.026 (26.06)

.218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).218 (5.54).258 (6.55).258 (6.55)

.134 (3.40).218 (5.54).134 (3.40).218 (5.54).134 (3.40).218 (5.54).134 (3.40).218 (5.54).134 (3.40).218 (5.54).177 (4.50).258 (6.55)

.420 (10.67).420 (10.67).420 (10.67).420 (10.67).420 (10.67).420 (10.67).420 (10.67).420 (10.67).520 (13.21).520 (13.21).550 (13.97).550 (13.97)

.250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).300 (7.62).300 (7.62)

.230 (5.84).130 (3.30).130 (3.30).130 (3.30).130 (3.30).130 (3.30).130 (3.30).130 (3.30).130 (3.30).130 (3.30).150 (3.81).150 (3.81)

A Max.B

±.005 (0.13)G

±.010 (0.25)H

±.010 (0.25)C Max.D Max.E Max.F Max.

Dimensions shown in inch (mm)

MDB Coaxial Series with Screw Mounting Holes

MDB connectors with two coaxial and five MICRO-PIN TM /MICROSOCKET TM contacts. Crimp-type coaxial contacts accommodate RG-178/U cables. A plastic insertion/extraction tool is supplied with each connec-tor assembly having removable coaxial assembly.

How to Order - MDB Coaxial

SERIES

MDB

-7

SERIES

Micro-D Coaxial

No Letter - Coaxial assembly

installed and nonremovable RO - coaxial assembly ordered serparately

RA - Coaxial shipped assembled but uninstalled See Standard Wire Termination

Consult customer service

No letter - No hardware

*Not available with removalbe coax cable type connectors RO and RA.standard mounting. 091 (2.31) hole diameter F -Float

K -Jackscrew (standard)L -Jackscrew (low profile)P -Jackpost

Code on page 29. Coaxial cable will be

RG-178U unless otherwise specified; length will be same as wire modification.P -Pin S -Socket L -Uninsulated, solid wire

H -Insulated, solid or stranded S -Solder pot*

1-.050 (1.27) centers

...................7 (2)

SIGNAL CONTACT SPACING TOTAL CONTACT CAVITIES NUMBER OF COAXIALS SIGNAL CONTACT SPACING TOTAL CONTACT CAVITIES NUMBER OF COAXIALS COAXIAL TYPE

COAXIAL TYPE

SIGNAL CONTACT TYPE SIGNAL CONTACT TYPE

SIGNAL CONTACT LEAD TYPE SIGNAL CONTACT LEAD TYPE

SIGNAL CONTACT LEAD LENGTH SIGNAL CONTACT LEAD LENGTH MODIFICATION

HARDWARE

MODIFICATION HARDWARE

RoHS COMPLIANCE R

How to Order - Coaxial Cable Assemblies

SERIES

* * *

COAXIAL CABLE CONTACT TYPE CONTACT TYPE COAXIAL CABLE TYPE

COAXIAL CABLE TYPE COAXIAL CABLE LENGTH

COAXIAL CABLE LENGTH

SERIES MD

P -Pin

(used with socket side connection)S -Socket

(used with pin type connection)See Standard Wire Termination

Codes on page 29. Coaxial cable will be RG-178U unless otherwise specified; length will be the same as wire modfication.

1-RG178/U

COAXIAL CABLE CC

RoHS COMPLIANCE R

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Dimension - MDB Coaxial Series

Plug

Receptacle

(See page 9 for layouts)

Part Number

by Shell Size

MDB1-7C2P*MDB1-7C2S*.510 (12.95).602 (15.29)

* Add lead type and length, see Part Number Explanation.

** Weight given is with 7 inch (177.80) insulated leads, #26 AWG silver plated copper pigtails and RG178/U coaxials.

.204 (5.18).185 (4.70).298 (7.57).279 (7.09).782 (19.86).782 (19.86).395 (10.03).375 (9.52).510 (12.95).540 (13.72).290 (8.30).273 (7.80)

A Ma x.

B Ma x.

C Ma x.E Ma x.E 1Ma x.

D +_.005 (0.13)Av g .W eight**(oz)+

_5% (gm .)+_5%TWO MTG. HOLES RO AND RA COAXES

RO AND RA COAXES

Mounting Hardware Views (Sizes 9-51)

This hardware supplied unassembled.

Screw Lock Assembly

90? Angle Mounting Bracket

Description

Screw Lock Assembly Jackpost Kit

322-9500-000 320-9505-000

015-9516-000 .100 (2.54) .122 (3.10) .257

(6.53)

.215

(5.46)

015-9516-000 Mounting Bracket, 90? Angle- MD*1

for 9 thru 37 Shell Sizes MD*1

for 51 Shell Size

NOTES: Screw lock assembly (322-9500-000) can be used for front front mounting. Jackpost kit

(320-9505-000) consists of 2 assemblies, shipped unassembled.

Part Number ±.005 (0.13)

Max.

*NOTE: Torque value is 4.0 in/lbs max. REF. ONLY

_.003_0.08)

FACE

CONNECTOR HEX HEAD -

Jackscrew - (L) Low Profile

Jackscrew - (K) Standard

This hardware is factory installed.

Shown here is a cutaway view of the float mount for the MD connector.

The basic shell dimensions are the same for the float mount and the screw mounting hole configurations. View shown is for standard float mount front panel mounting. Reverse mounting is available on request.

*NOTE: Torque values are as follows: Low Profile Jackscrew (L)-2.5 in/lbs Standard Jackscrew (K)-2.5 in/lbs

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Mounting Hardware to Military Specification (Sizes 9 - 51) PER MIL-DTL-83513/5

This hardware supplied unassembled.

Jackscrew - (L) Low profile *

.062 (1.57)HEX. (REF.)

.092 (2.34) DIA.

Allen head

Plug and Receptacle Low and High Profile Slotted Head

Jackpost Assembly

Description

Slotted Head Jackscrew Assy Low Profile

Slotted Head Jackscrew Assy High Profile Allen Head Jackscrew Assy Low Profile Allen Head Jackscrew Assy High Profile Jackpost Assy

-05-06-02-03-07

M5M6M2M3M7

320-9508-025320-9508-027320-9508-026320-9508-028320-9505-033

M83513/5

Mode Code Part Number Thread

Jackpost Bushing (For Rear Panel Mounting)

MATING FACE

.126 (3.20).125 (3.18)DIA.TYP .

+.005 (0.13)3/32 (2.4)1/16 (1.6)3/64 (1.2)1/32 (0.8)

.092/.087 (2.34/2.21).061/.056 (2.34/1.42).047/.042 (1.19/1.07).030/.025 (0.76/0.64)

320-9505-007320-9505-006320-9505-005320-9505-004

9152125313751

.379 ( 9.63).529 (13.44).679 (17.25).779 (19.79).929 (23.60)1.079 (27.41)1.029 (26.14)

.219 (5.56).219 (5.56).219 (5.56).219 (5.56).219 (5.56).219 (5.56).261 (6.63)

.565 (14.35).715 (18.16).865 (21.97).965 (24.51)1.115 (28.32)1.265 (32.13)1.215 (30.86)

*2Jackposts, 2nuts, 2washers .

Panel Thickness A Dim.

Jackpost Kit Number*A

+.004 (0.10)-.000 (0.00)Shell Size

Plug and Receptacle Dimensions

B +.004 (0.10)

-.000 (0.00)C +_.005(0.13)

NOTE: Torque value for jackpost 2.5 in /lbs

Panel Mounting Dimensions

.200 ±.005Plug and Receptacle

Rear Mounted

Plug and Receptacle Front Mounted Plug Front Mounted Receptacle Rear Mounted

.300 ±.005Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Panel Cutouts

Figure 1Front Mounting

+.005 (0.13) R TYP -.000 (0.00)

Figure 2Rear Mounting

Figure 3

Edgeboard Mounting

NOTES:

1. 2. 3. 123123123123123123123

.409 (10.39).379 ( 9.63)

-.559 (14.20).529 (13.44)

-.709 (18.00).679 (17.25)

-.809 (20.55).779 (19.79)

-.959 (24.36).929 (23.60)

-1.109 (28.17)1.079 (27.41)

-1.059 (26.90)1.029 (26.14)

-.172 (4.37).219 (5.56)

-.215 (5.46).261 (6.63)

-.570 (14.48).570 (14.48).570 (14.48).720 (18.29).720 (18.29).720 (18.29).870 (22.10).870 (22.10).870 (22.10).970 (24.64).970 (24.64).970 (24.64)1.120 (28.45)1.120 (28.45)1.120 (28.45)1.270 (32.26)1.270 (32.26)1.270 (32.26)1.220 (30.99)1.220 (30.99)1.220 (30.99)

.089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26).089 (2.26)

+.004 (0.10)-.000 (0.00)B

+.004 (0.10)-.000 (0.00)C

+.005 (0.13)-.000 (0.00)D

+.005 (0.13)-.000 (0.00)Cutout Figure Size Front mounting (figure 1) and rear mounting (figure 2) accommodates #2-56 screws.

Front mounting is preferred. However, when rear mounting is necessary. use detail on previous page.

Edgeboard mounting bracket (figure3) uses #2-56 screws. Dimension .450 ± .002 (11.43 ± 0.05) locates the

MD receptacle flush with the end of the board.

Plug

Glass-filled Diallyl Phthalate Plastic Insulator

MDV

Glass-filled Polyester Plastic Insulator

Solder Pot

Receptacle

.130(3.30)(5.33)

(4.32)

.170(4.32)PCB ordering information - page 30

SERIES-INSULATOR STYLE-MATERIAL SERIES-INSULATOR STYLE-MATERIAL

MD - Clip mounting -Diallyl phthalate MDV - Clip mounting-Polyester H

-Insulated solid or stranded wire L -Uninsulated solid wire

S -Solder pot to accept #26 AWG max.

harness wire.

No designator - No hardware - standard mounting .091 (2.31) hole diameter

Not available in clip mounting.

See page 79 and 81for additional codes.

***(H) 001 - 18", 7/34strand ,#26 AWG ,

MIL-W-16878/4, T ype E T eflon ,Y ellow.

(H) 003 - 18", 7/34strand ,#26 AWG ,

MIL-W-16878/4, T ype E T eflon ,color

coded to MIL-S T D-681 System I.

(L) 1 - 1/2"uninsulated solid #25AWG gold plated copper.(L) 2 - 1"uninsulated solid #25AWG gold plated copper.

1-.050(1.27) centers

9-15-21-25-31*-37-51.See page 7P -Pin S - Soc k et

CONTACT SPACIN G

CONTACT ARRAN G EMENT

CONTACT TYPE

CONTACT SPACIN G CONTACT ARRAN G EMENT CONTACT TYPE TERMINATION TYPE TERMINATION TYPE

TERMINATION CO D E **

TERMINATION CO D E LOC K IN G H AR DW ARE

M D

1-9

001

Ro H S COMPLIANCE

Part Number by Shell Size MD1-9P**MD1-9S**MD1-15P**MD1-15S**MD1-21P**MD1-21S**MD1-25P**MD1-25S**MD1-37P**MD1-37S**MD1-51P**MD1-51S**

MDV1-9-P**MDV1-9S**MDV1-15P**MDV1-15S**MDV1-21P**MDV1-21S**MDV1-25P**MDV1-25S**MDV1-37P**MDV1-37S**MDV1-51P**MDV1-51S**

A Max.

B Max.

C Max.

D Max.

E Max.Avg. Weight***±5% (oz.)/±5% (gm.)

.512 (13.00).512 (13.00).662 (16.81).662 (16.81).812 (20.62).812 (20.62).912 (23.16).912 (23.16)1.212 (30.78)1.212 (30.78)1.162 (29.51)1.162 (29.51)

.292 (7.42).376 (9.55).442 (11.23).526 (13.36).592 (15.04).676 (17.17).692 (17.58).776 (19.71).992 (25.20)1.076 (27.33).942 (23.93)1.026 (26.06)

.405 (10.29).405 (10.29).555 (14.10).555 (14.10).705 (17.91).705 (17.91).805 (20.45).805 (20.45)1.105 (28.07)1.105 (28.07)1.055 (26.80)1.055 (26.80)

.170 (4.32).170 (4.32).170 (4.32).170 (4.32).170 (4.32).170 (4.32).170 (4.32).170 (4.32).170 (4.32).170 (4.32).213 (5.41).213 (5.41)

.215 (5.46).215 (5.46).215 (5.46).215 (5.46).215 (5.46).215 (5.46).215 (5.46).215 (5.46).215 (5.46).215 (5.46).258 (6.55).258 (6.55)

.026 (0.73).026 (0.73).038 (1.10).035 (1.00).053 (1.50).050 (1.40).063 (1.80).056 (1.60).086 (2.45).076 (2.15).109 (3.10).093 (2.65)

How to Order

With Clip Mounting Slots

Panel Mounting Hardware

Clip Mounting

Description

Dimensions (Clip Mounting Only)

Coupling Retention Clip

(see Figure 2)

Mounting Screw Brackets

(see Figures 1 and 3)

Panel

Mounting Key

Edgeboard Mounted

(see Figure 4)

Plug and Receptacle

Rear Mounted

Plug and Receptacle

Front Mounted Receptacle Rear Mounted

Part Number

201-9100-000

294-9100-000

015-9100-000

015-5009-000

MD51428-1

Panel Mounting Key

Mounting Key and Coupling Clip Assembly

Mounting Screw Bracket

Edgeboard Mounting Bracket

Edgeboard Mounting Bracket and

Coupling Clip Assembly

Must be ordered separately; specify left and right hand for complete

assembly.

Must be ordered separately; assembly contains set of left and right

hand types.

Illustrated is the recommended method of front mounting

with metal panel mounting keys. Panel mounting keys are

available with or without coupling retention clips.

For front mounting,place the rear of the connector thru

the panel cutout.With the mounting flange against the

panel,fully insert the panel mounting keys thru the slots

in the flange and thru the panel cutout.Retaining the

keys in this position, bend them outward against the rear

of the panel.When mating a front mounted connector

with an unmounted connector, a coupling retention clip

assembly may be used to securely lock the two together.

Mounting screw brackets are available and may be used

instead of the panel mounting keys.

Panel Cutouts

Figure 1

Figure 3

Rear Mounting

Figure 4

Edgeboard Mounting

Figure 2

Front Mounting

MAX. (TYP.)

A panel thickness of 1/8" 3.17mm) maximum is recommended for ease of tab bending

when a panel mounting key & clip assembly or edgeboard mounting brackets are used.

Front mounting is preferred. However, when rear mounting is necessary, use figure 3 for

dimensions.

Figure 4 is for edge board mounting bracket or edgeboard clip assembly. The .184 +_ .002

2.67 +_ 0.05) dimension locates the MD socket insulator flush with the end of the board.

Screw brackets (015-9100-000) will accommodate #2-56 screws.

Front mounting(Figure 1)and rear mounting(Figure 3)accommodate#2-56screws.

Shell

Size

.408 (10.36)

.378 ( 9.60)

.400 (10.16)

.588 (14.94)

.528 (13.28)

.550 (13.97)

.738 (18.75)

.678 (17.27)

.700 (17.78)

.838 (21.29)

.778 (19.76)

.800 (20.32)

1.138 (28.91)

1.078 (27.38)

1.100 (27.94)

1.088 (27.64)

1.028 (26.11)

1.050 (26.67)

.172 (4.37)

.217 (5.51)

.091 (2.31)

.172 (4.37)

.217 (5.51)

.091 (2.31)

.172 (4.37)

.217 (5.51)

.091 (2.31)

.172 (4.37)

.217 (5.51)

.091 (2.31)

.172 (4.37)

.217 (5.51)

.091 (2.31)

.215 (5.46)

.260 (6.60)

.091 (2.31)

.650 (16.51)

.795 (20.19)

.945 (24.00)

1.045 (26.54)

1.345 (34.16)

1.295 (3

2.89)

1.295 (3

2.89)

.089 (2.26)

Cutout

Figure

+.004 (0.10)

-.000 (0.00)

+.004 (0.10)

-.000 (0.00)

+.004 (0.10)

-.000 (0.00)

+.005 (0.13)

-.000 (0.00)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change