Construction
I Round varistor element, leaded
I Coating: epoxy resin, flame-retardant to UL 94 V-0I Terminals: tinned copper wire
Features
I High-energy AdvanceD series E2
I High surge current ratings up to 10 kA I High energy ratings up to 325 J
I Wide operating voltage range 130 … 510 V RMS I
PSpice models
Approvals
I UL I CSA I VDE I
CECC
Taping
I For ordering information see page 206 ff, chapter “Leaded Varistors: Taping ”
Type designation
Detailed description of coding system on page 39, chapter “General Technical Information ”
General technical data Climatic category LCT UCT
Damp heat, steady state (93 % r.h., 40 °C)40/85/56
– 40 °C + 85 °C 56 days in accordance with IEC 60068-1
in accordance with IEC 60068-2-3Operating temperature – 40 … + 85 °C in accordance with CECC 42 000Storage temperature – 40 … + 125 °C
Electric strength 3 2,5 kV RMS in accordance with CECC 42 000Insulation resistance 3 10 M W in accordance with CECC 42 000
Response time
< 25 ns
SIOV-S 14 K 130 E2
Design
Rated diameter of varistor disk
AdvanceD series
Max. AC operating voltage Tolerance of varistor voltage
EPCOS metal oxide varistor Leaded Varistors AdvanceD Series
V RMS
V 130 130 130 130 130
140 140 140 140 140
150 150 150 150 150
175 175 175 175 175
210
Max. clamping voltage
340
340
340
340
340
360
360
360
360
360
395
395
395
395
395
455
455
455
455
455
545
V RMS
V 230 230 230 230 230
250 250 250 250 250
275 275 275 275 275
300 300 300 300 300
320
Max. clamping voltage
595
595
595
595
595
650
650
650
650
650
710
710
710
710
710
775
775
775
775
775
840
V RMS
V 385 385 385
420 420 420
460 460 460
510 510 510
Max. clamping voltage
1025
1025
1025
1120
1120
1120
1240
1240
1240
1355
1355
1355
±mm b max mm
7,0 9,0 12,0 15,5 21,5
7,0 9,0
3
m
a
x
.
7,09,012,015,521,57,09,012,015,521,57,09,012,015,521,57,09,012,015,521,57,09,0 ±mm
b max mm
12,015,521,512,015,521,5
The weight of varistors in
between these voltage classes can be interpolated.
±mm
b max mm
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 801709, 81617 München, DEUTSCHLAND
( ++49 89 636 09, FAX (089) 636-2 2689
EPCOS AG 2002. Vervielf?ltigung, Ver?ffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne aus-drückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elek-troindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Lieferm?glichkeiten richten Sie bitte an den Ihnen n?chstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente k?nnen aufgrund technischer Erfordernisse Gefahrstoffe ent-halten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zust?ndige Vertriebsgesellschaft ein-zuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
( ++49 89 636 09, FAX (089) 636-2 2689
EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representa-tives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.