网站建设外文文献翻译终审稿)

网站建设外文文献翻译文稿归稿存档编号：[KKUY-KKIO69-OTM243-OLUI129-G00I-FDQS58-

On site construction technology

1 Introduction

The development of network technology for today's global information exchange and sharing funding source in the establishment of contacts and

provide more channels and possible. Homes will be known world affairs, according few keyboard or a few mouse clicks can be distant friends thousands

of miles away exchanges, and online communications, Internet browsing, on-line interactive, e-commerce has become a modern part of people's lives. Internet era, has created the new people's work and lifestyle, the Internet, openness and sharing of information model, breaking the traditional mode of information dissemination many barriers for people with new opportunities. With computers and the advent of the information age, the pace of the advance of human

society in gradually accelerated. In recent years the development of web design, fast people occupied.

With the development of web design, a colorful online website together one scenic beauty. To design aesthetic and practical web site should be thoroughly master the building techniques. In building site, we analyzed the websites of objectives, contents, functions, structure, the application of more web design technology. 2 the definition of websit 2.1 How definition of websites Web site identified the tasks and objectives, the building site is the most important issue. Why people will come to your website You have a unique

service The first people to your website is to what They will come back All these issues must be taken into account when the site definition of the problem. Definition site to, first of all, the entire site must have a clear understanding of what the design should understand in the end, the main

purpose of the mission, how to carry out the task of organization and planning. Second, to maintain the high-quality Web site. Many websites in the face of strong competition from high-quality product is the greatest long-term competitive advantage. An excellent Web site should have the following:

(1) users visit Web site is faster.

(2) attention to the feedback and updates. To update the content of the website and timely feedback the user's requirements;

(3) Home design to be reasonable. Home to the first impression left by visitors is important, the design must be attractive in order to have a good visual effect. 2.2 The contents of the website and function

The content of the web site is to be a new, fast, all three sides. The content of the website, including the type of static, dynamic, functional and

things to deal with. Website content is determined in accordance with the nature of the site, in the design of the site, commercial websites, popular science site, company websites, teaching and exchange websites, the content and style are different. We have established websites with the nature of these types of sites are not the same. 2.3 The structure website

(1) site structure;

(2) definition of navigation; (3) Visual Design;

(4) framework and design pages. 3 Site Design and Implementation

With increasing demands on design, high style, high-grade design work before gaining popularity. This also to the designers have put forward higher requirements, from this point of view, the plate design is to meet the requirements of the people should be and Health. The rapid development of science and technology, the Internet into millions of households, also produced a new design space, and a new web design an important part of the field of design. Excellent web design, we must have good creative, so that the audience can be difficult to shift attention long time, produce power. Layout is very important, through text, graphics space portfolio, can best express harmony with the United States. If you want to further understand website design, made separately from other web site's homepage, you need to have more like CSS, javascript, CGI, and other web design technology. In building on the site of the CSS, javascript and other web design technology. 3.1 Application Design website CSS

(1)What is CSS CSS is a style sheet (stylesheet) technology. Some of them called CSS (Cascading Stylesheet).

(2) the combination of CSS and HTML form. Mode 1: The CSS content, as defined in the writing between the labels. Mode 2: CSS will be preserved as a separate text file, and then from labels to call.

(3) CSS the web site of examples. The web site pages, and increase the following definition so that the pages show with special effects. 3.2 Application Design website javascript

javascript and the emergence of making information between users is not only a display and browse the relationship, but to achieve a real-time, dynamic, cross-expression. Thus based on the CGI static HTML pages will be to provide dynamic real-time information, and customer response to the operation of the Web pages replaced. javascript scripting is satisfy this demand arising from the language. It's loved by extensive user. Many scripting language it is in a relatively good. WWW and effectively achieve the combination of the computer network computing and network blueprint.

4 Construction on the site Experience

With the popularity of the Internet, more and more government departments, companies and individuals aware of the need to have their own independent Web site. Below on the design and production sites on some of their own experience. After conducting systematic analysis End, we should carry out system design. Web page design similar to the development of software design, top-down,

bottom-up and continuous updating, and other design methods. The main task is

to design the content of the sites, including the website information organization structure, appearance, content block, navigation and links, directory structure design. System design is the site ready before the

concrete realization of the website to further the realization of more

specific requirements, the overall effect on the website, local details have a clearer idea. This entire process is the key site planning.

Next is how to achieve their own Web site design issues. The realization of the site, I think the need to be considered in two parts: the realization website; Web servers can be achieved. In the process of achieving website, technology selection is very important. Former major use HTML language, the stronger the interactive website, the proposed use of ASP, JSP, PHP and other programming to help achieve,the more complex Web site may also have its own database. The latter is based on all kinds of different operating systems used Web server software installation and debugging. This stage is the whole

process of the most important and most time-consuming part.

When we completed the work, the need for website released. At this stage of the production on the website drawing to a close, the main task is to do a

good job in the website release to the network, the web site for final modifications, testing, homepage can guarantee normal operation of the network.

Published in the website after website to deal with various aspects of the tests, including the possibility of any different web browsers, different visitors have shown normal, ASP, JSP, PHP normal procedure can work, and so on. This stage is the website of trial operation period, the website at this time should be to make up for various shortcomings, the website will be more perfected.

After a period of operation, the site entered the normal operation period, the main task is to update outdated information website, the visitor's message timely feedback to further improve the website, the introduction of new technologies constantly update website, visit web pages more quickly, more aesthetic appearance, Information Resources richer.

Above is the establishment of the station to roughly follow the seven steps, seven steps are complementary, but can be the basis of ease of website and complexity of a weakening or strengthening appropriate link. In short,

building a successful web site is not an easy task, it needs all-round consideration, the Composite various factors.

5 concluding remarks

With the rapid development of Internet technology, in all walks of life have joined the industry to the Internet. Whether from the management side, or from a commercial point of view, the Internet can bring immense vitality. Internet to become a talented designer Shi new world. People will continue to explore, will be the site of the building in the application of new technologies in the web site.

网站建设技术

1 介绍

网络技术的发展,为今天全球性的信息交流与资源共享和交往提供了更多的途径和可能。足不出户便可以知晓天下大事,按几下键盘或点几下鼠标可以与远在千里之外的朋友交流,网上通信、网上浏览、网上交互、网上电子商务已成为现代人们生活的一部分。Internet 时代, 造就了人们新的工作和生活方式,其互联性、开放性和共享信息的模式,打破了传统信息传播方式的重重壁垒,为人们带来了新的机遇。随着计算机和信息时代的到来,人类社会前进的脚步在逐渐加快。近几年网页设计发展,快得让人目不暇接。

随着网页设计技术的发展,丰富多彩的网页成为网上一道亮丽的风景线。要想设计美观实用的网页就应该深入掌握网站建设技术。在建立网站时,我们分析了网站建立的目的、内容、功能、结构,应用了更多的网页设计技术。

2 网站的定义

2.1 如何定义网站

确定网站的任务和目标,是建设网站所面临的最重要的问题。为什么人们会来到你的网站你有独特的服务吗人们第一次到你的网站是为了什么他们还会再来吗这些问题都是定义网站时必须考虑的问题。要定义网站,首先,必须对整个网站有一个清晰认识,弄清到底要设计什么、主要的目的与任务、如何对任务进行组织与规划。其次,保持网站的高品质。在众多网站的激烈竞争中,高品质的产品是长期竞争的最大优势。一个优秀的网站应具备：

（1）用户访问网站的速度要快；

（2）注意反馈与更新。及时更新网站内容、及时反馈用户的要求；（3）首页设计要合理。首页给访问者留下的第一印象很重要,设计务必精美,以求产生良好的视觉效果。

2.2 网站的内容和功能

在网站的内容方面,就是要做到新、快、全三面。网站内容的类型包括静态的、动态的、功能的和事物处理的。确定网站的内容是根据网站的性质决定的,在设计政府网站、商业网站、科普性网站、公司介绍网站、教学交流网站等的内容和风格时各有不同。我们建立的网站同这些类型的网站性质均不相同。

2.3 网站的结构

（1）网站的结构；（2）定义导航；（3）可视化设计；（4）设计框架和页面。

3 网站的设计与实现

随着人们对设计的要求越来越高,高格调,高品位的设计作品,才深受人们的欢迎。这也就给设计者们提出了更高的要求,从这个角度说,板式设计正是满足了人们的要求应需而生。科技的飞跃发展, 让Internet 走进了千家万户,也产生出新的设计领域空间,而网页设计成为新的设计领域的重要内容。优秀的网页设计,必须有好的创意,才能使观者视线久久难移,产生震撼力。版面设计是很重要的,通过文字、图形的空间组合,能最佳的表达出和谐与美。如果想进一步认识网页设计,做出有别于一般网站的网页,就需要掌握更多像CSS 、javascript 、CGI 等网页设计技术。在网站的建设中就应用了CSS 、Javascript 等网页设计技术。

3.1 应用CSS 设计网页

(1) 什么是CSS CSS 是一种样式表(stylesheet)技术。也有的人称之为层叠样式表( Cascading Stylesheet)。

(2) CSS与HTML的结合方式。方式一：将所定义的CSS内容书写在这一对标签之间。方式二：将CSS内容单独保存为一个文本文件,再由标签来调用。

(3) CSS在网站中的应用事例。在网站中的页面,增加了以下的定义, 使页面有特殊的显示效果。

3.2 应用Javascript 设计网页

Javascript的出现使得信息和用户之间不仅只是一种显示和浏览的关系,而是实现了一种实时的、动态的、可交式的表达能力。从而基于CGI静态的HTML页面将被可提供动态实时信息,并对客户操作进行反应的Web页面的取代。Javascript脚本正是满足这种需求而产生的语言。它深受广泛用户的喜爱。它是众多脚本语言中较为优秀的一种。与WWW的结合有效地实现了网络计算和网络计算机的蓝图。

4 关于网站建设的几点体会

随着Internet的普及，越来越多的政府部门、公司和个人意识到需要拥有自己的独立网站。下面就设计和制作网站谈谈自己的一些体会。在进行完系统分析之后，我们就应该进行系统的设计。网页的设计类似于软件开发的设计，有自顶向下、自底向上和不断增补等设计方法。主要任务是网页内容的设计，包括网页的信息组织结构、外观、内容分块、导航与链接、目录结构等设计。系统设计是网站具体实现前的准备，对网页的实现进一步提出更具体的要求，对网页的整体效果、局部细节有更明确的设想。这个过程是整个网站规划中的关键。

接下来就是如何将自己设计的网站实现的问题。对于网站的实现，我认为需要考虑两部分：网页的实现；Web服务器的实现。在网站实现的过程中，技术选型很重要。前者主要使用HTML语言，对于交互性较强的网站来说，建议采用ASP、JSP、PHP等编程来辅助实现，更为复杂的网站可能还会有自己的数据库。后者则用到各种基于不同操作系统的Web服务器软件的安装、调试。这个阶段是整个过程中最主要也最耗时的一部分。

当我们完成了上述工作后，就需要进行网页发布了。到了这个阶段，网页制作就接近尾声，主要工作是把做好的网页发布到网络上，对网页作最后的修改、测试，保证网页能在网络上正常地运行。

在网页发布以后，应对网页进行各个方面各种情况的测试，包括网页能否对任何不同的浏览器、不同的访问者都表现正常，ASP、JSP、PHP程序能否正常工作等等。这个阶段是网页的试运行期，此时应把网页的各种缺陷尽量弥补，使网页更加完善。

经过一段时期的运行，网站就进入了正常运行期，主要工作是及时更新网页过时的信息，及时对访问者的留言做出反馈，进一步完善网页，不断采用新的技术更新升级网页，使网页的访问更迅速，外观更美观，信息资源更丰富。

以上就是建站要大体遵循的七个步骤，这七个步骤是相辅相成的，但可根据网页的难易程度和复杂度适当增强或减弱某个环节。总之，建设一个成功的网站并非一件容易的事，它需要全方位考虑，综合各方面的因素。

5 结束语

随着Internet技术的突飞猛进,各行各业都在加入Internet的行业中来。无论从管理方面,还是从商业角度来看,Internet都可以带来无限生机。Internet成为了一个设计人员施才华的新天地。人们将不断探索,将网站建设中的新技术应用在网站中。

红外数据通信技术外文翻译文献

红外数据通信技术外文翻译文献(文档含中英文对照即英文原文和中文翻译) Infrared Remote Control System Abstract Red outside data correspondence the technique be currently within the scope of world drive extensive usage of a kind of wireless conjunction technique, drive numerous hardware and software platform support. Red outside the transceiver product have cost low, small scaled turn, the baud rate be quick, point to point SSL, be free from electromagnetism thousand Raos

etc. characteristics, can realization information at dissimilarity of the product fast, convenience, safely exchange and transmission, at short distance wireless deliver aspect to own very obvious of advantage. Along with red outside the data deliver a technique more and more mature, the cost descend, red outside the transceiver necessarily will get at the short distance communication realm more extensive of application. The purpose that design this system is transmit customer’s operation information with infrared rays for transmit media, then demodulate original signal with receive circuit. It use coding chip to modulate signal and use decoding chip to demodulate signal. The coding chip is PT2262 and decoding chip is PT2272. Both chips are made in Taiwan. Main work principle is that we provide to input the information for the PT2262 with coding keyboard. The input information was coded by PT2262 and loading to high frequent load wave whose frequent is 38 kHz, then modulate infrared transmit dioxide and radiate space outside when it attian enough power. The receive circuit receive the signal and demodulate original information. The original signal was decoded by PT2272, so as to drive some circuit to accomplish customer’s operation demand. Keywords: Infrared dray；Code；Decoding；LM386；Red outside transceiver 1 Introduction 1.1 research the background and significance Infrared Data Communication Technology is the world wide use of a wireless connection technology, by the many hardware and software platforms supported. Is a data through electrical pulses and infrared optical pulse switch between the wireless data transceiver technology.

通信工程专业英语翻译

通信工程专业英语翻译 JXTA is a crystallization by Sun company's chief scientist Bill Joy's more than twenty years of brewing."JXTA technology is a platform for Network programming and calculation.To solve the modern distribution calculation especially peer-to-peer (Peer to Peer, P2P) in the calculation of the problem".[1] JXTA research project,which will provide a new framework that make the user more convenient to access to connect on the Internet's personal computer resources, thus further expand Internet 's space. At the same time JXTA is also the Sun's "ONE Internet" strategic continuance, and will take a more positive attitude to compete with the .net strategy of Microsoft and Hailstorm plan . JXTA agreement defines a set of six agreement based on XML, the organization of node into node group, release and found some resources, communication and mutual monitoring provides standardized method.(Endpoint Routing Protocol,ERP) is used for node found routing.To send a message to other nodes, and through the potential firewall and connection.(Rendezvous Protocol,RVP) s used for the nodes in the group to spread information.(Peer Resolver Protocol,PRP) is Used to one or more points to send general inquiries, and receive the response of inquiries.

建筑结构设计中英文对照外文翻译文献

中英文对照外文翻译 (文档含英文原文和中文翻译) Create and comprehensive technology in the structure global design of the building The 21st century will be the era that many kinds of disciplines technology coexists , it will form the enormous motive force of promoting the development of building , the building is more and more important too in global design, the architect must seize the opportunity , give full play to the architect's leading role, preside over every building engineering design well. Building there is the global design concept not new of architectural design,characteristic of it for in an all-round way each element not correlated with building- there aren't external environment condition, building , technical equipment,etc. work in coordination with, and create the premium building with the comprehensive new technology to combine together. The premium building is created, must consider sustainable development , namely future requirement , in other words, how save natural resources as much as possible, how about protect the environment that the mankind depends on for existence, how construct through high-quality between architectural design and building, in order to reduce building equipment use quantity and

频谱感知技术外文翻译文献

频谱感知技术外文翻译文献 (文档含中英文对照即英文原文和中文翻译) 译文： 一种新的协作频谱感知算法 摘要 该文提出了一种在认知无线网络控制信道带宽受限条件下基于信任度的双门限协同频谱感知算法。首先每个认知用户基于双检测门限独立进行频谱感知，但只有部分可靠的认知用户通过控制信道向认知无线网络基站发送本地感知结果。当所有的用户都不可靠时，选取信任度最高的认知用户发送本地感知结果进行判决。理论分析和仿真表明，同常规能量检测算法相比较，该算法能够在控制信道带宽受限条件下，以较少的网络开销获得更好的频谱感知性能。 关键词：认知无线电；频谱感知；信任度；双门限 1引言 随着无线通信技术的飞速发展，有限的频谱资源与不断增长的无线通信需求的矛盾越来越突出。然而根据现有的固定分配频谱资源策略，绝大多数频谱资源得不到有效利用。据FCC 的调查统计，70%的已分配频谱资源没有得到有效利用]1[。为了提高频谱资源的利用率，认知无线电技术由Joseph Mitola Ⅲ提出并得到了广泛的关注]5[]2[ 。频谱感知技术是认知无线电网络的支撑技术之一。通常它又可以分为

能量检测法、匹配滤波器法和循环平稳特征法[4]。能量检测算法因为应用简单且无需知道任何授权用户信号的先验知识成为研究热点。认知用户在接入授权频带之前，必须首先感知该频带空闲即授权用户没有工作，否则会对授权用户造成干扰。一旦授权用户重新工作，认知用户必须退避，实现在不对授权用户产生干扰的情况下对频谱资源的共享。由于实际信道中的多径和阴影效应，单个认知用户频谱感知的性能并不乐观，针对这个问题D. Cabric 等人提出了协同频谱感知算法[5]-[6]。协同频谱感知算法性能较好，但是当认知用户数量很大的时候，控制信道的带宽将不够用。文献[7]中提出了一种在控制信道带宽受限条件下的基于双检测门限的频谱感知算法，该算法能够以较小的网络开销，获得接近普通单门限频谱检测算法的性能。针对认知无线电频谱感知的需要，本文提出了认知无线电环境下一种基于信任度的双门限协同频谱感知算法。该算法中每个认知用户基于双检测门限独立进行频谱感知，但只有部分可靠的认知用户通过控制信道向认知无线网络基站发射感知报告。当所有的用户都不可靠时，选取信任度最高的认知用户发射感知报告进行判决。本文对该算法进行了性能分析并通过仿真表明，本文方法比较常规能量检测算法，在减小网络开销的同时提高了检测性能。 2系统模型 假设一个认知无线电网络有N 个认知用户和一个认知无线网络基站，如图1 所示。认知无线网络基站负责管理和联系N 个认知用户，在收到认知用户的检测报告后做出最终判决。 图1. 认知无线电网络示意图 频谱感知的实质是一个二元假设问题，即 01 (),,()()()(),n t H x t h t s t n t H ?=??+? （1）

通信工程项目毕业材料外文翻译

用于多跳认知无线电网络的分布式网络编码控制信道 Alfred Asterjadhi等著 1 前言 大多数电磁频谱由政府机构长期指定给公司或机构专门用于区域或国家地区。由于这种资源的静态分配，许可频谱的许多部分在许多时间和/或位置未使用或未被充分利用。另一方面，几种最近的无线技术在诸如IEEE802.11，蓝牙，Zigbee之类的非许可频段中运行，并且在一定程度上对WiMAX进行操作;这些技术已经看到这样的成功和扩散，他们正在访问的频谱- 主要是2.4 GHz ISM频段- 已经过度拥挤。为了为这些现有技术提供更多的频谱资源，并且允许替代和创新技术的潜在开发，最近已经提出允许被许可的设备（称为次要用户）访问那些许可的频谱资源，主要用户未被使用或零星地使用。这种方法通常被称为动态频谱接入（DSA），无线电设备发现和机会性利用未使用或未充分利用的频谱带的能力通常称为认知无线电（CR）技术。 DSA和CR最近都引起了无线通信和网络界的极大关注。通常设想两种主要应用。第一个是认知无线接入（CW A），根据该认知接入点，认知接入点负责识别未使用的许可频谱，并使用它来提供对次用户的接入。第二个应用是我们在这个技术中研究的应用，它是认知自组织网络（CAN），也就是使用 用于二级用户本身之间通信的无许可频谱，用于诸如点对点内容分发，环境监控，安全性等目的，灾难恢复情景通信，军事通信等等。 设计CAN系统比CW A有更多困难，主要有两个原因。第一是识别未使用的频谱。在CW A中，接入点的作用是连接到互联网，因此可以使用简单的策略来推断频谱可用性，例如查询频谱调节器在其地理位置的频谱可用性或直接与主用户协商频谱可用性或一些中间频谱经纪人另一方面，在CAN中，与频谱调节器或主要用户的缺乏直接通信需要二级用户能够使用检测技术自己识别未使用的频谱。第二个困难是辅助用户协调媒体访问目的。在CW A中存在接入点和通常所有二级用户直接与之通信（即，网络是单跳）的事实使得直接使用集中式媒体接入控制（MAC）解决方案，如时分多址（TDMA）或正交频分多址（OFDMA）。相反，预计CAN将跨越多跳，缺少集中控制器;而对于传统的单通道多跳自组织网络而言，这个问题的几个解决方案是已知的，因为假设我们处理允许设备访问的具有成

高层建筑展望及建筑结构外文文献翻译、中英文翻译、外文翻译

The future of the tall building and structure of buildings Zoning effects on the density of tall buildings and solar design may raise ethical challenge. A combined project of old and new buildings may bring back human scale to our cities. Owners and conceptual designers will be challenged in the 1980s to produce economically sound, people-oriented buildings. In 1980 the Level House, designed by Skidmore, Owings and Merril1 (SOM) received the 25-year award from the American Institute of Architects “in recogn ition of architectural design of enduring significance”. This award is given once a year for a building between 25and 35 years old .Lewis Mumford described the Lever House as “the first office building in which modern materials, modern construction, modern functions have been combined with a modern plan”. At the time, this daring concept could only be achieved by visionary men like Gordon Bunshaft, the designer , and Charles Luckman , the owner and then-president of Lever Brothers . The project also include d a few “first” : (1) it was the first sealed glass tower ever built ; (2) it was the first office building designed by SOM ;and (3) it was the first office building on Park Avenue to omit retail space on the first floor. Today, after hundreds of look-alike and variations on the grid design, we have reached what may be the epitome of tall building design: the nondescript building. Except for a few recently completed buildings that seem to be people-oriented in their lower floors, most tall buildings seem to be arepletion of the dull, graph-paper-like monoliths in many of our cities. Can this be the end of the design-line for tall buildings? Probably cannot. There are definite signs that are most encouraging. Architects and owners have recently begun to discuss the design problem publicly. Perhaps we are at the threshold of a new era. The 1980s may bring forth some new visionaries like Bunshaft and Luckman. If so, what kinds of restrictions or challenges do they face? Zoning Indications are strong that cities may restrict the density of tall buildings, that is, reduce the number of tall buildings per square mile. In 1980 the term

无线射频识别技术外文翻译参考文献

无线射频识别技术外文翻译参考文献(文档含中英文对照即英文原文和中文翻译) 翻译： 当前无线射频识别技术应用略述 摘要 无线射频识别技术可以自动识别多目标并以非接触式方式移动目标。越来越多的零售商、银行、交通管理系统、展览及物流供应商将这项新技术应

用于他们的产品和服务。因此，这给RFID技术的研究带来了机遇和挑战。本文简单介绍了RFID系统的组成、原理及RFID技术的特点。本文比较了RFID 与传统条码，然后提供了一个简短的关于目前RFID应用情况的调查报告。 关键词：无线射频识别技术应用物流

一、简 介 无线射频识别（RFID ）是一种识别技术。与RFID 技术的前身——条码技术相比，RFID 技术具有很多的优点。但由于其成本高，RFID 技术至今未能广泛应用到各行各业。RFID 技术因其无需视线扫描而具有无可比拟的先进性，它能够降低劳动力水平，提高知名度并改善库存管理。 RFID 技术的普及提供了一项人或物体定位及追踪的解决方案。RFID 定位与跟踪系统根据独特的识别标签、阅读器与物体标签间射频通信的信号强度确定物体的空间位置，主要适用于室内，而GPS 系统是不适合应用于室内的。 RFID 技术是一项基于“无线电频率”的非接触式的自动识别技术，自动识别静态或动态的人和对象。 RFID 标签是一个特殊的微芯片，植入商品中，可以跟踪和管理物理对象，是物流管理信息化和跟踪信息化的重要手段。 RFID 的系统组成部分包括： (1）标签（应答器）：对象植入待确定。 (2）阅读器：可以读或读/写，按结构和技术。正如图1-1，RFID 的工作原理 图1-1 RFID 的工作原理 与计算机通讯 阅读器 电磁波（操作指 令和新的数据） 标签 发出的ID 代码和数据

5G无线通信网络中英文对照外文翻译文献

5G无线通信网络中英文对照外文翻译文献(文档含英文原文和中文翻译)

翻译： 5G无线通信网络的蜂窝结构和关键技术 摘要 第四代无线通信系统已经或者即将在许多国家部署。然而，随着无线移动设备和服务的激增，仍然有一些挑战尤其是4G所不能容纳的，例如像频谱危机和高能量消耗。无线系统设计师们面临着满足新型无线应用对高数据速率和机动性要求的持续性增长的需求，因此他们已经开始研究被期望于2020年后就能部署的第五代无线系统。在这篇文章里面，我们提出一个有内门和外门情景之分的潜在的蜂窝结构，并且讨论了多种可行性关于5G无线通信系统的技术，比如大量的MIMO技术，节能通信，认知的广播网络和可见光通信。面临潜在技术的未知挑战也被讨论了。 介绍 信息通信技术（ICT）创新合理的使用对世界经济的提高变得越来越重要。无线通信网络在全球ICT战略中也许是最挑剔的元素，并且支撑着很多其他的行业，它是世界上成长最快最有活力的行业之一。欧洲移动天文台（EMO）报道2010年移动通信业总计税收1740亿欧元,从而超过了航空航天业和制药业。无线技术的发展大大提高了人们在商业运作和社交功能方面通信和生活的能力无线移动通信的显著成就表现在技术创新的快速步伐。从1991年二代移动通信系统(2G)的初次登场到2001年三代系统（3G）的首次起飞，无线移动网络已经实现了从一个纯粹的技术系统到一个能承载大量多媒体内容网络的转变。4G无线系统被设计出来用来满足IMT-A技术使用IP面向所有服务的需求。在4G系统中，先进的无线接口被用于正交频分复用技术（OFDM），多输入多输出系统（MIMO）和链路自适应技术。4G无线网络可支持数据速率可达1Gb/s的低流度，比如流动局域无线访问，还有速率高达100M/s的高流速，例如像移动访问。LTE系统和它的延伸系统LTE-A，作为实用的4G系统已经在全球于最近期或不久的将来部署。 然而，每年仍然有戏剧性增长数量的用户支持移动宽频带系统。越来越多的

土木工程外文文献翻译

专业资料 学院： 专业：土木工程 姓名： 学号： 外文出处：Structural Systems to resist (用外文写) Lateral loads 附件：1.外文资料翻译译文；2.外文原文。

附件1：外文资料翻译译文 抗侧向荷载的结构体系 常用的结构体系 若已测出荷载量达数千万磅重，那么在高层建筑设计中就没有多少可以进行极其复杂的构思余地了。确实，较好的高层建筑普遍具有构思简单、表现明晰的特点。 这并不是说没有进行宏观构思的余地。实际上，正是因为有了这种宏观的构思，新奇的高层建筑体系才得以发展，可能更重要的是：几年以前才出现的一些新概念在今天的技术中已经变得平常了。 如果忽略一些与建筑材料密切相关的概念不谈，高层建筑里最为常用的结构体系便可分为如下几类： 1.抗弯矩框架。 2.支撑框架，包括偏心支撑框架。 3.剪力墙，包括钢板剪力墙。 4.筒中框架。 5.筒中筒结构。 6.核心交互结构。 7. 框格体系或束筒体系。 特别是由于最近趋向于更复杂的建筑形式，同时也需要增加刚度以抵抗几力和地震力，大多数高层建筑都具有由框架、支撑构架、剪力墙和相关体系相结合而构成的体系。而且，就较高的建筑物而言，大多数都是由交互式构件组成三维陈列。 将这些构件结合起来的方法正是高层建筑设计方法的本质。其结合方式需要在考虑环境、功能和费用后再发展，以便提供促使建筑发展达到新高度的有效结构。这并

不是说富于想象力的结构设计就能够创造出伟大建筑。正相反，有许多例优美的建筑仅得到结构工程师适当的支持就被创造出来了，然而，如果没有天赋甚厚的建筑师的创造力的指导，那么，得以发展的就只能是好的结构，并非是伟大的建筑。无论如何，要想创造出高层建筑真正非凡的设计，两者都需要最好的。 虽然在文献中通常可以见到有关这七种体系的全面性讨论，但是在这里还值得进一步讨论。设计方法的本质贯穿于整个讨论。设计方法的本质贯穿于整个讨论中。 抗弯矩框架 抗弯矩框架也许是低，中高度的建筑中常用的体系，它具有线性水平构件和垂直构件在接头处基本刚接之特点。这种框架用作独立的体系，或者和其他体系结合起来使用，以便提供所需要水平荷载抵抗力。对于较高的高层建筑，可能会发现该本系不宜作为独立体系，这是因为在侧向力的作用下难以调动足够的刚度。 我们可以利用STRESS，STRUDL 或者其他大量合适的计算机程序进行结构分析。所谓的门架法分析或悬臂法分析在当今的技术中无一席之地，由于柱梁节点固有柔性，并且由于初步设计应该力求突出体系的弱点，所以在初析中使用框架的中心距尺寸设计是司空惯的。当然，在设计的后期阶段，实际地评价结点的变形很有必要。 支撑框架 支撑框架实际上刚度比抗弯矩框架强，在高层建筑中也得到更广泛的应用。这种体系以其结点处铰接或则接的线性水平构件、垂直构件和斜撑构件而具特色，它通常与其他体系共同用于较高的建筑，并且作为一种独立的体系用在低、中高度的建筑中。

单片机技术发展与应用中英文对照外文翻译文献

(文档含英文原文和中文翻译) 中英文对照外文翻译 单片机技术的发展与应用 从无线电世界到单片机世界现代计算机技术的产业革命，将世界经济从资本经济带入到知识经济时代。在电子世界领域，从 20 世纪中的无线电时代也进入到 21 世纪以计算机技术为中心的智能化现代电子系统时代。现代电子系统的基本核心是嵌入式计算机系统(简称嵌入式系统)，而单片机是最典型、最广泛、最普及的嵌入式系统。 一、无线电世界造就了几代英才。在 20 世纪五六十年代，最具代表的先进的电子技术就是无线电技术，包括无线电广播，收音，无线通信(电报)，业余无线电台，无

线电定位，导航等遥测、遥控、遥信技术。早期就是这些电子技术带领着许多青少年步入了奇妙的电子世界，无线电技术展示了当时科技生活美妙的前景。电子科学开始形成了一门新兴学科。无线电电子学，无线通信开始了电子世界的历程。无线电技术不仅成为了当时先进科学技术的代表，而且从普及到专业的科学领域，吸引了广大青少年，并使他们从中找到了无穷的乐趣。从床头的矿石收音机到超外差收音机；从无线电发报到业余无线电台；从电话，电铃到无线电操纵模型。无线电技术成为当时青少年科普、科技教育最普及，最广泛的内容。至今，许多老一辈的工程师、专家、教授当年都是无线电爱好者。无线电技术的无穷乐趣，无线电技术的全面训练，从电子学基本原理，电子元器件基础到无线电遥控、遥测、遥信电子系统制作，培养出了几代科技英才。 二、从无线电时代到电子技术普及时代。早期的无线电技术推动了电子技术的发展，其中最主要的是真空管电子技术向半导体电子技术的发展。半导体电子技术使有源器件实现了微小型化和低成本，使无线电技术有了更大普及和创新，并大大地开阔了许多非无线电的控制领域。半导体技术发展导致集成电路器件的产生，形成了近代电子技术的飞跃，电子技术从分立器件时代走进了电路集成时代。电子设计工程师不再用分立的电子元器件设计电路单元，而直接选择集成化的电路单元器件构成系统。他们从电路单元设计中解放出来，致力于系统设计，大大地解放了科技生产力，促进了电子系统更大范围的普及。半导体集成电路首先在基本数字逻辑电路上取得突破。大量数字逻辑电路，如门电路，计数器，定时器，移位寄存器以及模拟开关，比较器等，为电子数字控制提供了极佳的条件，使传统的机械控制转向电子控制。功率电子器件以及传感技术的发展使原先以无线电为中心的电子技术开始转向工程领域中的机械系统的数字控制，检测领域中的信息采集，运动机械对象的电气伺服驱动控制。半导体及其集成电路技术将我们带入了一个电子技术普及时代，无线电技术成为电子技术应用领域的一个部分。进20世纪70年代，大规模集成电路出现，促进了常规的电子电路单元的专用电子系统发展。许多专用电子系统单元变成了集成化器件，如收音机，电子钟，计算器等，在这些领域的电子工程师从电路系统的精心设计，调试转变为器件选择，外围器件适配工作。电子技术发展了，电子产品丰富了，电子工程师的难度减少了，但与此同时，无线电技术，电子技术的魅力却削弱了。半导体集成电路的发展使经典电子系统日趋完善，留在大规模集成电路以外的电子技术日益减少，电子技术没有了往昔无线电时代的无穷乐趣和全面的工程训练。 三、从经典电子技术时代到现代电子技术时代进入 20 世纪 80 年代，世界经济

通信工程移动通信中英文对照外文翻译文献

中英文翻译 附件1：外文资料翻译译文 通用移动通信系统的回顾 1.1 UMTS网络架构 欧洲/日本的3G标准，被称为UMTS。 UMTS是一个在IMT-2000保护伞下的ITU-T 批准的许多标准之一。随着美国的CDMA2000标准的发展，它是目前占主导地位的标准，特别是运营商将cdmaOne部署为他们的2G技术。在写这本书时，日本是在3G 网络部署方面最先进的。三名现任运营商已经实施了三个不同的技术：J - PHONE 使用UMTS，KDDI拥有CDMA2000网络，最大的运营商NTT DoCoMo正在使用品牌的FOMA（自由多媒体接入）系统。 FOMA是基于原来的UMTS协议，而且更加的协调和标准化。 UMTS标准被定义为一个通过通用分组无线系统（GPRS）和全球演进的增强数据

技术（EDGE）从第二代GSM标准到UNTS的迁移，如图。这是一个广泛应用的基本原理，因为自2003年4月起，全球有超过847万GSM用户，占全球的移动用户数字的68％。重点是在保持尽可能多的GSM网络与新系统的操作。 我们现在在第三代（3G）的发展道路上，其中网络将支持所有类型的流量：语音，视频和数据，我们应该看到一个最终的爆炸在移动设备上的可用服务。此驱动技术是IP协议。现在，许多移动运营商在简称为2.5G的位置，伴随GPRS的部署，即将IP骨干网引入到移动核心网。在下图中，图2显示了一个在GPRS网络中的关键部件的概述，以及它是如何适应现有的GSM基础设施。 SGSN和GGSN之间的接口被称为Gn接口和使用GPRS隧道协议（GTP的，稍后讨论）。引进这种基础设施的首要原因是提供连接到外部分组网络如，Internet或企业Intranet。这使IP协议作为SGSN和GGSN之间的运输工具应用到网络。这使得数据服务，如移动设备上的电子邮件或浏览网页，用户被起诉基于数据流量，而不是时间连接基础上的数据量。3G网络和服务交付的主要标准是通用移动通信系统，或UMTS。首次部署的UMTS是发行'99架构，在下面的图3所示。 在这个网络中，主要的变化是在无线接入网络（RAN的）CDMA空中接口技术的引进，和在传输部分异步传输模式作为一种传输方式。这些变化已经引入，主要是为了支持在同一网络上的语音，视频和数据服务的运输。核心网络保持相对不变，主要是软件升级。然而，随着目前无线网络控制器使用IP与3G的GPRS业务支持节点进行通信，IP协议进一步应用到网络。 未来的进化步骤是第4版架构，如图4。在这里，GSM的核心被以语音IP技术为基础的IP网络基础设施取代。 海安的发展分为两个独立部分：媒体网关（MGW）和MSC服务器（MSS）的。这基本上是打破外连接的作用和连接控制。一个MSS可以处理多个MGW，使网络更具有扩展性。 因为现在有一些在3G网络的IP云，合并这些到一个IP或IP/ ATM骨干网是很有意义的（它很可能会提供两种选择运营商）。这使IP权利拓展到整个网络，一直到BTS(基站收发信台)。这被称为全IP网络，或推出五架构，如图五所示。在HLR/ VLR/VLR/EIR被推广和称为HLR的子系统（HSS）。 现在传统的电信交换的最后残余被删除，留下完全基于IP协议的网络运营，并

外文翻译通信工程英文的毕业设计论文

编号： 毕业设计(论文)外文翻译 （译文） 学院：信息与通信学院 专业：通信工程 学生姓名： 学号： 指导教师单位：信息与通信学院 姓名： 职称： 2014年 2 月9 日 Radio network planning process and methods for WCDMA Abstract This paper describes the system dimensioning and the radio network planning methodology for a third generation WCDMA system. The applicability of each method is demonstrated using examples of likely system scenarios. The challenges of

modeling the multiservice environment are described and the implications to the system performance simulations are introduced. Keywords: Telecommunication network planning, Mobile radio- communication, Code division multiple access, Wide band transmission, Multiple service network, Dimensioning, Simulator, Static model, Dynamic model, Cellular network. Resume(?) Contents I.Introduction II. Initial planning, system dimensioning III. Detailed planning process IV. Example dimensioning case and verification of dimensioning with static simulations V. Comparison of a static to a dynamic network simulator VI. Conclusion INTRODUCTION As the launch of third generation technology approaches, operators are forming strategies for the deployment of their networks. These strategies must be supported by realistic business plans both in terms of future service demand estimates and the requirement for investment in network infrastructure. Evaluating the requirement for network infrastructure can be achieved using system dimensioning tools capable of assessing both the radio access and the core network components. Having found an attractive business opportunity, system deployment must be preceded by careful network planning. The network planning tool must be capable of accurately modeling the system behaviour when loaded with the expected traffic profile. The third generation cellular systems will offer services well beyond the capabilities of today's networks. The traffic profile, as well as the radio access technology itself form the two most significant challenges when dimensioning and planning a WCDMA based third generation system. The traffic profile describes the mixture of services being used by the population of users. There are also specific system functionalities which must be modelled including fast power control and soft handover. In order to accurately predict the radio coverage the system eatures associated with WCDMA must be taken into account in the network modeling process. Especially the channel characterization, and interference control mechanisms in the case of any CDMA system must be considered. In WCDMA network multiple services co-exist. Different services (voice, data) have different processing gains, Eb/N0 performance and thus different receiver SNR requirements. In addition to those the WCDMA coverage depends on the load characterization, hand over parameterization, and power control effects. In current second generation systems' coverage planning processes the base station sensitivity is constant and the coverage threshold is the same for each base station. In the case of WCDMA the coverage threshold is dependent on the number of users and used bit rates in all cells, thus it

土木 建筑 外文文献翻译 中英文：地下建筑结构

Construction of rock or soil in the construction. It is a modern city of high-speed product development, the city will again ease the contradictions of the role to improve the living environment, but also opened up new human life. Rational development and utilization of human natural and artificial excavation of the underground space, not only help to ease the development of modern urban contradictions, to improve the living environment, but also to open up a new human life. Because of the large-scale development of underground construction, underground architecture is taking shape, its research includes the history of development of underground construction and development of underground space development and utilization of underground space in urban planning, various types of underground construction planning and design, as well as underground construction and related environmental, physiological, psychological and technical issues. Underground construction has a good protective performance, better thermal stability and confined, as well as an integrated economic, social and environmental benefits. Underground construction in a certain thickness of rock or soil, you can avoid or reduce nuclear weapons, conventional weapons, chemical and biological weapons of destruction, while at the same time more effectively to resist earthquakes, hurricanes and other natural disasters. Underground construction in and around the confined environment of relatively stable existence of the temperature field, temperature, or for creating ultra-clean manufacturing environment and at low temperatures or under high-temperature storage of materials, pollution prevention, especially for energy conservation as well. In the city planned the construction of underground construction, urban land use for savings, lower building density, to improve urban transportation, the