Umeclidinium bromide_869113-09-7_MSDS_MedChemExpress

Version 2.1 Revision Date: 07/08/2013

Print Date: 02/28/2014

MSDS

1 Composition

7 Accident Release Measure

Product Name:Umeclidinium bromide

Chemical Name:

CAS No.:869113-09-7

8 Accident Release Measure

Appearance:white to off white(solid)Formula:C29H34BrNO29 Toxicological Information

Solubility:

2 Handling and Storage

10 Regulary Information

3 Stability and Reactivity

11 Disposal Considerations

4 Hazards Identification

12 Transport Information

5 First Aid

13 Other Information

6 Fire Fighting Measures

Caution: Not fully tested. For research purposes only

Medchemexpress LLC

https://www.wendangku.net/doc/3118305721.html,

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions.It does not represent any guarantee of the properties of the product.Medchemexpress LLC shall not be held liable for any damage resulting from handling or from contact with the above product.

RID/ADR- Non-hazardous for road transport. IMDG- Non-hazardous for sea transport.IATA - Non-hazardous for air transport.

As specific country, federal, state and local environmental regulations vary and change frequently we suggest you contact a local, authorized waste disposal contractor for adequate disposal.

CLASSIFICATION- Substance not yet fully tested.SAFETY PHASES- 26-36 (In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable protective clothing.) 36/37/38 (Irritating to eyes, respiratory system and skin.)

To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.

No data available.

PROCEDURE(S) OF PERSONAL PRECAUTION(S)-Wear respirator, chemical safety goggles, rubber boots, and heavy rubber gloves.METHODS FOR CLEANING UP-Sweep up, place in a bag and hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete.

EXTINGUISHING MEDIA Water spray- Carbon dioxide, dry chemical powder, or appropriate

foam.

SPECIAL RISKS Specific Hazard(s)- Emits toxic fumes under fire conditions.

SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.

INHALATION- If inhaled, remove to fresh air. If not breathing give,

artificial respiration. If breathing is difficult, give oxygen.SKIN CONTACT- In case of contact, immediately wash skin with soap

and copious amounts of water.EYE CONTACT- In case of contact, immediately flush eyes with

copious amounts of water for at least 15 minutes.INGESTION- If swallowed, wash out mouth with water provided person is conscious. Call a physician.

Special indication of hazards to humans and the environment.Irritating to eyes, respiratory system and skin.

STABILITY- Stable under normal handling conditions.

MATERIALS TO AVOID- Strong oxidizing agents.REACTIVITY- May emit toxic gasses like Carbon monoxide, Carbon dioxide, Nitrogen oxides upon thermal decomposition.

HANDLING- Do not breathe dust. Avoid contact with eyes, skin,and

clothing.Avoid prolonged or repeated exposure.STORAGE- Please store the product under the recommended conditions in the Certificate of Analysis.

1-Azoniabicyclo[2.2.2]octane, 4-(hydroxydiphenylmethyl)-1-[2-(phenylmethoxy)ethyl]-, bromide (1:1)

DMSO

18W i l k i n s o n W a y , P r i n c e t o n , N J 08540,U S A

E m a i l : i n f o @m e d c h e m e x p r e s s .c o m W e b : w w w .m e d c h e m e x p r e s s .c o m