1-45Model 67
E N V I R O N M E N T A L
Mechanical Stops
Clutch Action, both ends Torque, Starting Maximum 5 oz.-in. (0.035 N-m)Weight, Nominal
.04 oz. (1.13 grams)
Fluorinert? is a registered trademark of 3M Company.Specifications subject to change without notice.
MODEL 67
3/8” Square Multiturn
Cermet Trimming Potentiometer
E L E C T R I C A L
Standard Resistance Range, Ohms 10 to 2Meg
Standard Resistance Tolerance ±10% (<100 Ohms = ±20%)
Input Voltage, Maximum 200 Vdc or rms not to exceed power rating Slider Current, Maximum 100mA or within rated power, whichever is less
Power Rating, Watts
0.5 at 85°C derating to 0 at 125°C
End Resistance, Maximum
2 Ohms
Actual Electrical Travel, Turns, Nominal 20Dielectric Strength
900 Vrms Insulation Resistance, Minimum 1,000 Megohms Resolution
Essentially infinite
Contact Resistance Variation, Maximum
1% or 1 Ohm, whichever is greater
T O P A D J U S T M E N T (I n c h /m m )
Model 67
1-46S T A N D A R D R E S I S T A N C E V A L U E S , O H M S
102005K 50K 500K 2050010K 100K 1Meg 501K 20K 200K 2Meg
1002K 25K 250K
1-47Model 67
S I D E A D J U S T M E N T (I n c h /m m )
P A C K A G I N G
Standard:Boxes
Capacity=100 Units (67W)
=50 Units (All other styles)
Option:Tubes
All units oriented with #1 pin to same side.
Pin Style P W,Y X,Z
Magazine Width=0.57”0.28”0.28”
Height=0.66”0.93”0.93”
Length=20.9”20.6”24.4”
Capacity=50 Units50 Units50 Units
Option:Tape & Reel, Ammo Pack (Available only for 67W and 67X)
All units oriented with #1 pin to the right of the direction of feed.
Seat Plane to
Centerline of
Sprocket Hole=.71” (18.03 mm)
Tape Width=18 mm
Sprocket=Single Hole .50” spacing
Capacity=1,000 Units
Reel Diameter=14” (363 mm)
Ammo Tape Fold=12” (305 mm)
Box= 1.8” x 13” x 10”
(46mm x 330mm x 254mm)
Model 67
1-48
1
1-49
Model 67
O R D E R I N G I N F O R M A T I O N
C I R C
U I T D I A G R A M
N O T E S