GCS_Datasheet
PORTABLE GROUND CONTROL STATION UAV Factory’s Ground Control Station (GCS) contains all hardware for controlling a high performance unmanned aircraft vehicles and managing payload. GCS is based on Panasonic’s field proven CF-31 rugged laptop, has additional 17’’ super-bright touch screen payload display, and flexible power system with dual battery setup with advanced
status monitoring features.
GCS can be configured to accept autopilot-specific ground side hardware. GCS is available completely configured for Procerus Technologies Commbox, please contact for configuration packages for Micropilot, Cloud Cap Technologies or other manufacturer ground side equipment. Video receiver equipment can be factory integrated into the GCS.
With the capability to be powered from 12-32 VDC or
110-240 VAC, the GCS can be used anytime, anywhere.
Integrated hot-swappable dual Lithium battery bays as well
as intuitive battery condition monitoring system will enable
to use the GCS up to 2 hours on a single battery set.
Batteries can be hot-swapped without switching off the
system, allowing for an increase in operation time.
GCS has a set of integrated safety features, including over
voltage protection, over current protection, reverse voltage
protection as well as battery over-discharge protection.
The integrated power supply system can
provide additional 12 VDC, 50 W power
source to auxiliary subsystems such as
tracking antennas or video receivers,
eliminating the need for additional power
supply or batteries.
The GCS is packed into the military grade
transportation case and has internal storage
for joystick, RC-transmitter, mouse and small
components such as wiring, antennas,
external GPS antenna.
UAVFACTORY LTD.I VAT reg.: LV40103258664
Address : 24A-52 Ganibu Dambis, LV1005, Latvia I Tel: +371 29119398 I Fax: +371 63048747
sales@https://www.wendangku.net/doc/4a1623545.html, I https://www.wendangku.net/doc/4a1623545.html,
System status monitoring
Docked
CF-31
Power input/output,
GPS connector,
antenna connectors
17” payload
super-bright
touch screen
display
Dual hot-swappable
Lithium batteries
Autopilot-specific ground hardware Joystick & accessories
UAVFACTORY LTD. I VAT reg.: LV40103258664
Address : 24A-52 Ganibu Dambis, LV1005, Latvia I Tel: +371 29119398 I Fax: +371 63048747sales@https://www.wendangku.net/doc/4a1623545.html, I
https://www.wendangku.net/doc/4a1623545.html, MECHANICAL SPECIFICATIONS
DIMENSIONS
250 x 830 x 532 mm WEIGHT
28 kg CASE
Molded plastic case ENVIRONMENTAL PROTECTION
Splash resistant when closed OPERATING TEMPERATURE -20 to +60 °C
ELECTRICAL SPECIFICATIONS
DC INPUT 12 – 32 V power supply Over voltage protection
Reverse polarity protection AC INPUT 110 – 240 V power supply
50 – 60 Hz BATTERY TYPE
Lithium Ion BATTERY CAPACITY
86.4 Wh BATTERY OPERATION TIME 2 hours
COMPUTER SPECIFICATIONS
COMPUTER MODEL
Panasonic Toughbook CF-31DURABILITY
MIL-STD-810G & IP65 certified (6' drop)DISPLAY TYPE
13.1" XGA touchscreen LED 1024x768BRIGHTNESS
1100 nits COMPUTER MOUNTING
Dock station CPU
Intel Core i5-2520M vPro Processor 2.4GHz (contact for options)STORAGE
Shock-mounted flex-connect hard drive with quick-release
320GB 7200rpm (contact for options)RAM MEMORY 4GB SDRAM (DDR3-1333MHz) (contact for options) PAYLOAD DISPLAY SPECIFICATIONS
DISPLAY TYPE
17 " TFT touchscreen 1280 x 1024 (SXGA) BRIGHTNESS 1600 nits
AUTOPILOT SPECIFIC CONFIGURATION
COMPATIBILITY
Directly Compatible with Procerus Technologies Commbox
Other autopilot compatibilities on request INPUT DEVICES Wireless laser mouse, RC type transmitter (optional), Joystick (optional)