Positive Negative Component
Percent
Factored Component Nominal Nominal
Tolerance Contribution
Total Tolerance Monte +
-+ / -Tolerance
Squared
Carlo
1最小实体状态长度 1.95 1.95
0%02理论尺寸 0.375
0.375
0%
3基准孔BC 0.050.025
71%0.000625
4理论尺寸 1.375 1.375
0%
050.125小孔 00%0
60.125小孔 0.00514%0.00002570.125小孔 BC
0.005
14%0.000025
80.125小孔最小实体状态半径 0.13/2
0.065
0%090%010
0%
Sub Total: 1.95 1.8150.035100%0.039
0.026
Nominal:0.035
MRSS RSS MC
Min Max Stat. Min Stat. Max 0.1
0.17
0.096
0.174
Positive Negative Component
Percent
Factored Component Nominal Nominal
Tolerance Contribution
Total Tolerance Monte +
-+ / -Tolerance
Squared
Carlo
1最小实体状态长度 1.95 1.95
0%02理论尺寸 0.375
0.375
0%
3基准孔BC 0.050.02571%0.0006254基准孔BC 0.010.005
14%0.000025
5理论尺寸 1.375 1.375
0%
060.125小孔 00%0
70.125小孔
0.005
14%0.000025
80.125小孔最小实体状态半径 0.13/2
0.065
0%090%010
0%
Sub Total: 1.95 1.8150.035100%0.039
0.026
Nominal:0.035
MRSS RSS MC
Min Max Stat. Min Stat. Max 0.1
0.17
0.096
0.174
Objective:Author:
Chen jinlong
Problem:计算最大最小壁厚 (不带基准偏移)
Revision:Direction:Program 计算最大最小壁厚
Stack #:Product:Date:Jun. 22th -2010
Chen jinlong
Author:
Description
0.135
Results:
Component Assembly
Part Number
Rev.Item
Tolerance Stack
Problem:计算最大最小壁厚 (带基准偏移)
Revision:Direction:Results:
0.135
计算最大最小壁厚
Program Product:Objective:Tolerance Stack
Component Assembly
Part Number
Rev.Item
Description
Date:Stack #:Jun. 22th -2010
Omnex Inc.1/1Rev. 05/07