SELECTION GUIDE
FEATURES
s Twin Independent Outputs s Output/Output Isolation 1kVDC s Power Sharing on Outputs s Input/Output Isolation 1kVDC s SIP & DIP Package Styles s Efficiency to 80%
s Power Density 0.85W/cm 3s 5V & 12V Input s One 5V Output (V1)s 3.3V, 5V, 9V, 12V and 15V Output (V2)s Footprint from 1.17cm 2s UL 94V-0 Package Material s No Heatsink Required s Internal SMD Construction s Toroidal Magnetics s Fully Encapsulated
s No External Components Required s MTTF up to 1.9 Million hours s PCB Mounting
s Custom Solutions Available DESCRIPTION
The NMD series of DC-DC converters are ideally suited to applications where a
potential difference exists between loads, eg motor control circuits. The twin outputs offer cost and space savings by consolidating two DC-DC Converters into one package. All of the rated power may be drawn from a single output provided the total load does not exceed 1 Watt.
Nominal Input Output Output Output Output
Voltage Voltage 1Voltage 2Current 1Current 2Efficiency MTTF 1
Order Code
(V)(V)(V)(mA)(mA)(%)kHrs NMD050503D 55 3.3100152701615DIP NMD050503S 55 3.3100152701615SIP NMD050505D 555100100701615DIP NMD050505S 555100100701615SIP NMD050509D
5591005680669DIP NMD050509S 5591005680669SIP NMD050512D 55121004280339DIP NMD050512S 55121004280339SIP NMD050515D 55151003480187DIP NMD050515S 55151003480187SIP NMD120505D 125510010070489DIP NMD120505S 125510010070489SIP NMD120509D 12591005680343DIP NMD120509S 12591005680343SIP NMD120512D 125121004280229DIP NMD120512S 125121004280229SIP NMD120515D 125151003480148DIP NMD120515S
12
5
15
100
34
80
148
SIP
When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external capacitance value for guaranteed start up. The slower the rise time of the input voltage the greater the maximum value of the additional external capacitance for reliable start up.
Parameter
Conditions
MIN
TYP
MAX
Units
Continuous operation, 5V input types 4.55 5.5Voltage Range
Continuous operation, 12V input types 10.81213.2
V
Parameter
Conditions
MIN TYP MAX Units
Rated Power 2
T A = 0°C to 125°C 1W
Voltage Set Point Accuracy See tolerance envelope
Line Regulation
High V IN to low V IN
1.0
1.2%/%
10% load to rated load, 3.3V output types 1510% load to rated load, 5V output types
15Load Regulation 10% load to rated load, 9V output types
10%
10% load to rated load, 12V output types 1010% load to rated load, 15V output types
10Ripple & Noise BW=DC to 20MHz, All output types
75
mV p-p
Short-circuit duration 3
1 second Lead temperature 1.5mm from case for 10 seconds 300°C Input voltage V IN , NMD05 types 7V Input voltage V IN , NMD1
2 types
15V
INPUT CHARACTERISTICS
OUTPUT CHARACTERISTICS
ABSOLUTE MAXIMUM RATINGS
1Calculated using MIL-HDBK-217F with nominal input voltage at full load.2See derating curve
3Supply voltage must be discontinued at the end of the short circuit duration.
All specifications typical at T A =25°C, nominal input voltage and rated output current unless otherwise specified.
NMD SERIES
Isolated 1W Twin Output DC-DC Converters
https://www.wendangku.net/doc/465021351.html,
NMD SERIES
Isolated 1W Twin Output DC-DC Converters
C&D Technologies (NCL) Ltd T anners Drive, Blakelands North Milton Keynes MK14 5BU, England T el:+44 (0)1908 615232 Fax:+44 (0)1908 617545email: info@https://www.wendangku.net/doc/465021351.html,
www: https://www.wendangku.net/doc/465021351.html,
C&D Technologies (NCL), Inc. 5816 Creedmoor Road, Raleigh NC 27612, USA
Tel: +1 (919) 571-9405Fax: +1 (919) 571-9262
email: info@https://www.wendangku.net/doc/465021351.html,
C&D Technologies (NCL) Limited reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. Please check with your supplier or visit our web site to ensure that you have the current and complete specification for your product before use.? C&D Technologies (NCL) Limited 2001
NDC NMD.3
No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to,photography, photocopy, magnetic or other recording means, without prior written permission from C&D Technologies (NCL) Limited.Instructions for use are available from https://www.wendangku.net/doc/465021351.html,
ISOLATION CHARACTERISTICS
PERFORMANCE CHARACTERISTICS
GENERAL CHARACTERISTICS
TEMPERATURE CHARACTERISTICS
PIN CONNECTIONS
Parameter
Conditions
MIN
TYP
MAX
Units
Isolation Test Voltage
Flash tested for 1 second
1000VDC
Resistance Viso=500VDC
1
G ?
Parameter
Conditions
MIN
TYP
MAX
Units
Switching Frequency All input types 100kHz
Parameter
Conditions
MIN
TYP
MAX
Units
Specification All output types 070°C Storage –55150°C
Cooling
Free air convection
14 Pin DIP PIN
1GND 7NC 80V 9+V2100V 11+V114V IN
7 Pin SIP
PIN 1V IN 2GND 4+V150V 6+V270V
tolerance envelope +10%
+5%V nominal
+2.5%-2.5%-7.5%
10
50
100
Output Load Current (%)
19.809
.80
MECHANICAL DIMENSIONS
6.80
15.24
7.62
4.1
0.50±0.05
0.50±0.05
0.50±0.05
7.62
19.506.00
10.0
2.00
1.25
15.24
4.1
All dimensions in mm XX.XX ±0.25mm. All pins on a
2.54mm pitch and within ±0.25mm of true position.
14 Pin DIP
Weight: 2.3g
7 Pin SIP
Weight: 2.3g
NMD050509D
YYWW
NMD120515S
YYWW
0.25±0.05
0.25±0.05
8
91110147
1temperature derating graph
2.0
1.5
1.00.50