marlow industries inc.
?
Thermoelectric Cooler
MI4040
102-0053, Rev H
Positive Lead
Ordering Options
? For example, and MI4040 with only the hot side metallized is specified as an MI4040-02BC ? Pretinned metallized ceramic surface(s) with 117°C solder.
? Thermistor mounted on edge of cold side ceramic.(Calibration available.)
? Elevated temperature burn-in with test data provided.
MI4040-01both surfaces are metallized –cooler is mounted and shipped on test base
MI4040-02hot side exterior is metallized –cooler is mounted and shipped on test base
MI4040-03
no exterior metallization
Thermoelectric Cooler
MI4040
Copyright 2000, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0053, Rev H
For performance information with hot side temperatures other than 27°C or 50°C, consult one of our Applications Engineers.
Installation
Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide.
Operation Cautions
For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To
minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method.
Marlow Industries, Inc.10451 Vista Park Road Dallas Texas 75238-1645TEL: 214-340-4900FAX: 214-341-5212
Internet: https://www.wendangku.net/doc/485032540.html, Marlow Industries Europe Aberdeen House, South Road
Haywards Heath
West Sussex RH164NG UK TEL: +44 (0)1444-443404FAX: +44 (0)1444-443334Marlow Industries Asia
1-1-8-401
Uehara, Shibuya-ku Tokyo, Japan 151-0064TEL: +81 (3) 5454-5280FAX: +81 (3) 5454-5281