CBP1255-390中文资料

Chokes

Drum Core Inductor CBP1254

?High DC levels.?Compact size.

?Low loss Ferrite material.?Cost effective.

?

Available with heat shrink vinyl cover.

?Other applications include: Line Filters, Speaker

Crossover Networks, SCR and Triac Controls etc.

MECHANICAL

ELECTRICAL SPECIFICATION

229 Colonnade Road, Nepean, Ontario, Canada K2E 7K3 Tel: (613) 226-1626 Fax: (613) 226-7124 https://www.wendangku.net/doc/4b5660682.html,

An ISO 9001 Registered Company

31-4

CBP1254-33G 3.3

0.003115.027.0 1.11CBP1254-39G 3.90.00395.027.0 1.11CBP1254-47G 4.70.00395.027.0 1.11CBP1254-56G 5.60.00479.027.0 1.11CBP1254-68G 6.80.00479.027.0 1.11CBP1254-82G 8.20.00469.027.0 1.11CBP1254-10010.00.00561.027.0 1.11CBP1254-12012.00.00555.027.0 1.11CBP1254-15015.00.00649.027.0 1.11CBP1254-18018.00.00841.027.0 1.11CBP1254-22022.00.00938.021.0 1.11CBP1254-270

27.00.01036.021.0 1.15CBP1254-33033.00.01131.021.0 1.15CBP1254-39039.00.01220.021.0 1.15CBP1254-47047.00.01830.214.4 1.14CBP1254-56056.00.01926.114.4 1.14CBP1254-68068.00.02124.414.4 1.14CBP1254-82082.00.02322.414.4 1.14CBP1254-101100.00.02520.014.4 1.14CBP1254-121120.00.02818.014.4 1.19CBP1254-151150.00.04016.411.4 1.13CBP1254-181180.00.04514.611.4 1.13CBP1254-221220.00.05013.211.4 1.13CBP1254-271

270.0

0.056

11.8

11.4

1.16

Ind. (1)Max DCR I DC (2)I Rated (3)E Part No.

±10% (μH)(?)(Amp) DC (Amp) RMS (Nom.)

I S S U E A

C B P 1254 91/04/15

A B C

E

1.60

1.05

Hole to clear See Electrical No. 8/32 screw

Specs. table.

Dimensions, Inches (mm)The CBP1254 series Inductors are wound on “Drum” style ferrite cores and are ideal for use as Input/Output filter Inductors in Switch Mode Power Supplies.

CBP1254-331330.00.07411.49.0 1.13CBP1254-391390.00.08210.97.2 1.19CBP1254-471470.00.1149.27.2 1.13CBP1254-561

560.0

0.1258.37.2 1.13CBP1254-681680.00.1397.67.2 1.13CBP1254-821820.00.154 6.87.2 1.19CBP1254-1021000.00.122 6.2 5.5 1.06CBP1254-1221200.00.232 5.7 5.5 1.16CBP1254-1521500.00.324 5.1 4.5 1.16CBP1254-1821800.00.360 4.6 4.5 1.16CBP1254-2222200.00.494 4.2 4.0 1.06CBP1254-2722700.00.555 3.8 4.0 1.06CBP1254-3323300.00.773 3.4 2.8 1.06CBP1254-3923900.00.845 3.1 2.8 1.13CBP1254-4724700.0 1.140 2.9 2.0 1.11CBP1254-562

5600.0

1.600

2.5

2.0

1.11

Ind. (1)Max DCR I DC (2)I Rated (3)E Part No. ±10% (μH)(?)(Amp) DC (Amp) RMS

(Nom.)1) Tolerances on values below 10 μH are ±20%.

2) I DC is the current for which the Inductance is reduced by appr. %5 of its initial value.

3) I RATED is the current (RMS), limited by the copper loss and the guage of the wire in the winding.

NOTES

元器件交易网https://www.wendangku.net/doc/4b5660682.html,