AK NetApp at a glance2

Short term steps:

1. Upgrade AKFiler6/7 with DOT, shelf firmware, disk firmware and FCIs to address single paths to shel

2. Move data from AKFiler3 to AKFiler10 and retire AKFiler3

3. Explore where data from PHSA-NTAP can be moved - can it go to AKFiler10 in PRB or does it have to r

4. Upgrade DOT, shelf firmware and disk firmware to most current levels for all arrays except the ones

5. Add ordered shelf to AKFiler8 (what is status of order?)

6. Check with NetApp - can we get grace period on maintenance renewal for arrays expiring in Dec 2011

7. If no grace period and no schedule for replacement, renew maintenance for AKFiler6/7, AKFiler5, AKF

8. Develop proposals for addressing all issues in AK NetApp environment

a. Replace equipment in PRB with new arrays, replace or repurpose best of the rest for PAMC, new

b. Shore up existing environment by replacing old controllers, out of support hardware, upgradin

c. Explore options to NetApp filers

d. Other options

FCIs to address single paths to shelves - scheduled for 12/5 (may have to install FCI cards later if they don't a AKFiler10 in PRB or does it have to reside in PAMC? If it can be, migrate data to AKFiler10 and retire PHSA-NTAP levels for all arrays except the ones already done (AKFiler4/10, AKfiler5 (AKFiler6/7 to be upgraded on 12/5)) ewal for arrays expiring in Dec 2011 if we are actively working to replace them?

tenance for AKFiler6/7, AKFiler5, AKFiler9, AKFiler8, IAKFiler1, IAKFiler2 by 12/31/11; cost = $110,705 + cost of urpose best of the rest for PAMC, new arrays in remote locations

rs, out of support hardware, upgrading all to multipath, upgrade to current versions of DOT, shelf and disk firmwa

FCI cards later if they don't arrive by 12/5) AKFiler10 and retire PHSA-NTAP

/7 to be upgraded on 12/5))

/11; cost = $110,705 + cost of AKFiler5?

s of DOT, shelf and disk firmware