RT_duroid_6006_6010_laminate_data_sheet_

RT/duroid ? 6006/6010LM High Frequency Laminates

RT/duroid ? 6006/6010LM microwave laminates are ceramic-PTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. RT/duroid 6006 laminate is available with a dielectric constant value of 6.15 and RT/duroid 6010LM laminate has a dielectric constant of 10.2.

RT/duroid 6006/6010LM microwave laminates feature ease of fabrication and stability in use. They have tight dielectric constant and thickness control, low moisture absorption, and good thermal mechanical stability.RT/duroid 6006 laminates are supplied clad both sides with ? oz. to 2 oz./ft 2 (9 to 70 μm) electrodeposited copper foil. RT/duroid 6010 laminates are supplied clad both sides with 5 micron (0.025” (0.625mm) dielectric thickness only) to 2 oz./ft.2 ( 5 to 70 μm) electrodeposited (ED) copper foil. Cladding with rolled copper foil is also available. Thick aluminum, brass, or copper plate on one side may be speci ? ed.

Standard tolerance dielectric thicknesses of 0.010”, 0.025”, 0.050”, 0.075”, and 0.100” (0.254, 0.635, 1.270, 1.905, 2.54 mm) are available. When ordering RT/duroid 6006 and RT/duroid 6010LM laminates, it is important to specify dielectric thickness, electrodeposited or rolled, and weight of copper foil required.

Data Sheet

1.6000

Advanced Circuit Materials

Advanced Circuit Materials Division

100 S. Roosevelt Avenue

Chandler, AZ 85226

Tel: 480-961-1382, Fax: 480-961-4533

https://www.wendangku.net/doc/4c6060788.html,

The world runs better with Rogers.?

Features

?High dielectric constant for circuit size reduction.?Low loss. Ideal for operating at X-band or below.?Low Z-axis expansion for RT/duroid 6010LM.

Provides reliable plated through holes in multilayer boards.

?Low moisture absorption for RT/duroid 6010LM. Reduces effects of moisture on electrical loss.?Tight εr and thickness control for repeatable circuit performance.

Some Typical Applications

?Space Saving Circuitry ?Patch Antennas

?Satellite Communications Systems ?Power Ampli ? ers

?Aircraft Collision Avoidance Systems ?

Ground Radar Warning Systems

Typical Values

[1] SI unit given ? rst with other frequently used units in parentheses.

[2] References: APR4022.33 DJS 4019.27-32, Internal TR 2610. Tests were at 23°C unless otherwise noted. Typical values should not be used for speci ? cation limits.[3] Dielectric constant is based on .025 dielectric thickness, one ounce electrodeposited copper on two sides.Typical values are a representation of an average value for the population of the property. For speci ? cation values contact Rogers Corporation.

RT/duroid 6006, RT/duroid 6010LM Laminates

The information in this data sheet is intended to assist you in designing with Rogers’ circuit material laminates. It is not intended to and does not create any warranties express or implied, including any warranty of merchantability or ? tness for a particular purpose or that the results shown on this data sheet will be achieved by a user for a particular purpose. The user should determine the suitability of Rogers’ circuit material laminates for each application.These commodities, technology and software are exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law prohibited.

RT/duroid, The world runs better with Rogers. and the Rogers’ logo are licensed trademarks for Rogers Corporation.?1991, 1992, 1994, 1995, 1998, 2002, 2005, 2006, 2007, 2008, 2009 Rogers Corporation, Printed in U.S.A. All rights reserved.

Revised 12/2009 0890-1209-.5CC Publication: #92-105

CONTACT INFORMATION:

USA: Rogers Advanced Circuit Materials Tel: 480-961-1382 Fax: 480-961-4533Belgium: Rogers BVBA - Gent Tel: 32-9-2353611 Fax: 32-9-2353658Japan: Rogers Japan Inc. Tel: 81-3-5200-2700 Fax: 81-3-5200-0571Taiwan: Rogers Taiwan Inc. Tel: 886-2-86609056 Fax: 886-2-86609057Korea:

Rogers Korea Inc.

Tel: 82-31-716-6112 Fax: 82-31-716-6208Singapore: Rogers Technologies Singapore Inc.

Tel: 65-747-3521 Fax: 65-747-7425China:

Rogers (Shanghai) International Trading Co., Ltd Tel: 86 21 62175599 Fax: 86 21 62677913

Property

Typical Value [2]

Direction

Units [1]Condition

Test Method

RT/duroid 6006RT/duroid 6010.2LM [3]Dielectric Constant εr 6.15± 0.1510.2 ± 0.25Z 10 GHz/A IPC-TM-650 2.5.5.5Dissipation Factor, tan δ0.00270.0023Z 10 GHz/A IPC-TM-650 2.5.5.5Thermal Coef ? cient of εr -410-425Z

ppm/°C -50 to 170°C

IPC-TM-650 2.5.5.5

Surface Resistivity 7X1075X106Mohm A IPC 2.5.17.1Volume Resistivity 2X107

5X105

Mohm?cm

A

IPC 2.5.17.1

Youngs’ Modulus

ASTM D638

(0.1/min. strain rate)

under tension 627 (91)517 (75)931 (135)559 (81)X Y MPa (kpsi)A ultimate stress 20 (2.8)17 (2.5)17 (2.4)13 (1.9)X Y MPa (kpsi)

A ultimate strain

12 to 134 to 6

9 to 157 to 14

X Y

%

A

Youngs’ Modulus

ASTM D695

(0.05/min. strain rate)

under compression

1069 (155)2144 (311)Z MPa (kpsi)A ultimate stress 54 (7.9)47 (6.9)Z MPa (kpsi)

A

ultimate strain

3325Z %Flexural Modulus

2634 (382)1951 (283)4364 (633)3751 (544)X MPa (kpsi)A

ASTM D790

ultimate stress

38 (5.5)36 (5.2)32 (4.4)X Y MPa (kpsi)

A

Deformation under load 0.332.100.261.37Z Z

%24 hr/ 50°C/7MPa 24 hr/150°C/7MPa ASTM D621Moisture Absorption 0.050.05%

24 hr/23°C, 0.050”( 1.27mm)

thick

IPC-TM-650, 2.6.2.1

Density

2.7

3.1ASTM D792

Thermal Conductivity 0.490.78W/m/K 23 to 100°C ASTM C518Thermal Expansion 4734, 1172424,47X Y,Z ppm/°C 0 to 100°C

ASTM 3386(5K/min)Td

500500°C TGA ASTM D3850Speci ? c Heat 0.97 (0.231) 1.00 (0.239)J/g/K (BTU/lb/°F)Calculated

Copper Peel 14.3 (2.5)12.3 (2.1)pli (N/mm)

after solder ? oat IPC-TM-650 2.4.8

Flammability Rating 94V-094V-0UL

Lead-Free Process Compatible

Yes

Yes

STANDARD THICKNESS:

STANDARD PANEL SIZE:

STANDARD COPPER CLADDING:

0.005” (0.127mm)0.010” (0.254mm)0.025” (0.635mm)0.050” (1.27mm)0.075” (1.90mm)0.100” (2.50mm)

10” X 10” (254 X 254mm)10” X 20” (254 X 508mm)20” X 20” (508 X 508mm)

5 μm (RT/duroid 6010 0.025” (0.635mm) dielectric thickness only), ? oz. (9 μm) electrodeposited copper foil.

? oz. (17 μm), 1 oz. (35μm), 2 oz. (70μm) electrodeposited and rolled copper foil.

Heavy metal claddings are available. Contact Rogers Customer Service.