FAG_Sets_of_Mounting_Tools_WL80-49E

FAG sets of mounting tools

EINBAU.SET.ALU and EINBAU.SET.ST

The FAG sets of mounting tools are suitable for cost-effective and safe mount-ing of rolling bearings with bore diame-ters of 10 mm to 50 mm or an outside di-ameter of 26 mm to 110 mm.

Sleeves, spacers, seals and similar parts can also be easily mounted by using the EINBAU.SET.ALU and

EINBAU.SET.ST (former FAG designa-tion 172013).

Tightly fitted inner rings can be dri-ven onto the shaft or outer ring into the housing bore by hitting the mounting sleeve with the hammer. In this way rolling elements and raceways do not transmit the mounting force and be-come damaged. The perfectly matched precision components insure uniform transmission of the forces onto the faces of the bearing rings.

Where the EINBAU.SET.ALU is

concerned the mounting sleeves are made of aluminium and the mounting rings of plastic. The components are easy to handle and relatively reasonable in price.A long wear-free period of application is achieved with the EINBAU.SET.ST where mounting sleeves and rings are made of steel. The tools can also be used with workshop power presses.

FAG Mounting Tool Set EINBAU.SET.ALU Application · Features

Application

225 different rolling bearings and other components can be mounted for a particularly good price with the EINBAU.SET.ALU. This mounting tool set is very easy to handle thanks to the lightness of the components.

Features

The tool set comprises 33 different mounting rings and 3 mounting sleeves as well as a hammer. The rings are made of shock-proof plastic eliminating metal to metal contact and damage to the bear-ing seats or their premature wear. The mounting sleeves are made of aluminium. The head of the recoilless hammer (0.7 kg) does not emit sparks. Each sleeve can be pushed over the shaft end as far as 220 mm.

The combination of mounting ring and sleeve required for the application in question can be taken from the table on the lid of the case.

The parts are driven onto the shaft by hitting the sleeve with the enclosed ham-mer.

The tools are conveniently kept in a case.

Size of box: 430 x 320 x 100 mm.Delivery includes:

33 mounting rings

3 mounting sleeves

1 hammer

1 case

Weight of complete tool set:

4.7 kg

Order designation for tool set:

EINBAU.SET.ALU

FAG

2

FAG Mounting Tool Set EINBAU.SET.ALU

Selection Table

3FAG

Mounting Mounting ring Series Series Series Series Series Series Series Series sleeve No.

60, 6212, 2272B 32213, 222NU/NJ/N 302, 30331363, 6413, 2373B 332232, 3, 4322323

10-26600012910-30620012003200

220010-356300130012-28600112-32

620112013201

220112-37

630113012301A

15–32600215–35620212027202B 3202220215–42630213023302

30302230217–35600317–40620312037203B 320330203220317–47

6303

13037303B

3303

30303

230320–42600420–47620412047204B 3204204220420–52630413047304B 3304213043043030432304

6403230425–47600525–52

620512057205B 32052220520530205B

220525–62630513057305B 3305213053053030531305640423053230530–55600630–62620612067206B 3206222062063020622063220630–72

630613067306B

3306

21306

30630306

313066405230640532306

35–62600735–72

620712077207B 3207222072073020722073220735–80630713077307B 33072130730730307313076406230740632307

40–68

600840–80620812087208B 3208222082083020822083220840–90

630813087308B 3308213083083030831308640723082230840732308

C

45–75600945–85620912097209B 3209222092093020922093220945–100630913097309B 3309213093093030931309640823092230940832309

50–80601050–90621012107210B 3210222102103021022103221050–110

631013107310B

3310

2131031030310

313106409

2310

22310

409

32310

If only bearing outer rings are to be installed, for example when shaft is dismounted, the mounting rings no. 50-90, no. 45-100 and no. 50-110 are used according to the following table.

50–906011601245–100

601312117211B 32112221121162112211C

50–110

601412127212B 321222212212601512137213B 321322213213621222127311B

3311

213113116213221322311

410

631113116410

2311

FAG Mounting Tool Set EINBAU.SET.ST Application · Features

Application

The mounting tool set

EINBAU.SET.ST (former FAG designa-tion 172013) is suitable for maximum stressing and a long life. The tools can also be used for pressing in or out on workshop power presses.

Features

The tool set comprises 33 different hardened mounting rings and 5 mount-ing sleeves made of tool steel. The nylon head of the recoilless hammer (0.7 kg) does not emit sparks. Each sleeve can be pushed over the shaft end as far as 220 mm.

The combination of mounting ring and sleeve required for the application in question can be taken from the table on the lid of the box.

Integrated O rings allow the parts to be fitted into each other in positive con-tact. The parts are driven onto the shaft by hitting the sleeve with the enclosed hammer.

The tools are conveniently kept in a tin box.

Size of box: 370 x 320 x 70 mm.Delivery includes:

33 mounting rings

5 mounting sleeves

1 hammer

1 tin box

Weight of complete tool set:

21 kg

Order designation for tool set:

EINBAU.SET.ST

FAG4

FAG Mounting Tool Set EINBAU.SET.ST

Selection Table

Mounting Mounting ring Series Series Series Series Series Series Series Series sleeve No.60, 6212, 2272B32213, 222NU/NJ/N302, 303313

63, 6413, 2373B332232, 3, 4322323

1 (10-26 mm)6000129

2 (10-30 mm)620012003200

2200

3 (10-35 mm)63001300

A 4 (12-28 mm)6001

5 (12-32 mm)620112013201

2201

6 (12-3

7 mm)63011301

2301

7 (15–32 mm)6002

8 (15–35 mm)620212027202B3202

2202

9 (15–42 mm)63021302330230302

B2302

10 (17–35 mm)6003

11 (17–40 mm)620312037203B320330203

2203

12 (17–47 mm)630313037303B330330303

2303

13 (20–42 mm)6004

14 (20–47 mm)620412047204B3204204

2204

15 (20–52 mm)630413047304B3304213043043030432304

64032304

C16 (25–47 mm)6005

17 (25–52 mm)620512057205B32052220520530205

2205

18 (25–62 mm)630513057305B3305213053053030531305

6404230532305

19 (30–55 mm)6006

20 (30–62 mm)620612067206B32062220620630206

220632206

21 (30–72 mm)630613067306B3306213063063030631306 D6405230640532306

22 (35–62 mm)6007

23 (35–72 mm)620712077207B32072220720730207

220732207

24 (35–80 mm)630713077307B3307213073073030731307

6406230740632307

25 (40–68 mm)6008

26 (40–80 mm)620812087208B32082220820830208

27 (40–90 mm)630813087308B33082130830830308

6407230822308407

28 (45–75 mm)6009

29 (45–85 mm)620912097209B32092220920930209

220932209

E30 (45–100 mm)630913097309B3309213093093030931309

640823092230940832309

31 (50–80 mm)6010

32 (50–90 mm)621012107210B32102221021030210

221032210

33 (50–110 mm)631013107310B3310213103103031031310

640923102231040932310 If only bearing outer rings are to be installed, for example when shaft is dismounted, the mounting rings no. 32 (50-90mm), no. 30 (45-100mm)

and no. 33 (50-110mm) are used according to the following table.

32 (50–90 mm)6011

6012

30 (45–100 mm)601312117211B321122211211

62112211

E33 (50–110 mm)601412127212B321222212212

601512137213B321322213213

621222127311B331121311311

6213221322311410

63111311

64102311

5FAG

Other FAG Publications

A selection of other FAG publication

Catalogue WL 41 520FAG Rolling Bearings

Publ. No. WL 00 106W.L.S. Rolling Bearing Learning System

Publ. No. WL 80 100Mounting and Dismounting of Rolling Bearings

Publ. No. WL 80 102How to Mount and Dismount Rolling Bearings Hydraulically

Publ. No. WL 80 103FAG Hydraulic Nuts

Publ. No. WL 80 107FAG Induction Heating Equipment

Publ. No. WL 80 111Rolling Bearing Mounting Cabinet and Mounting Sets - a fundamental course for vocational training Publ. No. WL 80 123All about the Rolling Bearing - FAG T raining Courses on Rolling Bearings Theory and Practice Publ. No. WL 80 102Rolling Bearing Damage

TI No. WL 00-11FAG Videos on Rolling Bearings

TI No. WL 80-9FAG Heating Rings

TI No. WL 80-14Mounting and Dismounting of Spherical Roller Bearings with Tapered Bore

TI No. WL 80-38Mounting of Self-Aligning Ball Bearings on Adapter Sleeves

TI No. WL 80-46FAG Hand Pump Sets

TI No. WL 80-47FAG Induction Heating Devices

TI No. WL 80-48FAG Mechanical Extractors

TI No. WL 80-51FAG Temperature Measuring Instrument

FAG6

Notes

7FAG

FAG OEM und Handel AG A company of the FAG Kugelfischer Group Postfach 1260 · D-97419 Schweinfurt Tel.+49-97 21 / 91-38 41

Fax+49-97 21 / 91-38 09

E-mail:koeniger_p@fag.de

https://www.wendangku.net/doc/4e10327826.html,