1/9
March 2004s
PROPAGATION DELAY TIME:
t PD =40ns (TYP .)at V DD =10V C L =50pF s HIGH TO LOW LEVEL LOGIC CONVERSION s
HIGH "SINK"AND "SOURCE"CURRENT CAPABILITY
s
QUIESCENT CURRENT SPECIFIED UP TO 20V
s 5V,10V AND 15V PARAMETRIC RATINGS s
INPUT LEAKAGE CURRENT
I I =100nA (MAX)AT V DD =18V T A =25°C s
100%TESTED FOR QUIESCENT CURRENT
DESCRIPTION
The HCF4049UB is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages.It is an inverting Hex Buffer/Converter and feature logic level conversions using only one supply voltage (V DD ).
The input high level signal (V IH )can exceed the V DD supply voltage when these devices are used
for logic level conversions.This device is intended for use as CMOS to DTL/TTL converters and can drive directly two DTL/TTL loads (V DD =5V,V OL ≤0.4V and I OL ≤ 3.2mA.
HCF4049UB
HEX BUFFER/CONVERTER
(INVERTING)
PIN CONNECTION
ORDER CODES
PACKAGE TUBE T &R
DIP HCF4049UBEY SOP
HCF4049UBM1
HCF4049UM013TR
HCF4049UB
2/9
INPUT EQUIVALENT CIRCUIT
PIN DESCRIPTION
TRUTH TABLE
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings are those values beyond which damage to the device may occur.Functional operation under these conditions is not implied.
All voltage values are referred to V SS pin voltage.
RECOMMENDED OPERATING CONDITIONS
PIN N°
SYMBOL
NAME AND FUNCTION 3,5,7,9,11,14A,B,C,D,E,
F
Data Inputs 2,4,6,10,12,15G,H,I,J,K,L Data Outputs 13,16NC
Not Connected
8
V SS Negative Supply Voltage 1
V DD
Positive Supply Voltage
INPUTS OUTPUTS A,B,C,D,E,F
G,H,I,J,K,L
L H H
L
Symbol Parameter
Value Unit V DD Supply Voltage -0.5to +22V V I DC Input Voltage -0.5to +18V I I DC Input Current
±10mA P D Power Dissipation per Package
200mW Power Dissipation per Output Transistor 100mW T op Operating Temperature -55to +125°C T stg
Storage Temperature
-65to +150
°C
Symbol Parameter
Value Unit V DD Supply Voltage 3to 20V V I Input Voltage
-0.5to 15V V T op
Operating Temperature
-55to 125
°C
HCF4049UB
3/9
DC SPECIFICATIONS
The Noise Margin for both "1"and "0"level is:1V min.with V DD =5V,2V min.with V DD =10V,2.5V min.with V DD =15V
Symbol
Parameter
Test Condition
Value Unit
V I (V)V O (V)
|I O |(μA)V DD (V)
T A =25°C -40to 85°C -55to 125°C Min.
Typ.Max.Min.
Max.Min.
Max.I L
Quiescent Current
0/550.0213030μA
0/10100.02260600/15150.024*******/20200.04
20
600
600
V OH
High Level Output Voltage
0/5<15 4.95 4.95 4.95V
0/10<1109.959.959.950/15<11514.95
14.95
14.95
V OL
Low Level Output Voltage 5/0<150.050.050.05V
10/0<1100.050.050.0515/0
<1150.050.05
0.05
V IH
High Level Input Voltage 0.5/4.5<15444V
1/9<1108881.5/13.5<11512
12
12
V IL
Low Level Input Voltage 4.5/0.5<15111V
9/1<11022213.5/1.5<1153
3
3
I OH
Output Drive Current
0/5 2.5<15-1.25-6.4-0.42-0.42mA
0/5 4.6<15-0.51-1.6-0.38-0.380/109.5<110-1.25-3.6-1-10/1513.5<115-3.75-12-3-3I OL
Output Sink Current
0/50.4<15 3.2 6.4 2.6 2.6mA 0/100.5<110816 6.6 6.60/15 1.5<1
1524
4819
19
I I Input Leakage Current
0/18
Any Input 18
±10-5±0.1±1
±1
μA C I
Input Capacitance
Any Input
5
7.5
pF
HCF4049UB
4/9
DYNAMIC ELECTRICAL CHARACTERISTICS (T amb =25°C,C L =50pF,R L =200K ?,t r =t f =20ns)
(*)Typical temperature coefficient for all V DD value is 0.3%/°C.
TEST CIRCUIT
L R L =200K ?
R T =Z OUT of pulse generator (typically 50?)
Symbol Parameter
Test Condition
Value (*)Unit
V DD (V)V I (V)Min.
Typ.Max.t TLH
Output Transition Time
5580160ns 1010408015153060t THL
Output Transition Time
553060ns
1010204015151530t PLH
Propagation Delay Time
5560120ns
101032655104590151525505154590t PHL
Propagation Delay Time
553265ns
101020405101530151515305
15
10
20
HCF4049UB
5/9
WAVEFORM:PROPAGATION DELAY TIMES (f=1MHz;50%duty
cycle)
HCF4049UB Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
All other names are the property of their respective owners
? 2004 STMicroelectronics - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.
https://www.wendangku.net/doc/4b11070530.html,
9/9