当前位置：文档库 › 国际会议论文格式

国际会议论文格式

国际会议论文摘要post样版

on Agriculture and Environment 2012 1 Yuji KAMIYA RIKEN Plant Science Center Abstract:The phytohormone auxin plays critical roles in the regulation of plant growth and development. Indole-3-acetic acid (IAA) has been recognized as the major auxin for more than 70 years. Although several pathways have been proposed, how auxin is synthesized in plants is still unclear. Previous genetic and enzymatic studies demonstrated that both TRYPTOPHAN AMINOTRANSFERASE OF ARABIDOPSIS (TAA) and YUCCA (YUC) flavin monooxygenase-like proteins are required for biosynthesis of IAA during plant de- velopment, but these enzymes were placed in two independent pathways. Recently, we demonstrate that the TAA family produces indole-3-pyruvic acid (IPA) and the YUC family functions in the conversion of IPA to IAA in Arabidopsis (Arabidopsis thaliana) by a quantification method of IPA using liquid chromatography–electrospray ionization–tandem MS. We further show that YUC protein expressed in Escherichia coli shows faint yellow color suggesting the presence of FMD and directly converts IPA to IAA. Indole-3-acetaldehyde is probably not a precursor of IAA in the IPA pathway. Our results indicate that YUC proteins catalyze a rate-limiting step of the IPA pathway, which is the main IAA biosynthesis pathway in Arabidopsis. Although 2,4-D and other synthetic auxins were used in agriculture to increase crop production, specific inhibitors and promoters of IAA biosynthesis were not well studied. Our identification of the two specific enzymes for IAA biosynthesis may give us new approach to increase crop production by regulating auxin biosynthesis. Yuji Kamiya is a Group Director of the RIKEN Plant Science Center. He received Degree in agricultural chemistry from the University of Tokyo in 1975. He joined the Pesticide Synthesis Laboratory at RIKEN in 1975. From 1980 to 1982 he studied on gibberellins biosynthesis at the Institute of Plant Physiology, University of G?ttingen, as an Alexander von Humboldt Fellow. Since that time on he has continued to study gibberellins biosynthesis and its regulation. He was appointed as the Head of the Laboratory for Plant Hormone Function of the RIKEN Frontier Research Program from 1991 to 1998. In 2000, he joined the Plant Science Center as the Head of the Laboratory of Cellular Growth Development and in October 2000 he was promoted to the position of Group Director. Main Activities: Research on regulation of plant hormone biosynthesis Cloning and characterization of enzymes involved in hormone biosynthesis Screening of chemical proves to increase plant biomass production.

第十四届世界地震工程国际会议论文集6

STRONG MOTION DISTRIBUTION AND MICROTREMOR OBSERVATION FOLLOWING THE 21 MAY 2003 BOUMERDES, ALGERIA EARTHQUAKE A. Meslem1, F. Yamazaki1, Y. Maruyama1, D. Benouar2, N. Laouami3 1 Department of Urban Environment Systems, Graduate School of Engineering, Chiba University, Japan 2 Faculty of Civil Engineering, University of Bab-Ezzouar, Algiers, Algeria 3CGS, National Center of Applied Research in Earthquake Engineering, Algiers, Algeria Email: meslem@graduate.chiba-u.jp ABSTRACT: Detailed analysis was conducted for the recorded mainshock across the country during the 21 May 2003 Boumerdes, Algeria earthquake. A remarkable difference has been recorded between neighbour stations. Since local site conditions have a significant effect on the ground motions, and hence on the damage distribution caused by the earthquake, microtremor survey was conducted at several sites of seismic observation stations. In this study, a particular attention is paid to 4 seismic network stations located in the most affected area between Algiers and Boumerdes provinces. Using the microtremor records and the strong motion records from five stations, the effect of soil condition on seismic motion is investigated and the damage distribution caused by this event is explained. The results from this study show that in some stations, the recorded high PGA values were influenced by high-frequency contents. However, in other stations, soil amplification is considered to be responsible for high PGV v alues. Hence, in order to conduct a further engineering and seismological study, it is highly recommended to conduct an investigation to identify the local soil profile at the seismic stations. KEYWORDS: the 2003 Boumerdes earthquake, ground motion, microtremor, damage distribution 1. INTRODUCTION On May 21, 2003, a destructive Mw=6.8 earthquake hit the northern part of Algeria, causing a huge structural and non-structural damages and human casualties. The last report by the Algerian ministers’ council (December 12, 2003) deplores that 2,278 deaths and 11,450 injured were claimed by the earthquake. The number of homeless was counted as 250,000, corresponding to 40,000 families. As for the building damage, 17,000 units were demolished and 116,000 were repaired. The resulted direct economic loss was estimated to be 5 billion US dollars (Ousalem and Bechtoula, 2005). The earthquake was felt inside a 250 km radius zone from the epicenter (Laouami et al., 2006) and provoked the occurrence of liquefaction in the epicentral area. An uplift of coastal line was marked with the average of 0.55m (Harbi et al., 2007; Bouhadad et al., 2004; Meghraoui et al., 2004). In the European side of Mediterranean Sea, tsunamis of about 1.5m high were recorded along the coast of Spain (Alasset et al., 2006). Soon after the event, several international organizations located the 21 May 2003 Boumerdes earthquake. The location given by the Algerian Research Center of Astronomy Astrophysics and Geophysics (CRAAG) was 36.91N, 3.58E. However, the mainshock was relocated at 36.83N, 3.65E with the focal depth of 10 km (Bounif et al., 2004). The acceleration records of the mainshock were recorded by a number of accelerographs, deployed by the Algerian National Research Center of Earthquake Engineering (CGS). However, several technical problems have occurred during recording the mainshock. The number of free field seismic stations which recorded the mainshock, especially in the severely affected areas, is not sufficient for estimating a detailed strong motion

会议论文模板

附件1 会议论文模板会议论文 1、论文征稿范围（1）肉品科学基础；（2）肉品药物残留分析技术；（3）肉类生产可追溯体系及保障技术；（4）肉品清洁生产、保鲜及贮运技术；（5）肉品安全法律、法规、标准；（6）传统肉制品加工、现代化装备与质量控制技术；（7）肉品加工副产物综合利用；（8）肉品加工机械、包装新技术；（9）肉品分级、品质检验、风味分析；（10）肉品添加剂开发与应用；（11）肉品营养与人类健康；（12）肉品工业发展政策与新举措；（13）基因与肉类品质；（14）饲养与肉类品质。 2、论文格式与要求（1）论文内容未公开发表或未投稿，一般不接受综述文章；（2）具体撰写格式请参照以下“投稿论文模板”；（3）论文一般不超过6页；（4）9月15日前发送至会务组邮箱（meatacsy@https://www.wendangku.net/doc/4a2417887.html,）。

投稿论文模板模板使用方法： 1.在Windows操作系统中，直接双击本模板文件，作者可以输入稿件。如果作者想将稿件直接输入模板中，请选中你想代替的文字，然后开始输入稿件内容(例如，选中“标题” 部分输入你自己的标题)。 2.投稿时请使用通栏，不必分两栏，分栏工作由排版人员完成。 3. 如果已有稿件Word文档，则可以拷贝、粘贴稿件内容到本模板。 4. 请确认稿件内容格式无误后，删除所有不需要的部分，包括说明部分（红色字体部分）和修改痕迹。 5. 保存文件：选择“文件→另存为”为Word文档文件(.doc)。总则： 1. 文中所有的中文都使用“宋体”字体；所有的英文和数字都使用“Times New Roman”字体，包括标题、图、表、参考文献等。 2. 中英文表述中，数值和单位之间间隔1/4中文字宽度的空格。题目宋体小一、居中、加粗、无缩略语第一作者姓名1，作者二姓名2，通信作者姓名1,* (宋，10.5号，如果第一作者不是联系人，请在通信联系人右上角标注*；两个字的作者名字间空一格；外籍作者用英文全名，不能缩写，并尊重该国姓名表达习惯，少数民族作者姓名按其民族习惯著录姓名。不同工作单位的作者姓名右上角加注数字序号。如果所有的作者都在同一个单位，则不需对作者编号。） (1.作者单位正式对外名称，省份城市邮编；2.作者单位正式对外名称，省份城市邮编)宋体9号（作者的工作单位，均应包括单位全称(大学原则上标注到具体的学院)、所在省市名及邮政编码，单位名称与省市之间应以逗号“，”分隔，整个单位信息项用圆括号“( )”括起。多作者的工作单位名称之前加与作者姓名序号相同的数字序号，单位编号应按在文中的出现顺序依次排号，各工作单位之间连排时以分号“；”分隔。）摘要：宋体9号，摘要中首次出现的英文缩写名，不能直接用英文缩写形式，需用“中文名(英文全名，点击03版WORD的“插入”或07版WORD的“引用”工具，用其中的“插入脚注”按钮插入短横线。以下字体为9号、中文宋体，英文、数字用“Times New Roman”字体。基金项目指文章产出的资助背景，项目名称应按国家有关部门规定的正式名称填写；多项基金项目应依次列出，其间分号“；”分隔。项目后给出编号，编号用()括起。例：基金项目：国家自然科学基金青年科学基金项目(30471225)；“十二五”国家科技支撑计划项目(项目编号)；国家高技术研究发展计划（863计划）项目(项目编号) 作者简介：姓名(出生年—)，性别，职称(如果有)，学位或学历(尽量写学位)，研究方向为×××。E-mail：×××(只标注一个常用的电子邮箱) *通信作者：姓名(出生年—)，性别，职称(如果有)，学位或学历(尽量写学位)，研究方向为×××。E-mail：×××(只标注一个常用的电子邮箱) 只刊登一位第一作者、通信作者(如果有通信作者)简介。

EI国际会议模板(TTP)

Your Paper's Title Starts Here: Please Center Sanfeng Zhang1, a, Hulan Liu2, b and Dada Xi2, c 1School of xxx, xxx University, Guangzhou 510000, China; 2School of yyy, zzz University, Guangzhou 510000, China. a zzz@https://www.wendangku.net/doc/4a2417887.html,, b xxx@https://www.wendangku.net/doc/4a2417887.html,, c yyyy@https://www.wendangku.net/doc/4a2417887.html, Keywords: List the, keywords covered, in your paper. Abstract. This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). Introduction All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Should authors use tables or figures from other Publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper. Use italic for emphasizing a word or phrase. Do not uses boldface typing or capital letters except for section headings (cf. remarks on section headings, below). Do not number your paper: All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Organization of the Text Section Headings. The section headings are in boldface capital and lowercase letters. Second level headings are typed as part of the succeeding paragraph (like the subsection heading of this paragraph). All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. When receiving the paper, we assume that the corresponding authors grant us the copyright to use. Page Numbers. Do not number your paper: All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Should authors use tables or figures from other Publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper. Use italic for emphasizing a word or phrase. Do not use boldface typing or capital letters except for section headings (cf. remarks on section headings, below). c2 = a2 + b2. (1)

国际会议论文格式要求

国际会议论文格式要求： Author Guidelines for 8.5 x 11-inch Proceedings Manuscripts Author(s) Name(s) Author Affiliation(s) E-mail Abstract The abstract is to be in fully-justified italicized text, at the top of the left-hand column as it is here, below the auth or information. Use the word “Abstract” as the title, in 12-point Times, boldface type, centered relative to the column, initially capitalized. The abstract is to be in 10-point, single-spaced type, and up to 150 words in length. Leave two blank lines after the abstract, then begin the main text. 1. Introduction All manuscripts must be in English. These guidelines include complete descriptions of the fonts, spacing, and related information for producing your proceedings manuscripts. Please follow them and if you have any questions, direct them to the production editor in charge of your proceedings at the IEEE Computer Society Press: Phone (714) 821-8380 or Fax (714) 761-1784. 2. Formatting your paper All printed material, including text, illustrations, and charts, must be kept within a print area of 6-1/2 inches (16.51 cm) wide by 8-7/8 inches (22.51 cm) high. Do not write or print anything outside the print area. All text must be in a two-column format. Columns are to be 3-1/16 inches (7.85 cm) wide, with a 3/8 inch (0.81 cm) space between them. Text must be fully justified. A format sheet with the margins and placement guides is available as both Word and PDF files as and . It contains lines and boxes showing the margins and print areas. If you hold it and your printed page up to the light, you can easily check your margins to see if your print area fits within the space allowed. 3. Main title The main title (on the first page) should begin 1-3/8 inches (3.49 cm) from the top edge of the page, centered, and in Times 14-point, boldface type. Capitalize the first letter of nouns, pronouns, verbs, adjectives, and adverbs; do not capitalize articles, coordinate conjunctions, or prepositions (unless the title begins with such a word). Leave two 12-point blank lines after the title. 4. Author name(s) and affiliation(s) Author names and affiliations are to be centered beneath the title and printed in Times 12-point, non-boldface type. Multiple authors may be shown in a two- or three-column format, with their affiliations italicized and centered below their respective names. Include e-mail addresses if possible. Author information should be followed by two 12-point blank lines. 5. Second and following pages The second and following pages should begin 1.0 inch (2.54 cm) from the top edge. On all pages, the bottom margin should be 1-1/8 inches (2.86 cm) from the bottom edge of the page for 8.5 x 11-inch paper; for A4 paper, approximately 1-5/8 inches (4.13 cm) from the bottom edge of the page. 6. Type-style and fonts Wherever Times is specified, Times Roman or Times New Roman may be used. If neither is available on your word processor, please use the font closest in

(EI会议,EI国际会议)所有学术论文权威性等级详解(超详细!经典!)

一提到发表学术论文，您脑中一定冒出许多期刊名称的概念，但是期刊也有级别之分，所以文章的档次也有三六九等。那么如何在浩如烟海的众多论文中合理为每篇论文划分等级，则成为一个非常重要的事情。举个例子，请回答以下几个问题。 1 EI会议论文和国内中文核心论文，哪个更加权威？ 2 国内中文核心论文和南大核心论文，哪个更加权威？ 3 只要是SCI论文，其文章质量一定比EI高吗？如果你不懂文章的等级划分，那么以上问题也许回答比较困难，下面就一一为您剖析。首先谈谈SCI级别的论文，当然SCI在全球范围内属于最权威的论文，尤其是国际上比较出名的《自然》和《科学》杂志，上面的论文很多都具备获取罗贝尔奖的资格，并且这类论文审稿周期很长，专家审查很严格，对英文要求也比较高，所以可想而知，这类论文等级是最高的。其次谈谈EI级别论文，EI也被称为全球核心，听名字貌似很高大上，但是要注意，EI有两种论文，一种是期刊论文（即JA），即EI源刊，一种是会议论文（即CA），也是我们经常说的EI会议论文。这两种论文级别可不是一样的，EI的JA级别要比CA高。同时还要注意，EI源刊有国内的，也有国外的，也有国内EI会议，国际EI会议之分，一般国内排在前面的EI源刊论文其级别完全不亚于SCI级别论文，这一点很重要。再次谈谈国内的中文核心和南大核心，首先中文核心=北大核心，在国内目前算是最权威的学术论文，但是这并不是说南大核心就比中文核心第一个档次，其实这两者无法单一横向比较，因为中文核心大多收录自然科学类的论文，南大核心主要收录社会科学类论文，所以硬要比较这两者的话，只能说两者等级差不多。还有说明一点，一般中文核心还是比那种比较水的EI会议等级要高的。再谈谈国内的其它核心，如科技核心，这类文章质量一般，有些也是很水的，但是科技核心比普刊等级要高，因为比较科技核心也算是“核心” 最后谈谈中文核心和南大核心的增刊，可以这么说，如果是增刊，那么基本上文章档次很低了，和普刊差不多，大多数增刊都是给钱就发的类型。所以综上分析得出权威性结论：顶级SCI源刊>中等SCI源刊>国内顶级EI源刊>低等SCI源刊>国内外一般EI源刊>国内顶级中文核心或者南大核心>一般EI会议>国内一般中文核心和南大核心>科技核心和一般行业核心>普刊和增刊当然以上不等式只是定性将权威性划分了下，因为每个级别的文章本身行业内又会有顶级、一般和垃圾三个级别（根据影响因子不同而划分），所以都不能够太绝对化。如果搞不清楚可以进这里问问：https://www.wendangku.net/doc/4a2417887.html,（复制访问），里面专做EI会议的，可以从EI会议作为分界点，横向比较其它论文等级与该分界点权威差值，从而判断两个论文的等级差别。希望这篇文章能够帮助到各位从事学术行业的朋友们！

关于国际会议论文精选3篇

关于国际会议论文精选3篇大家上午好!今天我汇报的主题是：基于改进型LBP算法的运动目标检测系统。运动目标检测技术能降低视频监控的人力成本，提高监控效率，同时也是运动目标提取、跟踪及识别算法的基础。图像信号具有数据量大，实时性要求高等特征。随着算法的复杂度和图像清晰度的提高，需要的处理速度也越来越高。幸运的是，图像处理的固有特性是并行的，尤其是低层和中间层算法。这一特性使这些算法，比较容易在FPGA等并行运算器件上实现，今天汇报的主题就是关于改进型LBP算法在硬件上的实现。 good morning everyone. My report is about a Motion Detection System Based on Improved LBP Operator. Automatic motion detection can reduce the human cost of video surveillance and improve efficiency [?'f??(?)ns?]，it is also the fundament of object extraction, tracking and recognition [rek?g'n??(?)n]. In this work, efforts ['ef?ts] were made to establish the background model which is resistance to the variation of illumination. And our video surveillance system was realized on a FPGA based platform. PPT(2) 目前，常用的运动目标检测算法有背景差分法、帧间差分法等。帧间差分法的基本原理是将相邻两帧图像的对应像素点的灰度值进

如何判断国际会议论文是否被EI收录

★如何判断国际会议论文是否被EI收录？如何判断国际会议论文是否被EI收录？可能会遇到这样的情况，有些国际会议说明了EI收录，可到最后却并未收录，让人郁闷至极。那么如何判断一个国际会议是否会被EI收录呢？除了看这个会议以往的被收录情况外，还有以下几个小经验：一、看会议论文的出版单位会议EI收录其实与主办方关系很小，甚至没有任何关系，第一要素主要取决于会议论文的出版单位，根据多年经验，特列举全球著名出版单位如下： 1.德国斯普林格出版社（SPRINGER）：100%EI收录； 2.美国机械工程学会出版社（ASME）：100%EI收录； 3.美国土木工程学会出版社（ASCE）：100%EI收录； 4.美国电子电气工程计算机学会出版社（IEEE CS）：99%EI收录； 5.美国电子电气工程出版社（IEEE）：90%EI收录； 6.英国工程技术出版社（IET）：90%EI收录； 7.法国Atlantis Press：70%。二、考察会议主席的诚信度 1.国际一级学会发起：如IFAC、IEEE等。如果IEEE发起的会议IEEE要占51%的注册费，因此，该类会议注册费均在500美元以上。请注意中国2007年只有一个是IEEE发起的，即ICMA2007，其他均不是，2008年至今中国没有一个会议是IEEE发起； 2.国家一级学会发起：如中国计算机学会、中国自动化学会、中国通讯学会等，如WCICA、CCC等； 3.各大学校级领导：中国大学校级领导作为主席办国际会议具有中国特色（如ICTE等）； 4.国际一级学会技术支持：如IEEE CS、IEEE、IET、ASME、ASCE等。如ICIC、ICNC； 5.其他学者。