WSH-600DC95SA中文资料
COMMUNICATIONS MODULES &SUBSYSTEMS
Key Features
?Reach extension for power- and dispersion-limited OC-192/STM-64 links
? 3R operation with jitter rejection ? High transmit power (+2 dBm)
? Excellent receiver sensitivity (-24 dBm minimum)? Extended dispersion tolerance to 80 km at OC-192? Convection cooled;no fans required
The WaveShifter 600 ER is a rugged optical regenerator that extends the reach of SONET OC-192 or 10-Gigabit Ethernet wide-area network (WAN) data by up to 80 km on standard single-mode fiber (SMF).
A versatile reach-extender,the WaveShifter 600 ER can be used as an in-line regenerator for power,dispersion,or jitter-limited transmission applications.With its high-sensitivity receiver,incoming 10 Gb/s signals are reshaped,retimed,and regenerated (3R),and retransmitted at high output power.
The WaveShifter 600 ER converts any 1310 nm or 1550 nm optical input to a long-reach 1550 nm C-band output compatible with erbium doped fiber amplifiers (EDFA) such as the LightAmp and BrightAmp series of network-ready optical amplifiers.The WaveShifter 600 ER is also compatible with dual 1310/1550 and ruggedized wavelength division multiplexing (WDM) products,enabling wavelength overlays with 1310 nm intermediate and long-reach equipment.The W aveShifter 600 ER is ready to deploy out of the box into any W aveReady? 3500shelf and can be provisioned in minutes for a wide range of network applications.
Applications
?SONET reach extension of loss and dispersion-limited links
?1310/1550 WDM overlay with existing 1310 nm transmission equipment
Compliance
?Telcordia NEBS level 3
?GR-253-CORE,Issue 3,sections 4.1(Physical Layer Classifications),5.6.1(Jitter for Regenerators),and 7(Other Generic Criteria)?UL 60950 Third Edition
?CAN/CSA C22.2 No.60950 00Third Edition ?FCC Class A
Unidirectional OC-192 Optical Regenerator WaveShifter 600 ER
2
Parameter1Minimum Typical Maximum Optical Characteristics
Input and output wavelength
Input wavelength,port A1280 nm-1600 nm
Output wavelength,port B1530 nm-1560 nm
-12
Input overload power at BER=10-12---6 dBm Maximum dispersion @ 1550 nm 2 dB path penalty--1600 ps/nm
-12
Differential group delay (DGDmax) @ 1 dB path penalty--30 ps
Eye mask Per GR-253-CORE
Jitter (generation,tolerance,transfer) Meets GR-253/ITU-T G.98 and ANSI X3.230-1994 DC supply voltage--48 V-
Alarm relay signals Dry contact major and minor alarms,
Relay open under normal operation.Relay closed
when power is off.Major (MAJ),Minor (MIN) Size (H x W x L) 6 x 2.2 x 8.5 inch (15.24 x 5.58 x 21.59 cm) Environmental Characteristics
Storage temperature-40 °C-85 °C Interface Characteristics
Front panel Four LEDs:CARD (power),MAJ (major alarm),
MIN (minor alarm),LOS A (loss of input signal)
Note:This product should be deployed in accordance with your company’s deployment directives.
1.All specifications are guaranteed over the life,operating temperatures,wavelength range,and input voltage specified.
Telcordia is a registered trademark of Telcordia Technologies Incorporated.
All statements,technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate.However,the accuracy or completeness thereof is not guaranteed,and no responsibility is assumed for any inaccuracies.The user assumes all risks and liability whatsoever in connection with the use of a product or its application.JDSU reserves the right to change at any time without notice the design,specifications,function,fit or form of its products described herein,includ-ing withdrawal at any time of a product offered for sale herein.JDSU makes no representations that the products herein are free from any intellectual property claims of others.Please contact JDSU for more information.JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation.Other trademarks are the property of their respective holders.?2006 JDS Uniphase Corporation.All rights reserved.10143134 Rev.001 03/06 WSH600ER.DS.CMS.AE