Features
For IF SAW filter
High attenuation
Single-ended operation
Dual In-line Package
RoHS compliant (2002/95/EC), Pb-free
Specifications
Parameter Unit Minimum Typical Maximum Center Frequency MHz 89.9 90 90.1
Insertion Loss dB - 25.7 27
3 dB Bandwidth MHz 16 16.12 -
Passband Variation dB - 0.7 1.2
Absolute Delay usec - 3.63 4 f0±8.45MHz dB 35 44 -
f0±8.65MHz dB 45 57 -
f0±9.05MHz dB 50 55 - Ultimate Rejection
f0±13.05MHz dB 55 60 -
f0±15MHz dB 55 60 - Material Temperature coefficient KHz/°C -8.46
Substrate Material - YZ LN
Ambient Temperature °C 25
Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V 0
Input Power dBm - - 10
ESD Class - 1
Package Size DIP3512 (35.0x12.8x4.7mm3)
Notes:
1. All specifications are based on the test circuit shown;
2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room
temperature;
3. Electrical margin has been built into the design to account for the variations due to temperature drift and
manufacturing tolerances;
4. This is the optimum impedance in order to achieve the performance show.
Tel: +86-23-62808818 Fax: +86-23-62808382
Tel: +86-23-62808818 Fax: +86-23-62808382
Tel: +86-23-62808818 Fax: +86-23-62808382