APL-sample 应用物理快报投稿模板

Sample manuscript for Applied Physics Letters

A. Author,1,2,a)

B. Author,2,b,c) and

C. Author3,c)

1Department, University, City, Postal code, Country

2Corporation or Laboratory, Street address, Postal code, City, Country

33Department, University, City, State (spell out full name), Zip code, USA

This is an abstract. It gives the reader an overview of the manuscript. Abstracts are required for all manuscripts. The Abstract should be self-contained (contain no footnotes or citations to references). It should be adequate as an index (giving all subjects, major and minor, about which new information is given), and as a summary (giving the conclusions and all results of general interest in the article). It should be approximately 250 words. The abstract should be written as one paragraph and should not contain displayed mathematical equations or tabular material. In this sample article we provide instructions on how to prepare and submit your paper to Applied Physic Letters, a journal published by AIP Publishing LLC. The AIP Publishing staff appreciates your effort to follow our style when preparing your manuscript.

NB: Contrary to the structure of this sample, headings are not permitted in APL. They are used in this sample to assist the reader in locating information.

THE MANUSCRIPT

Please use this ―sample manuscript‖ as a guide for preparing your article. This will ensure that your submission will be in the required format for Peer Review. Please read all of the following manuscript preparation instructions carefully and in their entirety. The manuscript must be in good scientific American English; this is the author's responsibility. All files will be submitted through our online electronic submission system at https://www.wendangku.net/doc/5b636782.html,.

Manuscript preparation

Articles can be prepared as either a Microsoft Word .doc/.docx file or a REVTeX/LaTeX file. The entire manuscript, should be set up for 21.6 × 28 cm (8-1/2 × 11 in. or A4) pages with 2.54 cm (1 in.) margins all the way around. The font and

_____________________________

Note: This is an example of a footnote to the title if the paper was part of a conference: Contributed paper, published as part of the Proceedings of the 17th International Conference on Physics, Anytown, State, May 2010.

a)This is an example of a footnote to an author’s name: Author to whom correspondence should be addressed. Electronic mail: author@https://www.wendangku.net/doc/5b636782.html,.

b) This research was performed while B. Author was at Anywhere National Laboratory, City, State, Postal code, Country.

the point size will be reset according to the journal’s specs, but authors m ost commonly use the Times Roman font and point size 12. The manuscript begins with a title, names of all authors and their affiliations, and an abstract, followed by the body of the paper, tables and figures, if any, included, and the reference section. Consecutively number all tables (I, II, III, etc.) and figures (1, 2, 3, etc.), including those in an Appendix. Figures, with figure captions, may be embedded within the manuscript to assist the reviewers. Number all pages consecutively, beginning with 1.

Manuscript submission

All files will be submitted through the online system:https://www.wendangku.net/doc/5b636782.html,/. Each version of the manuscript (the original and subsequent revisions) should be submitted with its own complete set of files: a cover letter (indicating the title, authors, and contact information), a complete article file, and separate figure files (see Sec. I X―FIGURES). When uploading a revised manuscript, also include a response/rebuttal letter (indicating the changes made to address the Editor’s and Reviewers’ comments).

MANUSCRIPT LENGTH

Manuscripts should not exceed 3500 words.

TeX users

Authors are advised to use the REVTeX 4.1 file. If the double-column version of the manuscript obtained using the "reprint" option fits on four pages, the length is acceptable.

Word users

Please note that the abstract, title, author list, references, and acknowledgments are all excluded from the 3500-word limit. Figures, tables, and equations, however, are included and must be accounted for by calculating a word count equivalent to the space they occupy.

Highlight the manuscript text, excluding abstract, author list, acknowledgements and references, and note the word count at the bottom of the screen. Add to that the word-count-equivalents for figures, tables and equations as follows: ?Figures: 200 words for an average figure.

?Tables: 13 words per line, plus 26 words.

?Equations: 13 words per line.

If the total number of words (text + figures + tables + equations) is 3500 or less, the length is acceptable.

TITLE

The title of a paper should be as concise as possible but informative enough to facilitate information retrieval. Acronyms are not allowed in the title; they must be spelled out (exception to this rule is DNA). Chemical compounds are allowed in the title.

AUTHORS’ NAMES AND ADDRESSES

Authors’ n ames should preferably be written in a standard form for all publications to facilitate indexing and to avoid ambiguities. Include the names and postal addresses of all institutions, followed by city, state, zip code, and USA if in the United States or by postal code, city, and country if not in the U.S. Please provide the complete address for each author. See the byline of this sample article for examples.

Authors with Chinese, Japanese, or Korean names may choose to have their names published in their own language alongside the English versions of their names in the author list of their publications. For Chinese, authors may use either Simplified or Traditional characters. Chinese, Japanese, or Korean characters must be included within the author list of the manuscript when submitting or resubmitting. The manuscript must be prepared using Microsoft Word or using the CJK LaTeX package. Specific guidelines are given here.

FOOTNOTES

Footnotes are generally unacceptable in Applied Physics Letters, with the exception of footnotes to the title and the author’s names. Footnotes to the title should be set as a Note above the byline footnotes. All other footnotes should be converted to text or should be included in the reference section. Use a), b), c), etc., for footnotes to authors. The following list shows some examples:

Note: Contributed paper, published as part of the Proceedings of the 17th International Conference on Physics, Anytown, State, January 2011.

a)A. Author and B. Author contributed equally to this work.

b)This research was performed while C. Author was at Anywhere National Laboratory, City, State, Postal code, Country.

c)This is an example of a footnote to an author’s name: Author to whom correspondence should be addressed. Electronic mail: author@https://www.wendangku.net/doc/5b636782.html,.

HEADINGS

Headings are not permitted in Applied Physics Letters.

EQUATIONS

Equationsneed to be editable so we recommend that you create them with the built-in Microsoft? Equation Editor included with your version of Word. If you wish to use Mathtype, check for compatibility at https://www.wendangku.net/doc/5b636782.html,/lzny753.

o Users of the Windows version of Word: Please embed all fonts.

o Users of Macintosh Word: Please save all files in DOCX format, as the use of DOC is not supported.

Additionally, because font embedding is not possible, Mac Word users should limit their font selection to

()?

??? ??-=T

k E T c d

B

exp .

(4)

Equation numbering

Equations are numbered consecutively through the entire paper as simply (1), (2), (3).... In appendixes, the numbering starts over as (A1), (A2), (A3). If there is more than one appendix, use (A1), (A2), etc. for equations in Appendix A; (B1), (B2), etc., for equations in Appendix B.

When a numbered equation has more than one part and that (those) part(s) consecutively follow, then they are indicated as follows:

(21) (22a) (22b) (22c)

If, however, they do not follow consecutively, primes are used: (21) (22a)

(22b)

(21')

(21'')

presentation. Choose CMYK (cyan, magenta, yellow, black) for any figure that will appear in color in the print version.

submitted at 600 dpi for the best presentation. Choose RGB (red, green, blue) for any figure that will appear in color only online.

FIG. 3. This is a good example of information that was presented clearly. When this figure appeared in the printed journal it was in black and white print, but the reader was able to discern the ―red‖ triangles, the closed ―green‖ circles, and the open ―black‖ cir cles. A description as well as the co lor is needed. If the caption had simply discussed ―the red and green symbols,‖ the reader of the print version would not

understand because he/she would be seeing the figure without the color.

FIG. 4. This is an example of line art. Figures should be created at 600 dpi and submitted at 600 dpi for the best presentation. Save line art as black/white bitmap, not grayscale.

.

FIG. 5. This is an example of a halftone. Figures should be created at 265 dpi and submitted at 265 dpi for the best presentation.

the best presentation.

TABLE I.This table provides instructions on how to prepare figures.

(a) General guidelines for preparing illustrations

?Number figures in the order in which they appear in the text.

?Label all figure parts with (a), (b), etc. Each figure file should contain all parts of the figure. For example, if Fig.1 contains three parts [(a), (b), and (c)], then all parts should be combined in a single file for Fig. 1.

?Avoid any large disparity in size of lettering and labels used within one illustration.

?Prepare illustrations in the final published size, not oversized. The maximum published width for a one-column illustration is 8.5 cm (3-3/8 in.). The maximum width for a two-column figure is 17 cm (7.0 in.).

?In cases where reduction is required, avoid small open symbols that tend to fill in and avoid small lettering; ensure that, in the final published illustration, there is a minimum of 8-point type size (2.8 mm high; 1/8 in. high) for lettering and 0.5-point width for lines.

?Ensure that lettering and lines are dark enough, and thick enough, to reproduce clearly. Remember that fine lines tend to disappear upon reduction.

?It is preferred that authors embed figures and captions in the manuscript file. Embed the figures in the approximate position and size you think is appropriate.

? In addition, separate figure files must be provided (see below for accepted file formats) along with the manuscript.

(b) Guidelines for preparation of electronic graphics files

?Acceptable formats for figures: Portable Document Files (PDF), Encapsulated PostScript Files (EPS), PostScript, or Tagged Image File (TIF), and JPEG (.jpg) Microsoft Word files are not acceptable.

?More detailed information is given about figure preparation on the website in the Preparing Graphics instructions.

?Settings: Set the graphic for 600 dpi resolution for line art, 265 dpi for halftones, and 600 dpi for combinations (line art + halftone).

?Save line art as black/white bitmap, not grayscale.

?Save halftones and combinations as grayscale, not black/white bitmap.

?Click the link to ―Publication Charges & Open Access Fees‖ on the About tab for publication charge information.

?Submit color files at 300 dpi in one of the accepted file formats: PDF, EPS, PS, or TIF. No other type of color illustration is acceptable. When selecting a file mode, for print choose CMYK (cyan, magenta, yellow, black)and for color online choose RGB (red, green, blue).

?PDF files should be vector files.

?In the PDF illustration, resolution of any shaded or photographic images must be 600 pixels per inch (PPI). ?Within the PDF illustration, resolution of line art with no shading should be 1200 pixels per inch (PPI).

?All fonts must be embedded in the PDF.

?Select "High Quality Print" when creating a PDF through the application’s print command.

?If usable color graphics files are received in time for the production process, authors will see color versions of those illustrations when viewing their author proofs. (The Corresponding Author will receive e-mail notification from AIP Publishing when the proof, as a PDF file, is available for downloading.)

?The author is responsible for obtaining permission to reuse previously published material. Full credit lines are needed for figures that are used with permission. An example of the recommended format for crediting material from a journal article is: ―Reprinted with permission from [FULL CITATION]. Copyright [PUBLICATION YEAR], [PUBLISHER NAME].‖ Full citation format is as follows: Author names, journal title, Vol. #, Issue #, Page # (or CID#), Year of publ ication. For example, the credit line would appear as: ―Reprinted

TABLES

Separate tables (numbered with Roman numerals in the order of their appearance in the text) should be used for all tabular material. Tables must be embedded in the article file, not uploaded like figure files. The structure should be clear. Use simple column headings and include units of measure. Table captions are positioned above the table and should be styled as ―TABLE I. This is a table caption.‖ A caption should make its table intelligible without reference to the text. Capitalize the first word in the table headings and subheadings. References within tables are designated by lowercase Roman letter superscripts and given at the end of the table. Unaltered computer output and notation should be uploaded as supplementary files. See Table II for an example of correct table styling.

TABLE II. Bond distances for alkene molecules (atomic units).

No. C a RI,I+1b SRI,I+1c RI?1,I+RI,I+1SRI?1,I+RI,I+1

2 2.5255 ………

4 2.617

5 0.123 5.30

6 …

6 2.6314 0.0999 5.3025 0.0112

8 2.6368 0.0876 5.3009 0.0111

10 2.6396 0.0795 5.2999 0.0106

14 2.6424 0.0689 5.2989 0.0096

18 2.6437 0.0623 5.2982 0.0088

22 2.6443 0.0573 5.2973 0.008

26 2.6448 0.0536 5.2968 0.0074

b RI,I+1 is the distance between two neighboring carbon atoms, while ?RI,I+1?is the average

of RI,I+1 for a given molecule.

c SRI,I+1 is the standar

d deviation of RI,I+1 within th

e given molecule.

MULTIMEDIA SUBMISSIONS

Multimedia files can be included in the online version of published papers. All such files are peer reviewed. When published, these files can be viewed by clicking on a link from the figure caption, provided that the reader has a video player installed, such as Windows Media PlayerTM, Quick Time PlayerTM, or RealOne PlayerTM. Please clickon Supporting Data in our Author Resource Center. Please note the following important information when preparing your manuscript:

?When incorporating multimedia, note that the paper should be written so that the printed version can be understood on its own.

?Submit all multimedia files initially with the manuscript.

?Treat all multimedia files as figures numbered in sequence as they are referred to in text.

For each multimedia file, provide a figure, which is a static representation of the multimedia file. Also provide an accompanying caption. At the end of the caption, include the phrase, "(multimedia view)."

Video and other enhanced files should be in a format that the majority of readers can view without too much difficulty. Please click on Supporting Data in our Author Resource Center for specific submission requirements.

SUPPLEMENTARY MATERIAL

Text material that may not be of interest to all readers, long data tables, multimedia, and computer programs may be deposited as supplementary materials.Present supplementary material within its own section before the Acknowledgments as shown in the example below. AIP Publishing will insert the hyperlink to bring the reader to the files.

All in-text citations of the supplementary material will link to that section. Be sure to include the phrase ―supplementary material‖ when describing it in text, as shown in the example below.

All supplementary material is posted online exactly as provided by the author. AIP Publishing makes no changes to the supplementary material files, including text editing or file conversion.

ACKNOWLEDGMENTS

Typically, standard acknowledgments include financial support and technical assistance, and may include dedications, memorials, and awards. Check with the Editorial Office for suitability of an acknowledgment if there is any question. To indicate the auth or, use initials. For example, ―B.A. wishes to thank A. Loudon for technical assistance. C.A. wishes to thank Anytown University for use of their equipment.‖

Note: the Acknowledgment section should be set as your last paragraph of text before the references.

APPENDIX

Appendixes are not permitted in Applied Physics Letters.

REFERENCES

References maybe styled as numerical, bibliographic, or numerical bibliographic.Duplicate references are not permitted.

Note that numerical referencesshouldbe numbered consecutively in order of first appearance in the text and should be given in a separate double-spaced list at the end of the text material.A numerical reference may be cited within other references; however, it must also be cited at least once in the main body of the paper.

See Table III for acceptable reference formats.

TABLE III.This table provides instructions on how to prepare references.

to books and journal articles, listed at the end of the paper, should appear in one of these

formats:

(1) Numerical: By number, in the order of first appearance, giving the names of the authors, the

53V. Bargmann, Proc. Natl. Acad. Sci. USA 38, 961 (1952).

This paper will be listed as the 53rd in the list of references and cited as 53.

(2) Bibliographic:In alphabetical order according to the first author's last name, giving, in addition to the name, volume, year, and first and last page, also the title of the paper cited, as in:

Bargmann, V., "On the number of bound states in a central field of force,"' Proc. Natl. Acad. Sci. USA 38, 961–966 (1952).

Within the body of the paper, this reference will be cited as "Bargmann (1952)." If there are several articles by the same author(s) and the same year, they should be distinguished by letters, as in (1952a).

(3) Numerical Bibliographic: Alphabetically listed references (with full titles and page ranges) may be numbered according to their alphabetical order and cited by their number.

1Berger, A., "Instabilities and waves on a columnar vortex in a strongly stratified and rotating fluid,"' Phys. Fluids 25, 961–966 (2013).

Articles “submitted to” or “accepted for publication” (but not yet published) in a journal must include article title: When possible, these references should be updated in

the galley proof.

Samples of Numerical References:

Books: List authors and editors. Must include publisher, city and year of publication, and the page numbers (unless the entire book is being cited).

2R. J. Hunter, Zeta Potential in Colloid Science (Academic, New York, 1981) p.120.

AIAA Papers:AIAA Papers: The usual format is: {Author’s names}, {Paper Title}, AIAA Pap. {usual formats are 99-1111 or 2004-2222}, {year -- corresponds to numbers on left side of paper number}..

3M.S. Narayan and A. Banaszuk, ―Experimental study of a novel active separation control approach,‖ AIAA Paper No. 2003-0060, 2003.

Conference proceedings: Include the list of authors, the title of the proceedings, the city and year of the conference, the name of the publisher (cannot be a laboratory or institution), city and year of publication (or the words ―to be published‖), and the page numbers. Inclu de the full list of editors, if they are given.

4R. K. Ahrenkiel, in Gallium Arsenide and Related Compounds 1993: Proceedings of the 20th International Symposium on Gallium Arsenide and Related Compounds, Freiburg, Germany, 29 August–2 September 1993, edited by H. S. Rupprecht and G. Weimann (Institute of Physics, London, 1994), pp. 685–690.

Government publications:Format as for a book citation. Each must include the author(s), title of the publication, name of the publisher, city and year of publication, and page numbers (unless the entire publication is being cited).

5D. Nunes, The Brillouin Effect (U.S. Department of Energy, Washington, DC, 1992).

Journal citations: Include authors (see author rule above), volume number, beginning page number, and publication year:

6J. D. Kiely and J. E. Houston, Phys. Rev. B 57, 12588 (1998).

Laboratory report: May only be used if first deposited with a national depository such as the National Technical Information Service. (Check with the NTIS librarian at 703-605-6000.) Materials or reports in electronic form—codes, data tables,etc.—may be uploaded as supplementary material files (see Sec. XIII). If the paper is on deposit with NTIS, use the following format:

7See National Technical Information Service Document No. DE132450 L. (R. Newchuck, SESAME Tables, LANL Rep. 23453, 1983). Copies may be ordered from the National Technical Information Service, Springfield, VA 22161.

MOLPRO:

8H.-J. Werner, P. J. Knowles, R. Lindh, F. R. Manby, M. Schütz, et al., Molpro, version 2006.1, a package of ab initio programs, 2006, see https://www.wendangku.net/doc/5b636782.html,

Multiple citations are acceptable:

8D.-Y. Choi, S. Madden, A. Rode, R. Wang, and B. Luther-Davies, J. Non-Cryst. Solids354, 3179 (2008); J. Appl. Phys. 104, 113305 (2008).

(same authors, different journals)

or

9J.Scaroni and T. Mckee, Solid State Technol. 40, 245 (1997); M. G. Lawrence, Bull. Am. Meteorol. Soc. 86, 225 (2005).

(two completely different references)

or

10Y. de Carlan, A. Alamo, M. H. Mathon, G. Geoffroy, and A. Castaing, J. Nucl. Mater. 283–287, 762 (2000); M. H. Mathon, Y. de Carlan, G. Geoffroy, X. Averty, A. Alamo, and C. H. de Novion, ibid.312, 236 (2003).

(different authors, same journal)

Patents: Titles are allowed.

47K. Inoue, U.S. patent 3,508,029 (22 March 1970).

48 W. L. Tolin and A. M. Laud, U.S. patent pending (5 October 1996).

49 J. R. Smith, U.S. patent application 037/123,456 (18 May 2010).

Preprints and electronic postings:Preprints or eprints that have not been submitted to a journal for publication (i.e., are only posted on a preprint server) cannot be used as references.

Private communication:May not be one of the authors of the article. Must include the year in which the communication took place.

11A. Einstein (private communication, 1954).

Software manuals: If published, use the book format; if not published, give the entire address for the software maker.

Thesis/dissertation: Include the author, school, and year, but not the title.

12S. L. Goldschmidt, Ph.D. thesis, University of California, Los Angeles, 1985.

Web sites:

References containing URLs are permitted but should have additional explanatory text, as well as the date the website was last accessed.

1See https://www.wendangku.net/doc/5b636782.html,/hummingbird for more information about hummingbirds; accessed 28 July 2012.

2See https://www.wendangku.net/doc/5b636782.html,/ for ―Nanometer Pattern Generation Systems for Scanning Electron Microscopes‖ (last accessed April 15, 2013).

Elsevier上发表论文的要求中文版

转自小木虫 Elsevier上发表论文的若干要求 (2013-12-09 21:22:08) 转载▼ 标签： 分类：SCI期刊投稿 sci elsevier 投稿要求 it 发表SCI论文的人，恐怕没有人不知道Elsevier的吧，这个位于荷兰的出版社是世界上最大的科技期刊出版单位了。每年出版2,000 多种期刊和2,200种新书。例如青霉素的发现、伟哥的发明等等重大科学成果的发表，都是在Elsevier出版的。 发表外文和中文不太一样，感觉上外国人屁事挺多的，有些矫情。当然，也可以认为是人家编辑比较认真啦，商业规则很成熟，学术风气也比较正。所以想发表论文还是得按照人家的要求来办。 我想发篇论文，结果发现Elsevier的发表要求还是蛮复杂的。到网上看看有没有大侠翻译出来的中文版，结果没有找到合适的，有的人直接用翻译软件一翻译就挂到了网上，结果中文都不通顺，这怎么行？看来还是自己动手，丰衣足食吧。花了一天时间，把在Elsevier 上提交论文的基本要求翻译了一下。当然，本着积德行善的宗旨，供自用，也供大家方便。当然，本人英文水平达不到专业级，翻译中难免有些错误，希望大侠给予指正。此外，Elsevier 的每个期刊的要求不太一样，但也是大同小异，使用时需要分辨一下。祝你发表论文顺利。 利益冲突： 所有的投稿人都必须披露从其交稿前三年中可能产生不良影响的且与其工作相关的现实或潜在的利益纠纷，包括任何财务，个人或与其他人或其他组织的关系。参见 https://www.wendangku.net/doc/5b636782.html,/conflictsofinterest。 提交声明： 提交一篇文章意味着该文章所述工作尚未发布，（可以以摘要的形式发布，或作为学术演讲的形式发布），而且也没有考虑在其他地方出版。如果该文章被接受，它的出版需要得到所有作者和主管部门的同意。而且除非得到了版权持有人的书面同意，不能以其他形式出版（无论英文或其他语言，纸质还是电子版）。 作者保有的权利：

《中国科技论坛》投稿须知

一、作者应保证没有专稿的专投、模仿等学术违反行为和签名纠纷。本杂志社只接受网上提 交的稿件。 二、为协助匿名审查制度，作者在学术投稿时应将文章名称、基金项目、作者简介、通信地址、邮政编码、电子邮件、联系电话等放置在与本文内容独立的主页上，本文不得显示有关 作者的信息。否则，原稿将被推迟。 三、来稿篇幅最好在九千字以内的论文得到省、部级以上基金项目的支持，请注明基金名和 项目编号，尽可能提供中图分类编号和文献识别码，文章题目请使用中英文两种文字。 四、作者简介形式：姓名(出生年- )，性别，民族，出生地，岗位，职务，学历研究方向。 五、规范参考文献格式。本文中的引文、引文等，将参考文献编号用上标符号(例如[1] )标注，与句末的参考文献一一对应。 参考文献形式：专集[M]、论集[C]、学位论文[D]、报告[R]—[编号]主要负责人.文献标题[文 献类型标识] .出版地：出版者、出版年份.起始页码(可选) .期刊文章[J]—[编号]主要负责人.文 献标题[J] .出版名、年卷(期) :起始页编号.论文集中的析出文献-[编号]析出文献主要负责人.析 出文献标题[A] .原文献标题[C]出版地：出版者.出版年.析出文献起始页编号.新闻报道[N]—[编号]主要负责人.文献标题[N] .新闻名称.出版日(修订) .国际、国家基准-[编号]标准编号.标准名称[s] .专利-[编号] 专利所有者.专利标题[P] .专利国：专利号.出版日期. 电子文献：.电子期 刊[F/OL]，电子报纸[N/OL]，电子图书[M/OL]的书目形式，除了上述相关文献[J][N][M]的书 目形式以外，还包括引用日和具体的访问路径(ww ) . 电子公告[EB/OL]、在线数据库[DB]的 书目形式：作者.编名[EB/OL]、访问路径(网站)、(更新或修改日期) [引用日期]。 六、文章不用脚注。如果有特殊需要，文本中将显示少量的注释，并用括号括起来。 七、所有采用稿件均视为作者同意将稿件版权(包括各种媒体、媒体版权)转让给编辑部。招 聘后请先下载此协议，所有作者签署此协议后复印留下，然后将原件返回编辑部。

elsevier投稿模板

[Title Page] Article Title Authors Author affiliations Correspondence information: Corresponding author name, affiliation, detailed permanent address, email address, telephone number (Check the Guide for authors to see the required information on the title page)

Put the title of your abstract here using both upper and lower case letters, Times New Roman, 12 pts, bold, centered, double spaced A. Author a, B. Author b, C. Author a,* a Department, University, Street, Postal-Code City, Country b Laboratory, Institute, Street, Postal-Code City, Country Abstract This general template helps you on preparing manuscript for part of Elsevier Journals. Use this document as a template if you are using Microsoft Word 6.0 or later. Here comes self-contained abstract. Please read the Guide for Authors of your target journal for the requirements of Abstract. Pay special attention to the word count. PACS(optional, as per journal): 75.40.-s; 71.20.LP Keywords:Keyword 1.D; Keyword 2.B (Read the Guide for Authors for the requirements for Keywords, including number, thesaurus, and classification indications) * Corresponding author. Tel.: +xx xxx xx xx; fax: +xx xxx xx xx. E-mail address: xxxxx@xxx.xx

CSSCI中比较好发的刊物

求CSSCI中的垃圾刊物，要好发的 经济问题探索，华东经济管理，商业研究，统计与决策 科技管理研究、图书馆论坛 经济师，财会通讯比较好发。 南京社会科学，现代管理科学 商业研究好投些，统计与决策，管理现代化等等 cssci有些很垃圾的，比如科技管理研究 中国最最最最垃圾CSSCI期刊排行榜＊＊＊＊＊ 从别的网站转过来的，虽然不全了了解，但感觉挺有道理。和大家一起讨论一下。 1 科技管理研究不是C刊＊＊＊＊＊＊＊＊＊ 2 科技进步与对策＊＊＊＊＊＊＊＊科技进步与对策3000字左右1000元 3 生产力研究＊＊＊＊＊＊＊ 4 中国科技论坛＊＊＊＊＊＊＊ ５经济纵横＊＊＊＊＊＊＊＊＊＊ ６财经理论与实践＊＊＊＊＊＊＊ ７经济经纬＊＊＊＊＊＊＊ ８中国国情国力＊＊＊＊＊＊ ９统计与决策＊＊＊＊＊＊＊＊＊ １０求索／江西社会科学／国际贸易问题／旅游科学＊＊＊＊＊＊＊＊＊＊ 中国最最最最垃圾权威期刊排行榜 １财政研究＊＊＊＊＊＊＊＊＊（非学术刊物，一般刊物水平） ２保险研究＊＊＊＊＊＊＊＊＊（非学术刊物，一般刊物水平） ３旅游学刊＊＊＊＊＊＊＊＊＊（非学术刊物，一般刊物水平） ４经济管理．新管理＊＊＊＊＊＊＊＊（自从换成半月刊后，我就再也没有看过了）５投资研究／审计研究＊＊＊＊＊＊＊（不伦不类） ６税务研究＊＊＊＊＊＊＊＊＊＊（非学术刊物，一般刊物水平） ７中国农村经济＊＊＊＊＊＊＊＊＊（社会主义农村大字报） ８人民日报／光明日报／经济日报／求是／马克思主义／科学社会主义／党建研究（尽是怪胎鬼扯，尤其报子上的１８００－２０００来字的空洞废话－－－－－－－－－－－－这些作者全是投机分子，这样的东西敢拿出来当成果并得到了承认确实是中国特色的悲哀和耻辱，闹到关外去绝对是国际笑话）＊＊＊＊＊＊＊＊＊＊＊＊＊＊ 个人认为，国际贸易问题应该是好期刊吧。 个人以为“中国科技论坛”还是有不少好文章的，比“研究与发展管理”要强；“科技进步

Elsevier上发表论文的若干要求

Elsevier上发表论文的若干要求 这年头想博士毕业，就必须发SCI了，不管这样是否科学合理，反正西交大的要求就是如此。而且论文是按个来算的，也就是说爱因斯坦相对论的论文和张征凯的论文在教务老师的眼里都差不多，都是一个。等将来论文发的多了，说不定就可以按斤来算。呵呵，发发牢骚而已。 发表SCI论文的人，恐怕没有人不知道Elsevier的吧，这个位于荷兰的出版社是世界上最大的科技期刊出版单位了。每年出版2,000 多种期刊和2,200种新书。例如青霉素的发现、伟哥的发明等等重大科学成果的发表，都是在Elsevier出版的。 发表外文和中文不太一样，感觉上外国人屁事挺多的，有些矫情。当然，也可以认为是人家编辑比较认真啦，商业规则很成熟，学术风气也比较正。所以想发表论文还是得按照人家的要求来办。 我想发篇论文，结果发现Elsevier的发表要求还是蛮复杂的。到网上看看有没有大侠翻译出来的中文版，结果没有找到合适的，有的人直接用翻译软件一翻译就挂到了网上，结果中文都不通顺，这怎么行？看来还是自己动手，丰衣足食吧。花了一天时间，把在Elsevier 上提交论文的基本要求翻译了一下。当然，本着积德行善的宗旨，供自用，也供大家方便。当然，本人英文水平达不到专业级，翻译中难免有些错误，希望大侠给予指正。此外，Elsevier 的每个期刊的要求不太一样，但也是大同小异，使用时需要分辨一下。祝你发表论文顺利。Ethics in Publishing For information on Ethics in Publishing and Ethical guidelines for journal publication see http: //https://www.wendangku.net/doc/5b636782.html,/publishingethics and https://www.wendangku.net/doc/5b636782.html,/ethicalguidelines. 出版物中的伦理问题： 有关出版中伦理道德的信息参见https://www.wendangku.net/doc/5b636782.html,/publishingethics和 https://www.wendangku.net/doc/5b636782.html,/ethicalguidelines中的伦理准则。 Conflict of interest All authors are requested to disclose any actual or potential conflict of interest including any finan cial, personal or other relationships with other people or organizations within three years of beginn ing the submitted work that could inappropriately influence, or be perceived to influence, their wo rk. See also https://www.wendangku.net/doc/5b636782.html,/conflictsofinterest. 利益冲突： 所有的投稿人都必须披露从其交稿前三年中可能产生不良影响的且与其工作相关的现实或潜在的利益纠纷，包括任何财务，个人或与其他人或其他组织的关系。参见 https://www.wendangku.net/doc/5b636782.html,/conflictsofinterest。 Submission declaration Submission of an article implies that the work described has not been published previously (excep t in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly o r explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any oth er language, without the written consent of the copyright-holder. 提交声明：

CSSCI比较好发刊物汇总

刊物汇总CSSCI 经济问题探索，华东经济管理，商业研究，统计与决策 科技管理研究、图书馆论坛 经济师，财会通讯比较好发。 南京社会科学，现代管理科学 商业研究好投些，统计与决策，管理现代化等等 cssci有些很垃圾的，比如科技管理研究 中国最最最最垃圾CSSCI期刊排行榜＊＊＊＊＊ 从别的网站转过来的，虽然不全了了解，但感觉挺有道理。和大家一起讨论一下。 1 科技管理研究不是C刊＊＊＊＊＊＊＊＊＊ 2 科技进步与对策＊＊＊＊＊＊＊＊科技进步与对策3000字左右1000元 3 生产力研究＊＊＊＊＊＊＊ 4 中国科技论坛＊＊＊＊＊＊＊ ５经济纵横＊＊＊＊＊＊＊＊＊＊ ６财经理论与实践＊＊＊＊＊＊＊ ７经济经纬＊＊＊＊＊＊＊ ８中国国情国力＊＊＊＊＊＊ ９统计与决策＊＊＊＊＊＊＊＊＊ １０求索／江西社会科学／国际贸易问题／旅游科学＊＊＊＊＊＊＊＊＊＊ 中国最最最最垃圾权威期刊排行榜 １财政研究＊＊＊＊＊＊＊＊＊（非学术刊物，一般刊物水平） ２保险研究＊＊＊＊＊＊＊＊＊（非学术刊物，一般刊物水平） ３旅游学刊＊＊＊＊＊＊＊＊＊（非学术刊物，一般刊物水平） ４经济管理．新管理＊＊＊＊＊＊＊＊（自从换成半月刊后，我就再也没有看过了）５投资研究／审计研究＊＊＊＊＊＊＊（不伦不类） ６税务研究＊＊＊＊＊＊＊＊＊＊（非学术刊物，一般刊物水平） ７中国农村经济＊＊＊＊＊＊＊＊＊（社会主义农村大字报） ８人民日报／光明日报／经济日报／求是／马克思主义／科学社会主义／党建研究（尽是怪胎鬼扯，尤其报子上的１８００－２０００来字的空洞废话－－－－－－－－－－－－这些作者全是投机分子，这样的东西敢拿出来当成果并得到了承认确实是中国特色的悲哀和耻辱，闹到关外去绝对是国际笑话）＊＊＊＊＊＊＊＊＊＊＊＊＊＊ 个人认为，国际贸易问题应该是好期刊吧。 个人以为“中国科技论坛”还是有不少好文章的，比“研究与发展管理”要强；“科技进步与对策”则是一篇有用的文章都没有，应该再加两个星。 接受电子投稿的CSSCI来源期刊(经济管理类) [复 中国科技论坛 管理现代化 中国行政管理 中国人力资源开发 hrdchina@https://www.wendangku.net/doc/5b636782.html, 未来与发展 科技进步与对策 马克思主义与现实

在Elsevier上发表文章的作者指南

作者指南 自由模式 在你开始之前 出版业的道德规范 有关出版业道德规范的信息参见A和A中的伦理准则。 利益冲突： 所有的投稿人都必须披露从其交稿前三年中可能产生不良影响的且与其工作相关的现实或潜在的利益纠纷，包括任何财务，个人或与其他人或其他组织的关系。参见A，更深层次的信息的利益冲突的形式可参见A. 提交声明和核实 提交一篇文章意味着该文章所述工作尚未发布，（可以以摘要的形式发布，或作为学术演讲的一部分的形式，或者以学术论文，或者以电子预定本的形式发布，参见A），而且也没有考虑在其他地方出版。如果该文章被接受，它的出版需要得到所有作者和主管部门的同意。而且除非得到了版权持有人的书面同意，不能以同样的形式出版（无论英文或其他语言，纸质还是电子版）。为了证明独创性，你的文章可能被独创性检测服务测试检验，参见A。 对作品来源作者的改变 这一政策是关于已被接受的原稿中作者名字的增添，删减以及名字顺序的重排。

在被接受的稿件发表在网上之前，对于增添，删减，或重排作者名字的要求，必须发送到被接受稿件中有关作者的杂志管理者处，其内容必须包括(a) 作者名字被增加，删减或被重排的原因(b) 所有同意名字增添，删减，或重排的作者的书面确认（电子邮件，传真，信函），在作者被增添或删除的情况中，包括被增添或删改的作者的确认。那些要求没有发送给相关作者而是由相关作者的杂志管理员提出的人，必须遵循的步骤，注明（1）杂志管理者是由杂志主编告知这一要求（2）直到作者同意，被接受的稿件才能发表到网上。 在被接受的稿件发表到网上之后：任何对于被发表文章中作者名字的增添，删减和重排的要求，将同样遵循上述政策并注明此处为被更改后的结果。 文章转接服务 这本杂志是文章转接服务中的一方。这意味着如果主编感觉你的文章更适合于我们同盟杂志中的任何一家，你将被建议考虑转投给这种另外一家杂志。如果你同意，将自动以您的名义并不需要任何改动，更多的信息您可以参考A. 版权 该杂志提供作者对于发表的他们研究的选择：开放式访问或订阅。 对于订阅的文章

elsevier期刊投稿须知

https://www.wendangku.net/doc/5b636782.html,/infman/登录系统 https://www.wendangku.net/doc/5b636782.html,/wps/find/journaldescription.cws_home/505553/authorinstructions 用户投稿手册 Use of wordprocessing software It is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column format.Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. When preparing tables, if you are using a table grid, u se only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier: https://www.wendangku.net/doc/5b636782.html,/guidepublication). Note that source files of figures, tables and text graphics will be required whether or not you embed your figures in the text. See also the section on Electronic artwork. To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check' functions of your wordprocessor. Article structure Authors should use a scientific/engineering attitude towards their analyses. The numbers computed should have the appropriate number of significant figures. Please do not use more significant figures than the observations allow (i.e., for most surveys 2 or 3 are sufficient). Decimal fractions should have a leading zero, e.g. 0.001 rather than .001 Authors are encouraged to look at the articles recently published inthe journal to understand the aims of the journal. Essential title page information ? Title.Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible. ? Author names and affiliations.Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and,if available, the e-mail address of each author. ? Corresponding author.Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that

Elsevier上发表论文的作者须知

Elsevier上发表论文的作者须知-——中英文011-03-25 13:35:11 Elsevier上发表论文的若干要求 发表SCI论文的人，恐怕没有人不知道Elsevier的吧，这个位于荷兰的出版社是世界上最大的科技期刊出版单位了。每年出版2,000 多种期刊和2,200种新书。例如青霉素的发现、伟哥的发明等等重大科学成果的发表，都是在Elsevier出版的。 发表外文和中文不太一样，感觉上外国人屁事挺多的，有些矫情。当然，也可以认为是人家编辑比较认真啦，商业规则很成熟，学术风气也比较正。所以想发表论文还是得按照人家的要求来办。 我想发篇论文，结果发现Elsevier的发表要求还是蛮复杂的。到网上看看有没有大侠翻译出来的中文版，结果没有找到合适的，有的人直接用翻译软件一翻译就挂到了网上，结果中文都不通顺，这怎么行？看来还是自己动手，丰衣足食吧。花了一天时间，把在Elsevier 上提交论文的基本要求翻译了一下。当然，本着积德行善的宗旨，供自用，也供大家方便。当然，本人英文水平达不到专业级，翻译中难免有些错误，希望大侠给予指正。此外，Elsevier 的每个期刊的要求不太一样，但也是大同小异，使用时需要分辨一下。祝你发表论文顺利。 利益冲突： 所有的投稿人都必须披露从其交稿前三年中可能产生不良影响的且与其工作相关的现实或潜在的利益纠纷，包括任何财务，个人或与其他人或其他组织的关系。参见。 提交声明： 提交一篇文章意味着该文章所述工作尚未发布，（可以以摘要的形式发布，或作为学术演讲的形式发布），而且也没有考虑在其他地方出版。如果该文章被接受，它的出版需要得到所有作者和主管部门的同意。而且除非得到了版权持有人的书面同意，不能以其他形式出版（无论英文或其他语言，纸质还是电子版）。 作者保有的权利： 作为作者（或作者的雇主、机构），您将保留一定的权利，详细情况请参见：。 对资金来源的作用 请确定谁为研究提供金融支持，或为文章的准备工作提供帮助，并简要介绍赞助者在文章撰写工作中的作用，诸如研究方案设计、数据收集、分析和解释，报告的撰写，以及决定文章提交等等。请参阅。

Elsevier投稿的一些问题

关于Elsevier旗下期刊投稿1 关于Elsevier旗下期刊投稿概述 (1) Elsevier旗下共有1300多种期刊。投稿时采用的是Elsevier Editorial System (EES)投稿系统 (2) 审稿时间。通常不会超过半年，如果半年时间到，部分审稿意见没有返回，期刊社同样会把已返回的意见返回给你。 (3) 版权问题。一般会通过给你发几个PDF合同，然后你打印出来，用手填写，然后邮寄或者扫描后通过email发给他们。 (4) 投稿模板。通常很多人都会关心这个问题，这是投稿的第一步。但是Elsevier 旗下期刊对投稿的模板没什么要求，只要你比较注意排版，看着舒服就好。至于排版，录用后他们编辑会排版，然后让你来校正。建议，投稿时候不要考虑纸张页数，国外期刊不太关心期刊页数，只要按他们最后的排版不超过30页（好像是30页）一般不会收钱。(5) 如果投稿论文分成几个部分，在投稿的时候就要分开，按照单独的论文投稿。不过要在Letter to Editor中要说明这是同一个论文。 (6) Elsevier旗下期刊投稿不收取审稿费，发表也不收取版面费，但超过一定页数会适当收取费用，如果用彩色印刷，也会收钱，他们不收则以，一收就比较多。 (7) 投稿时是否需要把图片和论文主题分开。这个本来不需要说的，网站上的要求就是如此，需要单独分开上传，但是以我的经验，如果论文图太多，特别是对于国内的网速慢，上传很不方便，可以直接把图放在论文中间，审稿阶段不用考虑图文分开，等录用后再图文分开。 2 Elsevier投稿状态总结 (1) Submitted to Journal 刚提交的状态 (2) Manuscript received by Editorial Office 就是你的文章到了编辑手里了，证明投稿成功 (3) With editor如果在投稿的时候没有要求选择编辑，就先到主编那，主编会分派给别的编辑。这当中就会有另两个状态： 1) Awaiting Editor Assignment指派责任编辑 Editor assigned是把你的文章分给一个编辑处理了。 2) Editor Declined Invitation 也可能编辑会拒绝邀请，这就需要重新指定编辑 3) technical check in progress 检查你的文章符不符合期刊投稿要求 (4) 编辑接手处理后也会有2种状态 1) Decision Letter Being Prepared 就是编辑没找审稿人就自己决定了， 2) Reviewer(s) invited 找到审稿人了，就开始审稿 (5) Under review 这应该是一个漫长的等待。当然前面各步骤也可能很慢的，要看编辑的处理情况。如果被邀请审稿人不想审，就会decline，编辑会重新邀请别的审稿人。 (6) Required Reviews Completed 审稿人的意见已上传，审稿结束，等待编辑决定 (7) uating Recommendation 评估审稿人的意见，随后你将收到编辑给你的decision (8) Minor revision/Major revision 这个时候可以稍微庆祝一下了，问题不大了，因为有修改就有可能。 (9) Revision Submitted to Journal. 又开始了一个循环。

从Elsevier的投稿指南可借鉴的东西

从Elsevier的投稿指南可借鉴的东西（1） Elsevier杂志的投稿指南，有人对其进行了全文翻译，尽管有些地方翻译的不是很恰当，但从中我们可以借鉴很多东西，如版权问题，一稿多投问题，图片要求问题等等。全文如下 Guide for Authors 指南作者 Submission of manuscripts 提交手稿 Types of contribution 类型的贡献 Original Research Papers should report the results of original research. 原始的研究论文，应在报告中说明结果的原始研究。The material should not have been previously published elsewhere, except in a preliminary form.该材料不应此前已在其他地方发表，除在初步形成。 Review Articles can cover either narrow disciplinary subjects or broad issues requiring interdisciplinary discussion. 审查条款可以涵盖或是狭隘学科交叉或广泛性问题，需要跨学科的讨论。They should provide objective critical uation of a defined subject.它们应当提供客观严谨的评价一项确定的主题。Reviews should not consist solely of a summary of published data.评语不应当仅仅一个简要的公布数据。uation of the quality of existing data, the status of knowledge, and the research required to advance knowledge of the subject are essential.质量评价现有的数据，地位，知识和研究所需的先进知识，主题是至关重要的。 Short Communications are used to communicate results which represent a major breakthrough or startling new discovery and which should therefore be published quickly. 短通讯用沟通的结果，这是一项重大突破或惊人的新发现，其中，因此应尽快公布。They should not be used for preliminary results.他们不应被用于了初步成效。Papers must contain sufficient data to establish that the research has achieved reliable and significant results.论文必须包含足够的数据，以确定他们的研究已取得了可靠的和明显的效果。 Technical Papers should present new methods and procedures for either research methodology or culture-related techniques. 技术文件，就应该把新的方法和程序，无论是研究方法或文化有关的技术。 The Letters to the Editor section is intended to provide a forum for discussion of aquacultural science emanating from material published in the journal.该读者来函节的用意是提供一个论坛，讨论的科学养殖产生的材料发表在杂志上。 Elsevier reserves the privilege of returning the author for revision accepted manuscripts and illustrations which are not in the proper form given in this guide. elsevier公司储备特权返回作者修改接受手稿和插图，这是不是在适当的形式给予在本指南。 Copyright 版权 Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all Authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher.提交一篇文章，言下之意，就是叙述的工作仍未公布以前（除在形式，是一个抽象或作为一个发表演讲或学术论文），它没有考虑到其他地方出版，它的

Elsevier期刊网上投稿指南(中文版PDF)

Elsevier期刊网上投稿指南一、ELSEVIER期刊介绍： ELSEVIER出版集团创建于1580年，是世界上著名学术期刊出版公司，也是全球最大的科学文献出版发行商。它由Academic Press、Bailliere Tindall、Churchill Livingstone、Editions scientifiques et medicales Elsevier、Elsevier、Elsevier Advanced Technology、Elsevier Current Trends、Excerpta Medica、JAI、Mosby、North-Holland、Pergamon、W.B. Saunders 等出版公司组成，总部位于荷兰。目前出版有2000多种学术期刊，主題涵盖了数学、物理、化学与化工、计算机、生物科学、环境科学、材料科学、工程与能源技术、经济、金融、商业管理、社会科学等28个領域，基本覆盖我校所有学科，为我校教师、研究生和科研人员提供了国际学术前沿最新的信息。 ELSEVIER出版的期刊不但数量多，其高品位的学术期刊在世界上也得到公认。据2005年统计数据表明，ELSEVIER期刊中被SCI收录的期刊有1,375种，被Ei收录的有522种。期刊影响因子最高的达到22.626。ELSEVIER服务系统还实现了与SCI和EI数据库从二次文献直接到Elsevier 全文的链接。

目前，ELSEVIER出版集团在清华大学和上海交通大学图书馆设立镜像服务器，向校园网用户提供电子期刊全文数据库－ScienceDirect OnSite （SDOS）的服务；该站点装载了1995年以来该公司出版的1,774种电子期刊全文数据,文章篇数达2,731,1741篇。读者也可以访问Elsevier美国主站点—ScienceDirect Online（SDOL）（https://www.wendangku.net/doc/5b636782.html,/）。SDOS和SDOL数据库均采用校园网范围的IP地址控制使用权限，不需要账号和口令，访问本地镜像和主站点都无需支付国际流量费。 从内容上比较，SDOS和SDOL数据库，收录的全文期刊是相同的，不同点在于：在SDOL上还能查阅200多种其合作出版商的期刊，但不能阅读全文；SDOL平台上的数据更新比SDOS快约2周~1个月；在功能上，在SDOS中除了浏览和检索外，没有其他功能；而SDOL可以浏览已经被Elsevier接受待出版的文章（Article in press）；有E-MAIL提示功能，HTML 格式的全文下载和链接，还提供建立个人检索历史，引用提示和个人期刊目录等个性化功能。 二、Elsevier期刊在线投稿介绍 Elsevier的刊物大都有自己的投稿规则，在投稿前，作者应仔细地阅读刊物上的“Guide for Authors”及其它相关信息，以便有针对性地投稿，提高命中率。Elsevier期刊投稿的有以下几种方式： 1、可以在Elsevier的“Author gateway上注册后（https://www.wendangku.net/doc/5b636782.html,），点击“submit online to this journal”按钮就可以对所选的期刊直接进行网上投稿； 2、对于某些不接受作者在Elsevier“Author gateway”上注册进行网上投

中国科技论坛退稿原因

《中国科技论坛》退稿的若干原因 可能录用的稿件要经过较长时间，才会最终决定是否录用。 有许多投稿很快就被编辑部退掉。 退稿的原因中，与稿件质量相关的大致有： （1）内容跟刊物无关。例如，本刊关注科技方面的事情，你的投稿是旅游营销，即使你的文章写得非常漂亮，我们也会只看标题就退稿。本刊刊登稿件的范围可参见“中国科技论坛刊登什么”。 （2）与本刊已发稿件类似。例如，本刊刚发一篇关于科技人才政策的回顾的文章，你的文章即使有些新意或者特点，仍然会很快被退稿。 （3）内容过于陈旧。例如，20年前我们关注科技指标设计的一般原则和方法，现在的投稿仍然是这些基本知识，因此会被直接退稿。 （4）分析缺乏深度。例如，一篇政策分析文章，只是简单的法规或者政策的罗列，没有思考；文章题目与内容不符，想以题目取胜，但内容乏善可陈。 （5）统计数据或者事实过于陈旧。例如，分析未来发展趋势，用的却是10年前的数据和早期的事实。 （6）无法实现的模型建构或者逻辑分析错误。论文的分析要符合逻辑，结论是分析的必然结果或者推论。数学模型建构成为时尚，但是论文建构了没有用的数学模型（找不到来自统计或者实证量化数据）。一大堆理论分析之后，结论不是分析的必然结果。 （7）实证分析的缺陷。例如，统计调查中过于小的样本量或者

样本不具有代表性，典型案例分析中明显的广告或者夸大事实的描述。或是前面理论介绍，后面在模型中代入一大批数字，得出的结果没有进行任何分析或仅一点分析，没有提出真正有意义的建议。 （8）对策建议没有针对性。没有对现有政策中存在的问题进行梳理，提一些不着边际或者过于宽泛的政策建议，或者提出的对策已经写在各种法律法规中。 （9）参考文献缺失。例如，一篇综述性的论文，却没有列出进行年内该领域中的经典文献，文献的来源也不是那些该领域有影响的期刊，明显反映出作者对该领域的不熟悉。 （10）文字过于粗糙。例如，对外国政策的介绍，翻译中明显的西化句子过多，让文章难以卒读；口语化较多的讲话稿式文章；文章的逻辑性不强，各个章节各为内容，没有关连性和连续性。 （11）明显的不端行为。例如抄袭，来稿内容似曾相识，上网络上一查，重复文字太多，可断定为抄袭。例如腊肠式发表，用同样的数学工具，改变一两个变量处理成若干文章投放，没有任何新颖的结论。或者整篇文章是将外国几篇报告内容直译过来，组成中文的一篇文章，抄袭成分比较大。 以下几条与作者的某一篇稿件质量没有直接关联，但仍然会被退稿。 （1）作者年度内投稿太多。为了作者的多元性，除特约稿和特别优秀的稿件外，本刊原则上一年内只发第一作者一篇文章。

《塔兰塔》投稿指南《Talanta》AUTHOR INFORMATION PACK(Elsevier)

TALANTA The International Journal of Pure and Applied Analytical Chemistry AUTHOR INFORMATION PACK TABLE OF CONTENTS ? Description ? Audience ? Impact Factor ? Abstracting and Indexing ? Editorial Board ? Guide for Authors p.1 p.2 p.2 p.2 p.2 p.4 ISSN: 0039-9140 DESCRIPTION Talanta provides a forum for the publication of original research papers, preliminary communications, and critical reviews in all branches of pure and applied analytical chemistry. Papers are evaluated based on established guidelines, including the fundamental nature of the study, scientific novelty, substantial improvement or advantage over existing technology or methods, and demonstrated analytical applicability. Original research papers on fundamental studies, and novel sensor and instrumentation development, are especially encouraged. Novel or improved applications in areas such as clinical and biological chemistry, environmental analysis, geochemistry, and materials science and engineering are welcome. Analytical performance of methods should be determined, including interference and matrix effects, and methods should be validated by comparison with a standard method, or analysis of a certified reference material. The developed method should especially comprise information on selectivity, sensitivity, detection limits, accuracy, and reliability. However, applying official validation or robustness studies to a routine method or technique does not necessarily constitute novelty. Proper statistical treatment of the data should be provided. Relevant literature should be cited, including related publications by the authors, and authors should discuss how their proposed methodology compares with previously reported methods. Since classical spectrophotometric measurements and applications (including derivative spectrophometry), fluorimetry, solvent extraction, titrimetry, chemometrics, etc. are well established and are considered routine analytical methods, studies in such areas should demonstrate a unique and substantial advantage over presently known systems. New reagents or systems should demonstrate clear advantage, and their presentation should be comprehensive rather than generating a series of similar papers for several analytes or similar reagents. Modifications of reagents should demonstrate significant improvements. Obvious application of known chemistries or methods to established instrumental techniques are discouraged. Application of established analytical approaches to relatively simple matrices having no major interferences, such as pharmaceutical preparations, are discouraged unless considerable improvements over other methods in the literature are demonstrated. Papers dealing with analytical data such as stability constants, pKa values, etc. should be submitted to more specific journals, unless novel analytical methodology is demonstrated, or important analytical data are provided which could be useful in the development of analytical procedures.